Settings/filter registrar
From Snom User Wiki
< Settings
- WEB USER INTERFACE
- V6: Advanced - Advanced Network (Section): Filter packets from Registrar
- V7: Advanced - QoS/Security (Tab) - Security(Section):Filter packets from Registrar
- V8: Advanced - QoS/Security (Tab) - Security(Section):Filter packets from Registrar
- PHONE USER INTERFACE
- N/A
- FIRMWARE VERSIONS
- V6 V7 V8
- XML CONFIGURATION
- <filter_registrar perm="PERMISSIONFLAG">VALIDVALUE</filter_registrar>
- DESCRIPTION
- If set to “on”, all SIP packets not coming from the registrar/proxy will be ignored. For security reasons, “on” is the default setting. This may cause big problems in an environment where SIP packets from other sources also have to be accepted for proper functionality! You have to disable it to make a call flow work which isn't going via the proxy only !
- Note: Even in case you set Registrar or Outbound Proxy to an FQDN that resolves in multiple IPs, only the IP used to send the REGISTER to will match
- VALIDVALUE
- on
- off
- DEFAULTVALUE
- on
- FURTHER INFORMATION
- Secure SIP
Categories: Setting:V6 | Setting:V7 | Setting:V8 | Setting:snom3x0 | Setting:snom8xx | Setting:snom MP | Setting:Secure SIP | Setting:snom PA1
Products > Features
Products > Features > Security features > Secure SIP
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting > Setting:Secure SIP
Products > Firmware > V6 > Setting:V6
Products > Firmware > V7 > Setting:V7
Products > Firmware > V8 > Setting:V8
Products > IP phones > Snom3x0 > Setting:snom3x0
Products > IP phones > Snom8xx > Setting:snom8xx
Products > Network > SIP
Products > SIP conference phone > Snom MeetingPoint > Setting:snom MP
Products > SIP paging > Snom PA1 > Setting:snom PA1