Firmware/V7/Release Notes/7.3.14-7.3.10a

From Snom User Wiki

< Firmware | V7 | Release Notes
Revision as of 13:42, 27 January 2009 by Abbakhsi (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Change Log between 7.3.14 and 7.3.10a release

  • Added key_dtmf to initiate key events with dtmf tones remotely via http://phoneIP/command.htm?key_dtmf=KEYEVENT. (SCPP-94)
  • PC port can be disabled via new eth_pc option off.
  • Added new action release to clear previously seized button line.
  • New setting user_additional_supported_header for "additional supported headers". (SCPP-413)
  • Handle header "Remote-Party-ID" for server type Cisco Call Manager (CCM). (SCPP-412)
  • Added Generic Intercom Button feature. If programmable Function Key is set to Intercom without a target number, user gets asked for the target before Intercom call starts.
  • Added advertisement flash at the index.htm page (new settings advertisement and advertisement_url).
  • Added support for IPv6 DNS server address query.
  • Iso codes (ISO_639-1) are used to name different language files.
  • Provisioning retry counter can be canceled by pressing cancel key
  • If entered incorrectly three times and/or ongoing wrong http password access will be restricted for one minute blocks only.

  • Fixed disabled ringer animation screen. (SCPP-437)
  • Consistent behaviour locking the keyboard. (SCPP-470)
  • Fixed showing guessed number (snom370). (SCPP-430)
  • Missed calls LED handling logic fixed. (SCPP-379)
  • Send reinvite after aborted transfer as well as the line is "on hold". (SCPP-467)
  • Fixed call pickup if intercom is enabled. (SCPP-495)
  • Randomize request source port and DNS query id. (SCPP-479)
  • Fix Speaker Volume Adjustment in Headset/Handset and Speaker Mode. (SCPP-480)
  • A picture from CALL-INFO header in a provisonal 18x was never shown (snom370).
  • Transport parameter was dropped on redirected register.
  • Initialization was broken.
  • By default answer_after_policy is set to "off". (SCPP-506)
  • Flash plugin didn't work with current Flash player releases due to new Flash security requirements. (SCPP-43)
  • No entry was added in the missed call history if call waiting was disabled. (SCPP-450)
  • If one was to start dialing a number the DTMF of the first key was heard albeit dtmf_speaker_phone is switched off. (SCPP-424)
  • Fixed timezone settings for Vladivostok and Tonga. (SCPP-420)
  • Reset edit mode to numeric in transfer state. (SCPP-419)
  • Set all monitored LEDs to on after transfer. (SCPP-391)
  • Fixed one way audio with G.726-32 and Payloadtype 2. (SCPP-446)
  • Don't process SUBSCRIBE packet if contact header is missing (could happen by an Asterisk bug). (SCPP-431)
  • Fixed rejection of anonymous calls. (SCPP-418)
  • Wrong user image has been shown if a second call comes in (snom370). (SCPP-321)
  • LDAP lookup for incoming calls displayed wrong name when phone number contains same digits. (SCPP-70)
  • Removing an identity (that requires authentication) caused corrupt password prompt. (SCPP-283)
  • Fixed a couple of backlight issues (snom360, snom370). (SCPP-267)
  • Pickup worked via fkey but not via tick key or softkey. (SCPP-306)
  • Resolved sticky volume state. (SCPP-262)
  • Holding reminder did not work. (SCPP-319)
  • $remote parameter in action URL was indicating wrong number. (SCPP-349)
  • Fixed handling of deny-all for states ringing, connected and holding (SCPP-343).
  • Removed Identity settings when in user-mode. (SCPP-338)
  • Value "dim" for backlight on snom370 phone gui added. (SCPP-337)
  • Redial will use current identity if original id is unregistered except if current id is unregistered too.
  • Play current user ringer during changing ringer volume. (SCPP-133)
  • Added type of answering for Intercom (new setting intercom_connect_type in contrast to auto_connect_type). You may select now the audio device you want incoming intercom calls to use. (SCPP-116)
  • Clear area of status line before repaint (snom360, snom370). (SCPP-388)
  • Clearing call list was crashing phone. (SCPP-370)
  • Corrected wrong soft key assignment when a call is being hold in hands free mode. (SCPP-58, SCPP-310)
  • Call waiting was disabled during transfer. (SCPP-42)
  • On holding state no action performed by speaker off if speaker mode is active because no hang up is allowed. Dialing a new number can simply be started by typing numbers. (SCPP-60)
  • The assigned action for menu key is handled in connected state too (snom320). (SCPP-318)
  • Clean area of status line before repaint. (SCPP-388)
  • Using Flexor Manager to select the outbound line to use, did not change the outgoing identity on the phone, if multiple identities were configured. (SCPP-365)
  • Call did not disconnect after on-hook when a minibrowser file is being displayed and an on_hook action url is set. (SCPP-8)
  • If entered incorrectly three times and/or ongoing wrong http password access will be restricted for one minute blocks only.
  • Added wiki help link to Fkeypage as well.
  • Fixed CSV-import for directory. (SCPP-384)
  • Call transfer was not working with Flexor Manager. (SCPP-385)
  • IP's are now parsed and corrected before saving, because numbers like were causing problems (IPv4 only). (SCPP-325)
  • Fixed a bug in XML decoding. (SCPP-285)
  • STUN derived port number was not reflected in SDP (SCPP-108)
  • Display name decoding must be done if remote display name is encoded via setting encode_display_name. (SCPP-73)
  • Fixed missing of WWW-Contact on Registration if do_http_contact says so. (SCPP-74)
  • Refresh publish presence if time expires and publish the last state on bootup. (SCPP-256)
  • If the phone received a "422 Session Expires Too Small" error in response to the first INVITE with the Session-Timer, hangup on the subsequent INVITE resulted in the phone sending a BYE instead of a CANCEL. (SCPP-339)
  • Old To and From Tags were not cleared if subscription was restarted. (SCPP-360)
  • Properly refresh URI in SUBSCRIBE message (SCPP-316).
  • Fixed corrupt SDP full answer after SDP offer with unsupported RTP payload types.
  • Contact header of some requests were not properly replaced with valid STUN identity.
  • New setting ip_frag_enable to control the DF-BIT in IP packets.
  • Initial rtp-keep-alive was missing, which resulted in skipping of first seconds of MOH; if user_server_type is set to metaswitch do not send it. (#2008082810000098)
  • Fixed encryption of DTMF payload.
  • Polish special characters are displayed properly on new backlight display and at least as normal chars on old display. (snom300)
  • Delayed trap handling to fix issue which caused the phone to hang on bootup.
  • Fixed X-key to cancel a minibrowser slideshow. (SCPP-266)
  • Parsing and converting "&#…;" codes properly now. (SCPP-395)
  • Pressing keys in minibrowser during calls will not generate dtmf echo.
  • ASN.1 encoded length fixed. (SCPP-363)
  • fixed redirection via FKEY type BLF
  • fixed bugs regarding displaying numbers with multiple digits together with hebrew texts (BZQ-4)
  • phone was rebooting with DHCP lease times bigger than 16 hours
  • network for some phones was not working with 7.3 versions, fixed
Personal tools