Snom Vision/Firmware

From Snom User Wiki

(Difference between revisions)
Jump to: navigation, search
(September 2015 - New Release Build 1.3.8 available)
Line 6: Line 6:
[[Image:step1.png|20px]]  '''Right-click''' on the following ''link'' and choose '''Copy shortcut''':
[[Image:step1.png|20px]]  '''Right-click''' on the following ''link'' and choose '''Copy shortcut''':
-
[http://provisioning.snom.com/download/fw/snom870E-1.2.5-SIP-r.bin latest official Firmware for snom Vision (approx. 30 MB)]
+
[http://downloads.snom.com/fw/snom870E-1.2.5-SIP-r.bin latest official Firmware for snom Vision (approx. 30 MB)]
[[Image:step2a.png|20px]] Open the '''Web User Interface''' and navigate to the '''Main Config page'''
[[Image:step2a.png|20px]] Open the '''Web User Interface''' and navigate to the '''Main Config page'''
Line 19: Line 19:
== TFTP update ==
== TFTP update ==
-
Download the [http://provisioning.snom.com/download/fw/snom870E-1.2.5-SIP-r.bin firmware image], save image binary as 'snomVision-r.bin' and put it in the default TFTP update path on the local machine. On snom Vision: Press left control key (bottom left next to '<' symbol), unplug & replug power while holding down the key for 15 secs. The device will go into rescue mode on start-up. Follow the instructions on the screen to either reset the device completely or make a firmware upgrade.
+
Download the [http://downloads.snom.com/fw/snom870E-1.2.5-SIP-r.bin firmware image], save image binary as 'snomVision-r.bin' and put it in the default TFTP update path on the local machine. On snom Vision: Press left control key (bottom left next to '<' symbol), unplug & replug power while holding down the key for 15 secs. The device will go into rescue mode on start-up. Follow the instructions on the screen to either reset the device completely or make a firmware upgrade.
== <span style="color:darkgreen">September 2015 - New Release Build 1.3.8 available</span>==
== <span style="color:darkgreen">September 2015 - New Release Build 1.3.8 available</span>==

Revision as of 12:16, 23 November 2015

Languages: English • Deutsch

Firmware Update

  1. Check the release notes for version 1.2.5 carefully!
  2. Perform the update from V1.2.x to Version 1.2.5 following the steps below:

Right-click on the following link and choose Copy shortcut: latest official Firmware for snom Vision (approx. 30 MB)

Open the Web User Interface and navigate to the Main Config page

Paste the link into the Firmware URL field as shown below:
Image:Vision_fw_update.png

Click Start Update --> The device reboots and performs the firmware update.

Note: Do not disconnect the power during the update process!

TFTP update

Download the firmware image, save image binary as 'snomVision-r.bin' and put it in the default TFTP update path on the local machine. On snom Vision: Press left control key (bottom left next to '<' symbol), unplug & replug power while holding down the key for 15 secs. The device will go into rescue mode on start-up. Follow the instructions on the screen to either reset the device completely or make a firmware upgrade.

September 2015 - New Release Build 1.3.8 available

  • Check the updated user manual for further information.
Personal tools
Interoperability