Firmware/V8/Release Notes/8.7.4.1

From Snom User Wiki

< Firmware | V8 | Release Notes
Revision as of 13:58, 15 March 2013 by Madigan (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

8.7.4.1

Release Date

not released

Changed Behavior

n/a

Features

8.7.4.1 New Features

AUDIO
SCPP-3719: Implement local music on hold, which should be sent from the phone itself. How To enable and configure local MoH
SCPP-4069: new setting to configure in which call states the phone should play call waiting indication when a new call comes in: call_states_when_knocking
NETWORK
SCPP-3991: Option to have only file names instead of complete URLs in redirected HTTP URLs
SCPP-3990: IPV4 conflict detection is now VLAN aware
SCPP-2704: phone should not ignore HTTP 302 response instead make a new request to the provided location
SCPP-2862: IP address conflict check on DHCP an static IP
SECURITY
SCPP-3977: screen.bmp and alike should only be accessible in Admin mode
SCPP-3519: Empty TLS certificate option needs to be split for HTTPs and SIPs
WUI
SCPP-3940: Add Keyboard lock information to state_of_gui.htm
SCPP-3755: Provide LED status information in web interface
  • New section LEDS is appended to the end of the state_of_gui.htm page. The first row shows the title of the fields (number, frequency, and colour). Fields are separated by a blank.
SCPP-3745: Provide state of identities and lines in web interface
  • New page state_of_identity.htm providing information about identities and active lines. First row in each section shows the title of the fields. Fields are delimited with tabs.
SCPP-3737: Long key press via web interface
  • Enhancement of command.htm?key=... according to the following syntax: command.htm?key=<key>[,<long_press_timeout_ms[,pause_after_key_ms]]
  • Default long key press time out is set to 250 ms
SCPP-3758: Force idle state in web interface
  • command.htm?FORCEIDLE=yes will put the phone in idle state regardless of how many calls are active and if the phone is currently inside a settings menu
SCPP-2871: Advanced time out handling in webclient
SCPP-2956: uaCSTA enhancements to improve Estos interoperability
SCPP-3162: when removing SIP identity, also all identity related settings are being removed
SETTINGS
SCPP-3856: change obsolete setting values (e.g. F_R) on the fly, so customers don't need to fix their provisioning
SCPP-3879: changed time zone values for Moscow (RUS) to permanent DST
PUI
SCPP-3843: Reintroduce menu option to configure function keys using phone PUI
SCPP-3302: Scrolling of long Caller IDs
SCPP-3321: Allow all XML defined buttons to display a custom label
SCPP-3631: Pairing of phone with snom Vision
SCPP-3630: Hot desking support using snom Vision controlled by the phone
SCPP-3934: Allow to control LED-Behaviour of freely programmable function keys for any type
  • The LED behaviour for freely programmable function keys is now configurable for old-style (non XML) configurations as well. The default-values of the led_..-settings have changed. If old provisioning values are used, the LED's will not light as expected. Upon update to the version containing this new feature, the corresponding led..-settings will get overwritten with new defaults (all changes previously applied will be lost).
SCPP-3900: Added additional entries in Identity sub menu while phone runs in user mode:
  • Outgoing Identity
  • Reregister User
  • Call Voicemail
SCPP-3919: added possibility to toggle between call lists (missed/received/dialled) with LEFT/RIGHT keys on non-character display phones (all except Snom300 and Snom320)
HEADSET
SCPP-3842: Implementation of GN Netcom USB Headsets Specs
XML BROWSER
SCPP-3803: Improve minibrowser history management
SCPP-1492: new new XML tag for DTMF control added
LANGUAGE
SCPP-3763: Swedish language files updated
LDAP
SCPP-1455: New setting ldap_over_tls to enable LDAP over TLS
SIP
SCPP-2201: AOC Indication in 183 Response
Bugfix

8.7.4.1 Bugfixes

AUDIO
SCPP-4042: No audio in the next calls after connect with false codec in SDP of "200 OK"
SCPP-4040: When the phone plays a dial tone on handset/headset and the phone goes onhook the dial tone can be heard for a short period on the speaker.
SCPP-4008: VAD/CNG not working with G.729AB on snom821/870
SCPP-3980: snom760 shows an audio artifact every 5 second in certain environments when RTCP packet are received
SCPP-3952: Pressing +SPKR key in handset mode (change to open listening mode) mutes the Handset speaker.
SCPP-3887: PA1 does not play ringer, when Auto answer has been switched off
SCPP-3867: Ringer tone in Handset if handset was not hung up after previous connection
SCPP-3850: constant beep noise after call deflection (snom 320 only)
SCPP-3751: Phone sends a creaking noise after redial is accepted (snom 710 only)
SCPP-3740: The first DTMF tone on a snom 821 using tone schemes like USA, UK, AUS is missing when the phone is in idle and the speaker is used (handset is not used)
SCPP-3707: BUSY signal played out in speaker mode even though handset or headset is selected
SCPP-3627: Snom821/870 use outband DTMF in a call, although inband is negotiated
SCPP-3592: The first button pressed while trying to dial a number with German tone scheme is always heard (snom 8xx only)
SCPP-3588: DTMF Outband SIP INFO: key tones for "star" (*) is not working any more
SCPP-3422: Phone sends 180 Ringing too late
SCPP-3263: Phone plays ringback tone if 183 Session in Progress is received without SDP - even if there was no 180 Ringing
SCPP-2570: Multicast doesn't work after a call is received
SCPP-4076: after a few minutes of call audio stops working and then after hanging up no further calls can be made
SCPP-3778: rtp_early_media_ring_fallback seems not to work
SCPP-3732: Paging not working if Multicast Listening is activated at the same time
SCPP-3606: No synthesizer sound output on snom720/760 after dialing a not existent number on UC account
SCPP-3819: Lync: CN (Comfort Noise) is not played if snom receives CN RTP packets
SCPP-3788: Lync: snom phone stops ringing after approximately 2 seconds and there is no audio between snom and Kirk headset (Polycom)
SCPP-4069: No ringing during attended transfer on incoming call. This is a call waiting scenario, so Call Waiting should be indicated
SCPP-3828: Phone doesn't start ringing when a 2nd incoming call is already waiting and the 1st call is terminated by going on-hook
UPDATE
SCPP-3810: extension key issues dialog-subscription although server type is Broadsoft
SCPP-3482: If a software update fails, the firmware status stays untouched and prevents further updates using the same version
SIP
SCPP-3497: Phone reboot on missing SDP m lines
SCPP-635: Caller ID Update via SIP INFO does not work as expected
SCPP-4077: cannot make simple conference on Teles server
SCPP-4002: snom 720 locking up in local HOLD
SCPP-3978: Incoming INVITE with Require: 100rel, but without Supported: 100rel header should trigger PRACK flow
SCPP-2070: Incorrect Caller ID after call pickup
SCPP-3777: missing SDP offer on the first response to an incoming INVITE with or without SDP
SCPP-4106: Call on hold is transferred to itself when call_join_xfer is activated
SCPP-3706: Call Completion doesn't work consistently
SCPP-3839: Phone shows HOLD state even when HOLD Request was rejected / Unhold not possible (Broadsoft)
SCPP-3776: after multiple HOLD/UNHOLDS phone sends sendonly instead of recvonly
SCPP-3549: UPDATE messages are answered with 500 Server internal error
SCPP-3750: When doing attended transfer, REFER is sent to C instead of A
SCPP-3748: Park+Orbit not working. Call can be transferred but not retrieved
SCPP-3008: Hold not working if holding party is anonymous
SCPP-3232: lost REGISTER after INVITE with RFC 2543 Syntax
SCPP-3595: Incorrect handling of SIP Session Timer (RFC4028)
SCPP-3545: Connected Line Presentation Update after Call Forward - phone does not answer 200 OK with ACK (Broadsoft)
SCPP-3524: SCA - phone sends UNSUBSCRIBE after unsuccessful SUBSCRIBE (SIP 480) and LED stays on (Broadsoft)
SCPP-3518: AOC-D - Total charge in last 200 OK not presented in PUI if phone hangs up (Broadsoft)
SCPP-3506: Session Audit - phone does not send SIP 481 (Call Leg) after power cut (Broadsoft)
SCPP-3481: SCA - Call Info Public Hold / Bridging is not working (Broadsoft)
SCPP-3840: Timer Support - phone adds required header even when not necessary / not advised (Broadsoft)
SECURITY
SCPP-3911: only up to 64 HTTPs web client requests are possible
SCPP-3806: VPN isn't working (snom 710 only)
SCPP-3639: Access of settings is independent of user or admin mode
SCPP-3622: Could not register via TLS with Lync Server
PROVISIONING
SCPP-4027: cannot provision with tftp:/hostname
SCPP-4004: Function key assignment not updated on settings sync (no subscriptions being sent out)
SCPP-3974: phone retries to provision several times and then says Provisioning failed even though provisioning succeeds
SCPP-3971: Configured provisioning_order not being followed properly (after successful provisioning phone should start and don't send additional requests)
SCPP-3959: when provisioning with DHCP option 66, phone still tries to get snom300-firmware.htm from provisioning.snom.com
SCPP-3921: Provisioning server failed being displayed although DHCP provisioning was successful
SCPP-3898: Provisioning server failed being displayed although provisioning is disabled
SCPP-3871: Cancelling provisioning request results in incomplete error message
SCPP-3804: phone queries wrong address if sub folders in provisioning address (Broadsoft)
SCPP-3800: Provisioning through PnP does not work in VLAN environment
SCPP-3725: provisioning request can't be cancelled if server is not reachable
SCPP-3657: PnP does not work, phone replies with 404 to NOTIFY
SCPP-3608: Reboot loop or failing update if making update via provisioned ASCII-text-based setting file
SCPP-3551: Provisioning fails and result in endless loop when HTTP client and HTTP Client password are being used
SCPP-3479: phone doesn't restart if Firmware download server is not available
PUI
SCPP-3654: Redial list bug after calling a phone which was on DND (snom 360 only)
SCPP-3538: Picked up call to extension is displayed in Dialled instead of Received
SCPP-4109: Blind transfer results in a success message with too much information (SIP URI, paramters etc.)
SCPP-4088: typo in admin password can not be corrected when trying to reset the phone (snom 320 only)
SCPP-3587: snom720 does not correctly display incoming desktop messages
SCPP-3586: If the internal address book has a lot of entries, the SIP responses of the phone are delayed
SCPP-4003: DFKS: phone crashes when using ACD feature (Broadsoft)
SCPP-2579: XML Idle Screen - Always shows Digital Clock
SCPP-2823: Hebrew texts are not written right to left on PUI
SCPP-3183: snom 821 freezes after being a long time in idle state
SCPP-3268: Lync: ABS search shows "no results" for several seconds before the results are actually shown
SCPP-3335: Lock symbol not shown in SRTP/TLS call
SCPP-3370: Menu diction in the German phone GUI is badly
SCPP-3465: LED behaviour after pressing Function Key (Redial, Directory) not correct/inconsistent
SCPP-3471: Some list box views like Help Screen or Settings Menu don't have context keys
SCPP-3472: Title of Directory screen is wrong
SCPP-3485: Initiating a transfer by pressing the transfer key 2 times does not work any more (snom870 only)
SCPP-3958: Select not the first target in call list ==> always the first entry (== the last call) in the call list was dialled
SCPP-3938: Identity index is shown twice before the remote call partner
SCPP-3892: Plantronics CS540 fast dialling for calls initiated by headset could result in not dialling out
SCPP-3889: Call Deflection via Call Forwarding key (also with key Speed Dial) is working even though redirect_ringing is disabled
SCPP-3882: cannot dial first entry out of internal directory (snom 300 only)
SCPP-3827: Snom320 reacts very slowly over time (visible through delayed blinking of clock colon) and finally crashes
SCPP-3805: call deflection fails if transfer target is dialled using fkey type extension
SCPP-3796: not possible to set up encrypted WiFi via PUI (snom 870 only)
SCPP-3659: Caller picture doesn't work
SCPP-3535: Attended transfer on calling inconsistent across devices
SCPP-3795: pressing redial key twice doesn't lead to dialling the last dialled number
SCPP-3704: After setting a caller to the Deny-List by "long-press" of the cancel key the caller is still able to call the phone
SCPP-2388: snom VISION Speed Dial: Cannot initiate/cancel outgoing calls or answer incoming calls
SCPP-3651: Voicemail retrieve - phone should call user mailbox index if message account not specified in MWI NOTIFY (Broadsoft)
SCPP-3486: Name from internal directory not shown during call
SCPP-3490: Payment info (AOC) is not shown when call is terminated locally
SCPP-3542: redial hard key or soft key doesn't do redial
SCPP-3552: If internal directory has a lot of entries and the call lists (missed, dialled, received) are full, the phone reacts very slowly on keys redial and soft key call history (snom 3xx only)
SCPP-3563: Cannot delete entry of internal directory via PUI
SCPP-3565: Internal Directory: formatting errors in Directory Key (snom 870 only)
SCPP-3567: Missed calls can't be deleted and no user details are shown
SCPP-3568: Malformed error message if LDAP isn't initialized
SCPP-3601: SCA - phone activates second SCA line key after receiving 403 Forbidden (Broadsoft)
SCPP-3602: Delete fkey is wrongly displayed as "F_DELETE" within call lists screens
SCPP-3603: "upper/lower/number switch" and "DELETE button" don't work any more on snom 870
SCPP-3635: pressing OK key twice doesn't dial the latest dialled number (snom 870 only)
SCPP-3637: Status information - context sensitive function key gets stuck
SCPP-3684: Phone doesn't show correct name out of internal directory if entry was changed
SCPP-3979: Not possible to delete the selected entry in all Call History lists (Missed, Received, Dialed)
SCPP-4025: Cannot use hold key to retrieve call
SCPP-3712: Call toggling didn't update remote call partner on display
SCPP-3773: Graphical Issues when pressing function key for system info while in a call
SCPP-3784: Line Info Layer disappears on incoming call
SCPP-3865: function keys "Kick" and "Split" are not being displayed in conference (snom Meeting Point only)
SCPP-3873: Setting an empty display name for identity through phone menu results in __Y__
SCPP-3896: Call LED keeps blinking and display shows "1 missed call" although call list has already been viewed (snom 870 only)
SCPP-3823: Keypad debouncing causing unexpected 'double-digit' dialling. Intermittent issue occurs once out of ten dials
SCPP-3813: Going on-hook doesn't terminate the active call during call waiting scenarios
SCPP-3994: Phone puts current call on hold while on speaker, getting a new incoming call and picking up the handset. Switching the device should always stay with the current call
SCPP-3954: Mute not indicated when the microphone of the active audio device has been muted (snom 300 and 320 only)
SCPP-3903: Line Info Layer is really ALWAYS visible if enabled
NETWORK
SCPP-4053: Not well formed DHCP REQUEST in RENEWING state
SCPP-4089: DNS: Underscore in default host name violating RFC
SCPP-3742: Wifi is not working with Ralink 3070 USB stick
SCPP-3616: (Freeze during boot if Wifi is configured but no Wifi stick is present (snom821/870/720/760)
SCPP-3582: Phone doesn't display why it's restarting on DHCP server sending DHCP NAK/Decline
SCPP-3571: DFKS subscription handling on network loss (Broadsoft)
SETTINGS
SCPP-3636: Option to force Gigabit Ethernet is missing on snom 7xx
SCPP-3607: action_disconnected_url not fired on call reject any longer
SCPP-3948: OCI-P - Directory keys should be set by default to OCIP if user_server_type is set to Broadsoft
SCPP-3597: reboot initiated by changing display name (Broadsoft)
LDAP
SCPP-3200: Phone shows ??? for some Active Directories schemes
SCPP-3121: LDAP lookup for outgoing call is not working correctly
SCPP-3973: LDAP results are not sorted
SCPP-3976: LDAP directory search is not usable for fast input
SCPP-3922: Delay during dialing with enabled number guessing (third digit displayed too slowly)
SCPP-3812: it takes much too long between the first and second LDAP search when dialing and using number guessing
SCPP-3487: wrong icons for selection of the upper, lower cases and numbers
SCPP-3613: Number Guessing with LDAP is not usable
SCPP-3653: returned name from LDAP directory is not completely displayed in incoming and missed calls lists
SCPP-3649: After LDAP query switching between a-A-1 by number editing doesn't work any longer (snom 870 only)
SCPP-3884: phone should hide the LDAP search display if the search had no results during number guessing
WUI
SCPP-3832: Ethernet switch properties can neither be accessed nor adjusted
SCPP-3687: Pressing # Key via remote doesn't work anymore
XML BROWSER
SCPP-3996: <SoftKeyItem> elements are not displayed if context senstitive keys (F1-F4) are addressed
SCPP-3579: minibrowser.htm does not replace Query variables correctly
Known Issues

n/a

Personal tools
Interoperability