Settings/cert provisioning service
From Snom User Wiki
< Settings
- WEB USER INTERFACE
- N/A
- PHONE USER INTERFACE
- N/A
- FIRMWARE VERSIONS
- V8
- Starting versions: 8.8.1
- XML CONFIGURATION
- <cert_provisioning_service perm="PERMISSIONFLAG">VALIDVALUE</cert_provisioning_service>
- DESCRIPTION
- This setting applies only to the UC edition. It is used to store the HTTP address of the certificate provisioning service provided in option 43 of the DHCP response. The phone will query for this information on start-up by broadcastig a DHCP INFORM message with the vendor class identifier (option 60) set to "MS-UC-Client" (UC edition only). This setting may be provisioned manually if the phone is in an environment where the DHCP server does not provide this information, however if the server response does contain the requested information, the setting will be overwritten. Without this setting sign-in with extension number and PIN is not possible.
- VALIDVALUE
- HTTP URI
- DEFAULTVALUE
- None.
- FURTHER INFORMATION
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > V8 > Setting:V8
Products > IP phones > Snom3x0 > Setting:snom3x0
Products > IP phones > Snom7xx > Setting:snom7xx
Products > IP phones > Snom8xx > Setting:snom8xx
Products > SIP conference phone > Snom MeetingPoint > Setting:snom MP