Settings/multicast listen
From Snom User Wiki
- WEB USER INTERFACE
- V7: Advanced - SIP/RTP (Tab) - Multicast(Section): Multicast Support
- V8: Advanced - SIP/RTP (Tab) - Multicast(Section): Multicast Support
- PHONE USER INTERFACE
- N/A
- FIRMWARE VERSIONS
- V7 V8
- XML CONFIGURATION
- <multicast_listen perm="PERMISSIONFLAG">VALIDVALUE</multicast_listen>
- DESCRIPTION
- If enabled, the phone receives RTP G.711 u-law (20 ms) packets sent to the given multicast addresses and plays them out. It can be used for listening, in handsfree mode, for streaming audio broadcasts or public announcements etc.
- VALIDVALUE
- <on>, <off>
- DEFAULTVALUE
- off
- FURTHER INFORMATION
- Multicast Audio
RTP
Categories: Setting:V7 | Setting:V8 | Setting:snom3x0 | Setting:snom8xx | Setting:snom MP | Setting:Multicast Audio | Setting:RTP | Setting:snom PA1
Products > Audio
Products > Features
Products > Features > Audio features
Products > Features > Calling features > Multicast Audio
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting > Setting:Multicast Audio
Products > Firmware > Setting > Setting:RTP
Products > Firmware > V7 > Setting:V7
Products > Firmware > V8 > Setting:V8
Products > IP phones > Snom3x0 > Setting:snom3x0
Products > IP phones > Snom8xx > Setting:snom8xx
Products > Network > RTP
Products > SIP conference phone > Snom MeetingPoint > Setting:snom MP
Products > SIP paging > Snom PA1 > Setting:snom PA1