Firmware/V8/Release Notes/Change Log V8

From Snom User Wiki

(Difference between revisions)
Jump to: navigation, search
Line 1: Line 1:
 +
__NOTOC__
==Change Log between 8.X and 7.3 branch==
==Change Log between 8.X and 7.3 branch==
{|{{TextLeftTable}}
{|{{TextLeftTable}}

Revision as of 15:02, 25 September 2009

Change Log between 8.X and 7.3 branch

Features

8.2.11 Features

No new features

8.2.10 Features

  • Call Agent ACD State Synchronization (SCPP-854)

8.2.9 Features

  • LDAP lookup when dialing a number now starts only when the typed in number has as many digits as defined with setting guess_start_length.
  • 820 now opens virtual key state automatically on activity, setting allowing that is on by default.

8.2.8 Features

8.2.7 Features

  • Added support for version 6 audio coefficients (snom3xx). Selecting the new room type "v6" leads to same volume behaviour as in version 6 releaeses. (SCPP-889)
  • Added support for options 132 vlan_id (802.1q) and 133 vlan_qos (802.1p). They can even be tunneled via option 43. (SCPP-859)
  • Added OCS support for presence key. (SCPP-641)
  • Minibrowser can now be invoked using HTTP. (SCPP-238)
  • Minibrowser pages can now trigger LEDs. (SCPP-240)
  • Text prediction based search on LDAP directory. (SCPP-409)
  • Transfer on onhook is now available for blind transfer, too. (SCPP-810)
  • Added additional STUN requests (RTPv0) in the beginning of a call for server type Teles. (SCPP-671)
  • Added OID to show CPU load average of last 1min., 5min. and 15min.
  • Added OID to show used, free, cached, lid (phone lowlevel app.) and lcs (phone highlevel app.) memory usage.
  • Added OID to show application uptime.
  • Added OID to show the number of incoming and outgoing messages.
  • Added OID to show the number of open connections.
  • Added OID to show the number of timeouts running.
  • Added OID to show the number of active subscriptions.
  • OCS: The User-Agent header now includes information whether the software type is OCS or not.
  • Added intermediate certificate phone2 that signs the phone certificate. The SSL certificate message encapsulates both certificates.
  • Added support of keys up to 4096 bits in size (client and server side).
  • One can upload and replace files in bmp (snom370-VPN, snom820) and html (snom370-VPN, snom820, snomMP) directories. (SCPP-873)
  • Removed second pair of HTTP user/pwd credentials for standard user. adminmode/admin_mode_pass is enough.(SCPP-679)

8.2.6 Features

No new features

8.2.5 Features

No new features

8.2.4 Features

  • LDAP result sets are sorted now. (SCPP-747)
  • VQM reporting is no longer restricted to MetaSwitch server type anymore.
  • To reduce memory wasting for SIP trace and system log we added a new setting sip_tracing to be able to switch off SIP tracing at all as well as the new loglevel -1 to switch off logging. (SCPP-779)

8.2.3 Features

  • Added Hungarian language support.
  • Enbabled EHS support (snom300). (SCPP-612)

8.2.3 Features

  • Added Hungarian language support.
  • Enbabled EHS support (snom300). (SCPP-612)

8.2.2 Features

  • Securing communiction with random message id. New CSTA messages for set and get settings, xml push and firewall test. (SCPP-648)
  • Added option for very fast LED blink rate on ringing (new setting blink_very_fast).
  • Added keyboard lock after timeout (new setting keyboard_lock_timeout). (SCPP-676)
  • Enhanced language support for Portugues and Hebrew.
  • Added language support for Estonian and Hungarian.
  • On challenged web client requests, user gets asked for username and password at the display. This may be used to login a phone user. (SCPP-699)
  • Phone can now upload files into tmpfs and replay them as MOH. (SCPP-696)
  • Parameters like "$ip_addr" as part of the URL stored in for example setting_server are replaced with it's values before the URL is used for provisioning requests. This is the same syntax like for the Action URLs. (SCPP-698)
  • Show login page after logout. (SCPP-678)

8.2.1 Features

  • Enlarged adressbook with entries for first and family name, email, company, birthday, etc. (snom820 and snomMP). (SCPP-522)
  • Hebrew and Cyrillic character editing support.
  • Call can be started out of call lists with wireless headset as well now. (SCPP-351)
  • VQM reporting over SIP, according to draft-ietf-sipping-rtcp-summary using SIP PUBLISH.
  • Added new setting prioritise_pbx_number_lookup to ignore PBX transmitted user name for incoming calls in order to enable correct lookup in internal LDAP address book. (SCPP-131)
  • Added support for RTP listening on multiple multicast sockets.
  • Added new setting empty_tls_client_cert to use empty client certificate in TLS connections. For OCS the setting defaults to on, otherwise to off. (SCPP-597)

8.1.3 Features

  • Call Pick-up: if the first character in the string following the "|" is a "!" the rest is dialed out unaltered
  • Added support for new check-sync option: check-sync;reboot=reregister-only

8.1.2 Features

  • Added new action release to clear previously seized button line.
  • Handle header "Remote-Party-ID" for Cisco Call Manager (CCM). (SCPP-412)
  • New setting user_additional_supported_header for "additional supported headers". (SCPP-413)
  • Added key_dtmf to initiate key events with DTMF tones remotely via http://phoneIP/command.htm?key_dtmf=KEYEVENT. (SCPP-94)
  • PC port can be disabled via new eth_pc option off.

8.1.1 Features

No new features

8.0.13 Features

No new features

8.0.12 Features

  • Complete system-info is now in settings (Phone_GUI). The Help-key on the phone ("?") now shows the support message on the display.

8.0.11 Features

  • redirection with function key type BLF
  • split timezone -10:USA into -10:USA(Hawaii) and 2-10:USA(Aleutian Islands) due to different DSTs
  • a logging entry is created if an Action URL could not be accessed
  • Device Feature Key Synchronization Broadsoft
  • Broadsoft directory access via OCI-P
Bugfix

8.2.11 Bugfix

  • send DFKS subscriptions due to state transitions only to the active line
  • Number guessing minimum lenght will work only in state edit number in numeric edit mode.(SCPP-1030)

8.2.10 Bugfix

  • Device Feature Key Sync did not correctly handle Forward Events.
  • Crash when downgrading (or upgr.) to firmware versions with smaller adr.book size limit (maximum number of entries).

8.2.9 Bugfix

  • Fixed no ringing and no dial tone problem after opening a new call while holding the old one with the function key (in non G.711 codec call).

8.2.8 Bugfix

  • Fixed phone ringer silence on subsequent calls after using non G.711 codec in a call (snom3xx).
  • Fixed G.726 bad audio problem (snom3xx).
  • Fixed dimming timer setting dim_timer for snom820 backlight. (SCPP-332)
  • Added more flexible way of configuring IPv6 gateway.
  • Call Pickup did not work with multiple registrations. (SCPP-991)

8.2.7 Bugfix

  • Added standard Italian dialtone. (SCPP-697)
  • Fixed one way audio after ca. 10 minutes with SRTP (snomMP). (SCPP-866)
  • Fixed DTMF on/off switching issue with SRTP. (SCPP-880)
  • Added support for controlling microphone volume (snom820). (SCPP-681)
  • Fixed microphone muting during conferencing (snom820). (SCPP-255)
  • Acording to RFC, lease timer handles now 32bit wide timeouts in seconds. (SCPP-867)
  • Lease renew request wasn't RFC compliant. (SCPP-946)
  • General performance improvements and memory usage optimizations which fixed freezing behaviour as well. (SCPP-669, SCPP-838, SCPP-905)
  • Added display names and presence state information to contact list. (SCPP-879)
  • Dialing from web interface may create invalid URLs with some OCS dial plans. (SCPP-732)
  • No delay after key press in minibrowser. (SCPP-794)
  • Fixed transfer issue with no destination number. (SCPP-849)
  • Onhook will cancel call even if phone is in minibrowser state. (SCPP-751)
  • Restart keyboard lock timer after unlock. Apply keyboard lock settings from webUI. (SCPP-887)
  • Transfer key will work in state holding as well (snom300). (SCPP-935)
  • Transfer on onhook now works with picked up calls as well. (SCPP-632)
  • Update display if Detect Ethernet Cable Unplug is switched off. (SCPP-944)
  • Store missed call in caller list even when DND is active. (SCPP-938)
  • "Enhanced" data returned from LDAP were interfering with dial plan. (SCPP-842)
  • Display method setting will be applied and not only stored when coming in with a check-sync. (SCPP-619)
  • Only 4 identities are valid for snom300. Handle even old setting file with 12 identities without hanging. (SCPP-772)
  • The "!" setting flag wasn't working if user was changing a setting value back to default. (SCPP-890)
  • OCS: Redirect on REGISTER failed. (SCPP-901)
  • OCS: Attended transfer fails in certain scenarios. (SCPP-916)
  • OCS: Calling a phone makes user Available. (SCPP-913)
  • OCS: Dialplan conversion should drop blanks from pattern. (SCPP-912)
  • OCS: No Audio when both ends select TURN candidate. (SCPP-957)
  • OCS: Only first Identity goes back to Available, others stay Away. (SCPP-862)
  • Preference field in NAPTR record was misinterpreted as a weighting factor. (SCPP-945)
  • Stale nonce indication was not handled. Now phone evaluates the "stale" parameter in the WWW-Authenticate header. If it is set to true, phone will retry with the same credentials. (SCPP-930)
  • Contact address was not refreshed on re-SUBSCRIBE. (SCPP-923)
  • Fixed dirty host cache entries invoked by incoming ICMP packets (SCPP-895) and by UDP request timeout (SCPP-899). A phone using Proxy Failover due to dns naptr and with dirty host ttl configured adds now the failed server to the dirty host cache.
  • Fixed subscription if subscription target got new contact due to reboot. (SCPP-846)
  • Fixed a couple of Device Feature Key Synchronization Issues. (SCPP-271)
  • The index of a button message now addresses the parameter of a button function key rather than the number of the fkey. (SCPP-782)
  • Firmware update via HTTP(S) with credentials wasn't working (snom820, snomMP). (SCPP-918)
  • Provisionend firmware updates were not starting sometimes. (snom820, snomMP). (SCPP-922)
  • Made improvements to OCS Account Wizard. (SCPP-410)
  • HTTP proxy support of web client wasn't working properly (SCPP-542). Added new settings for HTTP proxy credentials: http_proxy_user, http_proxy_pass.
  • Show LCS Uptime and system load average on info.htm. (SCPP-396)
  • Show logout button even if setting ignore_security_warning is off.
  • Moved logout button to the left.
  • Showing logged out page after logging out. (SCPP-888)
  • WIFI Wasn't working properly for certain essids (snom820). (SCPP-840)

8.2.6 Bugfix

  • Fixed G.729 distorted audio and one way audio problems (snom3x0).
  • Decreasing Volume during call does not generate a sound anymore (snom820). (SCPP-752)
  • Clear area of status line for XML idle screen at given position else at default position (snom360, snom370). (SCPP-815)
  • Set edit mode to numeric for editing numbers if no text to be edited is already set. (SCPP-746)
  • Don't save passwords in exported settings files. Accept empty admin password after reading setting file. (SCPP-823)
  • Could not take call off hold when Shared Line is active identity. (SCPP-445)
  • Don't set mute after deflection to off. If deflection feature is disabled, transfer key does nothing. (SCPP-825)
  • Function "Play ringer remotely" was playing the ringer of identity X, but not the ringer X. (SCPP-811)
  • Stale 401 should be ignored. (SCPP-708)

8.2.5 Bugfix

  • Timezone setting: UP/Down key selects next timezone. Right/left key selects the next timezone group (one hour +/-) (snom300, snom320). (SCPP-781)
  • Don't scroll to next identity if an other than the current one was removed. (SCPP-816)
  • Enable audio device change from speaker to headset in holding state (snom300). (SCPP-674)
  • Authorization headers were appended endlessly to REGISTER messages when authorization scheme was not NTLM. (SCPP-783 rework)
  • Scroll to next identity if current identity was removed or show logon wizard if all identities were removed. (SCPP-621)
  • Aborting transfer if phone goes onhook. Send Re-INVITE and switch audio to speaker. (SCPP-667)
  • Call deflection was not working when destination was taken from a list such as dialed number or contacts. (SCPP-797)
  • Fixed G.726 bad audio quality. Added the RFC3551 byte packing order for G.726 codec (new line setting user_g726_packing_order). (SCPP-785)
  • 400 class response to a REFER was not handled. (SCPP-792)

8.2.4 Bugfix

  • If a call out of holding state is terminated goto terminate state first (e.g. play signal). (SCPP-757)
  • Phone did not always send out a SIP line seize message when function keys are configured as buttons. (SCPP-723, SCPP-756)
  • Fixed on/off switching of setting flood_tracing. (SCPP-779)
  • Accept KEY=TRANSFER also on snom300. (SCPP-764)
  • Fixed issue with remote RTP address update due to ICE (snomMP).(SCPP-749)
  • Call duration longer than an hour will be displayed with an h at it's end. (SCPP-767)

8.2.3 Bugfix

  • If the number of missed calls was greater than 9 the number was displayed backwards. (SCPP-740)
  • Use big font size in edit mode if Hebrew character mode is switched off (we do not support big Hebrew characters yet). (SCPP-738)
  • When one pressed the volume keys and used the soft keys to change the volume and you return to the idle screen, calls were canceled. (SCPP-737)
  • Fixed a couple of Hebrew display bugs.
  • Fixed issues which occured in edit mode.
  • Changed default character modes in the address book and in edit mode.
  • New softkey contactpool in states edit_number, transfer and hold to have quick access to all directories and call lists. (SCPP-728)
  • Fixed display of History-Info header. (SCPP-726)
  • The ext parameter was being removed from a tel URI by dial plan processing. (SCPP-595)
  • Show history-info (snom820). (SCPP-727)
  • Added more memory bins to avoid memory waste and increase memory usage efficiency. (SCPP-396)
  • Voice Quality Report (MetaSwitch) included wrong start time value.
  • VQM stats enabled again, they were temporarily removed before.
  • Fixed issue with no network connection at all (snom370). (SCPP-735)
  • Don't save magic password (consists out of asterisks) if http password is empty. (SCPP-741)

8.2.2 Bugfix

  • Fixed bug in word-wrapping routine (snom820).
  • Fixed entering password with multi-byte characters.
  • DTMF duration fixed for SIP-INFO. (SCPP-609)
  • Audio device icon fixed in holding state (snom370). (SCPP-508)
  • There was no functionality available for fkeys in holding state (snom320). (SCPP-677)
  • There was still an animation icon shown if ringer animation was disabled (snom820). (SCPP-694)
  • Extension key inoperative on shared line, when phone is off-hook. (SCPP-628)
  • Changing GUI language wasn't affecting soft key texts. (SCPP-704)
  • If a list of pickup calls appeared on the display and you choose one to pick up, the first call that came in was taken always.
  • GRUU contact header was enclosed in quotes. (SCPP-451)
  • Call pickup did not work correctly if display name was sent by the server.
  • Phone wasn't booting up if SIP OPTIONS messages were sent to it during boot up (snom820). (SCPP-702)
  • NTLM authentication failed when display name in From header contains a comma. (SCPP-651)
  • SIP UDP src port and sip port encoded in sip message is now equal (snom370). (SCPP-484)
  • Intercom feature signaled via "interkom=true" has been disabled. (SCPP-701)
  • Multicast paging was not working reliably (snom3x0). (SCPP-226)
  • Images of CANCEL, TICK and NAVI key are shown in 3xx style now on function key page (snom3x0). (SCPP-666)
  • Key events list of fast and line keys will offer CONFERENCE and RECORDING on function key page for 3x0 phones too (snom3x0). (SCPP-675)
  • Requeueing of failed provisioning URL was shortening the URL by one character on each attempt.
  • 0 is no valid vlan id, vlan init is ignoring it now. (SCPP-683)

8.2.1 Bugfix

  • Fixed cursor-position when editing IP's. (SCPP-428)
  • XML-idle-screen name of tag for font-color changed to "Color" (from "Font") (snom820).
  • Handle fkeys on released and not on pressed (snom370, snom820 and snomMP). (SCPP-565)
  • Do not accept IP-address with leading zeros in a subnet. (SCPP-534)
  • Fixed edit mode changing during enter number for call forwarding entered with softkey in idle state. (SCPP-563)
  • Redirect softkey implemented in edit number state, if accepting incoming call and later canceling it this call will then go back to idle state. (SCPP-604)
  • (Re-)start autodial timer (if enabled) only after key events and not on entering LDAP search. (SCPP-584)
  • Offhook will switch audio from speaker to handset and is not dependent on phone state. (SCPP-567)
  • Refresh idle screen after removing URL for idle-xml. (SCPP-568)
  • Refresh date after changing it's format. (SCPP-541)
  • Displayname (if set) will be used instead of number in line info (snom820). (SCPP-547)
  • Fixed wrapping of continuous text in minibrowser. (SCPP-551)
  • Refresh GUI after onhook when the phone is the state 'call holding' to change audio icon. (SCPP-509)
  • Softkeys for adressbook unified. Default edit mode is alphanumeric. Search is case insensitive. Softkey for changing edit mode only for Hebrew/Cyrillic enabled. (SCPP-607)
  • Pressing keys out of range of setting menu selection will be first or last entry but submenu will not be entered. (SCPP-625)
  • Same behavior of clearing a list or delete an entry like version 7.3 does. (SCPP-617)
  • Transfer on onhook will only connect one incoming and one outgoing call. (SCPP-632)
  • On LDAP search split a matching line into several lines if a member has more than one phone number. (SCPP-538
  • LDAP lookup for incoming calls displays only exact matching number. (SCPP-559)
  • Fixed displaying utf8 search results (snom320). (SCPP-556)
  • URI parameters were being stripped from contact in processing of a 302.
  • Re-INVITE from MOH server causes MOH stream to be redirected to the holding party. (SCPP-653)
  • Removed sending of spurious 482 message.
  • Always use a non-secure RTP connection for MOH. (SCPP-471)
  • Changed help dkey from F_HELP to F_SUPPORT. (SCPP-494)
  • Key events "Conference" and "Recording" are not longer available for soft keys on function keys page. (SCPP-602)
  • Overload option disabled, wasn't working anyway, but confusing provisioning.
  • Initializing of extension keypad fixed. (SCPP-614)

8.1.3 Bugfix

  • check-sync;reboot=false sometimes wasn't triggering setting reload from settings server (SCPP-515)
  • increased speed by optimizing text-prints (snom820)
  • The Re-register function was causing the phone to sometimes loose its registration
  • no longer using contact as refer-to header (SCPP-523)
  • URI scheme was not recognized when it is in caps
  • Key events Mute and Transfer are now available on function keys web interface page. (SCPP-558)
  • Minibrowser: Labled Softkeys fixed (snom820)
  • Added handling of RTCP-Remote header, so that in case a separate rtcp destination is given then that will be used. (SCPP-444)
  • limit speaker volume in case of dual speakers (snom820)
  • one can choose between two different wifi drivers (b/g and b/g/n) (snom820)

8.1.2 Bugfix

  • Fixed phone crash after deleting one of the phone's call list from entry detail view (snom320). (SCPP-458)
  • Fixed disabled ringer animation screen. (SCPP-437)
  • Consistent behaviour locking the keyboard. (SCPP-470)
  • Fixed showing guessed number (snom370). (SCPP-430)
  • Missed calls LED handling logic fixed. (SCPP-379)
  • Speed increased when reacting to keypresses or other events while showing xml-idle-screen (snom820).
  • No entry was added in the missed call history if call waiting was disabled. (SCPP-450)
  • Reorder characters if font is hebrew (snom820). (SCPP-390)
  • Play current user ringer during changing ringer volume. (SCPP-133)
  • Redraw XML-screen if active line changed. (SCPP-401)
  • Reset edit mode to numeric in transfer state. (SCPP-419)
  • Fixed timezone settings for Vladivostok and Tonga. (SCPP-420)
  • Fixed sticky login-screen. (SCPP-437)
  • Set all monitored LEDs to on after transfer. (SCPP-391)
  • Fixed maximum volume on speaker. Minimum volume level is 1 not 0. (SCPP-486)
  • Send reinvite after aborted Transfer as well as the line is "on hold". (SCPP-467)
  • Fixed call pickup if intercom is enabled. (SCPP-495)
  • Randomize request source port and DNS query id. (SCPP-479)
  • Fixed Speaker Volume Adjustment in Headset/Handset and Speaker Mode. (SCPP-480)
  • Fixed occasional one way audio problem when making a call by picking up the handset first (snom820). (SCPP-378)
  • Fixed oob DTMF detection (snom820). (SCPP-435)
  • A picture from CALL-INFO header in a provisonal 18x was never shown (snom370, snom820).
  • Transport parameter was dropped on redirected register.
  • Don't process subscribe packet if contact header is missing (could happen by an Asterisk bug). (SCPP-431)
  • Fixed rejection of anonymous calls. (SCPP-418)
  • Initialization was broken.
  • Fixed XML decoding. (SCPP-285)
  • By default answer after policy is set to "off". (SCPP-506)
  • Flash plugin didn't work with current Flash player releases due to new Flash security requirements. (SCPP-43)
  • TBook cvs import fixed. (SCPP-56)
  • WEB UI wasn't working with VLAN (snom820). (SCPP-348)
  • Added conversion of HTML special characters. (SCPP-395)

8.1.1 Bugfix

  • No Bugfixes

8.0.13 Bugfix

  • No Bugfixes

8.0.12 Bugfix

  • Return to idle by onhook in redial and directory when coming from edit. (SCPP-299)
  • No dialing through speaker key when in redial or directory and speaker already on.
  • Fixed sorting with/without title in wizard selection box for language, timezone and tone scheme (SCPP-302)

8.0.11 Bugfix

  • No bugfixes
Personal tools
Interoperability