Settings/vlan id

From Snom User Wiki

< Settings(Difference between revisions)
Jump to: navigation, search
(Automatically added category PA1)
 
Line 1: Line 1:
-
{{sptemplate|fv1=7|fv2=8||cat1=snom3x0|cat2=snom8xx|cat3=System|cat4=Require Reboot|cat5=VLAN|howto1=VLAN}}
+
{{sptemplate|fv1=7|fv2=8||cat1=snom3x0|cat2=snom8xx|cat3=System|cat4=Require Reboot|cat5=VLAN|cat6=snom PA1|howto1=VLAN}}

Latest revision as of 10:09, 15 August 2011

WEB USER INTERFACE
V7: In Version 7, this setting is only used internally. It cannot be changed in the user interface. Instead, please use setting vlan
V8: Advanced - QoS/Security (Tab) - VLAN (Section): VLAN Id
PHONE USER INTERFACE
V7 V8
Snom300: Navigation Key Down - VLAN Settings
Snom320: Navigation Key right or press "Settings" - VLAN Settings
Snom360: press "Settings" - Network
Snom370: press "Settings" - Network
Snom820: press "Menu" - Network/VLAN
Snom870: press "Menu" - Network/VLAN
FIRMWARE VERSIONS
V7  V8  
XML CONFIGURATION
<vlan_id perm="PERMISSIONFLAG">VALIDVALUE</vlan_id>
DESCRIPTION
This setting has to be set properly before the phone is able to connect to anything residing in a specific VLAN ! Only the phone is residing in the specified VLAN, it has no effect to e.g. a PC connected with the second ethernet socket (PC).
The VLAN tagging is done by the kernel (as opposed to vlan_net_id, which activates tagging by the phone's integrated switch).
VALIDVALUE
1..4094 (Attention: On the snom710, VLAN IDs 4092 and 4093 are not available for use.)
DEFAULTVALUE
blank
FURTHER INFORMATION
VLAN
Personal tools
Interoperability