Settings/dkey transfer
From Snom User Wiki
< Settings
- WEB USER INTERFACE
- V6: Function Keys - Pre-Programmed Function Keys(Section):Transfer
- V7: Function Keys - Pre-Programmed Function Keys(Section):Transfer
- V8: Function Keys - Pre-Programmed Function Keys(Section):Transfer
- PHONE USER INTERFACE
- N/A
- FIRMWARE VERSIONS
- V6 V7 V8
- XML CONFIGURATION
- <dkey_transfer perm="PERMISSIONFLAG">VALIDVALUE</dkey_transfer>
- DESCRIPTION
- This is the value preprogrammed for the function key labeled "Transfer".
- VALIDVALUE
- see this table
- DEFAULTVALUE
- keyevent F_TRANSFER
- FURTHER INFORMATION
- Function Keys
Transfer
Categories: Setting:V6 | Setting:V7 | Setting:V8 | Setting:snom3x0 | Setting:snom8xx | Setting:snom MP | Setting:Function Keys | Setting:Transfer
Keypad > Keypad > Function Keys
Products > Features > Calling features > Transfer > Setting:Transfer
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting > Setting:Function Keys
Products > Firmware > V6 > Setting:V6
Products > Firmware > V7 > Setting:V7
Products > Firmware > V8 > Setting:V8
Products > Hardware
Products > IP phones > Snom3x0 > Setting:snom3x0
Products > IP phones > Snom8xx > Setting:snom8xx
Products > SIP conference phone > Snom MeetingPoint > Setting:snom MP