Settings/transfer on hangup with starcode

From Snom User Wiki

< Settings
Revision as of 10:13, 15 August 2011 by Phpscript (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
WEB USER INTERFACE
V8: Advanced - Behavior (Tab) - Keys (Section): Transfer picked up calls
PHONE USER INTERFACE
N/A
FIRMWARE VERSIONS
V8  
XML CONFIGURATION
<transfer_on_hangup_with_starcode perm="PERMISSIONFLAG">VALIDVALUE</transfer_on_hangup_with_starcode>
DESCRIPTION
If setting 'transfer on hangup' is set to on and the first call was picked up with a PBX starcode then the transfer will be done if this setting is set to on. Info: a picked up call with starcode is an outgoing call. But an incoming and an outgoing call is the condition for the 'transfer on hangup'.
VALIDVALUE
on
off
DEFAULTVALUE
off
FURTHER INFORMATION
Transfer
Personal tools
Interoperability