Firmware/V8/Release Notes/Change Log V8

From Snom User Wiki

Jump to: navigation, search

Change Log between 8.X and 7.3 branch

Features

8.3.7 Features

No new features

8.3.6 Features

No new features

8.3.5 Features

No new features

8.3.4 Features

No new features

8.3.3 Features

  • Added support for OCS-presence-only (no voice) identities (Broadsoft/OCS integration) (new settings: user_presence_identity, user_presence_only, user_default_contact_uri).
  • User may now enter special characters via number-pad: äáâàçëéêèïíîìöóôòñßüúûù - just press repeatedly the key associated with the base-letter (eg. 1-abc for ä, á, â, à and ç), you must of cause be in mode abc or ABC (SCPP-528).
  • One can now configure what label to put onto the virtual keys.
  • Discard XML-idle-screen on pressing cancel key (whiping display still also yields same result). (SCPP-1084)
  • Discard call monitoring screen on cancel key. (SCPP-941)
  • Fixed duplicate pickup information in call pickup screen. (SCPP-1102)
  • Go offhook with wireless headset will dial number out of internal or LDAP directory. (SCPP-1072)
  • LDAP lookup when dialing a number now starts only when the typed in number has as many digits as defined with setting guess_start_length.
  • Menu entries are now hideable with a comma separated list in new settings menu_hidden_user and menu_hidden_admin.
  • Enabled EHS support.
  • Added call agent ACD state synchronization. (SCPP-854)
  • Internal directory can now be synchronized with certain XCAP servers. (SCPP-1047)
  • Master entries in internal directory may now define a nick name.
  • Left menu in the WUI is now configurable. Just put a comma separated list in two new settings leftnav_hidden_user and leftnav_hidden_admin for user and admin mode respectively.
  • Added runtime variable $phone_ip to be used with the webclient like triggering action URLs etc.
  • Showing bootloader version at system info page.
  • Fixed WEP mode.

8.2.29 Features

No new features

8.2.28 Features

No new features

8.2.27 Features

No new features

8.2.26 Features

No new features

8.2.25 features

FKEY
XML definition now allows to define a different dial target depending on the fkey-state, see this article.
PUI
Added new setting show_clock, which removes date and time from idle screen, if disabled. (SCPP-1263)
Timezone setup wizard now starts out with reduced list of timezones that match the choosen language (snom360, snom820, snomMP).
Letter input via numpad now depends on selected language (defines which special characters to use) but may be overwritten by values of new settings chars_in_…case_on_0..9. (SCPP-528)
Password challenge will disappear automatically when identity registers successfully (eg. if password was provided via WUI). (SCPP-1339)
WUI
If set, use the hostname of the phone as the title for the web user interface pages. (SCPP-1366)
Added new action URL which is triggered when a phone receives an attended transfer. (SCPP-1037)
XCAP
Synchronization now ignores obvious dummy SIP numbers. (SCPP-1388)

8.2.24 Features

  • Now displaying used codec and SRTP (for secure connections) when one presses the message button during a call (snom820). (SCPP-300)
  • Now displaying codec used and SRTP (for secure connections) in party-details (snomMP). (SCPP-300)
  • Codec info on ? key is now integrated into the GUI instead of destroying its design (snom370). (SCPP-300)

8.2.23 Features

  • Allow to mute the ringing of an incoming call with the mute key or a mute function key. (SCPP-937)
  • Via the setting user_admin_mode, you can hide users privacy (call lists, directory) from the administrator. (SCPP-1326)
  • Added setting ignore_missed_calls_on_busy that inhibits the phone to add an incoming call to the missed calls if the user is in dialing state and denies an incoming call.
  • Allow to edit numbers from the call histories before calling them. (SCPP-921)

8.2.22 Features

  • Subscribtions may now define a for and a to attribute. for sets the R-URI, to is for the to-field in the sip-message.
  • Increased speed when rendering idle XML’s with lots of clock-images (snom820).
  • New setting suppress_sip_messages suppresses processing of SIP MESSAGE but replies with 200 OK if enabled.
  • Added new number type attribute.
  • Increased speed when reading XML files.
  • Allowing to enter new XML description of fkeys via web UI as well.
  • Values in dropdown comboboxes for fkey-types and key-events are sorted now alphabetically.

8.2.21 Features

  • Added identity parameter to the dialplan xml which allows to route numbers to a particular identity no matter which identity is currently selcted. (SCPP-195, SCPP-1244)
  • Line LEDS can now change color according to the color-attribute received for those keys defined as buttons (snom820). (SCPP-804)
  • Virtual key state and side screen now use received labels for those keys defined as buttons (snom820). (SCPP-804)
  • Decreased provisioning retry counter from 20 down to 1.
  • Added new setting use_NTLMv2 to disable NTLM V2 authentication which is enabled by default.

8.2.20 Features

  • Pressing a speed dial function key with argument number=incomplete shows the number on the display for further editing rather then dialing it. (SCPP-194)
  • Speed dial now accepts a DTMF sequence that is played once the call has been established. (SCPP-194)
  • A provisioned directory may now entirely replace the current directory instead of just adding to it. Just set attribute complete of the directory-tree to true. (SCPP-940)
  • Provisioned directory entries may now replace old records with the same index. If you don’t want this, don’t provision an index. (SCPP-940)

8.2.19 Features

  • Added new way of provisioning fkeys to represent subscribtion-notifies (see wiki→fkey).
  • Added new setting ignore_dhcp_findings allowing to ignore certain DHCP options provided by DHCP server. (SCPP-1179)

8.2.18 Features

  • Added timezone for United Arab Emirates (Dubai). (SCPP-353)
  • Calculate round trip delay (in ms) to be used in reporting stats.
  • Enhanced VQ-Report.
  • Added support for NTLM V2 authentication.

8.2.17 Features

  • Save (to restore after a reboot) the latest 5 call records of missed, received and dialed call list, respectively.
  • Two action URLs can be configured, for pressing and releasing a key, respectively. (SCPP-1122)
  • Added new setting suppress_ringing_during_hold to enable the ringtone while other calls are on hold. (SCPP-201)
  • Add optional Outbound support. (SCPP-1079)

8.2.16 Features

  • Phones with grafical display may now enter special characters via numpad (snom360, snom370, snom820, snomMP): äáâàçëéêèïíîìöóôòñßüúûù - in edit mode "abc" or "ABC" just press repeatedly the key associated with the base-letter (eg. "1-abc" for ä, á, â, à and ç). (SCPP-528)
  • XML idle screen can now define the statusbar position even for snom370 (just like 360 and 820).
  • OCS: Added support for OCS-presence-only (no voice) identities (Broadsoft/OCS integration) (new settings: user_presence_identity, user_presence_only, user_default_contact_uri).
  • Discard "call monitoring" screen on Cancel key. (SCPP-941)
  • Menu entries are now hideable. Just put a comma separated list in two new settings menu_hidden_user and menu_hidden_admin for user and admin mode respectively.
  • Internal directory can now be synchronized with certain xcap-servers. (SCPP-1047)
  • Master entries in internal directory may now define a nick-name.
  • Left menu in the snom web UI is now configurable. Just put a comma separated list in two new settings leftnav_hidden_user and leftnav_hidden_admin for user and admin mode respectively.
  • Added runtime variable $phone_ip to be used with the webclient like triggering action URLs etc.

8.2.11 Features

No new features

8.2.10 Features

  • Call Agent ACD State Synchronization (SCPP-854)

8.2.9 Features

  • LDAP lookup when dialing a number now starts only when the typed in number has as many digits as defined with setting guess_start_length.
  • 820 now opens virtual key state automatically on activity, setting allowing that is on by default.

8.2.8 Features

8.2.7 Features

  • Added support for version 6 audio coefficients (snom3xx). Selecting the new room type "v6" leads to same volume behaviour as in version 6 releaeses. (SCPP-889)
  • Added support for options 132 vlan_id (802.1q) and 133 vlan_qos (802.1p). They can even be tunneled via option 43. (SCPP-859)
  • Added OCS support for presence key. (SCPP-641)
  • Minibrowser can now be invoked using HTTP. (SCPP-238)
  • Minibrowser pages can now trigger LEDs. (SCPP-240)
  • Text prediction based search on LDAP directory. (SCPP-409)
  • Transfer on onhook is now available for blind transfer, too. (SCPP-810)
  • Added additional STUN requests (RTPv0) in the beginning of a call for server type Teles. (SCPP-671)
  • Added OID to show CPU load average of last 1min., 5min. and 15min.
  • Added OID to show used, free, cached, lid (phone lowlevel app.) and lcs (phone highlevel app.) memory usage.
  • Added OID to show application uptime.
  • Added OID to show the number of incoming and outgoing messages.
  • Added OID to show the number of open connections.
  • Added OID to show the number of timeouts running.
  • Added OID to show the number of active subscriptions.
  • OCS: The User-Agent header now includes information whether the software type is OCS or not.
  • Added intermediate certificate phone2 that signs the phone certificate. The SSL certificate message encapsulates both certificates.
  • Added support of keys up to 4096 bits in size (client and server side).
  • One can upload and replace files in bmp (snom370-VPN, snom820) and html (snom370-VPN, snom820, snomMP) directories. (SCPP-873)
  • Removed second pair of HTTP user/pwd credentials for standard user. adminmode/admin_mode_pass is enough.(SCPP-679)

8.2.6 Features

No new features

8.2.5 Features

No new features

8.2.4 Features

  • LDAP result sets are sorted now. (SCPP-747)
  • VQM reporting is no longer restricted to MetaSwitch server type anymore.
  • To reduce memory wasting for SIP trace and system log we added a new setting sip_tracing to be able to switch off SIP tracing at all as well as the new loglevel -1 to switch off logging. (SCPP-779)

8.2.3 Features

  • Added Hungarian language support.
  • Enbabled EHS support (snom300). (SCPP-612)

8.2.3 Features

  • Added Hungarian language support.
  • Enbabled EHS support (snom300). (SCPP-612)

8.2.2 Features

  • Securing communiction with random message id. New CSTA messages for set and get settings, xml push and firewall test. (SCPP-648)
  • Added option for very fast LED blink rate on ringing (new setting blink_very_fast).
  • Added keyboard lock after timeout (new setting keyboard_lock_timeout). (SCPP-676)
  • Enhanced language support for Portugues and Hebrew.
  • Added language support for Estonian and Hungarian.
  • On challenged web client requests, user gets asked for username and password at the display. This may be used to login a phone user. (SCPP-699)
  • Phone can now upload files into tmpfs and replay them as MOH. (SCPP-696)
  • Parameters like "$ip_addr" as part of the URL stored in for example setting_server are replaced with it's values before the URL is used for provisioning requests. This is the same syntax like for the Action URLs. (SCPP-698)
  • Show login page after logout. (SCPP-678)

8.2.1 Features

  • Enlarged adressbook with entries for first and family name, email, company, birthday, etc. (snom820 and snomMP). (SCPP-522)
  • Hebrew and Cyrillic character editing support.
  • Call can be started out of call lists with wireless headset as well now. (SCPP-351)
  • VQM reporting over SIP, according to draft-ietf-sipping-rtcp-summary using SIP PUBLISH.
  • Added new setting prioritise_pbx_number_lookup to ignore PBX transmitted user name for incoming calls in order to enable correct lookup in internal LDAP address book. (SCPP-131)
  • Added support for RTP listening on multiple multicast sockets.
  • Added new setting empty_tls_client_cert to use empty client certificate in TLS connections. For OCS the setting defaults to on, otherwise to off. (SCPP-597)

8.1.3 Features

  • Call Pick-up: if the first character in the string following the "|" is a "!" the rest is dialed out unaltered
  • Added support for new check-sync option: check-sync;reboot=reregister-only

8.1.2 Features

  • Added new action release to clear previously seized button line.
  • Handle header "Remote-Party-ID" for Cisco Call Manager (CCM). (SCPP-412)
  • New setting user_additional_supported_header for "additional supported headers". (SCPP-413)
  • Added key_dtmf to initiate key events with DTMF tones remotely via http://phoneIP/command.htm?key_dtmf=KEYEVENT. (SCPP-94)
  • PC port can be disabled via new eth_pc option off.

8.1.1 Features

No new features

8.0.13 Features

No new features

8.0.12 Features

  • Complete system-info is now in settings (Phone_GUI). The Help-key on the phone ("?") now shows the support message on the display.

8.0.11 Features

  • redirection with function key type BLF
  • split timezone -10:USA into -10:USA(Hawaii) and 2-10:USA(Aleutian Islands) due to different DSTs
  • a logging entry is created if an Action URL could not be accessed
  • Device Feature Key Synchronization Broadsoft
  • Broadsoft directory access via OCI-P
Bugfix

8.3.7 Bugfix

  • VPN support is working now.
  • Fixed one way audio problem. Also some OOB DTMF clean up. (SCPP-1327)

8.3.6 Bugfix

  • Fixed proper random seed generation.
  • If setting block_url_dialing is enabled, the edit-mode button is disabled now.
  • Fixing how number guessing handles tbook-search (was still version7-style that didn’t know of new tbook attributes and multi-number records).
  • Enabled Backlight control. (SCPP-1076)

8.3.5 Bugfix

  • Eliminated racecondition.
  • Gigabit speed on PC port enabled again.

8.3.4 Bugfix

  • Ringer menu fixed (snom870). (SCPP-1098)
  • Putting a party on hold that in turn is holding us, now works via touchscreen (snom870). (SCPP-1223)
  • Pressing hard-key OK now selects the correct (previous) value, when editing boolean values (snom870). (SCPP-1099)
  • Fixed some issues with blind transfer using drag and drop (snom870). (SCPP-1093)
  • Increased speed when rendering virtual key state (snom870). (SCPP-973)
  • Repaired loss of internal adress book. (SCPP-1135)
  • Fixed sticky trashcan (snom870). (SCPP-1104)
  • Saved more than 50% of parsing time by using new XML parser features.

8.3.3 Bugfix

  • Better audio quality (especially no microphone saturation).
  • Dual Audio button works now. (SCPP-1162)
  • Fixed duplicate pickup information in call pickup screen. (SCPP-1102)
  • Added new setting cancel_conference to allow disconnecting all conference members with cancel key. (SCPP-1069)
  • Number guessing minimum length will work only in state edit number in numeric edit mode.(SCPP-1030)
  • When creating a new entry in the directory, the edit button did not work.
  • MWI led has to blink in all states.
  • Added more flexible way of configuring IPv6 gateway.
  • OCS: Remove "Reboot warning" when setting up OCS account. (SCPP-1014)
  • Call Pickup did not work with multiple registrations. (SCPP-991)
  • Call was sometimes not released properly. (SCPP-1207)
  • Device Feature Key Sync did not correctly handle Forward Events.
  • OCS: Phone should not attempt to reregister as long as password prompt is active. (SCPP-1009)
  • Answering a call was failing and log said: "Failed to allocate any local SIP port!". (SCPP-1042)
  • Reregister asap if TCP/TLS register connection goes down. (SCPP-1109)
  • Sending DFKS subscriptions due to state transitions only to the active line.
  • The webclient re-initiates a handshake when handling a challenge. It will never try to use an existing connection anymore.
  • Firmware update wasn't using HTTP proxy when specified.

8.2.29 bugfixes

PUI
When pressing a blinking line key of a second incoming call, instead of displaying edit number, the call gets connected now. (SCPP-1563)
Fixed crash from going to conference after disconnecting a third single connection. (SCPP-1562)
Disable monitor key "calls" for non-graphical display (snom320). (SCPP-1561)
Setting "block url dialing" works now (snom300). (SCPP-1560)
XCAP
Minimize polling of directory after failure due to to huge remote directory.

8.2.28 bugfixes

SIP/PUI: INVITE with "inactive" doesn't disable the display. (SCPP-1550)

LID
fixed buffer overflow protection (SCPP-1545)
PUI
Fixes erratic broken redial.
HTTP Client
Do not cut HTTP Content-Length header if the attachment is empty.
Do not write VLAN-specific settings into uBoot environment on factory reset.

8.2.27 bugfixes

SDP/RTP
Fixed a one-way audio scenario.
SIP
Call flow optimization. (SCPP-1428)
WEBCLIENT
Stop dangling web client request after a timeout and allow just 64 open requests in parallel.
XCAP
rejecting directories that don't fit the phone.

8.2.26 bugfix

Due to a bug report the following changes in 8.2.25 were undone:

BOOT
u-boot is setting up VLAN specific when the switch registers in order to not disturb a PC connected to the 2nd switch port (PC port) while the phone starts
NET
made sure that the port VLAN un-/tagging is initialized right before the properties for the ports are set

8.2.25

AUDIO
If setting offhook_dial_prompt is off, speaker key is fixed in idle mode after off-/onhook. (SCPP-1371)
Suppress DMTF during call deflection. (SCPP-1459)
Fixed OCS conference audio distortion (snom820). (SCPP-1373)
CSTA
The CSTA Response message had an invalid syntax and generated warnings in XML DOM Parser. (SCPP-1370)
Empty calling device will use the current active line now. (SCPP-1427)
DHCP
A lease time above 29bit (ca. 17 years) is treated as infinity.
PUI
Conference button was not correctly toggling conference on and off. (SCPP-1352)
Don’t cover wrong time and date anymore when NTP failed. Show system time in every case. (SCPP-1380)
Fixed a bug that added ghost characters behind the cursor when edited string contained several special characters (snom320).
Hebrew was not working in big font as well (snom370).
Fixing OFFHOOK when in virtual key state (snom820).
Fixing capital special character spacing. (SCPP-1436)
Fixing letter input for dialing when coming from directory. (SCPP-1435)
Help page pointing to web user interface now uses correct URL scheme and adds even the port if differs from 80 (SCPP-1305).
Setting contrast via dummy web userinterface page, the contrast was not applied to the display. (SCPP-1377)
Making ONHOOK count when in virtual key state and wanting to cancel own outgoing call. (SCPP-1433)
Minibrowser text and menu rendering wasn’t working on two line displays (snom300, snom320). (SCPP-1461)
Fixed error shown on minibrowser triggered settings save. (SCPP-1456)
Added new setting transfer_on_hangup_non_pots to have no POTS behavior for using transfer on hangup. (SCPP-1451)
No longer ignoring ONHOOK when showing virtual keys. (SCPP-1361)
Playing ringer on login page fixed. (SCPP-1386)
Setting dim_timer is available for all phones except snom360 now.
The outgoing identity will be changed if an identity will be removed in phonemenu and it was selected as the current ougoing line. (SCPP-1450)
Fetch an URL if set in SoftkeyItem tag. (SCPP-1478)
Up-/Down key will work in minibrowser as well (snom300, snom320). (SCPP-1477)
LID
Fixing displaying of hebrew characters. (SCPP-1442)
VLAN
Made sure that ethernet port VLAN un-/tagging is initialized once in bootloader and stays like it while the whole system is starting up. This is important for a PC connected to the 2nd switch port (PC port) in order to not disturb the network connection while the phone starts (snom300, snom320, snom360, snom370). Is available with u-Boot version 1.1.3-v.
PROVISIONING
Increased provisioning retry counter from 1 to 5.
RTCP
BYE is now encrypted if in SRTCP. Also fixed BYE length. (SCPP-1333)
Fixed RTCP in conference mode (including SRTCP). (SCPP-1311)
SETTINGS
It is not possible anymore to provision the setting firmware_version. (SCPP-845)
Reregister was failing if line settings were changed in background via provisioning. (SCPP-1462)
Made sure that the setting value of ntp_refresh_timer is set between 60 seconds and max signed int, which is around 9 hours.
Setting time_24_format defaults to on now. (SCPP-1343)
SIP
Apply dialplan on reveived/missed calls. (SCPP-141)
Added hold inactive/sendonly option. (SCPP-812)
Do not get any stats for connections without RTP stream, e.g. MoH delivery. (SCPP-1357)
Don’t show anonymous if Privacy=id but P-Asserted-Identity is set. (SCPP-585)
Filter invalid packets no matter if they have a known Call-ID or not. (SCPP-1368)
Fixed negative expire timers after reregister and other subscription bugs. (SCPP-1430)
Fixing crash when unholding a party which we had connected to a MOH-Server. (SCPP-1350)
Added new setting sdp_version_check used for switching the DSP version check. (SCPP-1429)
No longer ignoring contact-field in subscription notifies. (SCPP-1431)
SDP Session-Attribute "a=" was not handled.
Send another ACK if we receive a second 2xx. (SCPP-832)
Fixed missing Eventlist Resubscribe on Notify indicating Subscription Terminated from Broadsoft. (SCPP-601)
DIRECTORY
Limiting space available for sort-criteria so that one sees which number will be dialed (snom300, snom320). (SCPP-1363)
Showing best string to identify an identity (eg. the display name) instead of (Identity 1, …) (snom300, snom320). (SCPP-1363)
Changing of sort order works again. (SCPP-1363)
Fixed nick name handling when adding a sub number to a single entry. (SCPP-1388)
Fixed that multi numbered records always claimed to have active identity set. (SCPP-1363)
Fixing provisioning. (SCPP-1391)
Huge file uploads with watchdog enabled no longer restart the phone. (SCPP-1409)
Removed bug that caused XCAP XML to loose contacts. (SCPP-1388)
Stop temporary creation of locally deleted directory records when they are found in XML from XCAP server. (SCPP-1388)
TR-69
Action GetParameterValues on Device. failed (snom300).
UPDATE
Create correct encoded proxy update URL (snom820, snomMP). (SCPP-1397)
WEB
Fixed showing photos from persons that have special characters in their name. (SCPP-1334)

8.2.24 Bugfix

  • When going to idle state, onhook command is now send to headset as well. (SCPP-432)
  • Retry DNS resolving several times also during provisioning. (SCPP-1316)
  • Press CANCEL key during number guessing will display the current input only, so you may dial this number (snom300, snom320). (SCPP-1338)
  • Solved cold boot hang issue (snom3xx). Bootup may last longer, but is more reliable.
  • Attended transfer was not working properly when using SRTP and G726-32.
  • Fixed crash on denying incoming call. (SCPP-163)
  • Webclient needs encoded URL credentials and path (snom8xx). (SCPP-1243)

8.2.23 Bugfix

  • Added setting mc_output_device to play PA media via speaker or headset. (SCPP-1264)
  • Restore original media stream if REFER initiated INVITE failed. (SCPP-1288)
  • Exit minibrowser when XML contains nothing usefull to display. (SCPP-892)
  • Made directory details of call partner accessible in ringing and calling screens (press directory button). (SCPP-1310)
  • Refresh display after changing setting Text Only Display on Soft Keys. (SCPP-1301)
  • Refresh fkeys in idle XML screen. (SCPP-1280)
  • Subscribe to those keys only, that are available. Ignore subscriptions for keys on extension keypads that are not plugged in. (SCPP-716)
  • Fixing first-digit LDAP lookup bug (SCPP-1041).
  • If no LDAP result entry was selected and dialing is started, phone shows enter number prompt. (SCPP-1306)
  • Removed global ringer setting ring_sound which is redundant and confusing as the ringer is taken from the line dependent setting user_ringer. (SCPP-1318)
  • Discard 401 challenge to REGISTER if call id is unknown.
  • Fixed handling of ringing/knocking call if all conference members hooked on. (SCPP-552)
  • Message retrieve was not properly working with 3CX. (SCPP-1307)

8.2.22 Bugfix

  • OCS: Fixed audio reception when using conferencing (snom820).
  • DTMF send improvements (snomMP). (SCPP-1273)
  • Apply dialplan when dialing missed or received records that only consist out of an URL (without display name). (SCPP-1284)
  • Fixed transparency handling for idle XML images (snom820).
  • After attended transfer, display shows state connected and no longer state onhold. (SCPP-1272)
  • Call forwarding set for a local identity will work with Asterisk now. (SCPP-1278)
  • Edit enums fixed. Scrolling to left is possible now (snom320). (SCPP-1267)
  • If keyboard lock is on, reset already typed in number if a digit is entered that do not match any emergeny number. (SCPP-1253)
  • Send busy when CWI is off, but not in general if phone is in state conference. (SCPP-1276)
  • Fixed feature of saving latest call records to flash: when list was full, new records were not saved. Bug resulted in only saving the oldest records.
  • Fixed fkeys provisioning via xml-subtrees which did not send out subscribtions.
  • Fixing how number guessing handles directory search (was still version 7 style that didn’t know of new directory attributes and multi-number records).
  • Fixed proper random seed generation (snom820, snomMP).
  • OCS: Presence subscription was not refreshed when contact list changed.
  • Fixed RE dialplan: Back reference to non-existing group may have produced junk, because previously captured groups were not cleared properly.
  • When an INVITE had been send out and a connection was established before (e.g. start hold) the DTMF payload type was used from the old connection. Now, the payload type is taken from the settings.
  • Allow to enter numbers with + via web UI.
  • Fixed synchronization with XCAP server.
  • Don’t ask for password during logout. (SCPP-1277)
  • Fixed switching between dropdown combobox and plain text field for pkeys (snom820).
  • Some early log messages were missing, as the loglevel was set too late.
  • An keyevent like F_CONFERENCE:meineconfURI@confserver.com can be set up again via web UI. (SCPP-1266)

8.2.21 Bugfix

  • DTMF keytones while dialing were not working. Now they are working in handset mode. Currently, we cannot support playing them in speaker mode as well (snom820). (SCPP-1159)
  • Virtual key state now correctly colors keys defined as buttons (activity and pickup color) (snom820). (SCPP-804)
  • Changed timezone for Korea from +8 to +9. (SCPP-1260)
  • Don’t process backspace if edit type is enum (sort options). (SCPP-1251)
  • Handle transfer hard key in state calling. (SCPP-1237)
  • Show holding or held-by members in conference. (SCPP-1103)
  • Show correct positioned SMS message on screen. (SCPP-557)
  • Call-Pick Up was not properly working. (SCPP-1238)
  • Saved more than 50% of parsing time by using new XML parser features.
  • Fixed indexing of buttons. (SCPP-804)
  • Improved performance due to avoiding unused messages. (SCPP-1227)
  • Write empty passwords instead of stars as password setting value. (SCPP-463)
  • Fixed session timer refresh with SIP Update method. (SCPP-1219)
  • On register responses select own contact with the help of optional instance id’s. (SCPP-1247)
  • Use display name of P-Asserted-Identity header uri’s on SIP responses. (SCPP-1189)
  • OCS: ICE negotiation blocked early media. (SCPP-1016)

8.2.20 Bugfix

  • Conferencing was unusable.
  • Call recording enabled again.
  • Fixed sticky photo bug (snom370). (SCPP-286)
  • Refresh XML idle screen when XML url has changed. (SCPP-936)
  • Delete related fkey settings of removed identity as well. (SCPP-442)
  • Going off hook with wireless headset will now take setting preselection_nr into account as well, like handset already does. (SCPP-248)
  • Setting up WIFI credentials was not working properly (snom820).

8.2.19 Bugfix

  • Fixed Auto Answer Indication (snomMP). (SCPP-1026)
  • Fixed listening to multicast streaming (snomMP). (SCPP-1185)
  • Reenabled missing call release notification when a call had been terminated even if setting release_sound was set to on. release_sound distinguishes now between on, off and off_when_terminating_calls. Replaced radio button with drop down on the web interface page. (SCPP-1006)
  • Deletion of single sub-numbers of multi-number directory record now possible. (SCPP-1192)
  • Don’t resend ring command if phone is already ringing even if there is more than one incomming call. (SCPP-972)
  • Indicate new voice-message via message-LED even during calls.
  • Digit input in idle state fixed. It’s possible to enter numbers or select an entry out of the add-menu with speeddial (snomMP). (SCPP-1216)
  • Pressing Record key in conference state terminates the recording line. (SCPP-1220)
  • Virtual key name lookup is working with full URIs. (SCPP-1094)
  • OCS states now available for fkeys (in virtual key-view and snom820 side screen) (snom820, snom870). (SCPP-1177)

8.2.18 Bugfix

  • Switch to speaker mode after going on hook in the states edit number or connected. (SCPP-988)
  • Codec type and TX-RX stats could not be displayed anymore during call at the display. (SCPP-1206)
  • Accept incoming calls with line keys in state conference. (SCPP-1131)
  • Accept transfer key in state transfer. (SCPP-798)
  • Add URI in calling lists even if registrar contains parameter. (SCPP-1039)
  • Clean paint area for title (snom370). (SCPP-1191)
  • Don’t handle key event F_LOGOFF_ALL if a line is connected or on hold. (SCPP-1203)
  • Handle the programmable keys in state settings as well. (SCPP-293)
  • Long numbers fit now into display (snom360). (SCPP-843)
  • New handling for incoming calls during conference (snomMP). (SCPP-753)
  • Added new setting transfer_on_hangup_with_starcode to allow transfering calls on hangup if one call was picked up with PBX starcode. (SCPP-906)
  • Added new setting dialnumber_us_format to switch off the U.S. dialnumber format. (SCPP-620)
  • No blinking status line if MWI is on (mailbox message received). State MWI is now matching snomMP style. (SCPP-1027)
  • Setting Use Speaker Key to Receive Calls is valid for headsetkey too now. (SCPP-1154)
  • Switch to state edit number if we got a 484 INCOMPLETE during overlap dialing. (SCPP-950)
  • Fixed memory leak when loading remote images (snom820). (SCPP-839)
  • Write settings again to flash filesystem when change was made via webUI.
  • Fixed sending inband DTMF (snom820). (SCPP-1150)
  • Call was sometimes not released properly. (SCPP-1207)
  • OCS: Don’t send any SUBSCRIBE or SERVICE requests while NTLM negotiation is in progress.
  • OCS: Limit number of presence subscriptions to those displayed or on a key.
  • OCS: Reregister as soon as SA expires.
  • OCS: Reset the TCP connection when the SA expires and reregister immediately.
  • Block TR69 authentication attempt for one minute when authentication has failed 5 times in series. (Sending 403 Forbidden instead.)
  • Intercept race conditions caused by the ACS if too many requests come in.

8.2.17 Bugfix

  • Fixed headset from ringing only once per incomming call to now every 3 seconds. (SCPP-416)
  • Fixed multicast handling (snom820). (SCPP-1075)
  • Fixed handling of huge and infinitive lease times. (SCPP-1173)
  • Don’t dial last LDAP result if number has changed and no LDAP result was found (snom300, snom320). (SCPP-1120)
  • Close "call stats" dialog if call is incoming. No call stats shown in state conference. (SCPP-1105)
  • Configured function keys work now in every state, if not set to type "Key Event". (SCPP-931)
  • Custom ring melodies above 300kb will be ignored. (SCPP-891)
  • Fixed using LDAP out of contact pool. (SCPP-1169)
  • Navigation keys actived for selecting entry out of LDAP search results in state edit number (snomMP). (SCPP-1145)
  • MWI changes to normal dialtone independently of GUI state. (SCPP-510)
  • Playing "Internal Ringer" set by preferences webpage if alert-info is set. (SCPP-1058)
  • Playing ringer of current line from webinterface. (SCPP-1019)
  • Redefined CANCEL key when user is asked whether he wants to use DHCP or not. Instead of switching DHCP off, the user is transferred back to the main settings. (SCPP-1181)
  • Repaired loss of internal adress book. (SCPP-1135)
  • Show call duration time (snom300, snom320). (SCPP-1138)
  • Show cursor in LDAP during editing search string only. (SCPP-670)
  • Transfer in state conference is now handled as in state connected. (SCPP-872)
  • Use solid backgound image for softkeys if setting text_softkey is enabled. (SCPP-871)
  • Not accepting content that is so huge that it could crash the phone. (SCPP-891)
  • TLS connections now also work when using an HTTP proxy. (SCPP-1047)
  • If the provisioning location was specified without scheme, skip the generated HTTP urls if one of the phone generated TFTP urls were successful. (SCPP-1008)
  • Limit writing settings to flash filesystem to a minimum. Just write after provisioning and right before reboot in order to get the phone freezing cured (new setting apply_settings_timeout can enable the old behavior again by setting it to 20; it is set to zero by default).
  • OCS: Stale SA caused phone to lose registration. (SCPP-1160)
  • TFTP client supports now subdirectories. (SCPP-477)
  • Save persistent data even on firmware update. (SCPP-1133)
  • Switch based port tagging was not working (snom820). (SCPP-1148)
  • Removed obsolete "Trusted Certificates" webpage. (SCPP-1129)

8.2.16 Bugfix

  • Add DSCP/TOS on RTP streams (snomMP). (SCPP-1092)
  • Fixed conference (one way audio in one leg) when one party was on GSM and the other on G.711u on asterisk (snom3x0). (SCPP-1113)
  • Volume down key interfered with a 1633 Hz DTMF tone.
  • Fixed duplicate pickup information in call pickup screen. (SCPP-1102)
  • Go offhook with wireless headset will dial number out of internal or LDAP directory. (SCPP-1072)
  • Added new setting cancel_conference to allow pressing Cancel key to disconnect all conference members. (SCPP-1069)
  • OCS: Contact list groups can not be switched (snomMP). (SCPP-1035)
  • Picking up a second call with speaker button wasn’t working.
  • Text scrolling wasn’t working properly (snom370). (SCPP-1060)
  • The edit button did not work, when creating a new entry in the directory.
  • MWI LED has to blink in all states.
  • OCS: Remove "Reboot warning" when setting up OCS account. (SCPP-1014)
  • OCS: Removed G.723 codec from default initialization in OCS edition (snom820).
  • OCS: Phone should not attempt to reregister as long as password prompt is active. (SCPP-1009)
  • Answering a call was failing and log said: "Failed to allocate any local SIP port!". (SCPP-1042)
  • Resubcriptions sometimes had an non-empty body.
  • Reregister asap if TCP/TLS register connection goes down. (SCPP-1109)
  • The webclient re-initiates a handshake when handling a challenge. It will never try to use an existing connection anymore.
  • Firmware update wasn’t using HTTP proxy when specified.

8.2.11 Bugfix

  • send DFKS subscriptions due to state transitions only to the active line
  • Number guessing minimum lenght will work only in state edit number in numeric edit mode.(SCPP-1030)

8.2.10 Bugfix

  • Device Feature Key Sync did not correctly handle Forward Events.
  • Crash when downgrading (or upgr.) to firmware versions with smaller adr.book size limit (maximum number of entries).

8.2.9 Bugfix

  • Fixed no ringing and no dial tone problem after opening a new call while holding the old one with the function key (in non G.711 codec call).

8.2.8 Bugfix

  • Fixed phone ringer silence on subsequent calls after using non G.711 codec in a call (snom3xx).
  • Fixed G.726 bad audio problem (snom3xx).
  • Fixed dimming timer setting dim_timer for snom820 backlight. (SCPP-332)
  • Added more flexible way of configuring IPv6 gateway.
  • Call Pickup did not work with multiple registrations. (SCPP-991)

8.2.7 Bugfix

  • Added standard Italian dialtone. (SCPP-697)
  • Fixed one way audio after ca. 10 minutes with SRTP (snomMP). (SCPP-866)
  • Fixed DTMF on/off switching issue with SRTP. (SCPP-880)
  • Added support for controlling microphone volume (snom820). (SCPP-681)
  • Fixed microphone muting during conferencing (snom820). (SCPP-255)
  • Acording to RFC, lease timer handles now 32bit wide timeouts in seconds. (SCPP-867)
  • Lease renew request wasn't RFC compliant. (SCPP-946)
  • General performance improvements and memory usage optimizations which fixed freezing behaviour as well. (SCPP-669, SCPP-838, SCPP-905)
  • Added display names and presence state information to contact list. (SCPP-879)
  • Dialing from web interface may create invalid URLs with some OCS dial plans. (SCPP-732)
  • No delay after key press in minibrowser. (SCPP-794)
  • Fixed transfer issue with no destination number. (SCPP-849)
  • Onhook will cancel call even if phone is in minibrowser state. (SCPP-751)
  • Restart keyboard lock timer after unlock. Apply keyboard lock settings from webUI. (SCPP-887)
  • Transfer key will work in state holding as well (snom300). (SCPP-935)
  • Transfer on onhook now works with picked up calls as well. (SCPP-632)
  • Update display if Detect Ethernet Cable Unplug is switched off. (SCPP-944)
  • Store missed call in caller list even when DND is active. (SCPP-938)
  • "Enhanced" data returned from LDAP were interfering with dial plan. (SCPP-842)
  • Display method setting will be applied and not only stored when coming in with a check-sync. (SCPP-619)
  • Only 4 identities are valid for snom300. Handle even old setting file with 12 identities without hanging. (SCPP-772)
  • The "!" setting flag wasn't working if user was changing a setting value back to default. (SCPP-890)
  • OCS: Redirect on REGISTER failed. (SCPP-901)
  • OCS: Attended transfer fails in certain scenarios. (SCPP-916)
  • OCS: Calling a phone makes user Available. (SCPP-913)
  • OCS: Dialplan conversion should drop blanks from pattern. (SCPP-912)
  • OCS: No Audio when both ends select TURN candidate. (SCPP-957)
  • OCS: Only first Identity goes back to Available, others stay Away. (SCPP-862)
  • Preference field in NAPTR record was misinterpreted as a weighting factor. (SCPP-945)
  • Stale nonce indication was not handled. Now phone evaluates the "stale" parameter in the WWW-Authenticate header. If it is set to true, phone will retry with the same credentials. (SCPP-930)
  • Contact address was not refreshed on re-SUBSCRIBE. (SCPP-923)
  • Fixed dirty host cache entries invoked by incoming ICMP packets (SCPP-895) and by UDP request timeout (SCPP-899). A phone using Proxy Failover due to dns naptr and with dirty host ttl configured adds now the failed server to the dirty host cache.
  • Fixed subscription if subscription target got new contact due to reboot. (SCPP-846)
  • Fixed a couple of Device Feature Key Synchronization Issues. (SCPP-271)
  • The index of a button message now addresses the parameter of a button function key rather than the number of the fkey. (SCPP-782)
  • Firmware update via HTTP(S) with credentials wasn't working (snom820, snomMP). (SCPP-918)
  • Provisionend firmware updates were not starting sometimes. (snom820, snomMP). (SCPP-922)
  • Made improvements to OCS Account Wizard. (SCPP-410)
  • HTTP proxy support of web client wasn't working properly (SCPP-542). Added new settings for HTTP proxy credentials: http_proxy_user, http_proxy_pass.
  • Show LCS Uptime and system load average on info.htm. (SCPP-396)
  • Show logout button even if setting ignore_security_warning is off.
  • Moved logout button to the left.
  • Showing logged out page after logging out. (SCPP-888)
  • WIFI Wasn't working properly for certain essids (snom820). (SCPP-840)

8.2.6 Bugfix

  • Fixed G.729 distorted audio and one way audio problems (snom3x0).
  • Decreasing Volume during call does not generate a sound anymore (snom820). (SCPP-752)
  • Clear area of status line for XML idle screen at given position else at default position (snom360, snom370). (SCPP-815)
  • Set edit mode to numeric for editing numbers if no text to be edited is already set. (SCPP-746)
  • Don't save passwords in exported settings files. Accept empty admin password after reading setting file. (SCPP-823)
  • Could not take call off hold when Shared Line is active identity. (SCPP-445)
  • Don't set mute after deflection to off. If deflection feature is disabled, transfer key does nothing. (SCPP-825)
  • Function "Play ringer remotely" was playing the ringer of identity X, but not the ringer X. (SCPP-811)
  • Stale 401 should be ignored. (SCPP-708)

8.2.5 Bugfix

  • Timezone setting: UP/Down key selects next timezone. Right/left key selects the next timezone group (one hour +/-) (snom300, snom320). (SCPP-781)
  • Don't scroll to next identity if an other than the current one was removed. (SCPP-816)
  • Enable audio device change from speaker to headset in holding state (snom300). (SCPP-674)
  • Authorization headers were appended endlessly to REGISTER messages when authorization scheme was not NTLM. (SCPP-783 rework)
  • Scroll to next identity if current identity was removed or show logon wizard if all identities were removed. (SCPP-621)
  • Aborting transfer if phone goes onhook. Send Re-INVITE and switch audio to speaker. (SCPP-667)
  • Call deflection was not working when destination was taken from a list such as dialed number or contacts. (SCPP-797)
  • Fixed G.726 bad audio quality. Added the RFC3551 byte packing order for G.726 codec (new line setting user_g726_packing_order). (SCPP-785)
  • 400 class response to a REFER was not handled. (SCPP-792)

8.2.4 Bugfix

  • If a call out of holding state is terminated goto terminate state first (e.g. play signal). (SCPP-757)
  • Phone did not always send out a SIP line seize message when function keys are configured as buttons. (SCPP-723, SCPP-756)
  • Fixed on/off switching of setting flood_tracing. (SCPP-779)
  • Accept KEY=TRANSFER also on snom300. (SCPP-764)
  • Fixed issue with remote RTP address update due to ICE (snomMP).(SCPP-749)
  • Call duration longer than an hour will be displayed with an h at it's end. (SCPP-767)

8.2.3 Bugfix

  • If the number of missed calls was greater than 9 the number was displayed backwards. (SCPP-740)
  • Use big font size in edit mode if Hebrew character mode is switched off (we do not support big Hebrew characters yet). (SCPP-738)
  • When one pressed the volume keys and used the soft keys to change the volume and you return to the idle screen, calls were canceled. (SCPP-737)
  • Fixed a couple of Hebrew display bugs.
  • Fixed issues which occured in edit mode.
  • Changed default character modes in the address book and in edit mode.
  • New softkey contactpool in states edit_number, transfer and hold to have quick access to all directories and call lists. (SCPP-728)
  • Fixed display of History-Info header. (SCPP-726)
  • The ext parameter was being removed from a tel URI by dial plan processing. (SCPP-595)
  • Show history-info (snom820). (SCPP-727)
  • Added more memory bins to avoid memory waste and increase memory usage efficiency. (SCPP-396)
  • Voice Quality Report (MetaSwitch) included wrong start time value.
  • VQM stats enabled again, they were temporarily removed before.
  • Fixed issue with no network connection at all (snom370). (SCPP-735)
  • Don't save magic password (consists out of asterisks) if http password is empty. (SCPP-741)

8.2.2 Bugfix

  • Fixed bug in word-wrapping routine (snom820).
  • Fixed entering password with multi-byte characters.
  • DTMF duration fixed for SIP-INFO. (SCPP-609)
  • Audio device icon fixed in holding state (snom370). (SCPP-508)
  • There was no functionality available for fkeys in holding state (snom320). (SCPP-677)
  • There was still an animation icon shown if ringer animation was disabled (snom820). (SCPP-694)
  • Extension key inoperative on shared line, when phone is off-hook. (SCPP-628)
  • Changing GUI language wasn't affecting soft key texts. (SCPP-704)
  • If a list of pickup calls appeared on the display and you choose one to pick up, the first call that came in was taken always.
  • GRUU contact header was enclosed in quotes. (SCPP-451)
  • Call pickup did not work correctly if display name was sent by the server.
  • Phone wasn't booting up if SIP OPTIONS messages were sent to it during boot up (snom820). (SCPP-702)
  • NTLM authentication failed when display name in From header contains a comma. (SCPP-651)
  • SIP UDP src port and sip port encoded in sip message is now equal (snom370). (SCPP-484)
  • Intercom feature signaled via "interkom=true" has been disabled. (SCPP-701)
  • Multicast paging was not working reliably (snom3x0). (SCPP-226)
  • Images of CANCEL, TICK and NAVI key are shown in 3xx style now on function key page (snom3x0). (SCPP-666)
  • Key events list of fast and line keys will offer CONFERENCE and RECORDING on function key page for 3x0 phones too (snom3x0). (SCPP-675)
  • Requeueing of failed provisioning URL was shortening the URL by one character on each attempt.
  • 0 is no valid vlan id, vlan init is ignoring it now. (SCPP-683)

8.2.1 Bugfix

  • Fixed cursor-position when editing IP's. (SCPP-428)
  • XML-idle-screen name of tag for font-color changed to "Color" (from "Font") (snom820).
  • Handle fkeys on released and not on pressed (snom370, snom820 and snomMP). (SCPP-565)
  • Do not accept IP-address with leading zeros in a subnet. (SCPP-534)
  • Fixed edit mode changing during enter number for call forwarding entered with softkey in idle state. (SCPP-563)
  • Redirect softkey implemented in edit number state, if accepting incoming call and later canceling it this call will then go back to idle state. (SCPP-604)
  • (Re-)start autodial timer (if enabled) only after key events and not on entering LDAP search. (SCPP-584)
  • Offhook will switch audio from speaker to handset and is not dependent on phone state. (SCPP-567)
  • Refresh idle screen after removing URL for idle-xml. (SCPP-568)
  • Refresh date after changing it's format. (SCPP-541)
  • Displayname (if set) will be used instead of number in line info (snom820). (SCPP-547)
  • Fixed wrapping of continuous text in minibrowser. (SCPP-551)
  • Refresh GUI after onhook when the phone is the state 'call holding' to change audio icon. (SCPP-509)
  • Softkeys for adressbook unified. Default edit mode is alphanumeric. Search is case insensitive. Softkey for changing edit mode only for Hebrew/Cyrillic enabled. (SCPP-607)
  • Pressing keys out of range of setting menu selection will be first or last entry but submenu will not be entered. (SCPP-625)
  • Same behavior of clearing a list or delete an entry like version 7.3 does. (SCPP-617)
  • Transfer on onhook will only connect one incoming and one outgoing call. (SCPP-632)
  • On LDAP search split a matching line into several lines if a member has more than one phone number. (SCPP-538
  • LDAP lookup for incoming calls displays only exact matching number. (SCPP-559)
  • Fixed displaying utf8 search results (snom320). (SCPP-556)
  • URI parameters were being stripped from contact in processing of a 302.
  • Re-INVITE from MOH server causes MOH stream to be redirected to the holding party. (SCPP-653)
  • Removed sending of spurious 482 message.
  • Always use a non-secure RTP connection for MOH. (SCPP-471)
  • Changed help dkey from F_HELP to F_SUPPORT. (SCPP-494)
  • Key events "Conference" and "Recording" are not longer available for soft keys on function keys page. (SCPP-602)
  • Overload option disabled, wasn't working anyway, but confusing provisioning.
  • Initializing of extension keypad fixed. (SCPP-614)

8.1.3 Bugfix

  • check-sync;reboot=false sometimes wasn't triggering setting reload from settings server (SCPP-515)
  • increased speed by optimizing text-prints (snom820)
  • The Re-register function was causing the phone to sometimes loose its registration
  • no longer using contact as refer-to header (SCPP-523)
  • URI scheme was not recognized when it is in caps
  • Key events Mute and Transfer are now available on function keys web interface page. (SCPP-558)
  • Minibrowser: Labled Softkeys fixed (snom820)
  • Added handling of RTCP-Remote header, so that in case a separate rtcp destination is given then that will be used. (SCPP-444)
  • limit speaker volume in case of dual speakers (snom820)
  • one can choose between two different wifi drivers (b/g and b/g/n) (snom820)

8.1.2 Bugfix

  • Fixed phone crash after deleting one of the phone's call list from entry detail view (snom320). (SCPP-458)
  • Fixed disabled ringer animation screen. (SCPP-437)
  • Consistent behaviour locking the keyboard. (SCPP-470)
  • Fixed showing guessed number (snom370). (SCPP-430)
  • Missed calls LED handling logic fixed. (SCPP-379)
  • Speed increased when reacting to keypresses or other events while showing xml-idle-screen (snom820).
  • No entry was added in the missed call history if call waiting was disabled. (SCPP-450)
  • Reorder characters if font is hebrew (snom820). (SCPP-390)
  • Play current user ringer during changing ringer volume. (SCPP-133)
  • Redraw XML-screen if active line changed. (SCPP-401)
  • Reset edit mode to numeric in transfer state. (SCPP-419)
  • Fixed timezone settings for Vladivostok and Tonga. (SCPP-420)
  • Fixed sticky login-screen. (SCPP-437)
  • Set all monitored LEDs to on after transfer. (SCPP-391)
  • Fixed maximum volume on speaker. Minimum volume level is 1 not 0. (SCPP-486)
  • Send reinvite after aborted Transfer as well as the line is "on hold". (SCPP-467)
  • Fixed call pickup if intercom is enabled. (SCPP-495)
  • Randomize request source port and DNS query id. (SCPP-479)
  • Fixed Speaker Volume Adjustment in Headset/Handset and Speaker Mode. (SCPP-480)
  • Fixed occasional one way audio problem when making a call by picking up the handset first (snom820). (SCPP-378)
  • Fixed oob DTMF detection (snom820). (SCPP-435)
  • A picture from CALL-INFO header in a provisonal 18x was never shown (snom370, snom820).
  • Transport parameter was dropped on redirected register.
  • Don't process subscribe packet if contact header is missing (could happen by an Asterisk bug). (SCPP-431)
  • Fixed rejection of anonymous calls. (SCPP-418)
  • Initialization was broken.
  • Fixed XML decoding. (SCPP-285)
  • By default answer after policy is set to "off". (SCPP-506)
  • Flash plugin didn't work with current Flash player releases due to new Flash security requirements. (SCPP-43)
  • TBook cvs import fixed. (SCPP-56)
  • WEB UI wasn't working with VLAN (snom820). (SCPP-348)
  • Added conversion of HTML special characters. (SCPP-395)

8.1.1 Bugfix

  • No Bugfixes

8.0.13 Bugfix

  • No Bugfixes

8.0.12 Bugfix

  • Return to idle by onhook in redial and directory when coming from edit. (SCPP-299)
  • No dialing through speaker key when in redial or directory and speaker already on.
  • Fixed sorting with/without title in wizard selection box for language, timezone and tone scheme (SCPP-302)

8.0.11 Bugfix

  • No bugfixes
Personal tools
Interoperability