Firmware/V8/Features

From Snom User Wiki

< Firmware | V8
Revision as of 14:35, 1 October 2013 by Madigan (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

8.7.3.25 New Features

NETWORK
SCPP-5130: WLAN - Support for 802.11N
WUI
SCPP-5131:Block/Allow dialing from WUI or via HTTP requests based on new setting dial_from_wui
HEADSET
SCPP-5138: USB HID thread integration to avoid blocking of phone software

8.7.3.23 New Features

PUI
SCPP-4905: Hot Desking - Identities have a new setting user_no_auto_logoff which defines that the identity is not deleted during Logoff all. This can be used e.g. for emergency lines.

8.7.3.22 New Features

AUDIO
SCPP-3224: Implementation of dtmf_volume setting for all phone types
SCPP-2338: new setting dtmf_handset_phone to disable DTMF tones during call initiation in handset mode
XML BROWSER
SCPP-4978: Broadsoft/BLF/Call Park Indicator/Call Park Pickup in Buddy List XML Definition
  • XML Buddy key now also signals a parked buddy and allows to retrieve it

8.7.3.19 New Features

AUDIO
SCPP-3988: exclusive early-media / local ringback playback
SCPP-4491: new setting to define which numbers will cause a secondary dial tone: secondary_dialtone_when
SCPP-15: if a headset is used, ringing tone should be audible both on headset AND speaker (optional)
Added entry Use Headset and Speaker to pull down menu so there now are three available options:
  • Use Headset
  • Use Speaker
  • Use Headset and Speaker
PUI
SCPP-4488: Add new language LT (Lithuanian)
SCPP-4462: implementation of contact_source_priority
SCPP-4390: New field Action URL added to the internal address book.
The field defines a URL that is fetched on in/outgoing calls for that contact and should return an XML.
It is possible now to connect a video camera (e.g. door phone) and automatically fetches the XML and therefore show the mjpeg stream when e.g. the door phone calls the reception. The XML/mjpeg is also fetched for outgoing call, so it is possible to call a surveillance camera or the door phone. But the contact with the URL must be stored in the internal address book.
NETWORK
SCPP-4396: New time zone Lithuania added

8.7.3.15 New Features

PROVISIONING
SCPP-4392: When using PnP the phone should be able to process NOTIFYs at every time (currently limited to 5 seconds after the SUBSCRIBE has been sent)
SCPP-3064: SIP MESSAGE can be used to send settings to the phone
PUI
SCPP-4314: Improved function key type handling
SCPP-3874: Implemented joined call screens for 710/720
SCPP-4215: Call-screen view can be configured whether the incoming or the active call has priority using always_show_active_call setting. Screen shows the prioritized call.
SCPP-4103: added setting offhook_accept_calls to disable answering a call on off hook
SCPP-4235: New identity-based setting remote_contact_header_field to control whether "From" header URI or "Contact" header URI are stored in the call list
SCPP-4182: It is now possible to click on the details button when having the missed-message selected in status Message view. The phone will then show all missed calls
SIP
SCPP-4326: Add support for server based DND for Metaswitch
XML
SCPP-4097: add a dtmf-action to the action tag list.
NETWORK
SCPP-3990: IPV4 conflict detection should be VLAN aware
AUDIO
SCPP-3926: Implement headset usage with serial EHS box for snom 710
SETTINGS
SCPP-4172: added values "snomONE" and "SUTUS BC" for user_server_type

8.7.3.10 New Features

AUDIO
SCPP-3719: Implement music on hold, which should be send from the phone itself
WUI
SCPP-3737: Long key press via web interface (Enhancement of command.htm?key=... according to the following syntax command.htm?key=<key>[,<long_press_timeout_ms[,pause_after_key_ms]];...)
SCPP-3745: Provide state of identities and lines in web interface (http://[Phone IP]/state_of_identity.htm)
SCPP-3755: Provide LED status information in web interface
  • New section LEDS is appended to the end of the state_of_gui.htm page. The first row shows the title of the fields (number, frequency, and colour). Fields are separated by a blank.
SCPP-3758: Force idle state in web interface
SCPP-3763: Swedish language files updated
SCPP-3977: screen.bmp and alike should only be accessible in admin mode
PUI
SCPP-3843: Reintroduce menu option to configure fkeys using phone PUI
SCPP-3302: Scrolling of long display names
SCPP-3321: Allow all XML defined buttons to display a custom label - springboard icons may define color and positioning/size of the label
SCPP-3900: Phone Menu shows basic identity functionality in user mode (Menu - Identity)
NONE: New 370 splash images
SETTINGS
SCPP-3856: change obsolete setting values (e.g. F_R) on the fly, so customers don't need to fix their provisioning
SCPP-3162: Remove Identity - Remove also all Identity related settings
NONE: improve settings store log
XML BROWSER
SCPP-1492: Minibrowser: new XML tag for DTMF requested
NETWORK
SCPP-2862: IP address conflict check on DHCP an static IP
HEADSET
SCPP-2968: Act on USB Soundcard keyevents
SCPP-3842: Implementation of GN Netcom USB Headsets Specs
SCPP-3808: Implement headset usage with serial ehs box for 720/760
NONE: logs for serial headset commands
PROVISIONING
SCPP-3991: Option to have in redirect http-URLs again just filenames, instead of complete URLs
SCPP-3801: If the update policy is set to 'ask_for_update', a status message should be shown instead of terminating LCS and let LID ask the question
SCPP-2704: phone should not ignore HTTP 302 response instead make a new request to the provided location
NETWORK
SCPP-3990: IPv4 conflict detection should be VLAN aware
UC
SCPP-3786: Device Updates via Lync Update Service
SIP
NONE: New Log message for creation and deletion of a subscription

8.7.3.7 New Features

PUI
NONE: ADD - new setting mute_is_dnd_in_idle

8.7.3.6 New Features

CERTIFICATES
SCPP-3270: ADD - Entrust Root CA certificate

8.7.3.5 New Features

n/a

8.7.3.4 New Features

SIP
SCPP-2201: ADD - AOC Indication in 183 Response.

8.7.3.3 New Features

NETWORK
SCPP-2871: ADD - Advanced timeout handling in webclient. Added a new class which is handling 'back off timer' values.

8.7.3.2 New Features

SIP
SCPP-3241: ADD - Broadsoft - Several Content-Types/Events not supported. Feature added for call center call information. Minor improvement, remove tailing comma

8.7.3.1 New Features

PUI
SCPP-3030: Mute button in idle screen toggles DND (snom 300 only)
SCPP-2807: When the phone is rejected by the OCI server it needs to ask the user for the credential (user, password) using the PUI.
SCPP-2939: support for describing key-behaviour in XML for idle-navi-, idle-context- and hard-keys (menu and alike)
SCPP-2997: Broadsoft XSI-ACD Agent implementation
SCPP-3324: New setting requested to restore old speaker key behaviour: speaker_toggles_device
SCPP-726: OCS/Lync: Port for 370, 870, MP: Inform user about special routing events (fowarding, delegation, team call, acd, private line, cccp conferencing) during ongoing call
SCPP-3062: new setting controlling which canceled incoming rings don't make it into the missed-call-list: sip_cancel_reasons_to_ignore_missed_call
SCPP-3208: Added QSC Broadsoft ResourceList Keys
NONE: Saving new tbook entry out of call list details is taking name from contact pool if available
WUI
SCPP-2775: ADD - Add czech tone scheme to web UI drop down
XML
SCPP-3208: QSC Broadsoft ResourceList Keys - In XML-descriptions all applicable actions get fired now, not just the first one - accept though for dial-actions since phone can only dial one party at a time.
ACTION URL
SCPP-3157: new setting replace_header_fire_action_url if true action urls will be fired during transfer with replace headers.
CERTIFICATES
SCPP-3270: Entrust Root CA certificate added
DHCP
NONE: Fill DHCP option 12 (hostname) with 'snom_XXXXXX'.
SCPP-2773: Exchange Device Information via DHCP INFORM with the Gateway even if DHCP is not used for IP address allocation, two new settings: dhcp_options_on_ip_aquire and dhcp_options_on_inform
XML BROWSER
NONE: Minibrowser is now capable of handling elif and else tags.
PROVISIONING
SCPP-2808: Phone should always prefer redirection server over DHCP option 66/67. Added new setting provisioning_order which can change order of provisioning types
SIP
SCPP-3064: SIP MESSAGE can be used to send settings to the phone
AUDIO
SCPP-3122: Added setting headset_rings_once (in Advanced/Audio) to disable default repeated ringing for headsets.
URI
SCPP-3407: URi Utils should replace all occurrences of tokens in URIs.

8.7.2 New Features

CERTIFICATES
(8.7.2.9) SCPP-2971: ADD - Entrust Root CA certificate
AUDIO
(8.7.2.7) SCPP-2360: ADD - (snom720, snom760) Missing GSM Codec
(8.7.2.4) UPD - (snom720, snom760) Audio profiles have been improved.
UC
(8.7.2.5) SCPP-726: ADD - Microsoft OCS/Microsoft Lync: Inform user about special routing events (fowarding, delegation, team call, acd, private line, cccp conferencing) during ongoing call.
(8.7.2.5) SCPP-2438: ADD - Microsoft Lync: Inbound private lines.
(8.7.2.5) SCPP-2605: ADD - Microsoft Lync: Place g722 on top position of default codec list.
(8.7.2.0) SCPP-2411: ADD - Microsoft Lync - CFWD support with new publishing behavior.
(8.7.2.0) SCPP-2435: ADD - Microsoft Lync - Call admission control and bandwith management
(8.7.2.0) SCPP-2436: ADD - Microsoft Lync - Media Bypass
(8.7.2.0) SCPP-2437: ADD - Microsoft Lync - Monitoring and Device Inventory Reporting
(8.7.2.0) SCPP-2632: ADD - Microsoft Lync - E.911 - support of ms-subnet header in REGISTER and subnet info in roaming provisioning SUBCRIBE.
(8.7.2.0) SCPP-2634: ADD - Microsoft Lync - E.911 - disable of current Call Forwarding rules in Emergency Calls and revert automatically after 120 minutes.
(8.7.2.0) SCPP-2694: ADD - Microsoft Lync - Support for Set user presence.
PUI
(8.7.2.5) SCPP-3255: ADD - New setting keyboard_lock_accepted_callkeys to accept additional keys during keyboard lock.
(8.7.2.1) SCPP-1034: ADD - Show resolved names even in Call Lists.
(8.7.2.0) ADD - (snom300, snom320) Phone now uses joined-call-screen-techniques (SCPP-2590).
(8.7.2.0) SCPP-1781: ADD - Presence-buttons now work as transfer-target as well.
(8.7.2.0) SCPP-2566: ADD - Introducing new setting recording_mechanism to control what happens, when record key is pressed.
(8.7.2.0) SCPP-2590: ADD - (snom820,snom821) Softkeys in call-screen controlable via settings call_screen_fkeys_on_outgoing, call_screen_fkeys_on_incoming, call_screen_fkeys_on_connected and call_screen_fkeys_on_holding
(8.7.2.0) SCPP-2590: ADD - (snom820,snom821) Text format in line-info layer is now configurable, see new settings (provisioning only): lil_first_line_format, lil_second_line_format, lil_state_format, lil_1st_line_height and lil_2nd_line_height.
FKEY
(8.7.2.0) SCPP-2879: ADD - New option to distinguish dialing from call-pickup added to fkey XML subscribe specification.
(8.7.2.0) SCPP-2892: ADD - New option to add routing info added to fkey XML subscribe specification (subscription doesn’t need to use outbound-proxy from identity).
IP
(8.7.2.0) SCPP-2862: ADD - IPv4 conflict detection during bootup and defending during runtime (RFC 5227).
SETTINGS
(8.7.2.0) SCPP-2139: ADD - New setting disable_storing_changes to disable writing setting and local Directory changes to flash memory.
(8.7.2.0) SCPP-2720: ADD - New setting show_connected_call_in_monitor_view.
SIP
(8.7.2.0) SCPP-2922: ADD - Enable extension monitoring groups.
(8.7.2.0) SCPP-3072: ADD - New setting sip_stop_subscriptions_on_register_failure to stop subscriptions on registration failure.
(8.7.2.0) ADD - Sending DND on/off starcodes for server-managed DND as well.
WUI
(8.7.2.0) SCPP-3099: ADD - Make setting restrict_uri_queries configurable via WUI.

8.4.35 Features

no new features

8.4.34 Features

AUDIO
SCPP-3324: ADD - New setting requested to restore old speaker key behaviour: speaker_toggles_device

8.4.33 Features

ACTION URL
SCPP-3029: Do not trigger disconnect Action URL in case of rejecting a call anymore.
SIP
SCPP-3072: ADD - New setting sip_stop_subscriptions_on_register_failure to stop subscriptions on registration failure.
WUI
SCPP-3099: ADD - Make setting restrict_uri_queries configurable via WUI.

8.4.32 Features

CERTIFICATES
SCPP-2745: Added - Root CA of Start Commercial Ltd was added
PUI
SCPP-1911: Added - New setting for reciprocal hold. See reciprocal_hold
SCPP-1851: Added - User can now control when and how to switch message and call indication-leds. See Leds_Behavior
SCPP-2066: Added - Speaker-button acts like cancel when in a call and only speaker is active.
SCPP-2431: Added - Switching audio-devices for incoming and outgoing multicasts is possible now.
SCPP-2442: Added - (snom300, snom320, snom870): The setting show_ivr_digits can be used on the phones types now.
SCPP-2716: Added - The "forward to"-button goes to edit-number with pre-inserted number from settings when the transfer target ends with ";".
SCPP-2225: Added - (snom870) The speaker-touch-button now indicates whether speaker is on or not.
SCPP-2703: Added - Accept VGA-sized external images (color phones).
SCPP-2788: Added - Backlight settings were unified over all phone models.
SCPP-2406: Added - Forward all target is initialized with predefined or last entered number in edit screen.
SCPP-2675: Added - If billing informations are available show terminate screen for 3 sec.
LANGUAGE
SCPP-NONE: Added - New Czech translation
SCPP-NONE: Added - New Hebrew translation
UPDATE
SCPP-2516: Added - Disable frequent firmware checks by setting firmware_interval to 0
SIP
SCPP-2427: Added - DSCP value is used on all sip connections (udp, tcp, tls) and also for media (RTP, RTCP)
SCPP-2414: Added - SIP PUBLISH for number completion can be disabled. See use_proxy_number_guessing
SCPP-2797: Added - Registration can be delayed till time was received from NTP server. See user_wait_for_ntp_before_register

8.4.31 Features

No new features

8.4.30 Features

no new features

8.4.29 Features

no new features

8.4.28 Features

SIP
SCPP-2394: Added :Keep from sending too many ACKs to retransmitted 200OKs via new setting ack_repetition_idle_time;
SCPP-2394: Added :Send hold-reinvite AFTER having send ACK via new setting ack_before_reinvite_when_holding;

8.4.27 Features

SIP
Added: New setting to ignore sip-asserted-headers (don’t show): ignore_asserted_in_gui

8.4.26 Features

PUI
Added: (snom300, snom320) Added new setting always_refresh_both_lines : If enabled, always both (even unchanged) display lines are re-drawed. This may help when display content gets corrupted. (SCPP-2301)
Added: (snom300, snom320) Added new setting reset_display_on_idle : Time in minutes after which the phone resets the display hardware when in state idle. If greater 0, state change to state idle resets display hardware as well. (SCPP-2301)

8.4.24 Features

PUI
Added: (snom8xx) Led control out of minibrowser LED-tag is available now as well. (SCPP-2027)
Added: (snom300) New function key handling in minibrowser. (SCPP-2150)
Added: New identity setting conferencing is added which contains a sip-uri for a conference room. Used by pressing conference keys. (SCPP-1773)
HEADSET
Added: Wireless headset timing is now configurable via new setting headset_cmd_pause.
LLDP
Added: Accept also guest-voice, softphone-voice, vlan near voice and vlan network policy.
Added: Log Messages of Port ID Subtype and Port Description to have information about on which switchport the phone is plugged in (loglevel 6)!
Added: New setting lldp_asset_id, default value is phone type.
SIP
Added: A new setting sip_max_challenges is added to allow multiple challenges to a single phone request. (SCPP-2026)
TLS
Added: Certificate Authority Deutsche Telekom AG.
TR-69
Added: Two new parameters line status and line call state are added. (VOFO-95)
WEB
Added: Two new settings http_client_save_credentials and http_proxy_save_credentials are added to be able to save credentials after challenge request. (SCPP-1728)

8.4.23 Features

No features

8.4.22 Features

No features

8.4.21 Features

PUI
Added: New setting short_cancel_denies_call with the following meaning: true: short key press of cancel key will deny an incoming call; long press cancels the connected call. false: vice versa.

8.4.20 Features

No Features

8.4.19 Features

PUI
Added: (snom300, snom320) Enabled feature of opening local directory record of current call. (SCPP-1897)

8.4.18 Features

ACTION URL
Added new action URL variable $nr_ongoing_calls that always contains the number of active calls. (SCPP-1919)
AUDIO
Reduced speaker volume steps to 7 (SCPP-1896).
Added option to send silent RTP’s on mic mute to avoid connection loss problems in certain environments.
TR-69
Added support for X_000413_MethodNames. (SCPP-1824)

8.4.17 Features

NETWORK
Added support for LLDP-MED (Link Layer Discovery Protocol-Media Endpoint Discovery).
Added support for 802.1X with eap-md5.

8.4.16 Features

No new features

8.4.15 Features

AUDIO
Added new setting dtmf_volume for locally played DTMF tones. Can be used to improve inband DTMF and avoid DTMF echo (snomMP). (SCPP-1795)
DNS
Add new setting dns_cache_clear_timeout and timer.
XML BROWSER
Added callbacks in IF conditions. (SCPP-1798)

8.4.14 Features

AUDIO
Volume change should also change the speaker (handsfree) path (snomPA1, snomPA1DP).
BOOT
Boot process was optimized to save system memory (snomMP, snom870, snom821).
ETH
Switch port properties can be adjusted now. Switch port status is shown on WebUI info page (snom870, snom821). (SCPP-1070)
PUI
The big clock is no longer a snom-sign anymore, but it is now entirely made up of images and comes in two styles: analog and digital (snom870).
Login wizard for OCS version now inquires the three OCS specific login settings, instead of just account and registrar (SCPP-1631).

8.4.13 Features

PUI
New Action-URL setting for what URL’s to call when a certain subscription notify arrives (see http://wiki.snom.com/Settings/action_received_subscr_notify_url).
Number of speed key digits are limited to 3. No entries higher then 999 are possible.

8.4.12 Features

No new features

8.4.11 Features

LID
Added IEEE 802.1X eap-md5 authentication (new settings ieee8021x_eap_md5_username and ieee8021x_eap_md5_password).

8.4.10 Features

LID
Added mechanism for sending a stream of DTMF(s) on mapped key or WUI page (snom821, snom870).
XPATH
Enhanced Xpath implementation, i.e. max/min/last are supported now.

8.4.9 Features

TR-69
Allow to update/download the parameter map via the WUI.

8.4.8 Features

No new features

8.4.7 Features

No new features

8.4.6 Features

No new features

8.4.5 Features

No new features

8.4.4 Features

IOPINs
Added mechanism and required settings for automatic turning off of pins based on timers (snomPA1,snomPA1DP).
TLS
Added Server Authentication.

8.4.3 Features

FKEY
XML definition allows to define a default-state that gets applied when a key is set up initially, see here.
XML definition now allows to define action-urls to be called on key-event, see here.
PUI
All springboard icons can now be repositioned or removed using settings idle_icon_01..15 (snom870).
Springboard can show free programmable function keys now (configured by XML-definitions in XML section <functionKeys>)(snom870).
Setting snom_clock_style set to <analog> by default (snom870).
The settings dkey_fkey1-4 are available now. They can be set like other pre-programmed function key settings, for example to "speed 1234". If they are set, they are fired instead of the original softkeys configured in the settings gui_fkey. (SCPP-1564)
KEYS
Keymapping may now be changed via settings in case a customer wants to reorder the plastic keys of our phones.
SETTINGS
Setting values like "!$(user_name)@$(user_host)" will be evaluated and replaced with the result of their setting values respectively. (SCPP-1534)
TR-69
Added new RPC Method: X_Snom_GetWebContent.
UPLOAD
Customization archives are reloaded after firmware update (snom370-VPN, snom820, snom870).

8.4.2 Features

FKEY
XML definition now allows to define a different dial target depending on the fkey-state, see action.
Added new setting show_clock, which removes date and time from idle screen, if disabled. (SCPP-1263)
Letter input via numpad now depends on selected language (defines which special characters to use) but may be overwritten by values of new settings chars_in_…case_on_0..9. (SCPP-528)
SIP
Added AOC via XML: aoc-d and aoc-e supported. (SCPP-1415)

8.4.1 Features

AUDIO
Added starting of Multicast Paging without PBX. Can be selected per fkey at the fkey webUI page. (SCPP-208)
Fixed audio reception when using OCS conferencing. (snom820)
Fixed casing speaker click sound whenever it was turned on. No more click (snom870). (SCPP-1376)
Allow to mute the ringing of an incoming call with the mute key or a mute function key. (SCPP-937)
DIALPLAN
Added identity parameter to the dialplan XML which allows to route numbers to a particular identity no matter which identity is currently selected. (SCPP-195, SCPP-1244)
DIRECTORY
Added multi-numbered directory entries and favorites directory (snom360, snom370, snom820), just like snom870. But snom360 and snom370 don’t store photos though.
Master-entries in internal directory may now define a nick-name.
Added new attribute number-type.
Provisioned tbooks entries now replace old records by the same index. If you don’t want this, do not provision an index. (SCPP-940)
Provisioned tbooks may now entirely replace current tbook (instead of just adding to it), just set attribute "complete" of the tbook-tree to "true". (SCPP-940)
DTMF
Speed dial now accepts a DTMF sequence that is played once the call has been established. (part of SCPP-194)
Pressing a speed dial function key with argument "number=incomplete" shows the number on the display for further editing rather then dialing it. (part of SCPP-194)
PUI
Added umlaut support. Can be used for better LDAP-search requests, but umlauts may now be used anywhere where you can enter a text (snom360, snom370, snom820, snom870, snomMP).
XML idle screen on snom370 can now define the statusbar position just like snom360 and snom820.
Now displaying used codec and SRTP (for secure connections) when one presses the message button during a call (snom820). (SCPP-300)
Now displaying codec used and SRTP (for secure connections) in party-details (snomMP). (SCPP-300)
Codec info on ?-key is now integrated into the GUI instead of destroying its design (snom370). (SCPP-300)
Added 5 party conference (snom820). (SCPP-852)
Increased usability of touch-interface by not mistaking slightly differing touch vs. release coordinates for Drag’nDrop. Assuming Press at initial coordinates instead (snom870).
Increased speed when rendering idle XML’s with lots of clock-images (snom820, snom870).
Password challenge will disappear automatically when identity registers successfully (eg. if password was provided via webUI). (SCPP-1339)
Saving (to restore after a reboot) the latest 5 call records of each: missed, received and dialed.
Setting menu is now defined by an XML file and processed by minibrowser. (SCPP-1293)
Two action-urls can be configured, for press and release of the key, respectively. (SCPP-1122)
Via the new setting user_admin_mode, you can hide users privacy (call lists, directory) from the administrator. (SCPP-1326)
Added setting ignore_missed_calls_on_busy that inhibits the phone to add an incoming call to the missed calls if the user is in dialing state and denies an incoming call.
Added setting to enable the ringtone while other calls are on hold. (SCPP-201)
Allow to edit numbers from the call histories before calling them. (SCPP-921)
Added new way of provisioning fkeys to represent subscribtion-notifies (see wiki?fkey).
LID
Added pin control functionality for the door phone through OB DTMF. Also added light blinking on voice activity for the door phone (snomPA1-DP).
NET
Added new setting ignore_dhcp_findings allowing to ignore certain DHCP findings. (SCPP-1179)
PROVISIONING
Cut provisioning retry counter from 20 down to 1.
SETTINGS
Activate reading of presence states from XML file. (SCPP-1078)
New upload types gui_xml_state_conference, gui_xml_state_details, gui_xml_state_holding, gui_xml_state_settings, gui_xml_addperson added to be able to provision XML-GUI files.
Removed global ringer setting ring_sound which is redundant and confusing as the ringer is taken from the line dependent setting user_ringer. (SCPP-1318)
SIP
Added support for NTLM V2 authentication, new setting use_NTLMv2 can be used to disable NTLM V2 authentication, but is enabled by default.
New setting suppress_sip_messages suppresses processing of SIP MESSAGE but replies with 200 OK if enabled.
UTILS
Increased speed on reading XML-files.
WEB
If set, use the hostname of the phone as the title for the web user interface pages. (SCPP-1366)
Added new action URL which is triggered when a phone receives an attended transfer. (SCPP-1037)
Added timezone for United Arab Emirates (Dubai). (SCPP-353)
Allowed to enter the new XML-describtion of fkeys via web interface as well.
Values in drop-down combo-boxes for fkey-types and key-events are now sorted alphabetically as well.
Left menu in the snom web UI is now configurable. Just put a comma separated list in two new settings leftnav_hidden_user and leftnav_hidden_admin for user and admin mode respectively.

8.3.7 Features

No new features

8.3.6 Features

No new features

8.3.5 Features

No new features

8.3.4 Features

No new features

8.3.3 Features

  • Added support for OCS-presence-only (no voice) identities (Broadsoft/OCS integration) (new settings: user_presence_identity, user_presence_only, user_default_contact_uri).
  • User may now enter special characters via number-pad: äáâàçëéêèïíîìöóôòñßüúûù - just press repeatedly the key associated with the base-letter (eg. 1-abc for ä, á, â, à and ç), you must of cause be in mode abc or ABC (SCPP-528).
  • One can now configure what label to put onto the virtual keys.
  • Discard XML-idle-screen on pressing cancel key (whiping display still also yields same result). (SCPP-1084)
  • Discard call monitoring screen on cancel key. (SCPP-941)
  • Fixed duplicate pickup information in call pickup screen. (SCPP-1102)
  • Go offhook with wireless headset will dial number out of internal or LDAP directory. (SCPP-1072)
  • LDAP lookup when dialing a number now starts only when the typed in number has as many digits as defined with setting guess_start_length.
  • Menu entries are now hideable with a comma separated list in new settings menu_hidden_user and menu_hidden_admin.
  • Enabled EHS support.
  • Added call agent ACD state synchronization. (SCPP-854)
  • Internal directory can now be synchronized with certain XCAP servers. (SCPP-1047)
  • Master entries in internal directory may now define a nick name.
  • Left menu in the WUI is now configurable. Just put a comma separated list in two new settings leftnav_hidden_user and leftnav_hidden_admin for user and admin mode respectively.
  • Added runtime variable $phone_ip to be used with the webclient like triggering action URLs etc.
  • Showing bootloader version at system info page.
  • Fixed WEP mode.

8.2.35

FKEY
XML-definition now allows to define a default-state that gets applied when a key is set up initially, see here.
XML-definition now allows to define action-urls to be called on key-event, see here.
KEYS
Key mapping may now be changed via settings, when a customer wants to reorder the plastic key caps of the phones.
TLS
Added Server Authentication.
TR-69
Added new RPC Method: X_Snom_GetWebContent.
UPLOAD
To trigger reloading of customization archives, clearing now settings 'upload_gui' and 'upload_web' after successful update.

8.3.34 Features

No new features

8.2.33 Features

No new features

8.2.32 Features

No new features

8.2.31 Features

No new features

8.2.30 Features

No new features

8.2.29 Features

No new features

8.2.28 Features

No new features

8.2.27 Features

No new features

8.2.26 Features

No new features

8.2.25 features

FKEY
XML definition now allows to define a different dial target depending on the fkey-state, see this article.
PUI
Added new setting show_clock, which removes date and time from idle screen, if disabled. (SCPP-1263)
Timezone setup wizard now starts out with reduced list of timezones that match the choosen language (snom360, snom820, snomMP).
Letter input via numpad now depends on selected language (defines which special characters to use) but may be overwritten by values of new settings chars_in_…case_on_0..9. (SCPP-528)
Password challenge will disappear automatically when identity registers successfully (eg. if password was provided via WUI). (SCPP-1339)
WUI
If set, use the hostname of the phone as the title for the web user interface pages. (SCPP-1366)
Added new action URL which is triggered when a phone receives an attended transfer. (SCPP-1037)
XCAP
Synchronization now ignores obvious dummy SIP numbers. (SCPP-1388)

8.2.24 Features

  • Now displaying used codec and SRTP (for secure connections) when one presses the message button during a call (snom820). (SCPP-300)
  • Now displaying codec used and SRTP (for secure connections) in party-details (snomMP). (SCPP-300)
  • Codec info on ? key is now integrated into the GUI instead of destroying its design (snom370). (SCPP-300)

8.2.23 Features

  • Allow to mute the ringing of an incoming call with the mute key or a mute function key. (SCPP-937)
  • Via the setting user_admin_mode, you can hide users privacy (call lists, directory) from the administrator. (SCPP-1326)
  • Added setting ignore_missed_calls_on_busy that inhibits the phone to add an incoming call to the missed calls if the user is in dialing state and denies an incoming call.
  • Allow to edit numbers from the call histories before calling them. (SCPP-921)

8.2.22 Features

  • Subscribtions may now define a for and a to attribute. for sets the R-URI, to is for the to-field in the sip-message.
  • Increased speed when rendering idle XML’s with lots of clock-images (snom820).
  • New setting suppress_sip_messages suppresses processing of SIP MESSAGE but replies with 200 OK if enabled.
  • Added new number type attribute.
  • Increased speed when reading XML files.
  • Allowing to enter new XML description of fkeys via web UI as well.
  • Values in dropdown comboboxes for fkey-types and key-events are sorted now alphabetically.

8.2.21 Features

  • Added identity parameter to the dialplan xml which allows to route numbers to a particular identity no matter which identity is currently selcted. (SCPP-195, SCPP-1244)
  • Line LEDS can now change color according to the color-attribute received for those keys defined as buttons (snom820). (SCPP-804)
  • Virtual key state and side screen now use received labels for those keys defined as buttons (snom820). (SCPP-804)
  • Decreased provisioning retry counter from 20 down to 1.
  • Added new setting use_NTLMv2 to disable NTLM V2 authentication which is enabled by default.

8.2.20 Features

  • Pressing a speed dial function key with argument number=incomplete shows the number on the display for further editing rather then dialing it. (SCPP-194)
  • Speed dial now accepts a DTMF sequence that is played once the call has been established. (SCPP-194)
  • A provisioned directory may now entirely replace the current directory instead of just adding to it. Just set attribute complete of the directory-tree to true. (SCPP-940)
  • Provisioned directory entries may now replace old records with the same index. If you don’t want this, don’t provision an index. (SCPP-940)

8.2.19 Features

  • Added new way of provisioning fkeys to represent subscribtion-notifies (see wiki→fkey).
  • Added new setting ignore_dhcp_findings allowing to ignore certain DHCP options provided by DHCP server. (SCPP-1179)

8.2.18 Features

  • Added timezone for United Arab Emirates (Dubai). (SCPP-353)
  • Calculate round trip delay (in ms) to be used in reporting stats.
  • Enhanced VQ-Report.
  • Added support for NTLM V2 authentication.

8.2.17 Features

  • Save (to restore after a reboot) the latest 5 call records of missed, received and dialed call list, respectively.
  • Two action URLs can be configured, for pressing and releasing a key, respectively. (SCPP-1122)
  • Added new setting suppress_ringing_during_hold to enable the ringtone while other calls are on hold. (SCPP-201)
  • Add optional Outbound support. (SCPP-1079)

8.2.16 Features

  • Phones with grafical display may now enter special characters via numpad (snom360, snom370, snom820, snomMP): äáâàçëéêèïíîìöóôòñßüúûù - in edit mode "abc" or "ABC" just press repeatedly the key associated with the base-letter (eg. "1-abc" for ä, á, â, à and ç). (SCPP-528)
  • XML idle screen can now define the statusbar position even for snom370 (just like 360 and 820).
  • OCS: Added support for OCS-presence-only (no voice) identities (Broadsoft/OCS integration) (new settings: user_presence_identity, user_presence_only, user_default_contact_uri).
  • Discard "call monitoring" screen on Cancel key. (SCPP-941)
  • Menu entries are now hideable. Just put a comma separated list in two new settings menu_hidden_user and menu_hidden_admin for user and admin mode respectively.
  • Internal directory can now be synchronized with certain xcap-servers. (SCPP-1047)
  • Master entries in internal directory may now define a nick-name.
  • Left menu in the snom web UI is now configurable. Just put a comma separated list in two new settings leftnav_hidden_user and leftnav_hidden_admin for user and admin mode respectively.
  • Added runtime variable $phone_ip to be used with the webclient like triggering action URLs etc.

8.2.11 Features

No new features

8.2.10 Features

  • Call Agent ACD State Synchronization (SCPP-854)

8.2.9 Features

  • LDAP lookup when dialing a number now starts only when the typed in number has as many digits as defined with setting guess_start_length.
  • 820 now opens virtual key state automatically on activity, setting allowing that is on by default.

8.2.8 Features

8.2.7 Features

  • Added support for version 6 audio coefficients (snom3xx). Selecting the new room type "v6" leads to same volume behaviour as in version 6 releaeses. (SCPP-889)
  • Added support for options 132 vlan_id (802.1q) and 133 vlan_qos (802.1p). They can even be tunneled via option 43. (SCPP-859)
  • Added OCS support for presence key. (SCPP-641)
  • Minibrowser can now be invoked using HTTP. (SCPP-238)
  • Minibrowser pages can now trigger LEDs. (SCPP-240)
  • Text prediction based search on LDAP directory. (SCPP-409)
  • Transfer on onhook is now available for blind transfer, too. (SCPP-810)
  • Added additional STUN requests (RTPv0) in the beginning of a call for server type Teles. (SCPP-671)
  • Added OID to show CPU load average of last 1min., 5min. and 15min.
  • Added OID to show used, free, cached, lid (phone lowlevel app.) and lcs (phone highlevel app.) memory usage.
  • Added OID to show application uptime.
  • Added OID to show the number of incoming and outgoing messages.
  • Added OID to show the number of open connections.
  • Added OID to show the number of timeouts running.
  • Added OID to show the number of active subscriptions.
  • OCS: The User-Agent header now includes information whether the software type is OCS or not.
  • Added intermediate certificate phone2 that signs the phone certificate. The SSL certificate message encapsulates both certificates.
  • Added support of keys up to 4096 bits in size (client and server side).
  • One can upload and replace files in bmp (snom370-VPN, snom820) and html (snom370-VPN, snom820, snomMP) directories. (SCPP-873)
  • Removed second pair of HTTP user/pwd credentials for standard user. adminmode/admin_mode_pass is enough.(SCPP-679)

8.2.6 Features

No new features

8.2.5 Features

No new features

8.2.4 Features

  • LDAP result sets are sorted now. (SCPP-747)
  • VQM reporting is no longer restricted to MetaSwitch server type anymore.
  • To reduce memory wasting for SIP trace and system log we added a new setting sip_tracing to be able to switch off SIP tracing at all as well as the new loglevel -1 to switch off logging. (SCPP-779)

8.2.3 Features

  • Added Hungarian language support.
  • Enbabled EHS support (snom300). (SCPP-612)

8.2.3 Features

  • Added Hungarian language support.
  • Enbabled EHS support (snom300). (SCPP-612)

8.2.2 Features

  • Securing communiction with random message id. New CSTA messages for set and get settings, xml push and firewall test. (SCPP-648)
  • Added option for very fast LED blink rate on ringing (new setting blink_very_fast).
  • Added keyboard lock after timeout (new setting keyboard_lock_timeout). (SCPP-676)
  • Enhanced language support for Portugues and Hebrew.
  • Added language support for Estonian and Hungarian.
  • On challenged web client requests, user gets asked for username and password at the display. This may be used to login a phone user. (SCPP-699)
  • Phone can now upload files into tmpfs and replay them as MOH. (SCPP-696)
  • Parameters like "$ip_addr" as part of the URL stored in for example setting_server are replaced with it's values before the URL is used for provisioning requests. This is the same syntax like for the Action URLs. (SCPP-698)
  • Show login page after logout. (SCPP-678)

8.2.1 Features

  • Enlarged adressbook with entries for first and family name, email, company, birthday, etc. (snom820 and snomMP). (SCPP-522)
  • Hebrew and Cyrillic character editing support.
  • Call can be started out of call lists with wireless headset as well now. (SCPP-351)
  • VQM reporting over SIP, according to draft-ietf-sipping-rtcp-summary using SIP PUBLISH.
  • Added new setting prioritise_pbx_number_lookup to ignore PBX transmitted user name for incoming calls in order to enable correct lookup in internal LDAP address book. (SCPP-131)
  • Added support for RTP listening on multiple multicast sockets.
  • Added new setting empty_tls_client_cert to use empty client certificate in TLS connections. For OCS the setting defaults to on, otherwise to off. (SCPP-597)

8.1.3 Features

  • Call Pick-up: if the first character in the string following the "|" is a "!" the rest is dialed out unaltered
  • Added support for new check-sync option: check-sync;reboot=reregister-only

8.1.2 Features

  • Added new action release to clear previously seized button line.
  • Handle header "Remote-Party-ID" for Cisco Call Manager (CCM). (SCPP-412)
  • New setting user_additional_supported_header for "additional supported headers". (SCPP-413)
  • Added key_dtmf to initiate key events with DTMF tones remotely via http://phoneIP/command.htm?key_dtmf=KEYEVENT. (SCPP-94)
  • PC port can be disabled via new eth_pc option off.

8.1.1 Features

No new features

8.0.13 Features

No new features

8.0.12 Features

  • Complete system-info is now in settings (Phone_GUI). The Help-key on the phone ("?") now shows the support message on the display.

8.0.11 Features

  • redirection with function key type BLF
  • split timezone -10:USA into -10:USA(Hawaii) and 2-10:USA(Aleutian Islands) due to different DSTs
  • a logging entry is created if an Action URL could not be accessed
  • Device Feature Key Synchronization Broadsoft
  • Broadsoft directory access via OCI-P
Personal tools
Interoperability