Settings/pickup indication
From Snom User Wiki
- WEB USER INTERFACE
- V6: Advanced - Audio (Section): Audio indication for Dialog-Info Call Pickup
- V7: Advanced - Audio (Tab) - Audio(Section):Audio indication for Dialog-Info Call Pickup
- V8: Advanced - Audio (Tab) - Audio(Section):Audio indication for Dialog-Info Call Pickup
- PHONE USER INTERFACE
- N/A
- FIRMWARE VERSIONS
- V6 V7 V8
- XML CONFIGURATION
- <pickup_indication perm="PERMISSIONFLAG">VALIDVALUE</pickup_indication>
- DESCRIPTION
- Plays an acoustic indication when a call pickup is available.
- In order for this to work, the setting callpickup_dialoginfo has to be switched on in advance. (until firmware version 8.7.2.x) In firmware versions > 8.7.2.x goto_monitor_state_on_line_activity needs to be enabled in order to activate acoustic pick up indication.
- This only works when there are no active calls.
- Removed with 8.7.5 and replaced by value 'CallForPickupAvailable:10/2' in the new setting status_msgs_with_audio_indication.
- With 8.7.5 the setting goto_monitor_state_on_line_activity isn't anymore required for the audio indication.
- VALIDVALUE
- on
- off
- DEFAULTVALUE
- off
- FURTHER INFORMATION
- Call Pickup
Categories: Setting:V6 | Setting:V7 | Setting:V8 | Setting:snom3x0 | Setting:snom8xx | Setting:snom MP | Setting:Call Pickup | Setting:Indication Tone | Setting:snom PA1
Products > Audio
Products > Features > Audio features > Indication Tone
Products > Features > Calling features > Call Pickup
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting > Setting:Call Pickup
Products > Firmware > Setting > Setting:Indication Tone
Products > Firmware > V6 > Setting:V6
Products > Firmware > V7 > Setting:V7
Products > Firmware > V8 > Setting:V8
Products > IP phones > Snom3x0 > Setting:snom3x0
Products > IP phones > Snom8xx > Setting:snom8xx
Products > SIP conference phone > Snom MeetingPoint > Setting:snom MP
Products > SIP paging > Snom PA1 > Setting:snom PA1