Firmware/V8/Release Notes/Change Log V8

From Snom User Wiki

< Firmware | V8 | Release Notes
Revision as of 15:05, 28 March 2011 by Af@snom.de (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Change Log between 8.X and 7.3 branch

Features

8.7.3.25 New Features

NETWORK
SCPP-5130: WLAN - Support for 802.11N
WUI
SCPP-5131:Block/Allow dialing from WUI or via HTTP requests based on new setting dial_from_wui
HEADSET
SCPP-5138: USB HID thread integration to avoid blocking of phone software

8.7.3.23 New Features

PUI
SCPP-4905: Hot Desking - Identities have a new setting user_no_auto_logoff which defines that the identity is not deleted during Logoff all. This can be used e.g. for emergency lines.

8.7.3.22 New Features

AUDIO
SCPP-3224: Implementation of dtmf_volume setting for all phone types
SCPP-2338: new setting dtmf_handset_phone to disable DTMF tones during call initiation in handset mode
XML BROWSER
SCPP-4978: Broadsoft/BLF/Call Park Indicator/Call Park Pickup in Buddy List XML Definition
  • XML Buddy key now also signals a parked buddy and allows to retrieve it

8.7.3.19 New Features

AUDIO
SCPP-3988: exclusive early-media / local ringback playback
SCPP-4491: new setting to define which numbers will cause a secondary dial tone: secondary_dialtone_when
SCPP-15: if a headset is used, ringing tone should be audible both on headset AND speaker (optional)
Added entry Use Headset and Speaker to pull down menu so there now are three available options:
  • Use Headset
  • Use Speaker
  • Use Headset and Speaker
PUI
SCPP-4488: Add new language LT (Lithuanian)
SCPP-4462: implementation of contact_source_priority
SCPP-4390: New field Action URL added to the internal address book.
The field defines a URL that is fetched on in/outgoing calls for that contact and should return an XML.
It is possible now to connect a video camera (e.g. door phone) and automatically fetches the XML and therefore show the mjpeg stream when e.g. the door phone calls the reception. The XML/mjpeg is also fetched for outgoing call, so it is possible to call a surveillance camera or the door phone. But the contact with the URL must be stored in the internal address book.
NETWORK
SCPP-4396: New time zone Lithuania added

8.7.3.15 New Features

PROVISIONING
SCPP-4392: When using PnP the phone should be able to process NOTIFYs at every time (currently limited to 5 seconds after the SUBSCRIBE has been sent)
SCPP-3064: SIP MESSAGE can be used to send settings to the phone
PUI
SCPP-4314: Improved function key type handling
SCPP-3874: Implemented joined call screens for 710/720
SCPP-4215: Call-screen view can be configured whether the incoming or the active call has priority using always_show_active_call setting. Screen shows the prioritized call.
SCPP-4103: added setting offhook_accept_calls to disable answering a call on off hook
SCPP-4235: New identity-based setting remote_contact_header_field to control whether "From" header URI or "Contact" header URI are stored in the call list
SCPP-4182: It is now possible to click on the details button when having the missed-message selected in status Message view. The phone will then show all missed calls
SIP
SCPP-4326: Add support for server based DND for Metaswitch
XML
SCPP-4097: add a dtmf-action to the action tag list.
NETWORK
SCPP-3990: IPV4 conflict detection should be VLAN aware
AUDIO
SCPP-3926: Implement headset usage with serial EHS box for snom 710
SETTINGS
SCPP-4172: added values "snomONE" and "SUTUS BC" for user_server_type

8.7.3.10 New Features

AUDIO
SCPP-3719: Implement music on hold, which should be send from the phone itself
WUI
SCPP-3737: Long key press via web interface (Enhancement of command.htm?key=... according to the following syntax command.htm?key=<key>[,<long_press_timeout_ms[,pause_after_key_ms]];...)
SCPP-3745: Provide state of identities and lines in web interface (http://[Phone IP]/state_of_identity.htm)
SCPP-3755: Provide LED status information in web interface
  • New section LEDS is appended to the end of the state_of_gui.htm page. The first row shows the title of the fields (number, frequency, and colour). Fields are separated by a blank.
SCPP-3758: Force idle state in web interface
SCPP-3763: Swedish language files updated
SCPP-3977: screen.bmp and alike should only be accessible in admin mode
PUI
SCPP-3843: Reintroduce menu option to configure fkeys using phone PUI
SCPP-3302: Scrolling of long display names
SCPP-3321: Allow all XML defined buttons to display a custom label - springboard icons may define color and positioning/size of the label
SCPP-3900: Phone Menu shows basic identity functionality in user mode (Menu - Identity)
NONE: New 370 splash images
SETTINGS
SCPP-3856: change obsolete setting values (e.g. F_R) on the fly, so customers don't need to fix their provisioning
SCPP-3162: Remove Identity - Remove also all Identity related settings
NONE: improve settings store log
XML BROWSER
SCPP-1492: Minibrowser: new XML tag for DTMF requested
NETWORK
SCPP-2862: IP address conflict check on DHCP an static IP
HEADSET
SCPP-2968: Act on USB Soundcard keyevents
SCPP-3842: Implementation of GN Netcom USB Headsets Specs
SCPP-3808: Implement headset usage with serial ehs box for 720/760
NONE: logs for serial headset commands
PROVISIONING
SCPP-3991: Option to have in redirect http-URLs again just filenames, instead of complete URLs
SCPP-3801: If the update policy is set to 'ask_for_update', a status message should be shown instead of terminating LCS and let LID ask the question
SCPP-2704: phone should not ignore HTTP 302 response instead make a new request to the provided location
NETWORK
SCPP-3990: IPv4 conflict detection should be VLAN aware
UC
SCPP-3786: Device Updates via Lync Update Service
SIP
NONE: New Log message for creation and deletion of a subscription

8.7.3.7 New Features

PUI
NONE: ADD - new setting mute_is_dnd_in_idle

8.7.3.6 New Features

CERTIFICATES
SCPP-3270: ADD - Entrust Root CA certificate

8.7.3.5 New Features

n/a

8.7.3.4 New Features

SIP
SCPP-2201: ADD - AOC Indication in 183 Response.

8.7.3.3 New Features

NETWORK
SCPP-2871: ADD - Advanced timeout handling in webclient. Added a new class which is handling 'back off timer' values.

8.7.3.2 New Features

SIP
SCPP-3241: ADD - Broadsoft - Several Content-Types/Events not supported. Feature added for call center call information. Minor improvement, remove tailing comma

8.7.3.1 New Features

PUI
SCPP-3030: Mute button in idle screen toggles DND (snom 300 only)
SCPP-2807: When the phone is rejected by the OCI server it needs to ask the user for the credential (user, password) using the PUI.
SCPP-2939: support for describing key-behaviour in XML for idle-navi-, idle-context- and hard-keys (menu and alike)
SCPP-2997: Broadsoft XSI-ACD Agent implementation
SCPP-3324: New setting requested to restore old speaker key behaviour: speaker_toggles_device
SCPP-726: OCS/Lync: Port for 370, 870, MP: Inform user about special routing events (fowarding, delegation, team call, acd, private line, cccp conferencing) during ongoing call
SCPP-3062: new setting controlling which canceled incoming rings don't make it into the missed-call-list: sip_cancel_reasons_to_ignore_missed_call
SCPP-3208: Added QSC Broadsoft ResourceList Keys
NONE: Saving new tbook entry out of call list details is taking name from contact pool if available
WUI
SCPP-2775: ADD - Add czech tone scheme to web UI drop down
XML
SCPP-3208: QSC Broadsoft ResourceList Keys - In XML-descriptions all applicable actions get fired now, not just the first one - accept though for dial-actions since phone can only dial one party at a time.
ACTION URL
SCPP-3157: new setting replace_header_fire_action_url if true action urls will be fired during transfer with replace headers.
CERTIFICATES
SCPP-3270: Entrust Root CA certificate added
DHCP
NONE: Fill DHCP option 12 (hostname) with 'snom_XXXXXX'.
SCPP-2773: Exchange Device Information via DHCP INFORM with the Gateway even if DHCP is not used for IP address allocation, two new settings: dhcp_options_on_ip_aquire and dhcp_options_on_inform
XML BROWSER
NONE: Minibrowser is now capable of handling elif and else tags.
PROVISIONING
SCPP-2808: Phone should always prefer redirection server over DHCP option 66/67. Added new setting provisioning_order which can change order of provisioning types
SIP
SCPP-3064: SIP MESSAGE can be used to send settings to the phone
AUDIO
SCPP-3122: Added setting headset_rings_once (in Advanced/Audio) to disable default repeated ringing for headsets.
URI
SCPP-3407: URi Utils should replace all occurrences of tokens in URIs.

8.7.2 New Features

CERTIFICATES
(8.7.2.9) SCPP-2971: ADD - Entrust Root CA certificate
AUDIO
(8.7.2.7) SCPP-2360: ADD - (snom720, snom760) Missing GSM Codec
(8.7.2.4) UPD - (snom720, snom760) Audio profiles have been improved.
UC
(8.7.2.5) SCPP-726: ADD - Microsoft OCS/Microsoft Lync: Inform user about special routing events (fowarding, delegation, team call, acd, private line, cccp conferencing) during ongoing call.
(8.7.2.5) SCPP-2438: ADD - Microsoft Lync: Inbound private lines.
(8.7.2.5) SCPP-2605: ADD - Microsoft Lync: Place g722 on top position of default codec list.
(8.7.2.0) SCPP-2411: ADD - Microsoft Lync - CFWD support with new publishing behavior.
(8.7.2.0) SCPP-2435: ADD - Microsoft Lync - Call admission control and bandwith management
(8.7.2.0) SCPP-2436: ADD - Microsoft Lync - Media Bypass
(8.7.2.0) SCPP-2437: ADD - Microsoft Lync - Monitoring and Device Inventory Reporting
(8.7.2.0) SCPP-2632: ADD - Microsoft Lync - E.911 - support of ms-subnet header in REGISTER and subnet info in roaming provisioning SUBCRIBE.
(8.7.2.0) SCPP-2634: ADD - Microsoft Lync - E.911 - disable of current Call Forwarding rules in Emergency Calls and revert automatically after 120 minutes.
(8.7.2.0) SCPP-2694: ADD - Microsoft Lync - Support for Set user presence.
PUI
(8.7.2.5) SCPP-3255: ADD - New setting keyboard_lock_accepted_callkeys to accept additional keys during keyboard lock.
(8.7.2.1) SCPP-1034: ADD - Show resolved names even in Call Lists.
(8.7.2.0) ADD - (snom300, snom320) Phone now uses joined-call-screen-techniques (SCPP-2590).
(8.7.2.0) SCPP-1781: ADD - Presence-buttons now work as transfer-target as well.
(8.7.2.0) SCPP-2566: ADD - Introducing new setting recording_mechanism to control what happens, when record key is pressed.
(8.7.2.0) SCPP-2590: ADD - (snom820,snom821) Softkeys in call-screen controlable via settings call_screen_fkeys_on_outgoing, call_screen_fkeys_on_incoming, call_screen_fkeys_on_connected and call_screen_fkeys_on_holding
(8.7.2.0) SCPP-2590: ADD - (snom820,snom821) Text format in line-info layer is now configurable, see new settings (provisioning only): lil_first_line_format, lil_second_line_format, lil_state_format, lil_1st_line_height and lil_2nd_line_height.
FKEY
(8.7.2.0) SCPP-2879: ADD - New option to distinguish dialing from call-pickup added to fkey XML subscribe specification.
(8.7.2.0) SCPP-2892: ADD - New option to add routing info added to fkey XML subscribe specification (subscription doesn’t need to use outbound-proxy from identity).
IP
(8.7.2.0) SCPP-2862: ADD - IPv4 conflict detection during bootup and defending during runtime (RFC 5227).
SETTINGS
(8.7.2.0) SCPP-2139: ADD - New setting disable_storing_changes to disable writing setting and local Directory changes to flash memory.
(8.7.2.0) SCPP-2720: ADD - New setting show_connected_call_in_monitor_view.
SIP
(8.7.2.0) SCPP-2922: ADD - Enable extension monitoring groups.
(8.7.2.0) SCPP-3072: ADD - New setting sip_stop_subscriptions_on_register_failure to stop subscriptions on registration failure.
(8.7.2.0) ADD - Sending DND on/off starcodes for server-managed DND as well.
WUI
(8.7.2.0) SCPP-3099: ADD - Make setting restrict_uri_queries configurable via WUI.

8.4.35 Features

no new features

8.4.34 Features

AUDIO
SCPP-3324: ADD - New setting requested to restore old speaker key behaviour: speaker_toggles_device

8.4.33 Features

ACTION URL
SCPP-3029: Do not trigger disconnect Action URL in case of rejecting a call anymore.
SIP
SCPP-3072: ADD - New setting sip_stop_subscriptions_on_register_failure to stop subscriptions on registration failure.
WUI
SCPP-3099: ADD - Make setting restrict_uri_queries configurable via WUI.

8.4.32 Features

CERTIFICATES
SCPP-2745: Added - Root CA of Start Commercial Ltd was added
PUI
SCPP-1911: Added - New setting for reciprocal hold. See reciprocal_hold
SCPP-1851: Added - User can now control when and how to switch message and call indication-leds. See Leds_Behavior
SCPP-2066: Added - Speaker-button acts like cancel when in a call and only speaker is active.
SCPP-2431: Added - Switching audio-devices for incoming and outgoing multicasts is possible now.
SCPP-2442: Added - (snom300, snom320, snom870): The setting show_ivr_digits can be used on the phones types now.
SCPP-2716: Added - The "forward to"-button goes to edit-number with pre-inserted number from settings when the transfer target ends with ";".
SCPP-2225: Added - (snom870) The speaker-touch-button now indicates whether speaker is on or not.
SCPP-2703: Added - Accept VGA-sized external images (color phones).
SCPP-2788: Added - Backlight settings were unified over all phone models.
SCPP-2406: Added - Forward all target is initialized with predefined or last entered number in edit screen.
SCPP-2675: Added - If billing informations are available show terminate screen for 3 sec.
LANGUAGE
SCPP-NONE: Added - New Czech translation
SCPP-NONE: Added - New Hebrew translation
UPDATE
SCPP-2516: Added - Disable frequent firmware checks by setting firmware_interval to 0
SIP
SCPP-2427: Added - DSCP value is used on all sip connections (udp, tcp, tls) and also for media (RTP, RTCP)
SCPP-2414: Added - SIP PUBLISH for number completion can be disabled. See use_proxy_number_guessing
SCPP-2797: Added - Registration can be delayed till time was received from NTP server. See user_wait_for_ntp_before_register

8.4.31 Features

No new features

8.4.30 Features

no new features

8.4.29 Features

no new features

8.4.28 Features

SIP
SCPP-2394: Added :Keep from sending too many ACKs to retransmitted 200OKs via new setting ack_repetition_idle_time;
SCPP-2394: Added :Send hold-reinvite AFTER having send ACK via new setting ack_before_reinvite_when_holding;

8.4.27 Features

SIP
Added: New setting to ignore sip-asserted-headers (don’t show): ignore_asserted_in_gui

8.4.26 Features

PUI
Added: (snom300, snom320) Added new setting always_refresh_both_lines : If enabled, always both (even unchanged) display lines are re-drawed. This may help when display content gets corrupted. (SCPP-2301)
Added: (snom300, snom320) Added new setting reset_display_on_idle : Time in minutes after which the phone resets the display hardware when in state idle. If greater 0, state change to state idle resets display hardware as well. (SCPP-2301)

8.4.24 Features

PUI
Added: (snom8xx) Led control out of minibrowser LED-tag is available now as well. (SCPP-2027)
Added: (snom300) New function key handling in minibrowser. (SCPP-2150)
Added: New identity setting conferencing is added which contains a sip-uri for a conference room. Used by pressing conference keys. (SCPP-1773)
HEADSET
Added: Wireless headset timing is now configurable via new setting headset_cmd_pause.
LLDP
Added: Accept also guest-voice, softphone-voice, vlan near voice and vlan network policy.
Added: Log Messages of Port ID Subtype and Port Description to have information about on which switchport the phone is plugged in (loglevel 6)!
Added: New setting lldp_asset_id, default value is phone type.
SIP
Added: A new setting sip_max_challenges is added to allow multiple challenges to a single phone request. (SCPP-2026)
TLS
Added: Certificate Authority Deutsche Telekom AG.
TR-69
Added: Two new parameters line status and line call state are added. (VOFO-95)
WEB
Added: Two new settings http_client_save_credentials and http_proxy_save_credentials are added to be able to save credentials after challenge request. (SCPP-1728)

8.4.23 Features

No features

8.4.22 Features

No features

8.4.21 Features

PUI
Added: New setting short_cancel_denies_call with the following meaning: true: short key press of cancel key will deny an incoming call; long press cancels the connected call. false: vice versa.

8.4.20 Features

No Features

8.4.19 Features

PUI
Added: (snom300, snom320) Enabled feature of opening local directory record of current call. (SCPP-1897)

8.4.18 Features

ACTION URL
Added new action URL variable $nr_ongoing_calls that always contains the number of active calls. (SCPP-1919)
AUDIO
Reduced speaker volume steps to 7 (SCPP-1896).
Added option to send silent RTP’s on mic mute to avoid connection loss problems in certain environments.
TR-69
Added support for X_000413_MethodNames. (SCPP-1824)

8.4.17 Features

NETWORK
Added support for LLDP-MED (Link Layer Discovery Protocol-Media Endpoint Discovery).
Added support for 802.1X with eap-md5.

8.4.16 Features

No new features

8.4.15 Features

AUDIO
Added new setting dtmf_volume for locally played DTMF tones. Can be used to improve inband DTMF and avoid DTMF echo (snomMP). (SCPP-1795)
DNS
Add new setting dns_cache_clear_timeout and timer.
XML BROWSER
Added callbacks in IF conditions. (SCPP-1798)

8.4.14 Features

AUDIO
Volume change should also change the speaker (handsfree) path (snomPA1, snomPA1DP).
BOOT
Boot process was optimized to save system memory (snomMP, snom870, snom821).
ETH
Switch port properties can be adjusted now. Switch port status is shown on WebUI info page (snom870, snom821). (SCPP-1070)
PUI
The big clock is no longer a snom-sign anymore, but it is now entirely made up of images and comes in two styles: analog and digital (snom870).
Login wizard for OCS version now inquires the three OCS specific login settings, instead of just account and registrar (SCPP-1631).

8.4.13 Features

PUI
New Action-URL setting for what URL’s to call when a certain subscription notify arrives (see http://wiki.snom.com/Settings/action_received_subscr_notify_url).
Number of speed key digits are limited to 3. No entries higher then 999 are possible.

8.4.12 Features

No new features

8.4.11 Features

LID
Added IEEE 802.1X eap-md5 authentication (new settings ieee8021x_eap_md5_username and ieee8021x_eap_md5_password).

8.4.10 Features

LID
Added mechanism for sending a stream of DTMF(s) on mapped key or WUI page (snom821, snom870).
XPATH
Enhanced Xpath implementation, i.e. max/min/last are supported now.

8.4.9 Features

TR-69
Allow to update/download the parameter map via the WUI.

8.4.8 Features

No new features

8.4.7 Features

No new features

8.4.6 Features

No new features

8.4.5 Features

No new features

8.4.4 Features

IOPINs
Added mechanism and required settings for automatic turning off of pins based on timers (snomPA1,snomPA1DP).
TLS
Added Server Authentication.

8.4.3 Features

FKEY
XML definition allows to define a default-state that gets applied when a key is set up initially, see here.
XML definition now allows to define action-urls to be called on key-event, see here.
PUI
All springboard icons can now be repositioned or removed using settings idle_icon_01..15 (snom870).
Springboard can show free programmable function keys now (configured by XML-definitions in XML section <functionKeys>)(snom870).
Setting snom_clock_style set to <analog> by default (snom870).
The settings dkey_fkey1-4 are available now. They can be set like other pre-programmed function key settings, for example to "speed 1234". If they are set, they are fired instead of the original softkeys configured in the settings gui_fkey. (SCPP-1564)
KEYS
Keymapping may now be changed via settings in case a customer wants to reorder the plastic keys of our phones.
SETTINGS
Setting values like "!$(user_name)@$(user_host)" will be evaluated and replaced with the result of their setting values respectively. (SCPP-1534)
TR-69
Added new RPC Method: X_Snom_GetWebContent.
UPLOAD
Customization archives are reloaded after firmware update (snom370-VPN, snom820, snom870).

8.4.2 Features

FKEY
XML definition now allows to define a different dial target depending on the fkey-state, see action.
Added new setting show_clock, which removes date and time from idle screen, if disabled. (SCPP-1263)
Letter input via numpad now depends on selected language (defines which special characters to use) but may be overwritten by values of new settings chars_in_…case_on_0..9. (SCPP-528)
SIP
Added AOC via XML: aoc-d and aoc-e supported. (SCPP-1415)

8.4.1 Features

AUDIO
Added starting of Multicast Paging without PBX. Can be selected per fkey at the fkey webUI page. (SCPP-208)
Fixed audio reception when using OCS conferencing. (snom820)
Fixed casing speaker click sound whenever it was turned on. No more click (snom870). (SCPP-1376)
Allow to mute the ringing of an incoming call with the mute key or a mute function key. (SCPP-937)
DIALPLAN
Added identity parameter to the dialplan XML which allows to route numbers to a particular identity no matter which identity is currently selected. (SCPP-195, SCPP-1244)
DIRECTORY
Added multi-numbered directory entries and favorites directory (snom360, snom370, snom820), just like snom870. But snom360 and snom370 don’t store photos though.
Master-entries in internal directory may now define a nick-name.
Added new attribute number-type.
Provisioned tbooks entries now replace old records by the same index. If you don’t want this, do not provision an index. (SCPP-940)
Provisioned tbooks may now entirely replace current tbook (instead of just adding to it), just set attribute "complete" of the tbook-tree to "true". (SCPP-940)
DTMF
Speed dial now accepts a DTMF sequence that is played once the call has been established. (part of SCPP-194)
Pressing a speed dial function key with argument "number=incomplete" shows the number on the display for further editing rather then dialing it. (part of SCPP-194)
PUI
Added umlaut support. Can be used for better LDAP-search requests, but umlauts may now be used anywhere where you can enter a text (snom360, snom370, snom820, snom870, snomMP).
XML idle screen on snom370 can now define the statusbar position just like snom360 and snom820.
Now displaying used codec and SRTP (for secure connections) when one presses the message button during a call (snom820). (SCPP-300)
Now displaying codec used and SRTP (for secure connections) in party-details (snomMP). (SCPP-300)
Codec info on ?-key is now integrated into the GUI instead of destroying its design (snom370). (SCPP-300)
Added 5 party conference (snom820). (SCPP-852)
Increased usability of touch-interface by not mistaking slightly differing touch vs. release coordinates for Drag’nDrop. Assuming Press at initial coordinates instead (snom870).
Increased speed when rendering idle XML’s with lots of clock-images (snom820, snom870).
Password challenge will disappear automatically when identity registers successfully (eg. if password was provided via webUI). (SCPP-1339)
Saving (to restore after a reboot) the latest 5 call records of each: missed, received and dialed.
Setting menu is now defined by an XML file and processed by minibrowser. (SCPP-1293)
Two action-urls can be configured, for press and release of the key, respectively. (SCPP-1122)
Via the new setting user_admin_mode, you can hide users privacy (call lists, directory) from the administrator. (SCPP-1326)
Added setting ignore_missed_calls_on_busy that inhibits the phone to add an incoming call to the missed calls if the user is in dialing state and denies an incoming call.
Added setting to enable the ringtone while other calls are on hold. (SCPP-201)
Allow to edit numbers from the call histories before calling them. (SCPP-921)
Added new way of provisioning fkeys to represent subscribtion-notifies (see wiki?fkey).
LID
Added pin control functionality for the door phone through OB DTMF. Also added light blinking on voice activity for the door phone (snomPA1-DP).
NET
Added new setting ignore_dhcp_findings allowing to ignore certain DHCP findings. (SCPP-1179)
PROVISIONING
Cut provisioning retry counter from 20 down to 1.
SETTINGS
Activate reading of presence states from XML file. (SCPP-1078)
New upload types gui_xml_state_conference, gui_xml_state_details, gui_xml_state_holding, gui_xml_state_settings, gui_xml_addperson added to be able to provision XML-GUI files.
Removed global ringer setting ring_sound which is redundant and confusing as the ringer is taken from the line dependent setting user_ringer. (SCPP-1318)
SIP
Added support for NTLM V2 authentication, new setting use_NTLMv2 can be used to disable NTLM V2 authentication, but is enabled by default.
New setting suppress_sip_messages suppresses processing of SIP MESSAGE but replies with 200 OK if enabled.
UTILS
Increased speed on reading XML-files.
WEB
If set, use the hostname of the phone as the title for the web user interface pages. (SCPP-1366)
Added new action URL which is triggered when a phone receives an attended transfer. (SCPP-1037)
Added timezone for United Arab Emirates (Dubai). (SCPP-353)
Allowed to enter the new XML-describtion of fkeys via web interface as well.
Values in drop-down combo-boxes for fkey-types and key-events are now sorted alphabetically as well.
Left menu in the snom web UI is now configurable. Just put a comma separated list in two new settings leftnav_hidden_user and leftnav_hidden_admin for user and admin mode respectively.

8.3.7 Features

No new features

8.3.6 Features

No new features

8.3.5 Features

No new features

8.3.4 Features

No new features

8.3.3 Features

  • Added support for OCS-presence-only (no voice) identities (Broadsoft/OCS integration) (new settings: user_presence_identity, user_presence_only, user_default_contact_uri).
  • User may now enter special characters via number-pad: äáâàçëéêèïíîìöóôòñßüúûù - just press repeatedly the key associated with the base-letter (eg. 1-abc for ä, á, â, à and ç), you must of cause be in mode abc or ABC (SCPP-528).
  • One can now configure what label to put onto the virtual keys.
  • Discard XML-idle-screen on pressing cancel key (whiping display still also yields same result). (SCPP-1084)
  • Discard call monitoring screen on cancel key. (SCPP-941)
  • Fixed duplicate pickup information in call pickup screen. (SCPP-1102)
  • Go offhook with wireless headset will dial number out of internal or LDAP directory. (SCPP-1072)
  • LDAP lookup when dialing a number now starts only when the typed in number has as many digits as defined with setting guess_start_length.
  • Menu entries are now hideable with a comma separated list in new settings menu_hidden_user and menu_hidden_admin.
  • Enabled EHS support.
  • Added call agent ACD state synchronization. (SCPP-854)
  • Internal directory can now be synchronized with certain XCAP servers. (SCPP-1047)
  • Master entries in internal directory may now define a nick name.
  • Left menu in the WUI is now configurable. Just put a comma separated list in two new settings leftnav_hidden_user and leftnav_hidden_admin for user and admin mode respectively.
  • Added runtime variable $phone_ip to be used with the webclient like triggering action URLs etc.
  • Showing bootloader version at system info page.
  • Fixed WEP mode.

8.2.35

FKEY
XML-definition now allows to define a default-state that gets applied when a key is set up initially, see here.
XML-definition now allows to define action-urls to be called on key-event, see here.
KEYS
Key mapping may now be changed via settings, when a customer wants to reorder the plastic key caps of the phones.
TLS
Added Server Authentication.
TR-69
Added new RPC Method: X_Snom_GetWebContent.
UPLOAD
To trigger reloading of customization archives, clearing now settings 'upload_gui' and 'upload_web' after successful update.

8.3.34 Features

No new features

8.2.33 Features

No new features

8.2.32 Features

No new features

8.2.31 Features

No new features

8.2.30 Features

No new features

8.2.29 Features

No new features

8.2.28 Features

No new features

8.2.27 Features

No new features

8.2.26 Features

No new features

8.2.25 features

FKEY
XML definition now allows to define a different dial target depending on the fkey-state, see this article.
PUI
Added new setting show_clock, which removes date and time from idle screen, if disabled. (SCPP-1263)
Timezone setup wizard now starts out with reduced list of timezones that match the choosen language (snom360, snom820, snomMP).
Letter input via numpad now depends on selected language (defines which special characters to use) but may be overwritten by values of new settings chars_in_…case_on_0..9. (SCPP-528)
Password challenge will disappear automatically when identity registers successfully (eg. if password was provided via WUI). (SCPP-1339)
WUI
If set, use the hostname of the phone as the title for the web user interface pages. (SCPP-1366)
Added new action URL which is triggered when a phone receives an attended transfer. (SCPP-1037)
XCAP
Synchronization now ignores obvious dummy SIP numbers. (SCPP-1388)

8.2.24 Features

  • Now displaying used codec and SRTP (for secure connections) when one presses the message button during a call (snom820). (SCPP-300)
  • Now displaying codec used and SRTP (for secure connections) in party-details (snomMP). (SCPP-300)
  • Codec info on ? key is now integrated into the GUI instead of destroying its design (snom370). (SCPP-300)

8.2.23 Features

  • Allow to mute the ringing of an incoming call with the mute key or a mute function key. (SCPP-937)
  • Via the setting user_admin_mode, you can hide users privacy (call lists, directory) from the administrator. (SCPP-1326)
  • Added setting ignore_missed_calls_on_busy that inhibits the phone to add an incoming call to the missed calls if the user is in dialing state and denies an incoming call.
  • Allow to edit numbers from the call histories before calling them. (SCPP-921)

8.2.22 Features

  • Subscribtions may now define a for and a to attribute. for sets the R-URI, to is for the to-field in the sip-message.
  • Increased speed when rendering idle XML’s with lots of clock-images (snom820).
  • New setting suppress_sip_messages suppresses processing of SIP MESSAGE but replies with 200 OK if enabled.
  • Added new number type attribute.
  • Increased speed when reading XML files.
  • Allowing to enter new XML description of fkeys via web UI as well.
  • Values in dropdown comboboxes for fkey-types and key-events are sorted now alphabetically.

8.2.21 Features

  • Added identity parameter to the dialplan xml which allows to route numbers to a particular identity no matter which identity is currently selcted. (SCPP-195, SCPP-1244)
  • Line LEDS can now change color according to the color-attribute received for those keys defined as buttons (snom820). (SCPP-804)
  • Virtual key state and side screen now use received labels for those keys defined as buttons (snom820). (SCPP-804)
  • Decreased provisioning retry counter from 20 down to 1.
  • Added new setting use_NTLMv2 to disable NTLM V2 authentication which is enabled by default.

8.2.20 Features

  • Pressing a speed dial function key with argument number=incomplete shows the number on the display for further editing rather then dialing it. (SCPP-194)
  • Speed dial now accepts a DTMF sequence that is played once the call has been established. (SCPP-194)
  • A provisioned directory may now entirely replace the current directory instead of just adding to it. Just set attribute complete of the directory-tree to true. (SCPP-940)
  • Provisioned directory entries may now replace old records with the same index. If you don’t want this, don’t provision an index. (SCPP-940)

8.2.19 Features

  • Added new way of provisioning fkeys to represent subscribtion-notifies (see wiki→fkey).
  • Added new setting ignore_dhcp_findings allowing to ignore certain DHCP options provided by DHCP server. (SCPP-1179)

8.2.18 Features

  • Added timezone for United Arab Emirates (Dubai). (SCPP-353)
  • Calculate round trip delay (in ms) to be used in reporting stats.
  • Enhanced VQ-Report.
  • Added support for NTLM V2 authentication.

8.2.17 Features

  • Save (to restore after a reboot) the latest 5 call records of missed, received and dialed call list, respectively.
  • Two action URLs can be configured, for pressing and releasing a key, respectively. (SCPP-1122)
  • Added new setting suppress_ringing_during_hold to enable the ringtone while other calls are on hold. (SCPP-201)
  • Add optional Outbound support. (SCPP-1079)

8.2.16 Features

  • Phones with grafical display may now enter special characters via numpad (snom360, snom370, snom820, snomMP): äáâàçëéêèïíîìöóôòñßüúûù - in edit mode "abc" or "ABC" just press repeatedly the key associated with the base-letter (eg. "1-abc" for ä, á, â, à and ç). (SCPP-528)
  • XML idle screen can now define the statusbar position even for snom370 (just like 360 and 820).
  • OCS: Added support for OCS-presence-only (no voice) identities (Broadsoft/OCS integration) (new settings: user_presence_identity, user_presence_only, user_default_contact_uri).
  • Discard "call monitoring" screen on Cancel key. (SCPP-941)
  • Menu entries are now hideable. Just put a comma separated list in two new settings menu_hidden_user and menu_hidden_admin for user and admin mode respectively.
  • Internal directory can now be synchronized with certain xcap-servers. (SCPP-1047)
  • Master entries in internal directory may now define a nick-name.
  • Left menu in the snom web UI is now configurable. Just put a comma separated list in two new settings leftnav_hidden_user and leftnav_hidden_admin for user and admin mode respectively.
  • Added runtime variable $phone_ip to be used with the webclient like triggering action URLs etc.

8.2.11 Features

No new features

8.2.10 Features

  • Call Agent ACD State Synchronization (SCPP-854)

8.2.9 Features

  • LDAP lookup when dialing a number now starts only when the typed in number has as many digits as defined with setting guess_start_length.
  • 820 now opens virtual key state automatically on activity, setting allowing that is on by default.

8.2.8 Features

8.2.7 Features

  • Added support for version 6 audio coefficients (snom3xx). Selecting the new room type "v6" leads to same volume behaviour as in version 6 releaeses. (SCPP-889)
  • Added support for options 132 vlan_id (802.1q) and 133 vlan_qos (802.1p). They can even be tunneled via option 43. (SCPP-859)
  • Added OCS support for presence key. (SCPP-641)
  • Minibrowser can now be invoked using HTTP. (SCPP-238)
  • Minibrowser pages can now trigger LEDs. (SCPP-240)
  • Text prediction based search on LDAP directory. (SCPP-409)
  • Transfer on onhook is now available for blind transfer, too. (SCPP-810)
  • Added additional STUN requests (RTPv0) in the beginning of a call for server type Teles. (SCPP-671)
  • Added OID to show CPU load average of last 1min., 5min. and 15min.
  • Added OID to show used, free, cached, lid (phone lowlevel app.) and lcs (phone highlevel app.) memory usage.
  • Added OID to show application uptime.
  • Added OID to show the number of incoming and outgoing messages.
  • Added OID to show the number of open connections.
  • Added OID to show the number of timeouts running.
  • Added OID to show the number of active subscriptions.
  • OCS: The User-Agent header now includes information whether the software type is OCS or not.
  • Added intermediate certificate phone2 that signs the phone certificate. The SSL certificate message encapsulates both certificates.
  • Added support of keys up to 4096 bits in size (client and server side).
  • One can upload and replace files in bmp (snom370-VPN, snom820) and html (snom370-VPN, snom820, snomMP) directories. (SCPP-873)
  • Removed second pair of HTTP user/pwd credentials for standard user. adminmode/admin_mode_pass is enough.(SCPP-679)

8.2.6 Features

No new features

8.2.5 Features

No new features

8.2.4 Features

  • LDAP result sets are sorted now. (SCPP-747)
  • VQM reporting is no longer restricted to MetaSwitch server type anymore.
  • To reduce memory wasting for SIP trace and system log we added a new setting sip_tracing to be able to switch off SIP tracing at all as well as the new loglevel -1 to switch off logging. (SCPP-779)

8.2.3 Features

  • Added Hungarian language support.
  • Enbabled EHS support (snom300). (SCPP-612)

8.2.3 Features

  • Added Hungarian language support.
  • Enbabled EHS support (snom300). (SCPP-612)

8.2.2 Features

  • Securing communiction with random message id. New CSTA messages for set and get settings, xml push and firewall test. (SCPP-648)
  • Added option for very fast LED blink rate on ringing (new setting blink_very_fast).
  • Added keyboard lock after timeout (new setting keyboard_lock_timeout). (SCPP-676)
  • Enhanced language support for Portugues and Hebrew.
  • Added language support for Estonian and Hungarian.
  • On challenged web client requests, user gets asked for username and password at the display. This may be used to login a phone user. (SCPP-699)
  • Phone can now upload files into tmpfs and replay them as MOH. (SCPP-696)
  • Parameters like "$ip_addr" as part of the URL stored in for example setting_server are replaced with it's values before the URL is used for provisioning requests. This is the same syntax like for the Action URLs. (SCPP-698)
  • Show login page after logout. (SCPP-678)

8.2.1 Features

  • Enlarged adressbook with entries for first and family name, email, company, birthday, etc. (snom820 and snomMP). (SCPP-522)
  • Hebrew and Cyrillic character editing support.
  • Call can be started out of call lists with wireless headset as well now. (SCPP-351)
  • VQM reporting over SIP, according to draft-ietf-sipping-rtcp-summary using SIP PUBLISH.
  • Added new setting prioritise_pbx_number_lookup to ignore PBX transmitted user name for incoming calls in order to enable correct lookup in internal LDAP address book. (SCPP-131)
  • Added support for RTP listening on multiple multicast sockets.
  • Added new setting empty_tls_client_cert to use empty client certificate in TLS connections. For OCS the setting defaults to on, otherwise to off. (SCPP-597)

8.1.3 Features

  • Call Pick-up: if the first character in the string following the "|" is a "!" the rest is dialed out unaltered
  • Added support for new check-sync option: check-sync;reboot=reregister-only

8.1.2 Features

  • Added new action release to clear previously seized button line.
  • Handle header "Remote-Party-ID" for Cisco Call Manager (CCM). (SCPP-412)
  • New setting user_additional_supported_header for "additional supported headers". (SCPP-413)
  • Added key_dtmf to initiate key events with DTMF tones remotely via http://phoneIP/command.htm?key_dtmf=KEYEVENT. (SCPP-94)
  • PC port can be disabled via new eth_pc option off.

8.1.1 Features

No new features

8.0.13 Features

No new features

8.0.12 Features

  • Complete system-info is now in settings (Phone_GUI). The Help-key on the phone ("?") now shows the support message on the display.

8.0.11 Features

  • redirection with function key type BLF
  • split timezone -10:USA into -10:USA(Hawaii) and 2-10:USA(Aleutian Islands) due to different DSTs
  • a logging entry is created if an Action URL could not be accessed
  • Device Feature Key Synchronization Broadsoft
  • Broadsoft directory access via OCI-P
Bugfix

8.7.3.25 Bugfixes

AUDIO
SCPP-5115: Ringtone disappears in certain situations
SCPP-5105: Phone input via keypad, handset or line key sometimes is blocked for incoming calls
SCPP-4984: Call Deflection - Dialtone is played out when deflecting a call
SCPP-5176: After SSRC change no audio for few seconds
SIP
SCPP-5147: No DTMF outband events are send using the snom conference server
SCPP-4906: disabled m= lines in SDP offer must also appear in SDP answer
PUI
SCPP-5142: Local address book matching does not work any longer for direct IP calls
SCPP-5104: Changes to user_ringer parameter via phone menu not being saved
SCPP-5159: phone doesn't show LDAP lookup result on incoming call (snom 370/870 only)
HEADSET
SCPP-5097: Endless toggling between Headset and Speaker on Plantronics Wireless SAVI W745/A
UPDATE
SCPP-4809: When firmware update fails the phone does not restart automatically (snom 300 only)
WUI
SCPP-5043: Replacement of Action URL Variables adds "equal" sign on query parameter without value

8.7.3.23 Bugfixes

NETWORK
SCPP-5074: phone forgets VLAN setting if downgrade to firmware version with old VLAN setting format
SCPP-5055: LLDP - device adverts only Half Duplex if AutoNegotation not enabled (Operational MAU Type)
SCPP-4882: VLAN - Prio not working if TOS is set up
SCPP-2254: TOS Out-Of-Range and no Reboot indication
PUI
SCPP-5071: BLF/Call Pickup: Wrong LED Behaviour (Ringing, BLF Key instead Line Key)
AUDIO
SCPP-5081: missing audio at the beginning of IVR announces (circa one second)
SCPP-5064: Sometimes 821/870 phones are playing disturbing noise on speaker in idle state
SCPP-5017: enabled auto_dial causes constant signaling of busy tone.
HEADSET
SCPP-5090: No Audio on Outgoing Calls with Wireless Jabra and Plantronics headsets on snom 7xx
SCPP-5065: snom 760 crashes with Plantronics headsets Wireless SAVI W745/A and Wireless CS540A
SIP
SCPP-5053: phone duplicates not supported media type (video) on Re-Invite (Session Timeout)
SCPP-5029: Incorrect REFER causes server based conference to fail with 3CX
SCPP-4902: Invite responded too incorrectly before the ack of 180 ringing that included 100rel
SCPP-4995: Incorrect response to identity-request with blank credentials
PROVISIONING
SCPP-5070: Provisioning sometimes does not work when the network uses STP and static IPs for the phones
SCPP-5042: Parammap for all phone types needs to be updated

8.7.3.22 Bugfixes

NETWORK
SCPP-4859: snom 710 doesn't forward EAP packets to the PC port
SCPP-4811: Enabling Wifi Ethernet Bridge leads to phone being stuck in sending DHCP requests
SCPP-4808: PA1 identifies itself as Snom300 (Vendor Class Identifier)
SCPP-4804: Lease renewal, phone does not reboot if NACK from server
SCPP-4517: phone loses packets during internal switch reset
SCPP-3476: %23(encoding for #) in csta:calledDirectoryNumber is ignored in outgoing SIP-INVITE if csta_legacy_control = 0
PUI
SCPP-4987: Call Deflection - Current Call is put on HOLD instead of 2-way-audio while deflecting the other call
SCPP-4881: dkey_fkey doesn't work for URL action
SCPP-4878: BLF Call Pickup - Group Call Pickup via Call Monitor does not work
SCPP-2026: Expansion Module/BLF makes phone delay or become unresponsive or slow
SCPP-4877: Conference with 4 participants leads to crash
SCPP-4950: Conference soft key should not auto hide when conferencing setting is not empty
SCPP-4964: Several actions are always applied to connected call instead of waiting call even if waiting call is selected in joined call screen
SCPP-4592: Displayed wrong Caller ID number after a remote party update during an active dialogue
SCPP-4605: Unable to initiate attended transfer if multiple identities are involved
SCPP-4710: snom320: LCD Display freeze after provisioning failed (via timeout)
SCPP-4640: speed dial keys should use the fail over identity when the context is configured as active identity
SCPP-4132: Hebrew text on line info layer displayed backwards
SCPP-4575: goto_monitor_state_on_line_activity not working as expected in ring group scenario
SCPP-4739: scroll bar does not highlight the selected ring tone in phone menu
SCPP-4751: Status Info screen will not be displayed if key is overwritten with dkey_fkey4
SCPP-4555: Pressing the speaker key (short press) changes mode from Headset to None every two times, must do it every time
SCPP-4762: editing internal directory entries via PUI not possible
SCPP-4764: Unkown is shown instead of caller ID on incoming call after hold
SCPP-4783: Edit number before call feature is broken
SCPP-4794: Really slow responsiveness of the phone after having done several calls
SCPP-4840: Cannot open details of missed call in Status Information by pressing OK
SCPP-4829: phones freeze in edit mode during press of CANCEL
SCPP-5019: Broadsoft/AOC - phone shows AOC Screen after call even when not activated
SCPP-4728: Dialling out of detail view in caller lists not working
WUI
SCPP-4875: Switching account details for an Identity that first didn't have an outbound proxy to one that does will fail to send the de-register to the right IP address
SCPP-4980: Export and Import of CSV address book is broken
SCPP-4656: display_method = display_number_name has no effect on caller lists on the Web interface
SCPP-4641: Spelling mistake in download parameter mapping in WUI
SCPP-4631: Line-Info Layer More Controls are changed when behaviour settings are changed
SCPP-4552: @IP for "Extension Monitoring Call Pickup List URI" is not added automatically in the SUBSCRIBE packet as it was in the past
SCPP-4734: P-Asserted-Identify information are not being removed from contact.htm
SCPP-4742: user mode not applied after change from admin to user and cold restart of the phone
SCPP-4569: changing the <dkey_settings> is not possible, other dkeys_x work correctly, also key_settings_remapped=none doesn't have an effect
SCPP-4572: Spamming message in log: PHN: SIP: packet 1037204 dest invalid udp:10.123.248.66:5060 for Request DISCOVER/-
SCPP-4606: 7xx-series does not support 60ms packets but settings is present
AUDIO
SCPP-4984: Call Deflection - Dial tone is played out when deflecting a call
SCPP-4920: MWI Indication beeps strange in idle
SCPP-4813: snom 710: The first DTMF tone is missing during hold when using speaker
SCPP-4724: One way audio with g729 codec after selecting one conference participant, pressing OK and then resuming the conference
SCPP-4711: Muted connected call gets unmuted when another incoming call stops ringing
SCPP-4653: If DTMF keys are pressed very fast in a call, the remote phone sometimes didn't recognize the outband DTMF events correct
SCPP-4628: during number entry phone plays DTMF tones sporadically
SCPP-4619: phone stops receiving multicast after receiving an incoming call via handset
SCPP-4610: Multicast paging receive delays audio ca. 3 seconds when changing audio device
SCPP-2089: DTMF - SIP only activated, RTP event still being sent (snom 821/870 only)
SCPP-3863: Incoming Call while automatic redial on busy results in ringing tone restart every second
SCPP-3531: Broadsoft/Call Center/Hold Reminder - Speaker is not Ringer Device for second incoming call
SCPP-4910: G729ab is not working on 3xx, 820, 710
HEADSET
SCPP-4966: mix mute on 720/760 doesn't work properly with USB Plantronics Blackwire C620
SCPP-4962: Ringtone (short beeps) for incoming call cannot be heard on Wireless Jabra PRO 920, EMEA
SCPP-4958: Wireless Jabra PRO 9470 can accept incoming calls only by pressing the headset button twice
SCPP-4688: Wireless headset Wireless Jabra PRO 920, EMEA doesn't work properly
SCPP-4586: DHSG mode at GN9330 results in delayed audio connection to opposite
SCPP-4181: Wireless headset doesn't work properly, audio is played via handset instead of headset and call is disconnected just press the headset button twice
SIP
SCPP-4947: RTP - SSRC / Sequence Number not correct
SCPP-4893: Hold fails because of different DTMF paylod types 101<->96
SCPP-4712: phone sends 711u codec on blind transfer to IMS mobile
SCPP-4622: Typo in RTP Payload Format for AMR Wideband codec. Hyphen was missing, it shows "amrwb" instead of "amr-wb" as specified in RFC3267
SCPP-4944: phone does not send INVITE with authentication after Failover
SCPP-4873: 302 Moved Temporarily during call
SCPP-4931: "Unauthorized" for REFER will not be resend if user_moh is used
SCPP-4961: Regex dialplan affects also SUBSCRIBE URI
SCPP-4596: although user_active is disabled the phone still sends REGISTER to the registrar until performing a reboot
SCPP-4705: P-Asserted-Identity number part isn't recorded in call history
SCPP-4732: OpenSips - phone does not register due to ignored expires header, gruu
SCPP-4740: Phone does not reboot when a uaCSTA session is the only active call
SCPP-4758: Astimax - phone loses Registration
SCPP-4779: Park+Orbit is broken
SCPP-4815: PUBLISH contains a body in refresh requests
SCPP-4836: Wrong dst port is used for voice mail if the registrar is not using the default port 5060
SCPP-4848: DTMF SIP INFO not working in early-media state
SCPP-4865: Park Service is shown as Connected Number for forked calls with the same number
SCPP-4902: INVITE responded too incorrectly before the ACK of 180 ringing that included 100rel
SCPP-4926: Phone looses presence subscription after receiving any response code 4xx without expires or expires 0
SCPP-4968: Show message This call may take longer to complete. Network may be busy only if inside 199 the ms-diagnostics is set to 5 (Insufficient bandwidth to establish session)
SCPP-4683: Broadsoft - BLF does not work any more with default function key settings
SCPP-3839: Broadsoft - phone shows HOLD state even when HOLD Request was rejected / Unhold not possible
SCPP-4812: g729 codec choice incorrectly includes annexb=no in SDP
SCPP-3791: presence doesn't work after the SIP proxy is down
SCPP-3840: Broadsoft/Timer Support - phone adds required header even when not necessary / not advised
LANGUAGE
SCPP-4562: Wrong value changed for Slovenien Language, casing provisioning of the language not working anymore
XML BROWSER
SCPP-4802: SnomIPPhoneDirectory: the last entry item is highlighted instead of the first one
SCPP-4731: Replacement of {index} in action URLs not working any longer
LDAP
SCPP-4918: LDAP result doesn't show No data available when no result is found
SCPP-4715: LDAP number attributes are not applicable for ldap_display_name
PROVISIONING
SCPP-4334: If SIP password is changed via provisioning it seems not to get active
SCPP-4612: TR-069 replacing more than one dynamic parameter does not work

8.7.3.19 Bugfixes

AUDIO
SCPP-4544: no ringing on speaker when a 2nd incoming call is waiting and the 1st call is terminated by going on-hook
SCPP-4514: alphanumeric characters not sent in DTMF keys
SCPP-4512: Pickup indication with function key configured as extension does not work
SCPP-4485: Phone stops sending RTP and MediaDeamon crash is causing the phone to reboot
SCPP-4477: No Audio can be heard when receiving Intercom/Push2talk calls and Type of Intercom Answering is set to "Handsfree" (snom PA1 only)
SCPP-4564: Crash with Teles after < 100 simple calls
SCPP-4431: Inband DTMF for FLASH doesn't work on 7xx Series
SCPP-4415: no audio in a 4-part conference after selecting the first participant and pressing OK (snom 710 only)
SCPP-4364: snom MP crashes when answering the call
SCPP-4345: Dialtone during hold is missing after answering an incoming call from handset
SCPP-4340: DTMF tones not being sent while showing a minibrowser image on the phone display (i.e. images from a Baudisch camera)
SCPP-4335: Starcode-INVITE mistakenly establishes call with audio
SCPP-4281: One-way audio for T-com users because of double codec in SIP header
SCPP-3740: The first DTMF tone on a snom 821 using tone schemes like USA, UK, AUS is missing when the phone is in idle and the speaker is used (handset is not used)
SCPP-3735: phone doesn't play ring tone after a conference call (snom 820 only)
SCPP-3307: Transferring the same phone two times results in one-way b-channel with Teles
SCPP-2830: Multicast Paging: Can't switch between speaker/handset during an active multicast on the destination site
SCPP-1857: audio delay with outgoing calls affecting 821 and 870
SCPP-4342: Phone doesn't ring when receiving second incoming call and auto_redial is enabled
SCPP-3382: Multicast paging not working when assigned to soft key
SCPP-3760: Phone (member of ring group) remains ringing even when another phone picks up the call
SCPP-4598: Phone looses memory when changing volume
SCPP-4591: One way audio after selecting one conference participant and pressing OK in a 4/5-part conference (snom 720/760 only)
SCPP-4306: Audio: Bluetooth Headset on snom 7xx doesn't work properly
SCPP-4181: Audio: Wireless headset doesn't work properly, audio is played via handset instead of headset and call is disconnected just press the headset button twice
SIP
SCPP-4579: After many transfers to the same number, each with different unique "Refer-To:" URI, the phone becomes slow
SCPP-4524: snomMP happen to show 'SIP disabled' after SW-update
SCPP-4508: Exention monitoring not working after transfer due to REFER being sent to C instead of A
SCPP-4503: ACD user interface corrections
SCPP-4499: Click To Call failed
SCPP-4498: In header "WWW-Contact" include not a valid URL of the phone
SCPP-4492: setting conferencing doesn't work for phones using joined call-screen
SCPP-4438: When contact URI is set to anonymous@anonymous.invalid the phone does not show the display name on incoming calls (instead "unknown" is displayed)
SCPP-4434: QSC: BargeIn/Notify freeze and ignored CANCEL request
SCPP-4427: filter_registrar can by bypassed with IP call and remote control via CSTA is possible.
SCPP-4425: Action URL will be executed even if the call has been answerd somewhere else
SCPP-4417: on rejection of SIP hold request the call cannot be retrieved/hold/released any more
SCPP-4414: SDP state sendonly/recvonly toggles back to sendrecv on incoming INVITE without SDP
SCPP-4024: Phone sends "486 Busy" after "302 Moved"
SCPP-3731: phone doesn't change the Caller-ID after transfer (from-change --> RFC 4916)
SCPP-4539: Basic Call is immediately put on HOLD when the call is accepted
SCPP-4552: @IP for "Extension Monitoring Call Pickup List URI" is not added automatically in the SUBSCRIBE packet as it was in the past
PROVISIONING
SCPP-4551: Wrong file name requested when using provisioning with DHCP option 67 (snom[XXX].xml-[MAC] instead of snom[XXX]-[MAC].xml)
SCPP-4521: dialplan change via TR69 must be applied without reboot
SCPP-4494: Uploading license file doesn't work in case of a setting change reboot
SCPP-4420: provisioning of codec_priority_list not working correctly when permission flag is set
SCPP-4237: TR69 param_map cannot be loaded when auto_reboot_on_setting_change is enabled and phone has reboot=true setting
SCPP-3858: provisioning of phone GUI customization can cause the phone to stuck in reboot loop
PUI
SCPP-4509: Backlight turns on unexpectedly
SCPP-4500: goto_monitor_state_on_line_activity and goto_virtual_keys_state_on_activity disturbing number input
SCPP-4456: Park+Orbit softkey appears when handset is used (snom 370 only)
SCPP-4451: setting mailbox_active not working
SCPP-4435: display_method has no effect on caller lists
SCPP-4432: XML Idle Screen incompletely or incorrectly loaded on reboot
SCPP-4430: Idle state can't be reached by pressing cancel after unplugging ethernet cable in "Help" state
SCPP-4426: PUI Timezone, Language, Tone Scheme: pressing the "Cancel" key may not function properly
SCPP-4423: No Virtual keys button on transfer screen
SCPP-4354: Caller Picture: snom 760 shows dialed calls as unknown but also with the correct call ID
SCPP-3916: Call LED keeps flashing and the number of missed calls stays in idle screen all the time
SCPP-2966: Park+Orbit key is not glowing/no signal if there is call in orbit
SCPP-4418: Call Deflection: not reaction of push the key Transfer in the state Ringing
SCPP-4412: edit_alpha_mode has no effect on the password in the Logon wizzard
SCPP-4599: cannot enter menus or sub menus after address book resolution of caller
SCPP-4573: Transfer of picked up call not working using key type extension and transfer destination = monitored extension
NETWORK
SCPP-4450: DHCP - 5 years DHCP lease is not accepted and the end result is snom sends a lot of requests.
SCPP-2674: After upgrade VLAN settings get lost (7.3.30 to 8.7.3.15)
SCPP-3798: Retransmitted NOTIFYs are leading to state update of BLF keys
SCPP-4577: Phone resets the TIME-stamp to 0, but don't set the MARKER-bit
LDAP
SCPP-4541: LDAP: After multiple queries phone does not send searchRequests anymore
SCPP-4530: If country and area codes are set and 0 is called, the phone looks up COUNTRY* in LDAP and stores all the results in one contact entry
SCPP-4505: LDAP: no lookup of number to LDAP contact of incoming call or dialed number
NONE: Wrong number shown when LDAP entry for incoming call has more than one number attribute
SCPP-4407: Cannot dial if the beginning of the dialed number is found in LDAP and then the final number is no longer found
WUI
SCPP-4516: Function keys settings aren't stored properly
SCPP-4441: WUI "Play ringer" does not work
SCPP-4399: Error in log by bootup "wrong data CRC in data node" should not appear
SCPP-4128: Core dumps cannot be downloaded reliably using support.htm
SCPP-4487: Keypresses show up in syslog of the phone if US or GB tone scheme is used
SCPP-4439: The settings URL http://<ip>/settings.cfg can not be fetched when the phone is in user mode and the right admin password is used

8.7.3.15 Bugfixes

PUI
SCPP-4144: Removing of Call Completion message will hang the phone (WUI and PUI)
SCPP-3793: corrected typo in Internal Directory: Janurary instead of January
SCPP-3823: Keypad debounce causing unexpected 'double-digit' dialing. Intermittent issue occurred once out of ten dials
SCPP-3924: Phone crashes and keeps ringing after Function key "Forward to" is pressed during an incoming call
SCPP-4007: phone misleads in phone menu
SCPP-4107: Languages selections over PUI: phone shows Slovenian and Slovenscina
SCPP-2387: in special case no photo will be loaded into internal directory
SCPP-4126: names are not shown consistently in Call History
SCPP-4137: 'Starred' DTMF digits are displayed inverse
SCPP-4093: Seeing identity name on display on incoming calls
SCPP-4147: System messages can not be opened out of the PUI menu
SCPP-4162: deletion of input disturbed after using LDAP
SCPP-4168: Favorites List doesn't show added entries
SCPP-4176: Hot Desking: Function key - Logoff Identifies doesn't work on Snom 300
SCPP-4183: Blind transfer not working when transfer target being dialed with function key (key type = extension)
SCPP-4242: Caching of display name now configurable using cache_contact_details
SCPP-4389: F_HOLD not activating LED when call is on hold
SCPP-4361: Changing option show_clock does not reflect immediately
SCPP-4323: Since 8.7.3.x numbers of incoming calls aren't matched correctly to the phone book like in 8.4.35
SCPP-2958: Retrieve key not working with speed dial + DTMF
SCPP-4278: Call is not listed in the missed calls list if user rejects the call
SCPP-4253: In Call History, names are not shown consistently
SCPP-4022: "Goto virtual keys on activity" does not work when key type is Contact List Buddy -> new setting states_ignored_in_goto_vkeys_on_activity
SCPP-4248: Numbers in call-monitor-view get truncated after 12 digits
SCPP-4129: Crash on snom 300 after 656 transfers
SCPP-4121: Extension Monitoring: new incoming call for monitored extension overrides the old one even though the call is not answered
SCPP-4182: Missed calls aren't signalled any more via message LED and display if missed calls where deleted via pressing INFO soft key before
SCPP-4176: Hot Desking: Function key - Logoff Identifies doesn't work on Snom 300
NONE: make displayed name scroll on snom 870 during a call, just like all the other models do


SIP
SCPP-3946: Unhold doesn't work with snomONE any more
SCPP-3750: When doing attended transfer, REFER is sent to C instead of A
SCPP-4205: Hold/unhold not possible after 30min in active call
SCPP-3008: Hold not working if holding party is anonymous
SCPP-3889: Call Deflection via Call Forwarding key (also with key SpeedDial) and redirect_ringing=off is successful
SCPP-4171: Call Park feature: Call Logs showed ugly format or where loosing the display name after unparking the call
SCPP-4074: Transfer: cannot end call if I received no NOTIFY after REFER
SCPP-4386: Wrong handling from "Diversion" header, cases that a call which was forwarded won't forward again
SCPP-4377: Park+Orbit not working. Call can be transferred and retrieved but for one time only
SCPP-4311: call released by remote party due to missing ACK
SCPP-4301: "Transfer failed" error message when performing an attended transfer hitting the keys pretty fast
SCPP-3970: SIP INFO requests are rejected with 489 Bad Event
SCPP-4094: DTMF key types not working unless user_dtmf_info is enabled
SCPP-4319: subscribe transaction timeout error does not restart subscription
SCPP-4297: 3CX: After attended transfer is completed, new call shows wrong call partner
SCPP-3760: Phone (member of ring group) remains ringing even when another phone picks up the call
SCPP-1330: phone hangs up secure conversation on hold after session timer has expired
SCPP-4217: DFKS results in subscribe without Body -> DFKS not working
SCPP-4112: comma leads to parsing problem with sip_cancel_reasons_to_ignore_missed_call


PROVISIONING
SCPP-3921: "Provisioning server failed" displayed although DHCP provisioning succeeds
SCPP-4115: phone doesn't try all protocols if DHCP option 66 sends only IP address
SCPP-3855: After factory reset phone doesn't send subscriptions configured for expansion module
SCPP-4355: If a new account is reprovisioned during a call, the following REGISTER and INVITE packets still have some old information
SCPP-4334: If SIP password is changed via provisioning it seems not to get active
SCPP-4316: On Provisioning tbook is not being saved permanently
SCPP-3858: provisioning of phone GUI customization can cause the phone to stuck in reboot loop
SCPP-4239: snom710 does not automatically restart after 5 minutes on a failed software update
SCPP-4174: On provisioning using redirection server with not resolvable URL phone gets into endless loop
SCPP-4151: Provisioning through TR069 (Friendly): phone does not realise that provisioning is finished


NETWORK
SCPP-3832: Ethernet switch properties can neither be accessed nor adjusted
SCPP-2762: WLAN not working if SSID and / or pass phrase contain one of the following special characters: "<>'&
SCPP-4089: DNS: Underscore in default host name violating RFC
SCPP-4053: Not well formed DHCPREQUEST in RENEWING state
SCPP-3864: VLAN is not working
SCPP-3920: snom 720/821 display wrong status on boot up when trying to authenticate with 802.1X on Freeradius server
SCPP-4409: The phone sends multiple DHCP INFORM messages at a time
SCPP-3875: DST of Namibia and Turkey isn't set correctly
SCPP-4128: Core dumps cannot be downloaded reliably using support.htm


WUI
SCPP-4033: Secure web interface (https) is slow and slows down the phone
SCPP-4038: WUI Access via HTTP is not possible when setting 'dns_domain' is empty using web browser Safari
SCPP-4173: WUI message 'Apply setting changes? Reboot' is not shown on all WUI pages
SCPP-3852: access via HTTPs not possible with Chrome
SCPP-4119: Wrong displayed German umlauts in web interface confirming message
SCPP-2256: Defined outgoing line being ignored when dialing out of directory using web interface
SCPP-4327: WUI does not accept requested HTTP Host instead the local IP is written into a link at several features
SCPP-2218: the button "Play Ringer" doesn't work when selecting the customer melody as user_ringer
SCPP-4104: snom720 and snom760 showed the Mic volume settings on the web interface despite the fact that they can not be changed because of TIA requirements
NONE: Show USB headset Audio Option for 720 and 760 only
NONE: Adjusted German translations of PUI and WUI
NONE: support.htm of 3xx phones is showing 'WUI core download option' even though 3xx phones aren't supporting it


AUDIO
SCPP-3751: snom 710: Phone sends a creaking noise after redial is accepted
SCPP-3348: Media stack crashes (and reboots) when USB Blue Tooth is enabled first time after pairing by pressing the headset hard key
SCPP-4138: Audio: MediaStack restarting and "All lines will be closed" on the display if snom 760/720 is using a Wireless Headset (through USB) not in sync
SCPP-3887: PA1 does not play ringer, when Autoanswer has been switched off
SCPP-3952: Pressing +SPKR key in handset mode (change to open listening mode) mutes the Handset speaker
SCPP-4393: Wireless Headset: Putting a conference on hold and then resuming it again leads to MediaStack restarting
SCPP-4330: snom 300 only shows 4 of available 10 ring tone melodies in PUI
SCPP-3815: pickup_indication doesn't work any more
SCPP-4320: disabled allow_rtp_on_mute has no effect (snom 720/760 only)
SCPP-4308: No audio after unhold with holding_reminder set to "on"
SCPP-4298: Multicast Paging send and receive not working
SCPP-4223: Audio: 5-part conference doesn't work properly on snom 710
SCPP-4286: When remote side is busy or rejects call, the busy tone is not heard
SCPP-4276: Audio fails if the first conference participant presses hold in 4-part conference
SCPP-3730: phone does not ring if call is on hold and incoming call (suppress_ringing_during_hold:off, cw_dialtone:off)
SCPP-3892: Plantronics CS540 fast dialing for calls initiated by headset could result in not dialing out


LDAP
SCPP-4360: ldap_predict_text does not search all combinations
SCPP-3507: LDAP directory with "predict text" enabled (T9), find only entries with the first letter of the button and a dot


SETTINGS
SCPP-4283: inconsistent entries for gui_fkey1 to gui_fkey4 ("key_event" needs to be replaced by "keyevent")
SCPP-4155: XML Dial plan doesn't work if two matching strings with same length of chars exist in dial plan
SCPP-4226: Watchdog isn't rebooting system anymore
SCPP-4091: Can't set a match string dialplan.xml to be *


XML BROWSER
SCPP-4254: Phone does not exit from XML minibrowser at the end of the call
SCPP-4336: When the XML Minibrowser shows an XML with a SnomIPPhoneImageFile Tag the Softkeys don't work and the image disappears.


VPN
SCPP-3142: the WWW-Contact headers should contain the openVPN address if the SIP packets are sent through the tunnel
SCPP-3806: Snom 710: VPN isn't working

8.7.3.10 Bugfixes

AUDIO
SCPP-4076: Audio: after a few minutes of call I get no audio and then after hanging up I cannot make any new calls
SCPP-4042: No audio in the next calls after connect with incorrect codec in SDP of "200 OK"
SCPP-4040: When the phone plays a dial tone on handset/headset and the phone goes onhook the dialtone can be heard for a short period on the speaker.
SCPP-4008: VAD/CNG not working with G.729AB on snom821/870
SCPP-3980: snom760 shows an audio artifact every 5 second in certain environments when RTCP packet are received
SCPP-3887: PA1 does not play ringer, when Autoanswer has been switched off
SCPP-3867: Ringer tone in Handset if handset was not hung up after previous connection
SCPP-3850: snom 320: sends a constant beep noise after call deflection
SCPP-3819: Lync: CN (Comfort Noise) is not played if snom receives CN RTP packets
SCPP-3815: pickup_indication doesn't works any more
SCPP-3707: BUSY signal played out in speaker mode even though handset or headset is selected
SCPP-3263: Phone plays ringback-tone if 183 is received without SDP - even if there was no 180 Ringing
SCPP-2570: Multicast doesn't work after a call is received
NONE: Discard buffered DTMF tone when stop command is received before playing
NONE: dial tone and ringback dosn't work after call with comfort noise enabled
NONE: synthesizer dosn't work after call with comfort noise enabled
NONE: avoid codec switch on incoming silence packets for 720/760
PUI
SCPP-3938: Identity index is shown twice before the remote call partner
SCPP-3979: Not delete the selected entry in all Call History lists (Missed, Received, Dialed)
SCPP-3704: After setting a caller to the Deny-List by "long-press" the Cancel Button the caller is still able to call the phone
SCPP-3948: OCI-P - Directory keys should be set by default to OCIP if setting user_server_type is set to 'Broadsoft'
SCPP-4069: No ringing during attended transfer on incoming call. This is a call waiting scenario, so Call Waiting should be indicated. New setting call_states_when_knocking
SCPP-4007: phone misleads in menu
SCPP-3994: Phone puts current call on hold while on speaker, getting a new incoming call and picking up the handset. Switching the device should always stay with the current call.
SCPP-3972: unknown shown as caller ID for all held calls
SCPP-3954: Mute symbol is not indicate when the microphone of the active audio device has been muted. Snom300/320 now display a symbol when MUTE is activated during a call
SCPP-3924: Phone crashes and keeps ringing after Function key "Forward to" is pressed during an incoming call
SCPP-3903: Line Info Layer - is really ALWAYS visible if set to on
SCPP-3896: Snom 870: Call LED keeps blinking and display shows "1 missed call" although call list has already been viewed
SCPP-3882: PUI: snom300 - internal address book cannot dial first entry ad hoc
SCPP-3873: Setting an empty display name for identity through phone menu results in __Y__
SCPP-3865: SnomMP does not show fkeys "Kick" and "Split" in conference
SCPP-3839: Broadsoft - DUT shows HOLD state even when HOLD Request was rejected / Unhold not possible
SCPP-3828: The phone doesn't start ringing when a 2nd incoming call is already waiting and the 1st call is terminated by going on-hook
SCPP-3823: Calling Features: Dialing - Keypad debounce causing unexpected 'double-digit' dialing. Intermittent issue occurs once out of ten dials.
SCPP-3813: Going on-hook doesn't terminate the active call during call waiting scenarios
SCPP-3796: snom870: not possible to set up encrypted WiFi via PUI
SCPP-3792: (snom7xx) When a Plantronics USB headset is used, the phone is in idle, headset is not selected and the headset button is pressed, the phone will toggle between idle and call screen.
SCPP-3784: Line Info Layer disappears on incoming call
SCPP-3773: Graphical Issues when pressing function key for system info while in a call
SCPP-3712: Call toggling didn't update remote call partner on display
SCPP-3613: "Number Guessing" with LDAP is not usable
SCPP-3335: Lock symbol not shown in SRTP/TLS call
SCPP-2823: Hebrew texts are not written right to left on PUI
SCPP-3706: Call Completion doesn't work consistently
SCPP-3654: Redial list bug after calling a phone in DND mode (snom 360 only)
SCPP-3795: pressing redial key twice doesn't lead to dialing the last dialed number.
SCPP-3827: Snom320 reacts very slowly over time (visible through delayed blinking of clock colon) and finally crashes
SCPP-3981: snom821 freezes in idle state
SCPP-3989: calls disappear due to very fast brokering via touch gui (snom 870 only)
NONE: using 15 volume steps in GUI although audio only has 8 (snom720)
LDAP
SCPP-3200: Phone shows ??? for some ActiveDirectories schemas
SCPP-3884: the phone should hide the LDAP search display if the search had no results during number guessing
SCPP-3812: it takes much too long between the first and second LDAP search when dialing and using number guessing
SCPP-3976: LDAP directory search is not usable for fast input
SCPP-3922: Delay during dialing with enabled number guessing (third digit displayed too slowly)
PROVISIONING
SCPP-4111: Phone shows 'Provisioning in progress' repeatedly when using TR-069
SCPP-4027: cannot provision with tftp:/hostname
SCPP-4004: Function key assignment not updated on settings sync (no subscriptions being sent out)
SCPP-3974: phone retries to provision several times and then says Provisioning failed although provisioning succeeds
SCPP-3971: Configured provisioning_order not being followed properly (after successful provisioning phone should start and don't send additional requests)
SCPP-3959: when provisioning with DHCP option 66, phone still tries to get snom300-firmware.htm from provisioning.snom.com
SCPP-3921: server failed display although DHCP provisioning succeeds
SCPP-3898: server failed display although provisioning is disabled
SCPP-3871: Canceling provisioning request results in incomplete error message
SCPP-3870: MKA: After FW update SIP account gets lost and provisioning via TR69 doesn't work anymore
SCPP-3810: extension key issues dialog-subscription although user_server_type is set to 'Broadsoft'
SCPP-3800: PnP does not work in VLAN environment
SCPP-3725: Can't cancel provisioning request if server is not reachable
SCPP-3420: TR69 - Motive closes connection after Device. GetParameterValues
WUI
SCPP-3911: only up to 64 https web client requests are possible
NONE: support.htm of 3xx phones is showing 'WUI core download option' even though 3xx phones aren't supporting it.
NONE: Adjusted German translations of PUI and WUI
NONE: New PUI and WUI translations for Turkish
NONE: Small changes in Italian and French
NETWORK
SCPP-4089: DNS: Underscore in default host name violating RFC
SCPP-4076: Audio: after a few minutes of call I get no audio and then after hanging up I cannot make any new calls
SCPP-4053: Not well formed DHCPREQUEST in RENEWING state
SCPP-3810: extension key issues dialog-subscription although user_server_type is set to 'Broadsoft'
SCPP-3778: rtp_early_media_ring_fallback seems not to work
SCPP-3777: missing SDP offer on the first response to an incoming INVITE w/o SDP
SCPP-3742: (snom 820) Wifi is not working with Ralink 3070 USB stick.
SCPP-3732: Multicast - Paging not working if Multicast Listening is activated at the same time
NONE: Domain parts delivered via DHCP option 120 were separated wrongly by ':'
NONE: Improved ethernet cable detection - first cable state event can result in a reregister before inital setup is complete
NONE: Improved ethernet cable detection - removed state_cable to not block the phone when cable is pulled - message and status message are shown instead - with configured WLAN only status message is shown - only state changes are now propagated from LID to LCS to eliminate unnecessary cable events in WLAN scenario
SIP
SCPP-4077: cannot make simple conference on Teles server
SCPP-4002: 720s locking up in local 'hold'
SCPP-3978: Incoming INVITE with Require: 100rel, but without Supported: 100rel header should trigger PRAck flow
SCPP-3946: Unhold doesn't work with snomONE any more
SCPP-3008:Hold not working if holding party is anonymous
SCPP-3232: lost register after INVITE with RFC 2543 Syntax
SCPP-3748: Park+Orbit not working. Call can be transferred but not retrieved
SCPP-3750: When doing attended transfer, REFER is sent to C instead of A
SCPP-3776: snom sends sendonly instead of receive only after multiple HOLD/UNHOLDS
SCPP-3805: Call deflection fails if transfer target is dialed using fkey type extension
SCPP-3889: Call Deflection via Call Forwarding key (also with key SpeedDial) and redirect_ringing=off is successful
SCPP-3840: Broadsoft - Timer Support - Phone adds required header even when not necessary/not advised
SETTINGS
SCPP-4101: PhoneWantsReboot and PhoneHasDisabledSipStack are written together in status_msgs_that_are_important
XML BROWSER
SCPP-4003: Broadsoft - DFKS - DUT crashes when using ACD feature
SCPP-3996: XML-minibrowser <SoftKeyItem>-elements are not displayed if context sensitive keys (F1-F4) are addressed
SCPP-3579: minibrowser.htm does not replace Query variables correctly
NONE: Render display after translation of fkeys (label, icons) for main tag SnomIPPhoneText.
HEADSET
SCPP-3892: Plantronics CS540 fast dialing for calls initiated by headset could result in not dialing out
NONE: snom BT USB Headset did not work anymore
TR-69
NONE: TR-069 missing initialization
NONE: Provisioning via TR-069 isn't becoming active without reboot.
NONE: TR-069 Motive Policy chaining was not working as phone accepted more than one connection request.
NONE: If TR-069 is used checksync NOTIFY triggers a connection request.
Vision
SCPP-2388: Snom Vision Speed Dial: Cannot initiate/cancel outgoing calls or answer incoming calls

8.7.3.7 Bugfixes

UC
SCPP-3645: DTMF issue in 911 scenarios with enabled keyboard lock
PUI
SCPP-3684: Phone doesn't show correct name out of internal address book if entry was changed
SCPP-3659: Caller picture doesn't work.
SCPP-2579: stop refresh timer for digital clock in case of showing XML idle screen
SCPP-3649: After LDAP query delete digits by number editing doesn't work (snom 870 only)
SCPP-3653: LDAP - incoming call: name from LDAP directory is not complete on the LCD, if show the incoming/missed call list.
WUI
SCPP-3687: Pressing # Key via remote doesn't work any more.
SCPP-3636: Option to force Gigabit Ethernet is missing. (snom720, snom760 only)
NETWORK
SCPP-3655: 'netcat' server port does not get applied
SCPP-3582: Phone doesn't display why it's restarting on DHCP server sending DHCP NAK/Decline
SCPP-3657: PnP does not work, phone replies with 404 to NOTIFY.
SIP
SCPP-3651: Broadsoft: Voicemail-Retrieve - DUT should call user mailbox index if message account not specified in MWI NOTIFY
SCPP-3588: DTMF Outband SIP INFO: keytones for "star" (*) is not working any more
SCPP-3595: send 481 Reject again on initial Invite with To-tag

8.7.3.6 Bugfixes

SIP
SCPP-3506: FIX - Broadsoft - Session Audit - DUT does not send SIP 481 (Call Leg) after power cut, 481 will be sent if to tag of req is set
SCPP-3601: FIX - Broadsoft - SCA - DUT activates second sca line key after receiving 403 Forbidden
PUI
SCPP-3565: FIX - Snom870 Internal Directory: formatting errors in Directory Key
NONE: FIX - Language name of Slovenscina is misspelled
SCPP-3465: FIX - LED behaviour after pressing Function Key (Redial, Directory) not correct/inconsistent
SCPP-2579: FIX - XML Idle Screen - Always shows Digital Clock.

8.7.3.5 Bugfixes

AUDIO
SCPP-3592: FIX - (snom8xx) The first button pressed while trying to dial a number with German tone scheme is always heard.
SCPP-3627: FIX - (snom821, snom870) Using outband DTMF in a call, although inband is negotiated.
PUI
SCPP-3602: FIX - Delete fkey is wrongly displayed as "F_DELETE" within call lists screens.
SCPP-3568: FIX - Malformed error message if LDAP isn't initialized.
SIP

SCPP-3586: FIX - If the internal address book has a lot of entries, the SIP responses of the phone are delayed.

TLS
SCPP-3622: FIX - Could not register via TLS with Lync Server.
PROVISIONING
SCPP-3551: FIX - Provisioning fails and endless loop when client http username/password are used. Was affecting all kinds of webclient requests

8.7.3.4 Bugfixes

AUDIO
SCPP-3606: FIX - No synthesizer sound output on snom720/760 after dialing a not existent number on UC account
NETWORK
SCPP-3616: FIX - (snom821/870/720/760) Freeze during boot if Wifi is configured but no Wifi stick is present.
PUI
SCPP-3518: FIX - Broadsoft - AOC-D - Total charge in last 200 OK not presented in PUI if DUT hangs up.
SCPP-3563: FIX - Cannot delete entry of internal addressbook via PUI. (snom300 only)
SCPP-3567: FIX - Missed calls can't be deleted and no user details are shown.
SCPP-3587: FIX - Phone does not display incoming desktop messages correctly. Don't show 'From' information. Only the message text should be shown. (snom720 only)
SIP
SCPP-3549: FIX - UPDATE-messages are answered with 500 Server internal error.
SCPP-3571: FIX - Broadsoft - DFKS subscription handling on network loss.
SCPP-3597: FIX - Broadsoft - Reboot initiated by changing display name.
TLS
SCPP-3519: FIX - Empty TLS certificate option needs to be split for HTTPS and SIPS.
UPDATE
SCPP-3608: FIX - Reboot loop or failing update if making update via provisioned ASCII-text-based setting file. Comparison of old and new firmware URL is now using WebUri class to avoid string compares which may lead to wrong results.

8.7.3.3 Bugfixes

PUI
SCPP-3183: FIX - Keyboard freezes sometimes (snom 821 only)
NONE: FIX - Call list entries already in contact pool, are not properly handled during initialization from config.xml. They had the wrong memory manager id
SCPP-2732: FIX - Attended transfer by pressing the transfer key twice is not working any more. Attended transfer on calling inconsistency across devices (snom 300 only)
SCPP-3535: FIX - Attended transfer on calling inconsistent across devices
SCPP-3542: FIX - redial hard key or soft key doesn't do redial. (snom 870 only)
SCPP-3552: FIX - If the local address book has a lot of entries and the call lists (missed, dialed, received) are full, the phone reacts very slowly on keys redial and soft key call history
LDAP
SCPP-3121: FIX - LDAP lookup for outgoing call is not working correctly
SIP
SCPP-3497: FIX - Phone reboot on missing SDP m lines
SCPP-3506: FIX - Broadsoft - Session Audit - DUT does not send SIP 481 (Call Leg) after power cut
SCPP-3524: FIX - Broadsoft - SCA - DUT sends UNSUBSCRIBE after not succesful SUBSCRIBE (SIP 480) + LED stays on.
SCPP-3545: FIX - Broadsoft - Connected Line Presentation Update after Call Forward - DUT does not answer with ACK to 200 OK.
UPDATE
NONE: FIX - (snom7xx, snom8xx, snomMP) Update isn't working in load balanced web server environment. Providing now unresolved FQDN in update URL.
NONE: FIX - Provisioning using an invalid setting server URL was not handled properly.
SCPP-3479: FIX - phone does not restart if FW download server is not available.
SCPP-3482: FIX - If a software update fails, the firmware status stays untouched and prevents further updates using the same version. Now status message shows failed update hint and allows retry. Removing new status message FirmwareUpdateFailed from settings status_msgs_that_are_important, status_msgs_that_are_essential or status_msgs_that_show_directly avoids showing the new status message. Setting value of firmware_interval can be set to 60 or bigger only to avoid to fast loops if firmware update fails.

8.7.3.2 Bugfixes

SIP
SCPP-2638: FIX - OCS: Phone does not retry connecting with an exponential back-off algorithm in case of network loss. Use now new setting retry_after_failed_register for random reregistering after reboot, ethernet replug or TCP reconnect.
SCPP-3475: FIX - snom370 rejects a ringing call twice.
SCPP-3481: FIX - Broadsoft - SCA - Call Info Public Hold / Bridging is not working
SCPP-3483: FIX - a VIA line with SIP/7.0/UDP will be rejected, but not to the network
PUI
NONE: FIX - entering LDAP-screen failed: when pressing "remote-addr.book in idle" and then selecting LDAP in pop-up-choice (between contacts and LDAP) the PUI displayed LDAP-screen for a split-second but immediately returned to idle (snom 870 only)
NONE: FIX - Support-menu did not display correctly. Second line was: "navigate your webbrowser ..." instead of: "navigate your webbrowser to:" (snom 820 only)
SCPP-2823: FIX - Hebrew texts are not written right to left on PUI - changed selected-line-marker on 300/320-selection-list so our Hebrew-reorder-routines properly detect them and flip from > to <.
SCPP-3471: FIX - Some list box views like Help Screen or Settings Menu don't have context keys. Via new setting show_redundant_context_keys it can be configured to generally show navi-keys as context keys in minibrowser if it is displaying a list and doesn't have context keys defined on its own.
SCPP-3472: FIX - Title of Directory screen is wrong.
SCPP-3485: FIX - Initiating a transfer by pressing the transfer key 2 times does not work anymore. Now showing transfer proposal und edit-area. As soon as user starts typing, proposal to the hold-guy disappears and a transfer-press would blind-transfer to typed-in number. (snom870 only)
SCPP-3486: FIX - Name from internal address-book not shown during call
SCPP-3487: FIX - LDAP: wrong icons for selection of the upper, lower cases and numbers. Minibrowser now displays icons for known keys for snom870 as well. Removed tracking-mechanism in contact_list.xml, since with it, after typing a few numbers, one cannot simply exit by pressing X, since it goes back in history for each single character instead.
SCPP-3490: FIX - Payment info (AOC) is not shown when call is terminated locally.

8.7.3.1 Bugfixes

AUDIO
SCPP-1312: FIX - srtcp mac check
SCPP-2396: FIX - Keytones don't work
SCPP-2542: FIX - DTMF tones while dialing not working on 821/870
SCPP-2976: FIX - no ringing on snom3xx models after an previous call with comfort noise enabled
SCPP-2989: FIX - add Lync Features to MediaDaemon (without ICMP)
SCPP-3054: FIX - Audio: One-way-audio if different codecs from the SDP are used
SCPP-3261: FIX - Terminate sounds are played very loud and can't be changed via volume keys
SCPP-3271: FIX - OCS: snom3xx doesn't send DTMF tones correctly when navigate thru IVR
SCPP-3337: FIX - Lync: One-way audio over TCP relay connections with snom821 when G.722 is negotiated
SCPP-3388: FIX - No Audio with G726-32 on snom821/870
SCPP-3391: FIX - DTMF stops audio
SCPP-3461: FIX - Calling Features: DTMF - snom 760 sends last digit of dialed number for INVITE as DTMF
SCPP-2830: FIX - Multicast Paging: Can't switch between speaker/handset during an active multicast on the destination site
NETWORK
SCPP-3449: FIX - Phone doesn't do DHCP on Windows DHCP environment
SCPP-2862: FIX - IPv4 conflict probing was sometimes not working due to eth0 startup delay
SCPP-2862: FIX - IPv4 conflict shows the remote MAC address
NONE: FIX - (snom7xx, snom8xx, snomMP) Update isn't working in load balanced web server environment. Providing now unresolved FQDN in update URL.
LDAP
SCPP-3397: FIX - ldap_max_hits > 127 will cause LDAP lookup requests to fail with "invalid size limit"
SCPP-3653: FIX - incoming call: name from LDAP directory is not complete on the LCD, if show the incoming/missed call list
SCPP-3364: FIX - LDAP - Predict Text is not working as designed
LLDP
SCPP-2586: FIX - advertise received dscp value if untagged
CSTA
SCPP-3402: old-style http-csta is broken
PROVISIONING
SCPP-3450: FIX - Provisioning priority handling not working properly. Fixed case when setting server is pointing to known IP, which isn't running a server at the given port.
SCPP-3086: FIX - SIP SUBSCRIBE PnP provisioning does not have priority over option 66 after NOTIFY without reboot. Added new internal setting pnp_server which holds the value of the SIP PnP setting server
SCPP-3158: FIX - No VPN-tarball fetching without successful provisioning
SCPP-3372: FIX - Branding not implemented (snom720 only)
SCPP-3657: FIX - PnP does not work, phone replies with 404 to NOTIFY
PUI
SCPP-2579: FIX - XML Idle Screen - Always shows Digital Clock
SCPP-3635: FIX - pressing twice OK key doesn't dial the latest dialed number
SCPP-3637: FIX - Status information - context sensitive function key stucks
SCPP-3465: FIX - LED behaviour after pressing Function Key (Redial, Directory) not correct/inconsistent
SCPP-3603: FIX - touch screen: "upper/lower/number switch" and "DELETE button" don't work any more (snom 870 only)
SCPP-3565: FIX - Internal Directory: formatting errors in Directory Key (snom 870 only)
SCPP-2499: FIX - OCS Directory Search: Error when hitting backspace
SCPP-2501: FIX - 320: Canceling ringer selection leads to account & registrar request
SCPP-2577: FIX - CallerID: The callerID appears wrong after Transfer
SCPP-2960: FIX - skip emergency number normalization on OCS/Lync accounts only
SCPP-3094: FIX - Add active & idle back light setting (snom370 only)
SCPP-3170: FIX - Reset via Web-GUI and selecting a language results in all prompts are in English and even predefined values (time zone, tone scheme) are as English was selected
SCPP-3227: FIX - DUT does not update Caller Name on Display if changed in sequential calls
SCPP-3233: FIX - Same button icon for "Change Active ID" and "Presence State" (snom 760 only)
SCPP-3239: FIX - Call completion (CC) button displays text instead of icon.
SCPP-3302: FIX - If the display name of the callee is too long the name is cutting off. It doesn't scroll. Scrolling is still not implemented but text is wrapped if ringer_animation is disabled (snom 370 only)
SCPP-3313: FIX - Lync: Message LED won't turn off and status Information doesn't blink
SCPP-3326: FIX - partial_lookup setting too liberal
SCPP-3335: FIX - Lock symbol not shown in SRTP/TLS call.
SCPP-3338: FIX - Keyboard lock can be circumvented by rebooting the phone
SCPP-3354: FIX - Phone does not react on context sensitive key "OK" for turning on DHCP
SCPP-3362: FIX - Lync: Emergency call looses audio if "Transfer" is pressed.
SCPP-3366: FIX - Lync: Line switching during emergency call is not blocked
SCPP-3369: FIX - Lync: Wrong remote party displayed after transfer to external number by Lync client
SCPP-3370: FIX - Menu diction in the German phone PUI is bad
SCPP-3374: FIX - nexpected string from SIP header is shown by incoming transfer call (snom870 only)
SCPP-3389: FIX - Icon Tag in Minibrowser does not load icons from HTTP URLs any more
SCPP-3413: FIX - Star digit is causing wrong editing behavior in alpha mode
SCPP-3427: FIX - Message about DHCP request is not shown on the screen (snom320 only)
SCPP-3442: FIX - The configuration file for fkeys 'fkey.xml' can not be saved to flash since it is too big if XML definitions are being used. The limit is 150k now, it was 20k.
SCPP-3446: FIX - Call lists cannot be cleared
RTCP
SCPP-1335: FIX - incorrect packet and octet count in RTCP Sender Report
UC
SCPP-2806: FIX - User needs to be able to change the http server user and password (http_user, http_pass) and the ocsip user and password (ocip_username, ocip_password) when user mode is on
SCPP-3417: FIX - Double/interfering ring tone on with UC version when calling an external number (snom 720/760 only)
SCPP-3437: FIX - LYNC: Snom 300 crashes and restarts in call deflection scenario of Lync client
SCPP-3316: FIX - Lync: Call between Aries IP Phone and Snom 300 from different Pools causes snom 300 to crash and reboot
SCPP-3387: FIX - Lync: Resolution of FQDN for AV-edge server fails if more than one A record is returned
SCPP-3295: FIX - LYNC: redial with E.164 causes a malformed INVITE request
SCPP-3145: FIX - OCS: call cannot be terminated after changing the OCS Account Data to another OCS user (remoteUser only)
SIP
SCPP-3405: FIX - Phone no longer creates subscriptions for Vision virtual keys
SCPP-3406: FIX - Phone doesn't create subscription for BLF buttons with context "Active"
SCPP-3601: FIX - Broadsoft - SCA - DUT activates second SCA line key after receiving "403 Forbidden"
SCPP-1140: FIX - remote party may transfer a call in a local conference
SCPP-1633: FIX - Broadsoft SLA - Barge-in changed from SRTP to RTP and vice versa
SCPP-2841: FIX - identity 12 outbound proxy will be used to filter also requests directly to the phones IP address
SCPP-2863: FIX - Broadsoft: CFA doesn't work properly. correct subscribe is sent too late
SCPP-3153: FIX - Request Start Line and CSeq Method Mismatch (RFC 4475 Page 32 3.1.2.17)
SCPP-3206: FIX - Broadsoft - Connected Line Restriction after CFW - DUT does not show restricted number
SCPP-3211: FIX - automatic reregister on 423 Interval too brief response
SCPP-3221: FIX - incoming diverson-inhibit param to avoid phone diversion
SCPP-3223: FIX - Broadsoft - DFKS - DND Synchronisation only with active identity
SCPP-3225: FIX - Broadsoft - Agent Logged_In triggers also SUBSCRIBE for "Agent State Not Ready"
SCPP-3229: FIX - Broadsoft - SCA - Refresh Line-seize fails
SCPP-3258: FIX - Broadsoft - BLF - Parked Against indicator. A slow blinking LED indicates Parked Against state.
SCPP-3246: FIX - fix double DTMF via SIP INFO and RTP stream
SCPP-3251: FIX - Broadsoft - Network based 3way - Server does not accept REFER
SCPP-3398: FIX - Phone looses subscription after some time.
SCPP-3422: FIX - Phone sends 180 Ringing too late, resolved by sending 100 Trying earlier
SCPP-3451: FIX - for orange, the Refer-To header SHALL contain the addr-spec of URI rec in the Contact header of the 200 OK resp to the INVITE sent to the conference
SCPP-471: FIX - reworked music on hold to supported SRTP
WUI
SCPP-3415: FIX - Remote numbers are not shown in call lists of the flash plugin anymore if Flash plugin is enabled
SCPP-3447: FIX - Selecting item from WUI call list crashes phone
SCPP-2969: FIX - Phone hangs if PCAP Trace is retrieved during call and trace is not stopped

8.7.2 Bugfixes

PUI, Minibrowser
(8.7.2.9) SCPP-2577: FIX - Caller ID: The Caller ID appears wrong after Call Transfer.
(8.7.2.8) NONE: FIX - (snom300) Secure communication lock icon is never shown.
(8.7.2.8) SCPP-2977: FIX - E.911 fails to submit location on redial. Call an Emergency number out of a Call List works now.
(8.7.2.8) SCPP-3169: FIX - (snom720, snom760) Russian and Hebrew fonts are missing.
(8.7.2.8) SCPP-3170: FIX - Store/Apply Language change immediately if wizard is running.
(8.7.2.8) SCPP-3219: FIX - Saving/reloading of call history lists is faulty.
(8.7.2.8) SCPP-3281: FIX - (snom870) No call transfer with number from contact pool (call list) possible.
(8.7.2.8) SCPP-3286: FIX - Action URL for event on hook not always being sent.
(8.7.2.8) SCPP-3289: UPD - (snom720, snom760) Check whether 4+1 conference is possible (currently pure unencrypted G722 only).
(8.7.2.8) SCPP-3305: FIX - unknown is shown instead of Caller ID on in- and outgoing calls.
(8.7.2.8) SCPP-3288: FIX - (snom760) LED indication for missed calls is missing.
(8.7.2.7) SCPP-3276: FIX - (snom760,snom820,snom821) Selected ABS line isn’t scrolling until the whole line is shown. Text scrolling range was very limited. Increased to twice the display size.
(8.7.2.7) SCPP-3277: FIX - Selected ABS line isn’t called by lifting handset. Lifting handset in ABS/LDAP will call the entry now.
(8.7.2.7) SCPP-3279: FIX - (snom300) Can’t set HELP on Fkey in state idle.
(8.7.2.7) SCPP-3280: FIX - (snom300, snom320) Phone does not scroll horizontally in ringing state. Adjust scrolling width if arrows are displayed in selection list.
(8.7.2.7) SCPP-3284: FIX - (snom820,snom821) PUI shows lock symbol after deactivating keyboard lock.
(8.7.2.7) SCPP-3285: FIX - (snom300) No backspace available in edit transfer number.
(8.7.2.5) SCPP-2766: FIX - Caller ID update on the phone using SIP INFO issue.
(8.7.2.5) SCPP-3236: ADD: New menu entry call voicemail in Identity menu. If new voice messages are available offer retrieve on ENTER key (snom300).
(8.7.2.5) SCPP-3260: FIX - Scrolling with navigation key doesn’t work properly in Time Zone and Tone Scheme selection. Accept navigation key events in sequence only and not in parallel.
(8.7.2.5) SCPP-3264: FIX - Was missing feedback after a new contact has been created. Show saved message for internal Directory handling.
(8.7.2.3) SCPP-3182: FIX - Inform Contact Pool about chosen LDAP contact. Then it can be used for showing contact details on screen. Fixed wrong comparison of parallel requests.
(8.7.2.2) SCPP-3172: ADD - Show prompt for Directory Search.
(8.7.2.2) SCPP-3196: FIX - (snom360) Is using UTF8 chars out of bounds.
(8.7.2.1) SCPP-2998: FIX - Preselection is dialed immediately when phone goes offhook. Don’t dial preselection immediately.
(8.7.2.1) SCPP-3080: FIX - Inform user about DFKS sync failure.
(8.7.2.1) SCPP-3125: FIX - Only one contact number (mobile) is shown in contact search. Show all numbers of a contact in contact search.
(8.7.2.1) SCPP-3130: FIX - Auto Dial in contact lists isn’t working.
(8.7.2.1) SCPP-3132: CHG - Empty Contact List now shows different texts for no results and initial instructions.
(8.7.2.0) NONE: FIX - Light line-key (type: extension) after having picked up remote call with it.
(8.7.2.0) NONE: FIX - (snom300) Can now use again the speaker-key in dial-screen to toggle between headset and speaker.
(8.7.2.0) SCPP-1169: FIX - context key Pool not working correctly. Contact pool refactored and is based on XML now.
(8.7.2.0) SCPP-2126: FIX - (snom300, snom360, snom820, snom870, snom_MeetingPoint) Wizard problems after reset.
(8.7.2.0) SCPP-2195: FIX - (snom360) Inconsistent and wrong behaviour of language and dialtone wizard. Handling is unified now using the wizard (used for timezone, language, tonescheme) for all phone types.
(8.7.2.0) SCPP-2397: FIX - Call Completion doesn’t work with party on hold.
(8.7.2.0) SCPP-2599: FIX - Motion JPEG doesn’t work. Show scaled down images from motion-jpeg-stream.
(8.7.2.0) SCPP-2680: FIX - (snom300, snom320) Call timer on screen freezes when starting Conference. New display design for conference state.
(8.7.2.0) SCPP-2681: FIX - Automatic redial doesn’t show the counter going down. Split or reduce text for Auto Dial display.
(8.7.2.0) SCPP-2683: FIX - Call not listed in received calls on Call Pickup.
(8.7.2.0) SCPP-2687: FIX - XML Dialplan does not behave as expected. Fixed single digit XML dial plan matches.
(8.7.2.0) SCPP-2699: FIX - One character not displaying correctly in text at bottom of screen. Don’t show unprintable characters in status line.
(8.7.2.0) SCPP-2700: FIX - Call Completion offered when phone cancels call. Don’t offer call completion if call was cancelled locally.
(8.7.2.0) SCPP-2701: FIX - Call Completion cancelled but still dial screen visable for a short moment. Don’t switch to state idle if call completion is wanted.
(8.7.2.0) SCPP-2710: FIX - (snom370, snom820, snom821) SRTP and PUI Lock Indication does not work. Show icon for SRTP connection.
(8.7.2.0) SCPP-2718: FIX - Test Ringer played out even after leaving the menu point. Test ringtone will be stopped after leaving the ringtone menu entry.
(8.7.2.0) SCPP-2747: FIX - Expansion Module - Version not shown in System Information. Show count of expansion modules and version number in system information.
(8.7.2.0) SCPP-2750: FIX - (snom300, snom320) Can’t change the input mode (alpha mode, numeric mode) in LDAP Directory. New global edit mode toggles by pressing * for 1sec.
(8.7.2.0) SCPP-2765: FIX - LEDs of Fkey type Call Agent aren’t updated.
(8.7.2.0) SCPP-2780: FIX - Value changes of scroll settings weren’t applied immediately.
(8.7.2.0) SCPP-2803: FIX - You can not dial the entered number when number guessing is on. Key enter will force a query in case of directory search. For number guessing it will dial the input.
(8.7.2.0) SCPP-2814: FIX - Letter T was missing in Hungarian language when entering text within PUI.
(8.7.2.0) SCPP-2819: FIX - Blank screen when LDAP lookup is forced with right navi key. Contact details can be shown with right navi key. If no details available a message will be shown.
(8.7.2.0) SCPP-2848: FIX - Lock Keyboard - After entering new PIN phone stays with Minibrowser message. Now closing keyboard lock message after 3 seconds.
(8.7.2.0) SCPP-2900: FIX - Clearing missed calls with cancel shows Key unassigned.
(8.7.2.0) SCPP-2912: FIX - Extension Monitoring (RFC4662): Incoming Calls on monitored extensions are not mapped correctly and pickup fails. Made pickup via subscription list work.
(8.7.2.0) SCPP-2948: FIX - Message LED not working.
(8.7.2.0) SCPP-2957: FIX - Deleting selected entry in any Call History list doesn’t work. Delete the selected entry and not the first one out of a call list if delete key was pressed.
(8.7.2.0) SCPP-2960: FIX - Don’t normalize emergency numbers.
(8.7.2.0) SCPP-2973: FIX - Selection list of Tone Schemes isn’t working properly. Fix empty selection list in wizard (tone scheme view).
(8.7.2.0) SCPP-2979: FIX - (snom300) Call Deflection and Blind Transfer do not work.
(8.7.2.0) SCPP-2995: FIX - Call Completion offered always even if the called party was not busy. Don’t offer Call Completion in state calling (softkey only).
(8.7.2.0) SCPP-3037: FIX - Number Guessing does not work if entering more than 4 digits. Different handling during number guessing for starting the handler triggered by timeout or by keystroke.
(8.7.2.0) SCPP-3047: FIX - Phone shows only LDAP SN instead of full CN in call screens.
(8.7.2.0) SCPP-3074: FIX - BLF button event HOLD is not working. Line keys of type BUTTON show on hold in Snom8xx PUI when corresponding button is reported to have color hold.
(8.7.2.0) SCPP-3085: FIX - (snom870) GMT +-# is not shown in timezone list. Show timezone hours in timezone menu.
(8.7.2.0) SCPP-3087: FIX - (snom870) Offered dialtone in initial wizard is not always correct. Show pre-selected timezone in list view.
(8.7.2.0) SCPP-3091: FIX - (snom870) Call Completion is offered immediately and misbehaving if call is rejected by callee. Call Completion fixed for redial or local call abort.
(8.7.2.0) SCPP-3097: FIX - It is possible to redial from an empty Call History list. Ignore empty call list entries for redialing.
(8.7.2.0) SCPP-3104: FIX - BLF on snom vision / virtual keys on phone also pop up. Don’t show virtual key activities for external keys (snom Vision, Expansion Module).
(8.7.2.0) SCPP-3105: FIX - Call Transfer/Call Deflection - Numbers of involved phones are not updated/No coherent behaviour. Update display informations of caller based on SIP messages.
(8.7.2.0) SCPP-2702: FIX - Set up 3 SLA lines, incoming call makes two LEDs illuminate. Removed redundant LED control for SLA.
(8.7.2.0) SCPP-3036: FIX - BLF - When transfering monitored extensions, BLF light freezes, no proper indication. Use unique dialog id for state notify.
(8.7.2.0) SCPP-2734: FIX - (snom3xx,snom820) Possible phone freeze during use of Directory PUI.
(8.7.2.0) SCPP-3012: FIX - Don’t refresh Minibrowser if it’s waiting for a web response.
(8.7.2.0) SCPP-2417: Function key features: Bad xml response if clicking an URL button twice. Don’t fetch input URL if nothing was entered.
(8.7.2.0) SCPP-2590: (snom300, snom320, snom82x) Setting cmc_feature removed, now done by call_screen_fkeys_on_… settings.
(8.7.2.0) SCPP-2590: (snom300, snom320, snom82x) Setting deny_all_feature removed, now done by call_screen_fkeys_on_… settings.
(8.7.2.0) SCPP-2590: (snom82x) Setting show_line_info removed, now done by individual line_info_at_… settings.
(8.7.2.0) SCPP-2859: (snom300) Switching between headset and speaker is done differently now: when pressing short time, speaker key woks like normal speaker (no switching to headset) - long-press to speaker key will be treated as if the (not existend) headset key was pressed.
UC
(8.7.2.10) SCPP-2499: FIX - Microsoft OCS Directory Search: Error when hitting backspace.
(8.7.2.7) SCPP-3283: FIX - Microsoft Lync: PUI sign-in wizard does not perform register after entering credentials.
(8.7.2.9) SCPP-3313: FIX - Message LED won’t turn off and status information doesn’t blink.
(8.7.2.9) SCPP-3316: FIX - Call between TI Aries based IP Phones and snom300 from different pools causes snom300 to reboot.
(8.7.2.8) SCPP-3297: FIX - Backoff algorithm (retry_after_failed_register) timer does not reset after successful REGISTER. Reset random timer if register was successful.
(8.7.2.8) SCPP-3299: FIX - Incorrect (Voicemail) SIP URI listed in Call Lists.
(8.7.2.8) SCPP-3300: FIX - DUT crashes if connected to another domain.
(8.7.2.8) SCPP-3304: FIX - E.911 - Display-Info This is an emergency call is not shown when performing an emergency call.
(8.7.2.7) SCPP-3226: FIX - (snom300, snom320) Microsoft Lync: It’s impossible to set your own Presence state.
(8.7.2.7) SCPP-3287: FIX - Microsoft Lync: PUI’s Call History doesn’t display the Time.
(8.7.2.5) SCPP-2902: FIX - Microsoft Lync: Selecting Distribution Group causes phone freezing.
(8.7.2.5) SCPP-2999: FIX - Microsoft Lync: MCU disconnect after 7:27 min - if invited via SIP address (basic MS - CCCP).
(8.7.2.5) SCPP-3031: FIX - Microsoft Lync: MCU we send a BYE after 1:02 hour - if invited via SIP address (basic MS - CCCP).
(8.7.2.5) SCPP-3051: FIX - Microsoft OCS/Microsoft Lync: Long delay before phone rings.
(8.7.2.5) SCPP-3057: FIX - Microsoft OCS/Microsoft Lync: Failure to connect to TCP port of AV edge server puts ICE peer state machine into failed state.
(8.7.2.5) SCPP-3067: FIX - Microsoft Lync: CAC - no display warning call may take longer - in CAC network busy calls from snom to Tanjay, Aries or Lync Client.
(8.7.2.5) SCPP-3140: FIX - TCP reconnect back off. New default value set for retry failed register to 3,6:300.
(8.7.2.5) SCPP-3166: ADD - Microsoft Lync: Escalating a two-party call to a conference fails when invoked by Lync Attendant.
(8.7.2.5) SCPP-3216: FIX - Microsoft Lync: Cannot unlock phone keyboard by pressing OK. Set [Fkeys]] to ok, cancel for confirm keylock.
(8.7.2.5) SCPP-3269: FIX - Microsoft OCS/Microsoft Lync: Turning off DND should delete user state instead of setting it to available.
(8.7.2.0) SCPP-2820: FIX - Microsoft OCS: Media connectivity failure on load balanced AV edge servers.
(8.7.2.0) SCPP-2868: FIX - Microsoft OCS: Crash caused by Call Access Control (CAC).
(8.7.2.0) SCPP-2881: FIX - Microsoft OCS: Unsupported codec in SDP offer caused duplication of codec 0 in SDP response.
(8.7.2.0) SCPP-2907: FIX - Microsoft OCS: No audio when phone is in TCP only mode.
(8.7.2.0) SCPP-2908: FIX - Microsoft Lync: E.911 - Emergency calls cannot be dialed when phone is in locked state.
(8.7.2.0) SCPP-2933: FIX - Microsoft Lync: INVITE from conference server fails.
(8.7.2.0) SCPP-2794: ADD - UC edition supports the setting advertisement_url now as well, like all our other versions already do.
AUDIO
(8.7.2.8) SCPP-3289: UPD - G.722 is first in Codec list now - also for non UC versions.
(8.7.2.7) SCPP-2360: ADD - (snom720, snom760) Missing GSM codec
(8.7.2.2) SCPP-3194: FIX - SRTCP decryption error processing
(8.7.2.1) SCPP-526: FIX - (snom3xx, snom820) Bad audio quality when using G.726 because of wrong packing order.
(8.7.2.1) SCPP-3135: FIX - (snom720, snom760) Local DTMF echo always played out with maximum volume. Lowered volume now.
(8.7.2.1) SCPP-3136: FIX - Comfort Noise / Silence Supression not working. Codec cn is only valid for snom3xx, snom8xx, but not for snom7xx and snom MeetingPoint.
(8.7.2.0) SCPP-1424: FIX - (snom8xx) Auto Answer indication is inaudible. Now playing auto connect tone in full length.
(8.7.2.0) SCPP-1694: FIX - Blind Transfer: Missing dial tone after pressing transfer key.
(8.7.2.0) SCPP-2117: FIX - Missing busy tone.
(8.7.2.0) SCPP-2601: FIX - Play busy tone in terminated screen.
(8.7.2.0) SCPP-2742: FIX - Mixing dial tone and ring tone in ring tone menu if phone is off hook.
(8.7.2.0) SCPP-2746: FIX - Changing ringer volume doesn’t work properly.
(8.7.2.0) SCPP-2748: FIX - Call Completion: phone keeps playing busy tone the whole time during "Waiting". If no line is active stop playing synth sounds.
(8.7.2.0) SCPP-2751: FIX - phone plays busy tone after a transfer (Call Released Notification is off).
(8.7.2.0) SCPP-2854: FIX - Playing ringer on changing the volume doesn’t work properly.
(8.7.2.0) SCPP-2855: FIX - Playing ringer from setting menu doesn’t work properly.
(8.7.2.0) SCPP-2861: FIX - Incoming Intercom call cannot switch the audio-device unless it gets accepted.
(8.7.2.0) SCPP-2968: FIX - (snom720, snom760) USB Headset keys cannot control the phone.
(8.7.2.0) SCPP-1056: FIX - (snom3xx) If the option Silence Supression is enabled, the phone sends incorrect packets. Increasing sequence number on CNG packets and also add marker at the end of Comfort Noise.
(8.7.2.0) SCPP-2666: FIX - (snom_PA1) Always send RTP instead of SRTP.
(8.7.2.0) SCPP-2864: FIX - (snom3xx, snom820) En-/disable Comfort Noise depending on negotiated codecs with SDP offer/answers.
(8.7.2.0) SCPP-2951: FIX - RTCP counter information incorrect. Was wrong fraction lost counter due to overrun.


WUI,HTTP
(8.7.2.8) SCPP-3259: FIX - nickname is misspelled.
(8.7.2.2) SCPP-3186: FIX - Delete last Call History list entry or clear a list.
(8.7.2.0) SCPP-1831: FIX - Deleting whole Call History lists with activated hidden tags wasn’t working. Hidden tags are now ignored for local connections.
(8.7.2.0) SCPP-2295: FIX - (snom8xx, snomMP) Upload of WUI TAR archive doesn’t change WUI appearance.
(8.7.2.0) SCPP-2649: FIX - Dropdown menu for configuring soft keys in WUI needs revision. Now Mute is available for Line and Speed Dial keys only. Clear Pickup Info has been removed.
(8.7.2.0) SCPP-2936: FIX - Phone isn’t using absolute URI for 302 redirection (RFC 1945).
(8.7.2.0) SCPP-3023: FIX - Deleting singe Call History list entries not possible. Remove Call History entries on index webpage fixed.
(8.7.2.0) SCPP-2737: FIX - Phone does crash if downloaded file is too big.
(8.7.2.0) SCPP-2856: FIX - HTTP Client Authentication Digest not working. Use relative URI in authorization part.
(8.7.2.0) SCPP-3100: FIX - Don’t establish new HTTP Client connection if an older one is still in connecting state.
(8.7.2.0) SCPP-2117: FIX - Removed unnecessary option off_when_terminating_calls in menu under advanced>audio>release_sound.
(8.7.2.0) SCPP-2139: FIX - Setting apply_settings_timeout removed. Saving setting values changed via PUI to flash now always within a second, but setting values changed via WUI have to be applied manually before saved to flash.
(8.7.2.0) SCPP-2698: FIX - Setting auto_connect_type removed since it’s obsolete.
(8.7.2.0) SCPP-2720: FIX - Setting callpickup_dialoginfo removed, instead goto_monitor_state_on_line_activity is to be used.
(8.7.2.0) SCPP-2720: FIX - Setting show_xml_pickup removed since it’s obsolete.
(8.7.2.0) SCPP-2786: FIX - Setting redundant_fkeys replaced by disable_XYZ_soft_key_in_call settings. Available on all phones showing soft keys during call, except for snom MeetingPoint and snom8xx.
(8.7.2.0) FIX - Removed settings multicast_address and multicast_port, which are obsolete since 8.2.1.


SIP,RTP,SRTP,RTCP
(8.7.2.7) SCPP-2274: FIX - Min-Expire-Header not recognized (423 too brief). Automatically re-register once with the Min-Expires value.
(8.7.2.7) SCPP-3159: FIX - 180 Ringing instead 400 Bad Request error after Multiple Values in Single Value Required Fields
(8.7.2.7) SCPP-3231: FIX - Phone does not remove bindings correctly if rebooted. New setting sip_shutdown_timeout.
(8.7.2.5) SCPP-3203: FIX - After Receiving Call via CFW 181, DUT can not cancel call. Update callback_id on call forking to the final connection id.
(8.7.2.5) SCPP-3204: FIX - Phone did not play Bellcore tones.
(8.7.2.5) SCPP-3214: FIX - Reregister with Resource List Subscription via WUI Button was rebooting the phone.
(8.7.2.5) SCPP-3243: FIX - Failover not working. Default transaction timeout shortened from 32 to 8 seconds (sip_request_timeout, Broadsoft only).
(8.7.2.5) SCPP-3266: FIX - Set reciprocal_hold and refer_brackets to on if Server Type is Broadsoft.
(8.7.2.3) SCPP-3136: UPD - Silence Supression/Comfort Noise not working. Codec cn is only valid for snom3xx, snom820, but not for snom821, snom870, snom7xx and snom_MeetingPoint.
(8.7.2.2) SCPP-3152: FIX - Handle full dialog-info notify even if it is empty.
(8.7.2.1) SCPP-1853: FIX - Setting reject_calls_with_603 isn’t working.
(8.7.2.1) SCPP-3116: FIX - Codec CN is off by default.
(8.7.2.1) SCPP-3147: FIX - Phone answers empty SDPs with pcmu codec only regardless of what is defined in the codec lists. Now offering all codecs on incoming INVITE without SDP (late SDP).
(8.7.2.0) SCPP-830: FIX - If we send a CANCEL request, we have to wait for a 1xx-Response. Scheduling CANCEL if no response has been received yet.
(8.7.2.0) SCPP-1237: FIX - Attended transfer while ringing. Avoid CANCEL on transfering an outgoing ringing call (added new setting: attendend_transfer_on_ringing).
(8.7.2.0) SCPP-1820: FIX - Missing ACK for final response INVITE does not cancel the call. An missing ACK for 200OK responses will now release the call and a BYE will be send back.
(8.7.2.0) SCPP-1914: FIX - Corrected handling of non-SRTP-holds (we never use SRTP during hold) in SRTP-calls.
(8.7.2.0) SCPP-2215: DEL - Since phones can handle codecs dynamically, we removed the setting dtmf_payload_type in all phones except snomMP.
(8.7.2.0) SCPP-2475: FIX - Phones do not apply the signaling_tos parameter. Update signaling tos on udp if the setting changes.
(8.7.2.0) SCPP-2482: FIX - Problem with TCP DNS fail-over. On TCP/TLS check dirty host before connection attempt and packet routing.
(8.7.2.0) SCPP-2638: FIX - OCS: Phone does not retry connecting with an exponential back-off algorithm in case of network loss. Use now new setting retry_after_failed_register for random reregistering after reboot, ethernet replug or tcp reconnect. Value can be single integer value (range 1 to this value) or a range like 2,10.
(8.7.2.0) SCPP-2733: FIX - Improper retransmission timers for non-INVITE client transaction. Use Timer T2 for retransmissions in proceeding state on non-INVITE client transactions.
(8.7.2.0) SCPP-2816: FIX - INVITE retransmission interval too short and issue if T1 is too large.
(8.7.2.0) SCPP-2888: FIX - Premature release of a TCP candidate caused the phone to crash occasionally.
(8.7.2.0) SCPP-2953: FIX - REGISTER and INVITE network failures aren’t reported via PUI.
(8.7.2.0) SCPP-2955: FIX - DSCP value on SIP connections is wrong (not shifted).
(8.7.2.0) SCPP-3001: FIX - One way audio after attended transfer when transferor is snom760 and transferee has version 8.4. Now preventing unhold during transfer operation.
(8.7.2.0) SCPP-3002: FIX - No caller id update (transferee) on transferer. Inform PUI about a connection replacement to show correct display names (contact informations).
(8.7.2.0) SCPP-3008: FIX - Hold not working if holding party is anonymous. Set original tag in FROM header in case of an privacy call (anonymous).
(8.7.2.0) SCPP-3071: FIX - SIP message re-submits will not be stopped after server BYE. Skipping INVITE retransmissions (e.g. hold) on dialog teardown.
(8.7.2.0) SCPP-224: GRUU ID isn’t preserved between reboots. The ID is fix for the device now.
LLDP
(8.7.2.1) SCPP-3039: FIX - Memory leak on handling EAP success/failure responses.
(8.7.2.0) SCPP-2585: FIX - [[VLAN] ID over 255 was not working.
(8.7.2.0) SCPP-2595: FIX - Set VLAN ID and priority (QoS) settings delivered via LLDP.
TR69
(8.7.2.0) SCPP-2873: FIX - Phone reports too many setting changes to TR69 application. Don’t report automated temporary changes of outgoing identity.
UPLOAD
(8.7.2.0) SCPP-2578: FIX - (snom MeetingPoint) Branding isn’t supported.
(8.7.2.0) SCPP-3055: FIX - Fetching of upload files is failing if other provisioning requests failed before as well.

8.4.35 Bugfixes

PUI
SCPP-2732: Fixed: Attended transfer by pressing the transfer key twice is not working anymore (snom 300 only)
SCPP-3535: Fixed: Attended transfer on calling is inconsistend across devices
SCPP-3564: Fixed: Cannot create entry in internal address book
SIP
SCPP-3422: Fixed: Phone sends 180 Ringing too late, resolved by sending 100 Trying earlier
SCPP-3479: Fixed: Phone reboot on missing SDP m lines
SCPP-3549: Fixed: UPDATE-messages are answered with 500 Server internal error

8.4.34 Bugfixes

AUDIO
SCPP-3054: FIX - Audio: One-way-audio if different codecs from the SDP are being used (MP only)
SCPP-3391: FIX - DTMF stops audio (7xx only)
SCPP-2830: FIX - Multicast Paging: Can't switch between speaker/handset during an active multicast on the destination site
ACTION URL
SCPP-3286: FIX - Action URLs for onhook / offhook not always being sent (clear debounce timer for onhook if offhook was pressed)
PUI
SCPP-3317: FIX - Not registered identity not longer indicated on display (320)
SCPP-3247: FIX - Right navi key disabled within internal directory (320)
SCPP-3302: FIX - 370: If the display name of the callee is too long the name is cut off and doesn't scroll
SCPP-3310: FIX - Timezone shows ASCII code (snom 320 only)
SCPP-3326: FIX - Virtual Keys / Incoming calls matching wrong directory entries
SPYT-25: FIX - The phone handled too few Vision LEDs (4 on the 821 and 15 on the 870)
LDAP
SCPP-3397: FIX - ldap_max_hits > 127 causing LDAP lookup requests to fail with 'invalid size limit'
SIP
SCPP-1853: FIX - rejecting a call does not send additional "486 Busy Here"
SETTINGS
SCPP-3442: FIX - The configuration file for fkeys 'fkey.xml' can not be saved to flash since it is too big if the new XML feature is used. The limit is 75k now, it was 20k.

8.4.33 Bugfixes

AUDIO
SCPP-1312: FIX - SRTCP MAC check
SCPP-1424: FIX - (snom8xx) Auto answer indication is inaudible. Now playing auto-connect-tone in full length.
SCPP-1920: FIX - No more loosing audio when in a call with setting pickup_indication enabled. Setting pickup_indication will only work when there are no calls.
SCPP-2542: FIX - (snom821, snom870) DTMF tones not working while dialing.
SCPP-3098: FIX - (snom821, snom870) Holding reminder audio stuttered.
SCPP-3179: FIX - No audio after releasing from hold.
SCPP-3194: FIX - SRTCP decryption error processing
PUI
NONE: FIX - Light line-key (type: extension) after having picked up remote call with it.
SCPP-2912: FIX - Extension Monitoring (RFC4662): Incoming Calls on monitored extensions are not mapped correctly and pickup fails. Made pickup via subscription list work.
SCPP-3074: FIX - (snom8xx) BLF button event HOLD is not working. Line keys of type BUTTON may show on hold when corresponding button is reported to have color hold.
SCPP-1853: FIX - Setting reject_calls_with_603 isn’t working.
SCPP-2417: FIX - Function key features: Bad xml response if clicking an URL button twice. Don’t fetch input URL if nothing was entered.
SCPP-2687: FIX - XML dial plan does not behave as expected. Fixed single digit XML dial plan matches.
SCPP-2765: FIX - LEDs of Fkey type Callagent aren’t updated.
SCPP-2904: FIX - Mute LED does not light up when mute active. Update the LEDs after pressing mute key.
SCPP-2998: FIX - Preselection is dialed immediately when phone goes offhook. Don’t dial preselection immediately.
SCPP-3094: FIX - (snom370) Backlight dim function not longer available. Add active and idle backlight setting.
SCPP-3148: CHG - Adapt behaviour of un-holding first call like in v7.3. Allow line key events during outgoing calls.
LLDP
SCPP-2586: FIX - Advertise received dscp value if untagged.
SCPP-3039: FIX - Memory leak on handling EAP success/failure responses.
RTCP
SCPP-1335: FIX - Incorrect packet and octet count in RTCP Sender Report.
SCPP-2951: FIX - RTCP counter information incorrect. Was wrong fraction lost counter due to overrun.
RTP
SCPP-1056: FIX - (snom3xx) If the option silence supression is enabled, the phone sends incorrect packets. Increasing sequence number on CNG packets and also add marker at the end of comfort noise.
SETTINGS
SCPP-2139: FIX - Setting apply_settings_timeout removed. Saving setting values changed via PUI to flash now always within a second, but setting values changed via WUI have to be applied manually before saved to flash.
SIP
SCPP-2274: FIX - Min-Expire-Header not recognized (423 too brief). Automatically reregister once with the Min-Expires value.
SCPP-2953: FIX - REGISTER and INVITE network failures aren’t reported via PUI.
SCPP-2955: FIX - DSCP value on SIP connections is wrong (not shifted).
SCPP-3071: FIX - SIP message re-submits will not be stopped after server BYE. Skipping INVITE retransmissions (e.g. hold) on dialog teardown.
SCPP-3152: FIX - Handle full dialog-info notify even if it is empty.
SCPP-3214: FIX - Reregister with Ressourcelist Subscription via WUI Button was rebooting the phone.

8.4.32 Bugfixes

AUDIO
SCPP-2167: Fixed - (snom320, snom370) Echo problem - concerns phones with serial numbers starting CHNSZ only.
SCPP-2194: Fixed - Mute feature does not work for initial call when second call is ringing.
SCPP-2219: Fixed - G.723.1 codec support was broken in snom820, snom821, snom870
SCPP-2565: Fixed - Continue with next RTP seq-nr. when changing from being held to connected.
SCPP-2570: Fixed - (snom3xx) Multicast didn’t work after a call was received.
SCPP-2573: Fixed - Phone remained in speaker mode if you lift the handset after initiating the call in speaker mode.
CERTIFICATES
SCPP-NONE: Fixed - X.509 Version number shown on web interface of the phone was always 1 less (v2 ? v3).
SCPP-2548: Fixed - Some X.509 expired certificates were removed.
SCPP-2558: Fixed - Signature verification with X.509 certificates bigger 1024bit was’t working.
PUI
SCPP-754: Fixed - (snom320) DND/CFWD got blocked by missed calls display.
SCPP-2014: Fixed - Pressing a line key twice was not going to idle state.
SCPP-2202: Fixed - (snom870) The presence-publish screen did show artefacts sometimes.
SCPP-2234: Fixed - It was not show that a reboot is required after the webserver type (https, http, both) was changed.
SCPP-2258: Fixed - (snomMP) MP showed some scrolling error.
SCPP-2312: Fixed - The phone sent CallForwardingOff Action URL twice for the active identity.
SCPP-2377: Fixed - Shared line feature keys caused unrelated keys to light up.
SCPP-2468: Fixed - (snom820, snom821) Date and time were displayed even when setting "show_clock" was off.
SCPP-2515: Fixed - Phone got confused on incoming calls with more than one returned LDAP-result.
SCPP-2530: Fixed - Wireless Headset was not always working correctly. Sometimes the proper onhook was not sent to the headset.
SCPP-2540: Fixed - On a Reboot after loading a new PUI branding the identities were not unregistered.
SCPP-2563: Fixed - Phone got stuck if a non-existent leds was addressed using the minibrowser.
SCPP-2577: Fixed - Sometimes a wrong caller-id was shown when being transfered.
SCPP-2597: Fixed - Stutterkey didn’t displayed during entering passwords.
SCPP-2640: Fixed - Unhold showed problems for hold with challenge.
SCPP-2641: Fixed - Idle state did not correctly updates display after minibrowser was active.
SCPP-2644: Fixed - After a call was terminated the xml directory list was still displayed on the display.
SCPP-2672: Fixed - (snom820, snom821, snom870) Display backlight came up with a delay on incoming calls.
SCPP-2702: Fixed - On 3-shared line appearances an incoming call sometime made two LEDs illuminate.
SCPP-2755: Fixed - (snom820, snom821) Using the xml key definition for a line key, the line key showed the wrong color.
SCPP-2818: Fixed - Minibrowser input value reappeared while dialing.
NETWORK
SCPP-2756 Fixed - ARP table got sometimes cleared so that multicast addresses weren’t working properly. Affected: stp, lldp, 8021x, ip multicast on init_eth0, init_vlan.
LLDP
SCPP-2585 Fixed - LLDP - Problems if VLAN > 255
SETTINGS
SCPP-2295: Fixed - (snom820, snom821, snom870, snomMP) HTML-Branding could not be installed.
SCPP-2690: Fixed - Don’t reset settings before unregister when using the web interface for doing the reset.
SIP
SCPP-224: Fixed - The UUID used for GRUU did change between reboots sometimes. That leads to problems with some PBXs/Proxies.
SCPP-554: Fixed - stunned IP was not always inquired from stun-server before doing register.
SCPP-1752: Fixed - Conference with specifying the conference room number does not work (referring to conference room).
SCPP-2594: Fixed - Don’t deny incoming call if cwi is off and auto redial is active.
SCPP-2606: Fixed - CANCEL wasn’t sent when aborting call to new tranfer-destination.
SCPP-2626: Fixed - Send ringing every minute (if prack is not used).
SCPP-2647: Fixed - New sdp offers was not Rejected while a previous offer is still being processed.
SCPP-2652: Fixed - Do not process received sdp m lines with port set to zero.
SCPP-2671: Fixed - Memory leak on INVITEs with multipart MIME types.
SCPP-2738: Fixed - Unsupported was missing in 420 Bad Extension response.
SCPP-2760: Fixed - DTMF using SIP INFO "application/dtmf-relay" did not follow the IETF Draft draft-kaplan-dispatch-info-dtmf-package-00. SPACE was missing after EQUAL.
SCPP-2793: Fixed - Missing crypto key to sendonly sdp (hold), but only if user_moh is empty.
SCPP-2886: Fixed - Phone keeps asking for a password for an identity with an empty password even after the identity was removed.
SCPP-2891: Fixed - When receiving the "full" flag, the the old dialog state was not deleted completely.
TR-69
SCPP-1641: FIX - Phone got stuck sometimes if GetParmeterValues(Device.) was called
HTTP
SCPP-2564: Fixed - Default port 443 was not always used if no port was set and scheme https was used.
SCPP-2752: Fixed - The phone might get wrong cached data when it is using a http proxy with cache. "Cache-Control: no-cache\r\n" is set to avoid this to happen.

8.4.31 Bugfixes

PUI
SCPP-1250: Fixed :Dialplan freezes the phone with a rule like: <template match="11" timeout="1" scheme="sip" user="phone" rewrite="4711"/>;
SCPP-1250: Fixed :Rule is not expanded correctly: <template match="30*" timeout="1" scheme="sip" user="phone" rewrite=""/>;
SCPP-1874: Fixed :Name from LDAP lookup no longer displayed during a call
SCPP-2371: Fixed :CFNA (Call Forward No Answer) does not work under certain conditions
SCPP-2405: Fixed :Memory leak when using SnomIPPhoneImageFile
SETTINGS
SCPP-2522: Fixed :Provisioning multiple times via Settings refresh timer freezes phone, if web_language value isn't matching available web languages;
SIP
SCPP-2315: Fixed :Push to Talk / Intercom doesn't cancel when button is released / cancel pressed; Send provisional response for incoming intercom as well;
SCPP-2489: Fixed :Session Timer Reject 422 leads to invalid SDP connection info; Avoid empty SDP connection address after receiving 422 response
TR69
SCPP-2233 :Fixed: If a setting did not exist on the phone type the TR-069 would crash upon SPV on this setting; Special handling for upload_gui and upload_web

8.4.30 Bugfixes

SIP
SCPP-2133: Fixed :Avoid empty SDP Connection address after receiving an 302 response
SCPP-2482: Fixed :On tcp/tls check dirty host before connection attempt and packet routing

8.4.29 Bugfix

PUI
SCPP-2150: Fixed :OFFHOOK dials xml directory entries on 300
SCPP-2497: Fixed :Phone starts to dial when Minibrowser consumes speedkey;
SCPP-2394: Changed :Keep from sending too many ACKs to retransmitted 200OKs via new setting ack_repetition_idle_time;
TR69
SCPP-NONE: Added :New mechanism to fetch unmapped settings from phone;

8.4.28 Bugfix

AUDIO
SCPP-2079: Fixed :Ending audio in connected call when another incoming call cancels ringing;
PUI
SCPP-1665: Fixed :Forgot to challenge user after reboot when password is needed to register;
SCPP-2160: Fixed :'Conference' sign (soft key) is missing on snom821;
SCPP-2298: Fixed :When accepting incoming call, end any outgoing ringing call;
LLDP
SCPP-2308: Fixed :LLDP VLANs over VID 255 are not possible;
NTP
SCPP-2476: Fixed :'ntp_server' setting requires reboot;
WUI
SCPP-2420: Fixed :Write protected dkey keyevent settings won't be greyed out in web interface due to incorrect HTML coding;

8.4.27 Bugfixes

PUI
Fixed: (snom870) The dual-audio-button (Handset+Speaker) was replaced with the regular speaker-button, since it is not fully functional at the moment. (SCPP-2229)
Fixed: (snom870) Suppress ringtone during hold doesn’t work properly. (SCPP-2323)
Fixed: Phone lagged when flash plugin was turned on. We suggest to turn flash off because of the additional load. (SCPP-2336)
Fixed: Audio device turns from headset to speaker on second incoming call. (SCPP-2373)
Fixed: Deny incomming call in state call-completion with call_waiting=off and a call on hold. (SCPP-2392)
Fixed: Phone reboots immediately when identities aren’t registered. The phone does not observe the setting reboot_after_nr. (SCPP-2410)
Fixed: Phone reboots after provisioning was triggered via the settings refresh timer when a "reboot required" settings was changed. The phone did not observe the setting auto_reboot_on_setting_change in this scenario. (SCPP-2415)
Fixed: (snom320) Czech special chars are missing at display. (SCPP-2421)
LLDP
Fixed: LLDP advertisment for PORT ID subtype. (SCPP-2391)
Added: PUI VLAN reset also resets lldp settings (SCPP-2391)
NETWORK
Fixed: (snom3xx) The ethernet switch blocks IPv6 Router Advertisments to address 33:33:00:00:00:01. (SCPP-2346)
Fixed: (snom870, snom821) WebUI cannot be accessed by devices connected to PC switch port in some VLAN scenarios. (SCPP-2364)
UPDATE
Fixed: (snom8xx, snomMP) Software update is hanging in download progress bar due to slow networks or links going down. (SCPP-2412)
VPN
Fixed: Reset does not delete OpenVPN settings files. (SCPP-2334)
Fixed: (snomMP) VPN did not work properly. (SCPP-2244)
SIP
Changed: Changed - RTP Payload names are provided using captial letters now. (SCPP-2409)
WUI
Fixed: Setting file cannot be provisioned via HTTPS using chunked encoding. (SCPP-2344)
Fixed: (snom8xx, snomMP) Firmware update using URL with userinfo fails. (SCPP-2383)

8.4.26 Bugfixes

PUI
Fixed: Phone loads remote language files always during check-sync whether or not it’s specified in check-synced config. Now remote languages are loaded on check-sync if specified in config loaded via check-sync only. (SCPP-2255)
KERNEL
Fixed: (snom300,snom320,snom360,snomPA1) Packet fragmentation is done wrongly. (SCPP-1829, SCPP-1932)
SIP
Fixed: Media path and SDP answer with 2 m lines in the SDP offer if RTP/SAVP is mandatory. (SCPP-2304)
TLS
Fixed: A bug with DES encryption and padding leads to connection losses. (SCPP-2309)
WUI
Fixed: Uploading settings via WUI isn’t working anymore. (SCPP-2337)

8.4.25 Bugfixes

no bug fixes

8.4.24 Bugfix

AUDIO
Fixed: (snom320, snom370) Echo Cancellation isn’t working properly. (SCPP-2167)
Fixed: (snom820) The setting "Send silent RTP packets on mute" (allow_rtp_on_mute) has no effect. (SCPP-2055)
DHCP
Fixed: (snom821, snom870) DHCP request couldn’t be skipped by pressing CANCEL key.
PUI
Changed: (snom360) Don’t clear icons in ringing state if ringing animation is off. (SCPP-2171)
Changed: (snom870) Don’t show speedselect numbering for XML tag SnomIPPhoneText. (SCPP-2192)
Changed: Force repaint of state edit_number after key cancel event. (SCPP-2123)
Fixed: (snom370) Empty title in XML is making greyscale colors much darker on the display. (SCPP-1565)
Fixed: (snom8xx) Display is flickering after pressing keys in special substate of idle named virtual function keys. (SCPP-2106)
Fixed: (snom8xx) Virtual keys: Handle transfer and redirection in case of an incoming call, too. Stop ringing after sucessful forwarding. (SCPP-2105)
Fixed: (snomPA1) Reset button isn’t working.
Fixed: Canceling push2talk isn’t working after key release. (SCPP-2223)
Fixed: Canceling a call while fetching callinfo icons is in progress reboots the phone. (SCPP-2174)
Fixed: Endless loop using minibrowser fetch-tag if fetch returns no XML data. (SCPP-2165)
Fixed: Expansion Module isn’t detecting when huge boot-delay caused by setting max_boot_delay is enabled.
Fixed: Pressing redial after clearing the whole redial list reboots the phone. (SCPP-2183)
Fixed: Setting reboot_after_nr keeps the phone rebooting. (SCPP-2235)
Fixed: State multicast cannot be cancelled by CANCEL key (hard & soft). Configured multicast addresses are listed now. (SCPP-2153)
LDAP
Fixed: Show LDAP lookup depending on setting number_guessing and prioritise_pbx_number_lookup on outgoing calls. (SCPP-1874)
LLDP
Fixed: Not all TLV limits are used as written in the standard. Some switches are ignoring those LLDP messages.
Fixed: Each phone is now advertising its correct power consumption in TIA extended power TLV.
SIP
Changed: We set an internal limit of 50 characters for the Display name. (SCPP-2170)
Fixed: Caller ID Update via SIP INFO does not work as expected. From and to header out of an INFO message with content-type "message/sipfrag" will be parsed now correctly. (SCPP-635)
Fixed: Expansion Module/BLF makes phone delay, become unresponsive or slow. We added several SIP UDP performance enhancements for subscriptions. (SCPP-2026)
Fixed: Phone doesn’t send unregister before reset settings. Added new setting sip_shutdown_maxtimeout for waiting after SIP shutdown request (sending unregister/unsubscribe) before continuing system shutdown. (SCPP-1585)
Fixed: When the PBX tries to change the Display name, the phone just does not change it. In case of an request we now update the current "from" header with the one of the request message. (SCPP-1407)
TLS
Fixed: If certificate has too little elements the phone may get stuck. (SCPP-2091)
VLAN
Fixed: (snom821/snom870): VLAN port un-/tagging doesn’t work. (SCPP-2231)
Minibrowser
Fixed: Video feature not working in some environments. Now waiting for webserver connection close if an HTTP 200 OK contains no Content-Length header. (SCPP-2033)

8.4.23 Bugfixes

No bugfixes

8.4.22 Bugfixes

AUDIO
Fixed: (snom821, snom870) RTP timestamp was reset on outgoing packets at call start and speaker/handset changes. (SCPP-2097)
Fixed: (snom821, snom870) Fixed constant beep and one way audio in conference scenario.
DTMF
Fixed: (snom8xx, snomMP) Remote DTMF generation via ?key_dtmf= wasn’t working. (SCPP-1438)
Fixed: (snom8xx, snomMP) When using fkey option Speed Dial with a value like 505@my.proxy.com;dtmf=1234, the phone doesn’t send DTMF tones after call establishment. (SCPP-1493)
Fixed: OOB DTMF codes A-D and ! (hookflash) weren’t working. (SCPP-1982)
PUI
Fixed: (snom300, snom320) Cancelation of conference via on-hook didn’t work. Settings conf_hangup and cancel_conference are combined now on on-hook event. (SCPP-1928)
Fixed: (snom870) Incoming call while connected did disrupt audio of current call. (SCPP-1920)
Fixed: (snom870) CWI didn’t work properly when the phone is showing an input page. Now refreshing the call management list in case of incoming call. (SCPP-2079)
Fixed: Phone PUI language dialog couldn’t be exited by pressing CANCEL. (SCPP-2075)
Fixed: Old behaviour of speed select in XML based lists reintroduced again. Invented new maintag attribute speedselect which can be off, select or enter. (SCPP-2116)
Fixed: Support of server managed forwarding on PUI XML menu was broken. The setting was changed, but the change not reflected in the menu. (SCPP-2098)
LDAP
Fixed: LDAP lookup was overwriting callerID with wrong number value. (SCPP-2127)
Fixed: LDAP directory was conflicting with setting auto_dial. Thus we invented new setting auto_dial_ldap. Only if auto_dial and auto_dial_ldap is enabled, auto dial will be done in LDAP search, too. (SCPP-2112)
SIP
Fixed: ICMP Redirect message was ending call. (SCPP-2110)

8.4.21 Bugfixes

AUDIO
Fixed: (snom3xx) We were loosing audio when no RTP was received for a couple of minutes and the phone was muted. (SCPP-1985)
Fixed: (snom3xx) Volume couldn’t decreased enough. (SCPP-1977)
PUI
Changed: Now clearing all call lists when an user is logged off. (SCPP-2018)
Changed: (snom821, snom870) Due to ongoing issues with the dual audio button, we disabled the button for the time being. (SCPP-2082)
Fixed: Phone was leaving settings menu when changing outgoing identity. (SCPP-1988)
Fixed: (snom8xx) Phone couldn’t handle huge photos properly. (SCPP-2010)
Fixed: (snom870) Disabling Blind Transfer (setting disable_blind_transfer) had no effect on transfer soft key. (SCPP-2035)
Fixed: Remapped softkeys (settings dkey_fkeyX) were overwriting Minibrowser defined softkeys. Functionality is now effective in idle screen when minibrowser is not active only. (SCPP-2076)
Fixed: (snom870) When dialing a number from the detailed contact view, the call starts using the handset instead of the casing speaker. (SCPP-2081)
Fixed: (snom300) Slovanian characters were not displayed properly.
Fixed: (snomPA1) Pin control wasn’t working.
Fixed: (snomPA1DP) Keyboard wasn’t working.
LANGUAGE
Changed: The language index value for Slovenian has been changed to SI and Slovencina is SK again.
SIP
Fixed: Call had been disconnected if hold request has been rejected. (SCPP-2087)
UPDATE
Fixed: Phone was sometimes not starting the SW Update even when it was in state idle.

8.4.20 Bugfix

PUI
CHANGED: Setting action_received_subscr_notify_url now discards repeated same notifies for better performance.
FIXED: Action URLs were causing a state change when current state uses minibrowser. (SCPP-2005)
FIXED: (snom300, snom320) Phone wasn’t showing display name (realname) in state idle. (SCPP-1991)
FIXED: Phone wasn’t showing local line index for LDAP lookup of incoming calls. (SCPP-1880)
FIXED: (snom360) Status line was sometimes showing overlapped text. (SCPP-1990)
FIXED: Phone was leaving settings menu when changing outgoing identity. (SCPP-1988)
Fixed: Fkey labels were not reset after exiting minibrowser. (SCPP-2009)
Fixed: The setting block_url_dialing no longer inhibits calling numbers that contain * or #.
LDAP
CHANGED: If predict_text is enabled, only the first six characters will be used for the LDAP lookup to avoid system overload. (SCPP-1996)
FIXED: Stutter keys were not shown during editing the search string. (SCPP-2004)
OCS
FIXED: Phone was sometimes rebooting/freezing when updating contact names.
VPN
CHANGED: Version of openvpn client updated to 2.1.2.

8.4.19 Bugfix

AUDIO
Fixed: (snom820, snom821) Knocking for 2nd incoming call while connected with 1st call wasn’t working properly. (SCPP-1962)
Fixed: Auto connect indication while using headset wasn’t working properly. (SCPP-1956)
PUI
Fixed: (snom300, snom320) It wasn’t possible to dial the first entry when entering internal directory followed by offhook. (SCPP-1901)
Fixed: (snom370) Device wasn’t showing record indication in state conference. (SCPP-1957)
Fixed: It wasn’t possible to escape the password inquiry when user tried to abort reset values in PUI settings menu. (SCPP-1971)
Fixed: Device was accepting wrongly line key events in state calling. (SCPP-1975)
Fixed: In state transfer the phone was changing wrongly the state after posting an action URL. (SCPP-1980)
Fixed: Phone was staying forever in state calling when an outgoing INVITE receives no response at all. (SCPP-1944)
Fixed: Parsing a non XML document with minibrowser could lead to an endless loop. (SCPP-1952)
Fixed: Device wasn’t handling line state on hold correctly when the corresponding line key was pressed. (SCPP-1849)
Fixed: (snom820, snom821) While device was in state connected an incoming call was knocking instead of ringing. (SCPP-1920)
Fixed: (snom300, snom320) Password editing was revealing set password. (SCPP-1930)
Fixed: Device wasn’t using full SIP URI for dialing out of call lists, when username isn’t numeric. (SCPP-1963)
Changed: (snom300, snom320) Only URI without timestamp is shown in call list, when it exceeds display width. (SCPP-1939)
Changed: Don’t use feature of opening local directory record in state holding. (SCPP-1897)
SETTINGS
Fixed: (snomPA1, snomPA1DP) Device was losing volume setting.
SIP
Fixed: Wasn’t using rport parameter in VIA when only the port has changed. (SCPP-1987)
UPDATE
Fixed: (snom821, snom870, snomVision, snomMP) Software Update using HTTPS scheme was not working. (SCPP-1966)
WEB
Fixed: Device was wrongly asking for credentials during logout instead of during login process. (SCPP-1655)
Fixed: Some query strings in the web interface were missing a hidden tag. (SCPP-1831)
Fixed: The setting block_url_dialing wasn’t working while using a webUI page to dial. (SCPP-1666)

8.4.18 Bugfix

AUDIO
Fixed: (snom870, snom821) Phones experienced occasional audio loss after CWI in PSTN calls. (SCPP-1912)
Fixed: (snom3xx) Phones had poor handsfree performance. Tuned handsfree mode with new audio coefficients.
PUI
Fixed: GUI wasn’t updating caller name when was changed through sip UPDATE message. (SCPP-1925)
Fixed: Calling conference server wasn’t working for all hard keys. (SCPP-1752)
Fixed: Canceling call forward while entering target wasn’t working properly. (SCPP-1906).
Fixed: (snom300) Canceling OCS call forward was different to other phone types. (SCPP-1916)
Fixed: Reset values called out of phone GUI wasn’t working. (SCPP-1915)
Fixed: Provisioning of internal directory wasn’t working properly. (SCPP-1923)
Fixed: When redirection after timeout got enabled, sending starcode wasn’t working. (SCPP-1935)
Fixed: (snom300, snom320) Password parts became visible when backspace key was pressed during editing. (SCPP-1930)
HEADSET
Fixed: Wireless Enhanced Headset (EHS) wasn’t working with old adapter box anymore. (SCPP-1864)
SIP
Fixed: Missing ACK for 487 cancel after long time ringing. (SCPP-1913)
Fixed: Metaswitch special RFC3264 handling needs setting sdp_version_check under Advanced→SIP→sdp version check disabled. (SCCP-1911)
Fixed: Phone wasn’t reregistering when it was ringing in parallel. (SCPP-1938)
Fixed: Phone got confused by comments in XML dialplan. (SCPP-1784).
TR-69
Changed: Filetype notation changed to X 000413 ParameterMap. Upload of param map implemented. (SCPP-1825)
UPDATE
Fixed: (snom8xx, snomMP) A regular software update using TFTP was sometimes aborted after 300 seconds.
WEB
Fixed: The texts regarding CLIP and CLIR at the prefs WUI page were wrong. (SCPP-1926)
Fixed: (snomMP) VLAN options ID and QOS weren’t shown at WUI page. (SCPP-1892)

8.4.17 Bugfix

AUDIO
Fixed: It was possible to generate very short dtmf tones, now they take at least 80 ms. (SCPP-1878)
Fixed: (snom870, snom821) An initial clipping of audio happened sometimes under certain scenarios
PUI
Changed: Handling of forward all for all programable keys unified. (SCPP-1811)
Changed: Immediatly save all settings upon logoff-all. (SCPP-1889)
Changed: (snomMP) XML IF tag handling updated to fix GUI problems. (SCPP-1828)
Changed: (snom300, snom320) Also show a forwarding hint even if identity depended forwarding is active. (SCPP-1817)
Fixed: If the hold key or line key was pressed to fast the phone sometimes mixed up the call states. (SCPP-1809).
Fixed: It wasn’t possible to dial an entry in a LDAP result set using the speaker key. (SCPP-1888)
Fixed: (snom3xx) 8.4.16 introduced a bug so that expansion modules and wireless headsets weren’t working. (SCPP-1871).
Fixed: XML Minibrowser based Alert messages weren’t always shown correctly, e.g. a failed transfer didn’t show the error message. (SCPP-1788)
Fixed: It was sometimes not possible to select an entry in a list (menu) when the list had more than 9 entries. (SCPP-1891)
Fixed: (snom8XX) Intercom wasn’t working properly when the idle screen was set to or showing the virtual keys. (SCPP-1832)
Fixed: It wasn’t possible to choose a number from the directory/LDAP out of the pool for transfer. (SCPP-1169)
Fixed: Auto dial wasn’t working when an entry of an LDAP result set was selected.
SETTINGS
Fixed: A "value=" somewhere in one of the settings lead to a read error under certain scenarios.
SIP
Fixed: Close call on missing ACK for final invite response. (SCPP-1819)
Fixed: Inhibiting rapid hold/unholds combinations to send 2nd invite before 1st one was answered. (SCPP-1809)
Fixed: VQReports weren’t always send directly to the collector. (SCPP-1884)
Fixed: Phone did’nt evaluate all call-info headers. (SCPP-1359)
TR-69
Fixed: Received settings weren’t saved to the flash immediately.
Changed: Handle pending informs to avoid multiple sessions. (SCPP-1827)
Changed: The ID of the upload envelope is no longer set statically to 100. (SCPP-1827)
WEB
Changed: The Action URL receiving Attended Transfer was renamed to received SIP INVITE to reflect its true meaning. (SCPP-1749)

8.4.16 Bugfix

PUI
Some menus were not showing proper entries, because XML compare for IF condition wasn’t working properly.
XML BROWSER
New main-tag attribute persistent lets the XML survive state changes. (SCPP-1807)
SIP
Do not alternate SDP body/version on incoming requests without SDP change. (SCPP-1805)
Inhibiting rapid hold/unholds combinations to send 2nd invite before 1st one was answered (SCPP-1809)

8.4.15 Bugfix

AUDIO
Fixed initial loudness on boot up when multicast was already streaming (snomPA1, snomPA1DP). (SCPP-1151)
ETH
PC Switch port was switched off when auto negotiation was selected. Fixed speed selection was working (snom3xx).
PUI
Disabled touch-buttons can’t be pressed anymore (snom870). (SCPP-1753)
Support-key works from within virtual pkey overview (snom820, snom821, snom870). (SCPP-1542)
Added softkey ok to confirm dialogs (snom320). (SCPP-1762)
Wireless Enhanced Headset was sometimes not in the correct state. (SCPP-1764)
Aborted transfer reconnect to previous call. (SCPP-1645)
Save webclient credentials in settings after challenge. (SCPP-1728)
Show correct time in call lists details (snom320). (SCPP-1761)
Refresh OCS presence in clock key state. (SCPP-1793)
Refresh OCS presence in virtual key state. (SCPP-1792)
CANCEL call on second press of the button (snomPA1DP).
Softkey OK will work in LDAP search. After key Backspace duplicate entries are removed. (SCPP-1783)
SIP
Fixed - No multicast after a sip call with srtp (snomPA1, snomPA1DP) .
Auto reconnect after transfer failure is optional now: added new setting sip_reconnect_on_rejected_refer. Shows an error message on failure. (SCPP-1776)
WEB
Support page shows informations about a possible core dump file (snom8xx). (SCPP-1687)

8.4.14 Bugfix

AUDIO
Conference mic mute fixed (snom870, snom821).
PUI
Cancelation of showing pickup dialog when monitoring multiple calls has been fixed. (SCPP-1729)
Pkeys described through XML can now be used in state transfer when choosing the target for a blind transfer.
SIP
Stick to the same SDP media offer on RFC 4028 timer based Reinvite. (SCPP-1751)

8.4.13 Bugfix

No Bugfixes

8.4.11 Bugfix

PUI
Fixed: Retry Setting server with HTTP instead of HTTPS.
New setting number_simultaneous_calls sets the limit of maximum number of simultaneous calls. (SCPP-1701)
OCS call forward works now (snom870). (SCPP-1653)
Outgoing id and active line will be set to a valid value if the current value is obsolete. (SCPP-1702)
Softkey handling fixed (snomMP). (SCPP-1637)
XML SnomIPPhoneDirectory will work on 300/320 now. (SCPP-1716)
FKEY
Fixed phone freeze on invalid button index from LED control. (SCPP-1675)
SETTINGS
Copy defaults.xml onto config.xml during factory reset in order to give even the LID access to it. (SCPP-1709)
SIP
Added annexb=no for g729 in SDP.
TR-111
Was not working. (snomMP)

8.4.11 Bugfix

PUI
Fixed: Retry Setting server with HTTP instead of HTTPS.
New setting number_simultaneous_calls sets the limit of maximum number of simultaneous calls. (SCPP-1701)
OCS call forward works now (snom870). (SCPP-1653)
Outgoing id and active line will be set to a valid value if the current value is obsolete. (SCPP-1702)
Softkey handling fixed (snomMP). (SCPP-1637)
XML SnomIPPhoneDirectory will work on 300/320 now. (SCPP-1716)
FKEY
Fixed phone freeze on invalid button index from LED control. (SCPP-1675)
SETTINGS
Copy defaults.xml onto config.xml during factory reset in order to give even the LID access to it. (SCPP-1709)
SIP
Added annexb=no for g729 in SDP.
TR-111
Was not working. (snomMP)

8.4.10 Bugfix

AUDIO
Fixed continuous DTMF problem when call was made with handset onhook (snom821, snom870).
Fixed one way audio problem in OCS conference (snom821, snom870). (SCPP-1654)
PUI
First found LDAP result from list wasn’t dialable (snom870). (SCPP-1623)
Pressing CANCEL (→F_ABORT) for a couple of seconds, will show system info out of initial GUI wizard menu. (SCPP-1652)
The setting disable_speaker works now. If the setting is enabled, the handset will be used for audio instead of the casing speaker. (SCPP-1628)
WEB
Fixed WUI access without credentials. (SCPP-1590)

8.4.9 Bugfix

AUDIO
Out of Band DTMF mechanism was improved for better detection of DTMF in remote IVR systems.
PUI
Abort (long pressed CANCEL) possible if phone asks for DHCP or IP-address. (SCPP-1586)
Call lists setup will be done with correct parameters. (SCPP-1612)
XML decoding for display names. (SCPP-1555)
Show contact details for the selected item. (SCPP-1635)
SIP
While sending feature codes (DND), calls got stuck. (SCPP-1573)
OPTIONS are accepted in a call now as well. (SCPP-1624)
(OCS) Disable ICE when no MRAS is configured.
(OCS) Ignore incoming ICE candidates when ICE is disabled.;TLS:Trust secure localhost connections by default.
TR-69
Fixed some more issues regarding Policy Chaining.
WEB
Added setting rtcp_xr to Advanced SIP WUI page.

8.4.8 Bugfix

AUDIO
(OCS) Fixed (OCS) audio loss problem after unhold (when the call was on for a long time).
PUI
Fixed Memory Leak in creation of data for the state_of_gui page. (SCPP-1626)
Memory leak with XML-menus. (SCPP-1613)
Traverse buddy list positioning fixed. XML encoding added. (SCPP-1594)
SIP
(OCS) Add ms-referee-uri param to Referred-By. (SCPP-1592)
(OCS) In case of a failed subscription the retry must use the original uri and not the uri out of the contact header. (SCPP-1591)

8.4.7 Bugfix

DNS
Faster dns failure detection and lookup (SCPP-1599)
RTCP
Fixed wrong ssrc from snomMP on RTCP Packets during Hold (SCPP-1611)
SIP
Fixed snomMP one way in a conference (OCS only) (SCPP-1536)

8.4.6 Bugfix

AUDIO
Added RTCP-XR Report, VQSessionReports, Registration Metrics (SCPP-1596)
PUI
New setting stutter_timeout defines the time gap between two stutter key press. (SCPP-1597)
Edit numbers out of call lists fixed on twoline displays. (SCPP-1602)
Preselection fixed after sorting listbox entries (Preferences) on 360. (SCPP-1481)
SIP
Messages after 70 seconds of ringing had not been acknowledged (SCPP-1598)
Added failover handling on certain SIP Responses
Added request timeout option;TLS:Allow to add and delete certs even if hidden tags are enabled
Disable TLS Server authentication when resetting the phone
TR-69
Invalid Policy Chaining implementation. Could cause some send_inform issues as well.
WEB
Web client requests may stay open in an authorization scenario (SCPP-1556)

8.4.5 Bugfix

WEBCLIENT
Force to send TR69 Requests no matter if the webclient waits for authentication credentials.

8.4.4 Bugfix

SIP
Fixed request timeout and failover handling for TCP/TLS.
Correct handling of rport param in VIA header. (SCPP-1398)
TFTP
Use only hostname for DNS query. (SCPP-1572)
UPDATE
VPN files were not properly transfered during update.

8.4.3 Bugfix

AUDIO
Added new setting auto_connect_indication_tone for customer defined values. (SCPP-1517)
Fixed inband DTMF (snomMP). (SCPP-1445)
Fixed RTP packet transmit counting. (SCPP-1337)
CSTA
Action URL must set the CSTA id in case of clearing a line. (SCPP-1488)
Disabled Flexor security token. Web authentication must work for CSTA as well. (SCPP-1559)
PUI
Fixed showing rx/tx packets during call enabled by pressing ? key (snom370). (SCPP-1473)
Clear display before displaying call stats (snom360). (SCPP-1473)
Touch redirect asks for a target if no target was set before (snom870). (SCPP-1483)
Enabled BLF and SPEED key behaviour even if second call comes in, when setting redirect_ringing is off. (SCPP-1503)
Disabled monitor key calls (snom320). It’s meant for graphical displays only. (SCPP-1561)
Don’t allow pressing softkeys if keyboard is locked (snom370, snom8xx). (SCPP-1487)
Fire action URL log off/on for every un-/register. New action variables added: context_url and reregister. (SCPP-1539)
Fixed going to conference after disconnecting a third single connection. (SCPP-1562)
Fixed wrong-colored pixels when loading external images (snom870). (SCPP-1544)
Fixed broken redial after doing a transfer. (SCPP-1553)
Fixed erraticly broken redial.
Force redraw for list elements in minibrowser (snom870). (SCPP-1469)
Added new setting logoff_all_no_confirm to disable logoff all confirmation dialog. (SCPP-1384)
Pressing blinking line key (of a second incoming call) in state edit number now connects the call. (SCPP-1563)
Pressing a line key leaves the conference now. (SCPP-1571)
Redirect for one identity but more than one target is possible now. (SCPP-1502)
Port used in URLs matches the scheme now (http - 80, http - 443). (SCPP-1551)
Setting block_url_dialing works now (snom300). (SCPP-1560)
Show incoming call identity on display (snom300, snom320). (SCPP-1568)
Show mute icon in state conference (snom370). (SCPP-1482)
Transfer (deflection) is allowed even if keyboard is locked. (SCPP-1487)
Transfer on hangup is also done now by pressing onhook button of wireless headset. (SCPP-1472)
LDAP
Incoming call query is done now even if number begins with country code. (SCPP-1547)
Query only when letter is entered completely. (SCPP-1454)
LID
Fixed buffer overflow protection. (SCPP-1545)
XML BROWSER
Speedkey handling fixed. (SCPP-1557)
Unused or redundant key defines removed. (SCPP-1498)
SIP
Fixed OCS Account Data Wizard issue. (SCPP-731)
UPDATE
Fixed URL parsing when port was given in URL (snom820, snom870, snomMP). (SCPP-1518)
WEBCLIENT
Do not cut HTTP Content-Length header if the atachment is empty.
Stop dangling web client request after timeout and allow just 64 open requests in parallel.
XCAP
Minimize polling of directory after failure due to to huge remote directory.
Reject directories that don’t fit the phone.

8.4.2 Bugfix

AUDIO
Knocking sound works now (snom870). (SCPP-1468)
Suppress DMTF during call deflection (snom870). (SCPP-1459)
CSTA
Empty callingDevice will use the current active line now. (SCPP-1427)
DIRECTORY
Fixed provisioning. (SCPP-1391)
Huge file uploads with watchdog enabled no longer restart the phone. (SCPP-1409)
PUI
Fixed a bug that added ghost characters behind the cursor when edited string contained several special characters (snom320).
Hebrew was not working in big font as well (snom370).
Fixed favorites title (snom870). (SCPP-1420)
Only every second OFFHOOK will change to edit number state if special idle screen is set (snom870). (SCPP-1393)
Fixed capital special character spacing. (SCPP-1436)
Language file retrieved via provisioning, wasn’t saved at flash fs anymore.
Making ONHOOK count when in virtual key state and wanting to cancel own outgoing call. (SCPP-1433)
Minibrowser text and menu rendering wasn’t working on twoline displays (snom300, snom320). (SCPP-1461)
Added new setting transfer_on_hangup_non_pots to have no POTS behaviour for using transfer on hangup. (SCPP-1451)
Setting dim_timer is available for all phones except snom360 now.
The outgoing identity will be changed if an identity is removed via menu and it was selected as the current ougoing line. (SCPP-1450)
Fixed error shown on minibrowser triggered settings save. (SCPP-1456)
Fixed case if XML menu is empty. (SCPP-1464)
Fetch an URL if set in SoftkeyItem tag. (SCPP-1478)
Up-/Down key will work in minibrowser as well (snom300, snom320). (SCPP-1477)
LID
DTMF tone duration increased for easy detection (snom870).
PROVISIONING
Increased provisioning retry counter from 1 to 5.
SETTINGS
Reregister failed if line settings were changed via provisioning. (SCPP-1462)
SIP
Don’t show anonymous if Privacy=id but P-Asserted-Identity is set. (SCPP-585)
Fixed negative expire timers after reregister and other subscription bugs. (SCPP-1430)
Added new setting sdp_version_check used for switching the DSP version check. (SCPP-1429)
No longer ignoring contact-field in subscription notifies. (SCPP-1431)
UPDATE
Create correct encoded proxy update URL (snom820, snom870, snomMP). (SCPP-1397)
Fixed auto-reboot on new firmware when idle state is not springboard (snom870). (SCPP-1434)
VLAN
Made sure that ethernet port VLAN un-/tagging is initialized once in bootloader and stays like it during the whole system is starting up. This is important for an PC connected to the 2nd switch port (PC port) in order to not disturb the network connection during the phone starts (snom300, snom320, snom360, snom370). Is available with u-Boot version 1.1.3-v.

8.4.1 Bugfix

AUDIO
Audio tuning for better quality (snom870).
If setting offhook_dial_prompt is off, speaker key is fixed in idle mode after off-/onhook. (SCPP-1371)
Fixed headset from ringing only once per incoming call to now every 3 seconds. (SCPP-416).
Going OFFHOOK with wireless headset will use preselection like handset. (SCPP-248)
Fixed Multicast feature (snom820, snom870). (SCPP-1075)
Added new setting mc_output_device to play PA media via speaker or headset. (SCPP-1264)
Switch to speaker after ONHOOK in states edit number or connected. (SCPP-988)
Fixed Auto Answer Indication (snomMP). (SCPP-1026)
Fixed multicast streaming (snomMP). (SCPP-1185)
Restore original media stream if REFER initiated INVITE failed. (SCPP-1288)
Fixed phone ringer silence on subsequent calls after using a non G.711 codec in a call (snom3xx).
Fixed OCS conference audio distortion (snom820). (SCPP-1373)
Fixed fluctuating ringer volume (snom870). (SCPP-1385)
DTMF send improvements (snomMP). (SCPP-1273)
When going to idle state, ONHOOK command is now send to headset as well. (SCPP-432)
WIFI
Added WIFI ethernet bridge, use your phone as a wifi client ethernet bridge (snom820, snom870).
Wifi Bridge feature is disabled by default to avoid unexpected interconnection between a different wired network and a wifi network.
CSTA
CSTA Response had an invalid syntax and generated warnings in XML DOM Parser. (SCPP-1370)
DFKS
DFKS Ring Count was limited to 21 as the broadsoft server refuses higher values. The limit is now only considered if broadsoft server type support is selected.
DHCP
Fixed handling of huge and infinitive lease times. (SCPP-1173)
DIALPLAN
Apply dial plan when dialing missed or received records that only consist out of an URL (without display name). (SCPP-1284)
DNS
Retry DNS resolving several times also during provisioning. (SCPP-1316)
DTMF
DTMF keytones while dialing were not working on snom8xx. Now they are working at least in handsfree mode. Currently, we cannot support playing them in speaker mode as well (SCPP-1159).
VOLUME down key interfered with a 1633 Hz DTMF tone.
Fixed inband DTMF (snom820). (SCPP-928)
PUI
Conference button was not correctly toggling conference on and off. (SCPP-1352)
Don’t cover wrong time and date anymore when NTP failed. Show system time in every case. (SCPP-1380)
Softkey transfer has same behaviour as transfer key. (SCPP-1394)
Added missing call release notification when a call had been terminated. Now release_sound distinguishes between on, off and off_when_terminating_calls. Replaced radio button with drop down on the webUI. (SCPP-1006)
Don’t dial last LDAP result if number has changed and no LDAP result was found (snom300, snom320). (SCPP-1120)
Fixed sticky photo bug (snom370). (SCPP-286)
Keys that used to work in idle state now work the same way in idle replacement state (snom870). (SCPP-1374)
On block_url_dialing enabled edit-mode button needs to be disabled (snom870).
Traitening edit modes: default numeric for dialing numbers and alpha for LDAP (snom870).
Removed memory leak when loading remote images (snom820, snom870). (SCPP-839)
Fixed transparency handling for idle-xml images (snom820, snom870).
Virtual key state now correctly colors keys defined as buttons (activity and pickup color) (snom820, snom870). (SCPP-804)
Virtual key state and 820-side-screen now use received labels for those keys defined as buttons (snom820, snom870). (SCPP-804)
Accept dial softkey even if the dial list has more then one entry. (SCPP-1390)
Accept incoming calls with line keys in state conference. (SCPP-1131)
Accept transfer key in state transfer. (SCPP-798)
Add URI to calling lists even if registrar contains parameter. (SCPP-1039)
After attended transfer display shows connected state instead of on hold state. (SCPP-1272)
Call forwarding set for a local identity will work with Asterisk now. (SCPP-1278)
Changed timezone for Korea from +8 to +9. (SCPP-1260)
Clean paint area for title (snom370). (SCPP-1191)
Close call stats dialog if call is incoming. No call stats shown in state conference. (SCPP-1105)
Configured function keys work now in every state, if not setup as Key Event. (SCPP-931)
Deletion of single sub-numbers of multi-number tbook record now possible. (SCPP-1192)
Don’t handle key event LOGOFF_ALL if a line is connected or on hold. (SCPP-1203)
Don’t process backspace if edit type is enum (sort options). (SCPP-1251)
Don’t send ring command if phone is already ringing. Even if there are more then one incoming calls. (SCPP-972)
Edit state fixed. Scrolling to left is possible now (snom320). (SCPP-1267)
Exit minibrowser when XML contains nothing useful to display. (SCPP-892)
Format date depends on length of the year (09 or 2009). (SCPP-1287)
Function Key LED’s did not work correctly with multiple Forward destinations. (SCPP-1348)
Handle the programmable keys in state settings as well. (SCPP-293)
Handle transfer hard key in state calling as well. (SCPP-1237)
Help page pointing to webUI now uses correct URL scheme and adds even the port if it differs from 80 (SCPP-1305).
When keyboard lock is on, reset number if a digit is entered that do not match to any emergeny number. (SCPP-1253)
When setting contrast via dummy webUI page, the contrast was not applied to the display. (SCPP-1377)
Indicate new voice-message via message-LED even during calls.
Long numbers fit now into display (snom360). (SCPP-843)
Navikeys actived for selecting entry out of LDAP search results in state edit numbers (snomMP). (SCPP-1145)
Digit input in idle state fixed. It’s possible to enter numbers or select an entry out of the add-menu with speeddial (snomMP). (SCPP-1216)
MWI changes to normal dialtone independently of GUI state. (SCPP-510)
Made directory details for call partner accessible in ringing and calling screens (press directory button). (SCPP-1310)
New handling for incoming calls during conference (snomMP). (SCPP-753)
Added new setting transfer_on_hangup_with_starcode to allow transfering calls on hangup if one call was picked up with PBX starcode. (SCPP-906)
Added new setting dialnumber_us_format to switch off the U.S. dialnumber format. (SCPP-620)
No blinking status line if MWI is on (mailbox message received). State MWI is now matching snomMP style. (SCPP-1027)
OCS: Contact list groups could not be switched (snomMP).(SCPP-1035)
Playing ringer on login page fixed. (SCPP-1386)
Fixed playing "Internal Ringer" set by preferences webpage if alert-info is set. (SCPP-1058)
Fixed playing ringer of current line from webUI. (SCPP-1019)
Pressing CANCEL key during number guessing will display the current input (snom300, snom320). (SCPP-1338)
Pressing Record+Voice key in conference state terminates the recording line. (SCPP-1220)
Changed CANCEL key behaviour when user is asked whether he wants to use DHCP or not. Instead of switching DHCP off, the user is jumping back to the main settings menu. (SCPP-1181)
Refresh display after changing setting "Text Only Display on Soft Keys". (SCPP-1301)
Refresh fkeys in idle XML screen. (SCPP-1280)
Refresh idle screen if idle XML url has changed. (SCPP-936)
Reset fkey setting for removed identity. (SCPP-442)
Send busy if CWI is off but not generally, if phone is in state conference. (SCPP-1276)
Setting Use Speaker Key to Receive Calls is valid for headset key too now. (SCPP-1154)
Show holding or held-by members in conference. (SCPP-1103)
Show call duration time (snom300, snom320). (SCPP-1138)
Corrected on screen positioning of SMS messages. (SCPP-557)
Show cursor in LDAP only during editing search string. (SCPP-670)
Transfer in state conference handled like in state connected. (SCPP-872)
Use solid background for softkeys if setting "Text Only Display on Soft Keys" is enabled. (SCPP-871)
Virtual key name lookup is working with full URIs. (SCPP-1094)
Added dimming timer (snom820). (SCPP-332)
OCS states now available for fkeys (in virtual key-view and 820 side screen). (SCPP-1177)
Phone crashed when one tries to pick up a second call with the speaker button.
Text scrolling wasn’t working properly (snom370). (SCPP-1060)
HTTP
Not accepting content that is so huge that it could crash the phone. (SCPP-891)
KERNEL
Solved cold boot/hang problem for snom3xx series. Cold boot may last now up to 4 minutes (worst case).
KEYS
Only subscribe to those keys, that are available (ignore subscriptions for keys on extension keypads that are not plugged in). (SCPP-716)
LDAP
Fixing first-digit LDAP lookup. (SCPP-1041)
If no LDAP result entry was selected and dialing is started, phone shows enter number prompt. (SCPP-1306)
LED
Fixed indexing of buttons. (SCPP-804)
LID
Improved performance on high network load. (SCPP-1228)
RTCP
BYE is now encrypted if in SRTCP. Also fixed BYE length. (SCPP-1333)
Fixed RTCP in conference mode (including SRTCP). (SCPP-1311)
SETTINGS
If the provisioning location was specified without scheme, skip the generated HTTP urls if one of the generated TFTP urls were successful. (SCPP-1008)
It is not possible anymore to provision the setting firmware_version. (SCPP-845)
Make reregister after check-sync if necessary. (SCPP-985)
Removed G.723 codec from default initialization (snom820 OCS edition).
Made sure that the setting value of ntp_refresh_timer is set between 60 seconds and max signed int, which is around 9 hours.
Setting time_24_format defaults to on now. (SCPP-1343)
SIP
Inband DTMF to IVR failed (snom820). (SCPP-1150)
Apply dialplan on received/missed calls. (SCPP-141)
Switch to edit number state if we got a 484 INCOMPLETE during overlap dialing. (SCPP-950)
Added hold inactive/sendonly option. (SCPP-812)
Added optional Outbound support. (SCPP-1079)
SDP Session-Attribute "a=" was not handled.
Device Feature Key Sync did not correctly handle Forward Events.
Discard 401 challenge to REGISTER if call id is unknown.
Do not get any stats for connections without RTP stream, e.g. MoH delivery. (SCPP-1357)
Filter invalid packets no matter if they have a known Call-ID or not. (SCPP-1368)
Fixing crash when unholding a party which we had connected to a MOH-Server. (SCPP-1350)
Incorrect time stamp was causing NTLM V2 authentication to fail on older servers.
OCS: Limit number of presence subscriptions to those displayed or on a key.
OCS: Presence subscription was not refreshed when contact list changed.
OCS: Don’t make the STUN address the default when the server indicates the client is remote.
OCS: Don’t send any SUBSCRIBE or SERVICE requests while NTLM negotiation is in progress.
OCS: ICE negotiation blocks early media. (SCPP-1016)
OCS: Stale SA causes phone to lose registration. (SCPP-1160)
OCS: When an local relay ICE candidate becomes "received valid" activate it only after connectivity check completes.
OCS: Reregister as soon as SA expires.
OCS: Reset the TCP connection when the SA expires and reregister immediately.
RE diaplan: Back reference to non-existing group "from" sometimes produced junk because captured groups were not cleared.
Send another ACK if we receive a second 2xx. (SCPP-832)
Unregister sets unregistered identity to inactive. (SCPP-599)
As-feature-event re-subcriptions sometimes had a non-empty body.
Fixed handling of ringing/knocking call if all conference members hook on. (SCPP-552)
Fixed missing Eventlist Resubscribe on Notify indicating Subscription Terminated from Broadsoft. (SCPP-601)
Fixed session timer refresh with SIP Update method. (SCPP-1219)
Message retrieve was not properly working with 3CX. (SCPP-1307)
On register responses select own contact with the help of optional instance ids. (SCPP-1247)
Fixed hanging when SDP contains g.726 codec (snomMP). (SCPP-1356)
Update called party id depending on P-Asserted-Identity header on SIP responses. (SCPP-1189)
Use display name of P-Asserted-Identity header uri’s on SIP responses. (SCPP-1189)
Use only first Register Response and ignore follow up responses. (SCPP-1134)
When an INVITE had been send out and a connection was established before (e.g. start hold) the DTMF payload type was used from the old connection. Now, the payload type is taken from the settings.
TFTP
TFTP client supports now subdirectories. (SCPP-477)
TLS
The webclient re-initiates an handshake when handling a challenge. It will never try to reuse an existing connection anymore.
TR-69
Action GetParameterValues on Device. failed (snom300).
VLAN
Switched based port tagging was not working (snom820). (SCPP-1148)
VPN
Fixed (snom870, snomMP).
Fixed crash on denying incoming call. (SCPP-163)
WEB
Web page Trusted Certificates removed. Was obsolete anyway. (SCPP-1129)
Key event retrieve can be set to fkey now (snom300). (SCPP-1221)
Don’t ask for password during logout. (SCPP-1277)
Fixed switching between drop-down combo-box and plain text-field for pkeys (snom8xx).
Some early log messages were missing, as the loglevel was set to late.
Some setting changes were effecting other settings even though they were not been changed by the user. (SCPP-1123)
Fixed showing pictures from persons that have special characters in their name. (SCPP-1334)
Now setable again via webpage (was lost): "keyevent F_CONFERENCE:meineconfURI@confserver.com" (SCPP-1266)
XCAP
Synchronization now ignores obvious dummy sip numbers. (SCPP-1388)

8.3.7 Bugfix

  • VPN support is working now.
  • Fixed one way audio problem. Also some OOB DTMF clean up. (SCPP-1327)

8.3.6 Bugfix

  • Fixed proper random seed generation.
  • If setting block_url_dialing is enabled, the edit-mode button is disabled now.
  • Fixing how number guessing handles tbook-search (was still version7-style that didn’t know of new tbook attributes and multi-number records).
  • Enabled Backlight control. (SCPP-1076)

8.3.5 Bugfix

  • Eliminated racecondition.
  • Gigabit speed on PC port enabled again.

8.3.4 Bugfix

  • Ringer menu fixed (snom870). (SCPP-1098)
  • Putting a party on hold that in turn is holding us, now works via touchscreen (snom870). (SCPP-1223)
  • Pressing hard-key OK now selects the correct (previous) value, when editing boolean values (snom870). (SCPP-1099)
  • Fixed some issues with blind transfer using drag and drop (snom870). (SCPP-1093)
  • Increased speed when rendering virtual key state (snom870). (SCPP-973)
  • Repaired loss of internal adress book. (SCPP-1135)
  • Fixed sticky trashcan (snom870). (SCPP-1104)
  • Saved more than 50% of parsing time by using new XML parser features.

8.3.3 Bugfix

  • Better audio quality (especially no microphone saturation).
  • Dual Audio button works now. (SCPP-1162)
  • Fixed duplicate pickup information in call pickup screen. (SCPP-1102)
  • Added new setting cancel_conference to allow disconnecting all conference members with cancel key. (SCPP-1069)
  • Number guessing minimum length will work only in state edit number in numeric edit mode.(SCPP-1030)
  • When creating a new entry in the directory, the edit button did not work.
  • MWI led has to blink in all states.
  • Added more flexible way of configuring IPv6 gateway.
  • OCS: Remove "Reboot warning" when setting up OCS account. (SCPP-1014)
  • Call Pickup did not work with multiple registrations. (SCPP-991)
  • Call was sometimes not released properly. (SCPP-1207)
  • Device Feature Key Sync did not correctly handle Forward Events.
  • OCS: Phone should not attempt to reregister as long as password prompt is active. (SCPP-1009)
  • Answering a call was failing and log said: "Failed to allocate any local SIP port!". (SCPP-1042)
  • Reregister asap if TCP/TLS register connection goes down. (SCPP-1109)
  • Sending DFKS subscriptions due to state transitions only to the active line.
  • The webclient re-initiates a handshake when handling a challenge. It will never try to use an existing connection anymore.
  • Firmware update wasn't using HTTP proxy when specified.

8.2.29 bugfixes

PUI
When pressing a blinking line key of a second incoming call, instead of displaying edit number, the call gets connected now. (SCPP-1563)
Fixed crash from going to conference after disconnecting a third single connection. (SCPP-1562)
Disable monitor key "calls" for non-graphical display (snom320). (SCPP-1561)
Setting "block url dialing" works now (snom300). (SCPP-1560)
XCAP
Minimize polling of directory after failure due to to huge remote directory.

8.2.28 bugfixes

SIP/PUI: INVITE with "inactive" doesn't disable the display. (SCPP-1550)

LID
fixed buffer overflow protection (SCPP-1545)
PUI
Fixes erratic broken redial.
HTTP Client
Do not cut HTTP Content-Length header if the attachment is empty.
Do not write VLAN-specific settings into uBoot environment on factory reset.

8.2.27 bugfixes

SDP/RTP
Fixed a one-way audio scenario.
SIP
Call flow optimization. (SCPP-1428)
WEBCLIENT
Stop dangling web client request after a timeout and allow just 64 open requests in parallel.
XCAP
rejecting directories that don't fit the phone.

8.2.26 bugfix

Due to a bug report the following changes in 8.2.25 were undone:

BOOT
u-boot is setting up VLAN specific when the switch registers in order to not disturb a PC connected to the 2nd switch port (PC port) while the phone starts
NET
made sure that the port VLAN un-/tagging is initialized right before the properties for the ports are set

8.2.25

AUDIO
If setting offhook_dial_prompt is off, speaker key is fixed in idle mode after off-/onhook. (SCPP-1371)
Suppress DMTF during call deflection. (SCPP-1459)
Fixed OCS conference audio distortion (snom820). (SCPP-1373)
CSTA
The CSTA Response message had an invalid syntax and generated warnings in XML DOM Parser. (SCPP-1370)
Empty calling device will use the current active line now. (SCPP-1427)
DHCP
A lease time above 29bit (ca. 17 years) is treated as infinity.
PUI
Conference button was not correctly toggling conference on and off. (SCPP-1352)
Don’t cover wrong time and date anymore when NTP failed. Show system time in every case. (SCPP-1380)
Fixed a bug that added ghost characters behind the cursor when edited string contained several special characters (snom320).
Hebrew was not working in big font as well (snom370).
Fixing OFFHOOK when in virtual key state (snom820).
Fixing capital special character spacing. (SCPP-1436)
Fixing letter input for dialing when coming from directory. (SCPP-1435)
Help page pointing to web user interface now uses correct URL scheme and adds even the port if differs from 80 (SCPP-1305).
Setting contrast via dummy web userinterface page, the contrast was not applied to the display. (SCPP-1377)
Making ONHOOK count when in virtual key state and wanting to cancel own outgoing call. (SCPP-1433)
Minibrowser text and menu rendering wasn’t working on two line displays (snom300, snom320). (SCPP-1461)
Fixed error shown on minibrowser triggered settings save. (SCPP-1456)
Added new setting transfer_on_hangup_non_pots to have no POTS behavior for using transfer on hangup. (SCPP-1451)
No longer ignoring ONHOOK when showing virtual keys. (SCPP-1361)
Playing ringer on login page fixed. (SCPP-1386)
Setting dim_timer is available for all phones except snom360 now.
The outgoing identity will be changed if an identity will be removed in phonemenu and it was selected as the current ougoing line. (SCPP-1450)
Fetch an URL if set in SoftkeyItem tag. (SCPP-1478)
Up-/Down key will work in minibrowser as well (snom300, snom320). (SCPP-1477)
LID
Fixing displaying of hebrew characters. (SCPP-1442)
VLAN
Made sure that ethernet port VLAN un-/tagging is initialized once in bootloader and stays like it while the whole system is starting up. This is important for a PC connected to the 2nd switch port (PC port) in order to not disturb the network connection while the phone starts (snom300, snom320, snom360, snom370). Is available with u-Boot version 1.1.3-v.
PROVISIONING
Increased provisioning retry counter from 1 to 5.
RTCP
BYE is now encrypted if in SRTCP. Also fixed BYE length. (SCPP-1333)
Fixed RTCP in conference mode (including SRTCP). (SCPP-1311)
SETTINGS
It is not possible anymore to provision the setting firmware_version. (SCPP-845)
Reregister was failing if line settings were changed in background via provisioning. (SCPP-1462)
Made sure that the setting value of ntp_refresh_timer is set between 60 seconds and max signed int, which is around 9 hours.
Setting time_24_format defaults to on now. (SCPP-1343)
SIP
Apply dialplan on reveived/missed calls. (SCPP-141)
Added hold inactive/sendonly option. (SCPP-812)
Do not get any stats for connections without RTP stream, e.g. MoH delivery. (SCPP-1357)
Don’t show anonymous if Privacy=id but P-Asserted-Identity is set. (SCPP-585)
Filter invalid packets no matter if they have a known Call-ID or not. (SCPP-1368)
Fixed negative expire timers after reregister and other subscription bugs. (SCPP-1430)
Fixing crash when unholding a party which we had connected to a MOH-Server. (SCPP-1350)
Added new setting sdp_version_check used for switching the DSP version check. (SCPP-1429)
No longer ignoring contact-field in subscription notifies. (SCPP-1431)
SDP Session-Attribute "a=" was not handled.
Send another ACK if we receive a second 2xx. (SCPP-832)
Fixed missing Eventlist Resubscribe on Notify indicating Subscription Terminated from Broadsoft. (SCPP-601)
DIRECTORY
Limiting space available for sort-criteria so that one sees which number will be dialed (snom300, snom320). (SCPP-1363)
Showing best string to identify an identity (eg. the display name) instead of (Identity 1, …) (snom300, snom320). (SCPP-1363)
Changing of sort order works again. (SCPP-1363)
Fixed nick name handling when adding a sub number to a single entry. (SCPP-1388)
Fixed that multi numbered records always claimed to have active identity set. (SCPP-1363)
Fixing provisioning. (SCPP-1391)
Huge file uploads with watchdog enabled no longer restart the phone. (SCPP-1409)
Removed bug that caused XCAP XML to loose contacts. (SCPP-1388)
Stop temporary creation of locally deleted directory records when they are found in XML from XCAP server. (SCPP-1388)
TR-69
Action GetParameterValues on Device. failed (snom300).
UPDATE
Create correct encoded proxy update URL (snom820, snomMP). (SCPP-1397)
WEB
Fixed showing photos from persons that have special characters in their name. (SCPP-1334)

8.2.24 Bugfix

  • When going to idle state, onhook command is now send to headset as well. (SCPP-432)
  • Retry DNS resolving several times also during provisioning. (SCPP-1316)
  • Press CANCEL key during number guessing will display the current input only, so you may dial this number (snom300, snom320). (SCPP-1338)
  • Solved cold boot hang issue (snom3xx). Bootup may last longer, but is more reliable.
  • Attended transfer was not working properly when using SRTP and G726-32.
  • Fixed crash on denying incoming call. (SCPP-163)
  • Webclient needs encoded URL credentials and path (snom8xx). (SCPP-1243)

8.2.23 Bugfix

  • Added setting mc_output_device to play PA media via speaker or headset. (SCPP-1264)
  • Restore original media stream if REFER initiated INVITE failed. (SCPP-1288)
  • Exit minibrowser when XML contains nothing usefull to display. (SCPP-892)
  • Made directory details of call partner accessible in ringing and calling screens (press directory button). (SCPP-1310)
  • Refresh display after changing setting Text Only Display on Soft Keys. (SCPP-1301)
  • Refresh fkeys in idle XML screen. (SCPP-1280)
  • Subscribe to those keys only, that are available. Ignore subscriptions for keys on extension keypads that are not plugged in. (SCPP-716)
  • Fixing first-digit LDAP lookup bug (SCPP-1041).
  • If no LDAP result entry was selected and dialing is started, phone shows enter number prompt. (SCPP-1306)
  • Removed global ringer setting ring_sound which is redundant and confusing as the ringer is taken from the line dependent setting user_ringer. (SCPP-1318)
  • Discard 401 challenge to REGISTER if call id is unknown.
  • Fixed handling of ringing/knocking call if all conference members hooked on. (SCPP-552)
  • Message retrieve was not properly working with 3CX. (SCPP-1307)

8.2.22 Bugfix

  • OCS: Fixed audio reception when using conferencing (snom820).
  • DTMF send improvements (snomMP). (SCPP-1273)
  • Apply dialplan when dialing missed or received records that only consist out of an URL (without display name). (SCPP-1284)
  • Fixed transparency handling for idle XML images (snom820).
  • After attended transfer, display shows state connected and no longer state onhold. (SCPP-1272)
  • Call forwarding set for a local identity will work with Asterisk now. (SCPP-1278)
  • Edit enums fixed. Scrolling to left is possible now (snom320). (SCPP-1267)
  • If keyboard lock is on, reset already typed in number if a digit is entered that do not match any emergeny number. (SCPP-1253)
  • Send busy when CWI is off, but not in general if phone is in state conference. (SCPP-1276)
  • Fixed feature of saving latest call records to flash: when list was full, new records were not saved. Bug resulted in only saving the oldest records.
  • Fixed fkeys provisioning via xml-subtrees which did not send out subscribtions.
  • Fixing how number guessing handles directory search (was still version 7 style that didn’t know of new directory attributes and multi-number records).
  • Fixed proper random seed generation (snom820, snomMP).
  • OCS: Presence subscription was not refreshed when contact list changed.
  • Fixed RE dialplan: Back reference to non-existing group may have produced junk, because previously captured groups were not cleared properly.
  • When an INVITE had been send out and a connection was established before (e.g. start hold) the DTMF payload type was used from the old connection. Now, the payload type is taken from the settings.
  • Allow to enter numbers with + via web UI.
  • Fixed synchronization with XCAP server.
  • Don’t ask for password during logout. (SCPP-1277)
  • Fixed switching between dropdown combobox and plain text field for pkeys (snom820).
  • Some early log messages were missing, as the loglevel was set too late.
  • An keyevent like F_CONFERENCE:meineconfURI@confserver.com can be set up again via web UI. (SCPP-1266)

8.2.21 Bugfix

  • DTMF keytones while dialing were not working. Now they are working in handset mode. Currently, we cannot support playing them in speaker mode as well (snom820). (SCPP-1159)
  • Virtual key state now correctly colors keys defined as buttons (activity and pickup color) (snom820). (SCPP-804)
  • Changed timezone for Korea from +8 to +9. (SCPP-1260)
  • Don’t process backspace if edit type is enum (sort options). (SCPP-1251)
  • Handle transfer hard key in state calling. (SCPP-1237)
  • Show holding or held-by members in conference. (SCPP-1103)
  • Show correct positioned SMS message on screen. (SCPP-557)
  • Call-Pick Up was not properly working. (SCPP-1238)
  • Saved more than 50% of parsing time by using new XML parser features.
  • Fixed indexing of buttons. (SCPP-804)
  • Improved performance due to avoiding unused messages. (SCPP-1227)
  • Write empty passwords instead of stars as password setting value. (SCPP-463)
  • Fixed session timer refresh with SIP Update method. (SCPP-1219)
  • On register responses select own contact with the help of optional instance id’s. (SCPP-1247)
  • Use display name of P-Asserted-Identity header uri’s on SIP responses. (SCPP-1189)
  • OCS: ICE negotiation blocked early media. (SCPP-1016)

8.2.20 Bugfix

  • Conferencing was unusable.
  • Call recording enabled again.
  • Fixed sticky photo bug (snom370). (SCPP-286)
  • Refresh XML idle screen when XML url has changed. (SCPP-936)
  • Delete related fkey settings of removed identity as well. (SCPP-442)
  • Going off hook with wireless headset will now take setting preselection_nr into account as well, like handset already does. (SCPP-248)
  • Setting up WIFI credentials was not working properly (snom820).

8.2.19 Bugfix

  • Fixed Auto Answer Indication (snomMP). (SCPP-1026)
  • Fixed listening to multicast streaming (snomMP). (SCPP-1185)
  • Reenabled missing call release notification when a call had been terminated even if setting release_sound was set to on. release_sound distinguishes now between on, off and off_when_terminating_calls. Replaced radio button with drop down on the web interface page. (SCPP-1006)
  • Deletion of single sub-numbers of multi-number directory record now possible. (SCPP-1192)
  • Don’t resend ring command if phone is already ringing even if there is more than one incomming call. (SCPP-972)
  • Indicate new voice-message via message-LED even during calls.
  • Digit input in idle state fixed. It’s possible to enter numbers or select an entry out of the add-menu with speeddial (snomMP). (SCPP-1216)
  • Pressing Record key in conference state terminates the recording line. (SCPP-1220)
  • Virtual key name lookup is working with full URIs. (SCPP-1094)
  • OCS states now available for fkeys (in virtual key-view and snom820 side screen) (snom820, snom870). (SCPP-1177)

8.2.18 Bugfix

  • Switch to speaker mode after going on hook in the states edit number or connected. (SCPP-988)
  • Codec type and TX-RX stats could not be displayed anymore during call at the display. (SCPP-1206)
  • Accept incoming calls with line keys in state conference. (SCPP-1131)
  • Accept transfer key in state transfer. (SCPP-798)
  • Add URI in calling lists even if registrar contains parameter. (SCPP-1039)
  • Clean paint area for title (snom370). (SCPP-1191)
  • Don’t handle key event F_LOGOFF_ALL if a line is connected or on hold. (SCPP-1203)
  • Handle the programmable keys in state settings as well. (SCPP-293)
  • Long numbers fit now into display (snom360). (SCPP-843)
  • New handling for incoming calls during conference (snomMP). (SCPP-753)
  • Added new setting transfer_on_hangup_with_starcode to allow transfering calls on hangup if one call was picked up with PBX starcode. (SCPP-906)
  • Added new setting dialnumber_us_format to switch off the U.S. dialnumber format. (SCPP-620)
  • No blinking status line if MWI is on (mailbox message received). State MWI is now matching snomMP style. (SCPP-1027)
  • Setting Use Speaker Key to Receive Calls is valid for headsetkey too now. (SCPP-1154)
  • Switch to state edit number if we got a 484 INCOMPLETE during overlap dialing. (SCPP-950)
  • Fixed memory leak when loading remote images (snom820). (SCPP-839)
  • Write settings again to flash filesystem when change was made via webUI.
  • Fixed sending inband DTMF (snom820). (SCPP-1150)
  • Call was sometimes not released properly. (SCPP-1207)
  • OCS: Don’t send any SUBSCRIBE or SERVICE requests while NTLM negotiation is in progress.
  • OCS: Limit number of presence subscriptions to those displayed or on a key.
  • OCS: Reregister as soon as SA expires.
  • OCS: Reset the TCP connection when the SA expires and reregister immediately.
  • Block TR69 authentication attempt for one minute when authentication has failed 5 times in series. (Sending 403 Forbidden instead.)
  • Intercept race conditions caused by the ACS if too many requests come in.

8.2.17 Bugfix

  • Fixed headset from ringing only once per incomming call to now every 3 seconds. (SCPP-416)
  • Fixed multicast handling (snom820). (SCPP-1075)
  • Fixed handling of huge and infinitive lease times. (SCPP-1173)
  • Don’t dial last LDAP result if number has changed and no LDAP result was found (snom300, snom320). (SCPP-1120)
  • Close "call stats" dialog if call is incoming. No call stats shown in state conference. (SCPP-1105)
  • Configured function keys work now in every state, if not set to type "Key Event". (SCPP-931)
  • Custom ring melodies above 300kb will be ignored. (SCPP-891)
  • Fixed using LDAP out of contact pool. (SCPP-1169)
  • Navigation keys actived for selecting entry out of LDAP search results in state edit number (snomMP). (SCPP-1145)
  • MWI changes to normal dialtone independently of GUI state. (SCPP-510)
  • Playing "Internal Ringer" set by preferences webpage if alert-info is set. (SCPP-1058)
  • Playing ringer of current line from webinterface. (SCPP-1019)
  • Redefined CANCEL key when user is asked whether he wants to use DHCP or not. Instead of switching DHCP off, the user is transferred back to the main settings. (SCPP-1181)
  • Repaired loss of internal adress book. (SCPP-1135)
  • Show call duration time (snom300, snom320). (SCPP-1138)
  • Show cursor in LDAP during editing search string only. (SCPP-670)
  • Transfer in state conference is now handled as in state connected. (SCPP-872)
  • Use solid backgound image for softkeys if setting text_softkey is enabled. (SCPP-871)
  • Not accepting content that is so huge that it could crash the phone. (SCPP-891)
  • TLS connections now also work when using an HTTP proxy. (SCPP-1047)
  • If the provisioning location was specified without scheme, skip the generated HTTP urls if one of the phone generated TFTP urls were successful. (SCPP-1008)
  • Limit writing settings to flash filesystem to a minimum. Just write after provisioning and right before reboot in order to get the phone freezing cured (new setting apply_settings_timeout can enable the old behavior again by setting it to 20; it is set to zero by default).
  • OCS: Stale SA caused phone to lose registration. (SCPP-1160)
  • TFTP client supports now subdirectories. (SCPP-477)
  • Save persistent data even on firmware update. (SCPP-1133)
  • Switch based port tagging was not working (snom820). (SCPP-1148)
  • Removed obsolete "Trusted Certificates" webpage. (SCPP-1129)

8.2.16 Bugfix

  • Add DSCP/TOS on RTP streams (snomMP). (SCPP-1092)
  • Fixed conference (one way audio in one leg) when one party was on GSM and the other on G.711u on asterisk (snom3x0). (SCPP-1113)
  • Volume down key interfered with a 1633 Hz DTMF tone.
  • Fixed duplicate pickup information in call pickup screen. (SCPP-1102)
  • Go offhook with wireless headset will dial number out of internal or LDAP directory. (SCPP-1072)
  • Added new setting cancel_conference to allow pressing Cancel key to disconnect all conference members. (SCPP-1069)
  • OCS: Contact list groups can not be switched (snomMP). (SCPP-1035)
  • Picking up a second call with speaker button wasn’t working.
  • Text scrolling wasn’t working properly (snom370). (SCPP-1060)
  • The edit button did not work, when creating a new entry in the directory.
  • MWI LED has to blink in all states.
  • OCS: Remove "Reboot warning" when setting up OCS account. (SCPP-1014)
  • OCS: Removed G.723 codec from default initialization in OCS edition (snom820).
  • OCS: Phone should not attempt to reregister as long as password prompt is active. (SCPP-1009)
  • Answering a call was failing and log said: "Failed to allocate any local SIP port!". (SCPP-1042)
  • Resubcriptions sometimes had an non-empty body.
  • Reregister asap if TCP/TLS register connection goes down. (SCPP-1109)
  • The webclient re-initiates a handshake when handling a challenge. It will never try to use an existing connection anymore.
  • Firmware update wasn’t using HTTP proxy when specified.

8.2.11 Bugfix

  • send DFKS subscriptions due to state transitions only to the active line
  • Number guessing minimum lenght will work only in state edit number in numeric edit mode.(SCPP-1030)

8.2.10 Bugfix

  • Device Feature Key Sync did not correctly handle Forward Events.
  • Crash when downgrading (or upgr.) to firmware versions with smaller adr.book size limit (maximum number of entries).

8.2.9 Bugfix

  • Fixed no ringing and no dial tone problem after opening a new call while holding the old one with the function key (in non G.711 codec call).

8.2.8 Bugfix

  • Fixed phone ringer silence on subsequent calls after using non G.711 codec in a call (snom3xx).
  • Fixed G.726 bad audio problem (snom3xx).
  • Fixed dimming timer setting dim_timer for snom820 backlight. (SCPP-332)
  • Added more flexible way of configuring IPv6 gateway.
  • Call Pickup did not work with multiple registrations. (SCPP-991)

8.2.7 Bugfix

  • Added standard Italian dialtone. (SCPP-697)
  • Fixed one way audio after ca. 10 minutes with SRTP (snomMP). (SCPP-866)
  • Fixed DTMF on/off switching issue with SRTP. (SCPP-880)
  • Added support for controlling microphone volume (snom820). (SCPP-681)
  • Fixed microphone muting during conferencing (snom820). (SCPP-255)
  • Acording to RFC, lease timer handles now 32bit wide timeouts in seconds. (SCPP-867)
  • Lease renew request wasn't RFC compliant. (SCPP-946)
  • General performance improvements and memory usage optimizations which fixed freezing behaviour as well. (SCPP-669, SCPP-838, SCPP-905)
  • Added display names and presence state information to contact list. (SCPP-879)
  • Dialing from web interface may create invalid URLs with some OCS dial plans. (SCPP-732)
  • No delay after key press in minibrowser. (SCPP-794)
  • Fixed transfer issue with no destination number. (SCPP-849)
  • Onhook will cancel call even if phone is in minibrowser state. (SCPP-751)
  • Restart keyboard lock timer after unlock. Apply keyboard lock settings from webUI. (SCPP-887)
  • Transfer key will work in state holding as well (snom300). (SCPP-935)
  • Transfer on onhook now works with picked up calls as well. (SCPP-632)
  • Update display if Detect Ethernet Cable Unplug is switched off. (SCPP-944)
  • Store missed call in caller list even when DND is active. (SCPP-938)
  • "Enhanced" data returned from LDAP were interfering with dial plan. (SCPP-842)
  • Display method setting will be applied and not only stored when coming in with a check-sync. (SCPP-619)
  • Only 4 identities are valid for snom300. Handle even old setting file with 12 identities without hanging. (SCPP-772)
  • The "!" setting flag wasn't working if user was changing a setting value back to default. (SCPP-890)
  • OCS: Redirect on REGISTER failed. (SCPP-901)
  • OCS: Attended transfer fails in certain scenarios. (SCPP-916)
  • OCS: Calling a phone makes user Available. (SCPP-913)
  • OCS: Dialplan conversion should drop blanks from pattern. (SCPP-912)
  • OCS: No Audio when both ends select TURN candidate. (SCPP-957)
  • OCS: Only first Identity goes back to Available, others stay Away. (SCPP-862)
  • Preference field in NAPTR record was misinterpreted as a weighting factor. (SCPP-945)
  • Stale nonce indication was not handled. Now phone evaluates the "stale" parameter in the WWW-Authenticate header. If it is set to true, phone will retry with the same credentials. (SCPP-930)
  • Contact address was not refreshed on re-SUBSCRIBE. (SCPP-923)
  • Fixed dirty host cache entries invoked by incoming ICMP packets (SCPP-895) and by UDP request timeout (SCPP-899). A phone using Proxy Failover due to dns naptr and with dirty host ttl configured adds now the failed server to the dirty host cache.
  • Fixed subscription if subscription target got new contact due to reboot. (SCPP-846)
  • Fixed a couple of Device Feature Key Synchronization Issues. (SCPP-271)
  • The index of a button message now addresses the parameter of a button function key rather than the number of the fkey. (SCPP-782)
  • Firmware update via HTTP(S) with credentials wasn't working (snom820, snomMP). (SCPP-918)
  • Provisionend firmware updates were not starting sometimes. (snom820, snomMP). (SCPP-922)
  • Made improvements to OCS Account Wizard. (SCPP-410)
  • HTTP proxy support of web client wasn't working properly (SCPP-542). Added new settings for HTTP proxy credentials: http_proxy_user, http_proxy_pass.
  • Show LCS Uptime and system load average on info.htm. (SCPP-396)
  • Show logout button even if setting ignore_security_warning is off.
  • Moved logout button to the left.
  • Showing logged out page after logging out. (SCPP-888)
  • WIFI Wasn't working properly for certain essids (snom820). (SCPP-840)

8.2.6 Bugfix

  • Fixed G.729 distorted audio and one way audio problems (snom3x0).
  • Decreasing Volume during call does not generate a sound anymore (snom820). (SCPP-752)
  • Clear area of status line for XML idle screen at given position else at default position (snom360, snom370). (SCPP-815)
  • Set edit mode to numeric for editing numbers if no text to be edited is already set. (SCPP-746)
  • Don't save passwords in exported settings files. Accept empty admin password after reading setting file. (SCPP-823)
  • Could not take call off hold when Shared Line is active identity. (SCPP-445)
  • Don't set mute after deflection to off. If deflection feature is disabled, transfer key does nothing. (SCPP-825)
  • Function "Play ringer remotely" was playing the ringer of identity X, but not the ringer X. (SCPP-811)
  • Stale 401 should be ignored. (SCPP-708)

8.2.5 Bugfix

  • Timezone setting: UP/Down key selects next timezone. Right/left key selects the next timezone group (one hour +/-) (snom300, snom320). (SCPP-781)
  • Don't scroll to next identity if an other than the current one was removed. (SCPP-816)
  • Enable audio device change from speaker to headset in holding state (snom300). (SCPP-674)
  • Authorization headers were appended endlessly to REGISTER messages when authorization scheme was not NTLM. (SCPP-783 rework)
  • Scroll to next identity if current identity was removed or show logon wizard if all identities were removed. (SCPP-621)
  • Aborting transfer if phone goes onhook. Send Re-INVITE and switch audio to speaker. (SCPP-667)
  • Call deflection was not working when destination was taken from a list such as dialed number or contacts. (SCPP-797)
  • Fixed G.726 bad audio quality. Added the RFC3551 byte packing order for G.726 codec (new line setting user_g726_packing_order). (SCPP-785)
  • 400 class response to a REFER was not handled. (SCPP-792)

8.2.4 Bugfix

  • If a call out of holding state is terminated goto terminate state first (e.g. play signal). (SCPP-757)
  • Phone did not always send out a SIP line seize message when function keys are configured as buttons. (SCPP-723, SCPP-756)
  • Fixed on/off switching of setting flood_tracing. (SCPP-779)
  • Accept KEY=TRANSFER also on snom300. (SCPP-764)
  • Fixed issue with remote RTP address update due to ICE (snomMP).(SCPP-749)
  • Call duration longer than an hour will be displayed with an h at it's end. (SCPP-767)

8.2.3 Bugfix

  • If the number of missed calls was greater than 9 the number was displayed backwards. (SCPP-740)
  • Use big font size in edit mode if Hebrew character mode is switched off (we do not support big Hebrew characters yet). (SCPP-738)
  • When one pressed the volume keys and used the soft keys to change the volume and you return to the idle screen, calls were canceled. (SCPP-737)
  • Fixed a couple of Hebrew display bugs.
  • Fixed issues which occured in edit mode.
  • Changed default character modes in the address book and in edit mode.
  • New softkey contactpool in states edit_number, transfer and hold to have quick access to all directories and call lists. (SCPP-728)
  • Fixed display of History-Info header. (SCPP-726)
  • The ext parameter was being removed from a tel URI by dial plan processing. (SCPP-595)
  • Show history-info (snom820). (SCPP-727)
  • Added more memory bins to avoid memory waste and increase memory usage efficiency. (SCPP-396)
  • Voice Quality Report (MetaSwitch) included wrong start time value.
  • VQM stats enabled again, they were temporarily removed before.
  • Fixed issue with no network connection at all (snom370). (SCPP-735)
  • Don't save magic password (consists out of asterisks) if http password is empty. (SCPP-741)

8.2.2 Bugfix

  • Fixed bug in word-wrapping routine (snom820).
  • Fixed entering password with multi-byte characters.
  • DTMF duration fixed for SIP-INFO. (SCPP-609)
  • Audio device icon fixed in holding state (snom370). (SCPP-508)
  • There was no functionality available for fkeys in holding state (snom320). (SCPP-677)
  • There was still an animation icon shown if ringer animation was disabled (snom820). (SCPP-694)
  • Extension key inoperative on shared line, when phone is off-hook. (SCPP-628)
  • Changing GUI language wasn't affecting soft key texts. (SCPP-704)
  • If a list of pickup calls appeared on the display and you choose one to pick up, the first call that came in was taken always.
  • GRUU contact header was enclosed in quotes. (SCPP-451)
  • Call pickup did not work correctly if display name was sent by the server.
  • Phone wasn't booting up if SIP OPTIONS messages were sent to it during boot up (snom820). (SCPP-702)
  • NTLM authentication failed when display name in From header contains a comma. (SCPP-651)
  • SIP UDP src port and sip port encoded in sip message is now equal (snom370). (SCPP-484)
  • Intercom feature signaled via "interkom=true" has been disabled. (SCPP-701)
  • Multicast paging was not working reliably (snom3x0). (SCPP-226)
  • Images of CANCEL, TICK and NAVI key are shown in 3xx style now on function key page (snom3x0). (SCPP-666)
  • Key events list of fast and line keys will offer CONFERENCE and RECORDING on function key page for 3x0 phones too (snom3x0). (SCPP-675)
  • Requeueing of failed provisioning URL was shortening the URL by one character on each attempt.
  • 0 is no valid vlan id, vlan init is ignoring it now. (SCPP-683)

8.2.1 Bugfix

  • Fixed cursor-position when editing IP's. (SCPP-428)
  • XML-idle-screen name of tag for font-color changed to "Color" (from "Font") (snom820).
  • Handle fkeys on released and not on pressed (snom370, snom820 and snomMP). (SCPP-565)
  • Do not accept IP-address with leading zeros in a subnet. (SCPP-534)
  • Fixed edit mode changing during enter number for call forwarding entered with softkey in idle state. (SCPP-563)
  • Redirect softkey implemented in edit number state, if accepting incoming call and later canceling it this call will then go back to idle state. (SCPP-604)
  • (Re-)start autodial timer (if enabled) only after key events and not on entering LDAP search. (SCPP-584)
  • Offhook will switch audio from speaker to handset and is not dependent on phone state. (SCPP-567)
  • Refresh idle screen after removing URL for idle-xml. (SCPP-568)
  • Refresh date after changing it's format. (SCPP-541)
  • Displayname (if set) will be used instead of number in line info (snom820). (SCPP-547)
  • Fixed wrapping of continuous text in minibrowser. (SCPP-551)
  • Refresh GUI after onhook when the phone is the state 'call holding' to change audio icon. (SCPP-509)
  • Softkeys for adressbook unified. Default edit mode is alphanumeric. Search is case insensitive. Softkey for changing edit mode only for Hebrew/Cyrillic enabled. (SCPP-607)
  • Pressing keys out of range of setting menu selection will be first or last entry but submenu will not be entered. (SCPP-625)
  • Same behavior of clearing a list or delete an entry like version 7.3 does. (SCPP-617)
  • Transfer on onhook will only connect one incoming and one outgoing call. (SCPP-632)
  • On LDAP search split a matching line into several lines if a member has more than one phone number. (SCPP-538
  • LDAP lookup for incoming calls displays only exact matching number. (SCPP-559)
  • Fixed displaying utf8 search results (snom320). (SCPP-556)
  • URI parameters were being stripped from contact in processing of a 302.
  • Re-INVITE from MOH server causes MOH stream to be redirected to the holding party. (SCPP-653)
  • Removed sending of spurious 482 message.
  • Always use a non-secure RTP connection for MOH. (SCPP-471)
  • Changed help dkey from F_HELP to F_SUPPORT. (SCPP-494)
  • Key events "Conference" and "Recording" are not longer available for soft keys on function keys page. (SCPP-602)
  • Overload option disabled, wasn't working anyway, but confusing provisioning.
  • Initializing of extension keypad fixed. (SCPP-614)

8.1.3 Bugfix

  • check-sync;reboot=false sometimes wasn't triggering setting reload from settings server (SCPP-515)
  • increased speed by optimizing text-prints (snom820)
  • The Re-register function was causing the phone to sometimes loose its registration
  • no longer using contact as refer-to header (SCPP-523)
  • URI scheme was not recognized when it is in caps
  • Key events Mute and Transfer are now available on function keys web interface page. (SCPP-558)
  • Minibrowser: Labled Softkeys fixed (snom820)
  • Added handling of RTCP-Remote header, so that in case a separate rtcp destination is given then that will be used. (SCPP-444)
  • limit speaker volume in case of dual speakers (snom820)
  • one can choose between two different wifi drivers (b/g and b/g/n) (snom820)

8.1.2 Bugfix

  • Fixed phone crash after deleting one of the phone's call list from entry detail view (snom320). (SCPP-458)
  • Fixed disabled ringer animation screen. (SCPP-437)
  • Consistent behaviour locking the keyboard. (SCPP-470)
  • Fixed showing guessed number (snom370). (SCPP-430)
  • Missed calls LED handling logic fixed. (SCPP-379)
  • Speed increased when reacting to keypresses or other events while showing xml-idle-screen (snom820).
  • No entry was added in the missed call history if call waiting was disabled. (SCPP-450)
  • Reorder characters if font is hebrew (snom820). (SCPP-390)
  • Play current user ringer during changing ringer volume. (SCPP-133)
  • Redraw XML-screen if active line changed. (SCPP-401)
  • Reset edit mode to numeric in transfer state. (SCPP-419)
  • Fixed timezone settings for Vladivostok and Tonga. (SCPP-420)
  • Fixed sticky login-screen. (SCPP-437)
  • Set all monitored LEDs to on after transfer. (SCPP-391)
  • Fixed maximum volume on speaker. Minimum volume level is 1 not 0. (SCPP-486)
  • Send reinvite after aborted Transfer as well as the line is "on hold". (SCPP-467)
  • Fixed call pickup if intercom is enabled. (SCPP-495)
  • Randomize request source port and DNS query id. (SCPP-479)
  • Fixed Speaker Volume Adjustment in Headset/Handset and Speaker Mode. (SCPP-480)
  • Fixed occasional one way audio problem when making a call by picking up the handset first (snom820). (SCPP-378)
  • Fixed oob DTMF detection (snom820). (SCPP-435)
  • A picture from CALL-INFO header in a provisonal 18x was never shown (snom370, snom820).
  • Transport parameter was dropped on redirected register.
  • Don't process subscribe packet if contact header is missing (could happen by an Asterisk bug). (SCPP-431)
  • Fixed rejection of anonymous calls. (SCPP-418)
  • Initialization was broken.
  • Fixed XML decoding. (SCPP-285)
  • By default answer after policy is set to "off". (SCPP-506)
  • Flash plugin didn't work with current Flash player releases due to new Flash security requirements. (SCPP-43)
  • TBook cvs import fixed. (SCPP-56)
  • WEB UI wasn't working with VLAN (snom820). (SCPP-348)
  • Added conversion of HTML special characters. (SCPP-395)

8.1.1 Bugfix

  • No Bugfixes

8.0.13 Bugfix

  • No Bugfixes

8.0.12 Bugfix

  • Return to idle by onhook in redial and directory when coming from edit. (SCPP-299)
  • No dialing through speaker key when in redial or directory and speaker already on.
  • Fixed sorting with/without title in wizard selection box for language, timezone and tone scheme (SCPP-302)

8.0.11 Bugfix

  • No bugfixes
Personal tools
Interoperability