FAQ/snom M/update using dect snom com
From Snom User Wiki
To update the snom M-series, you can either use your own web server or the snom M-series update server. For information on using your own web server, please see the Firmware page.
Note: If you don't specify the "Update firmware path" the snom M-series update server always uses the latest stable build of a version. The available firmware versions are listed in the table below.
How to Update snom M-Series phones Using the snom M-Series Update Server
- Please open the web user interface of your base station. (If you don't know the IP address, press the menu key and then type *47* on the keypad. If the handset has detected more than one base station, please compare the MAC address shown on the IP search screen with the MAC address on your base station.)
- Select Firmware Update in the left navigation menu.
- Use the settings Recommended Values from the table below :
Setting Name Valid Values Recommended Values Details Firmware update server address: http://dect.snom.com http://dect.snom.com http://dect.snom.com without trailing slash (/)
Firmware path: - Please leave the text field blank if you want to update to the latest stable release
M65:Required Version
- 324
- 355
324 Firmware versions available:
- 324 (HSV324B9)
- 355 Release Condidate (HSV324B19)
Note: This field will only appear if one or more M65 handsets are registered to the base station.
M85:Required Version
- 324
- 355
324 Firmware versions available:
- 324 (HSV324B9)
- 355 Release Condidate (HSV324B19)
Note: This field will only appear if one or more M85 handsets are registered to the base station.
M25:Required Version
- 324
- 355 (beta)
324 Firmware versions available:
- 324 (HSV324B9)
- 355 Release Condidate (HSV324B19)
Note: This field will only appear if one or more M25 handsets are registered to the base station.
Update base stations: Update this base station only
Update all Base StationsUpdate this base station only Not applicable to M300. For M700, use Update all base stations in multicell installation when you want to update all chained base stations.
Update Base Stations: Required Version
- 324
- 355
324 Firmware versions available:
- 324 (BSV324B12) if you have left the text field of Firmware path empty
- 355 Release Condidate (BSV355B19)
- Enter the firmware update server address and any required handset and repeater firmware versions shown on the page.
- Click on the Save/Start Update button to save the new values.
- In the Update Base Stations section, select one of the radio buttons. The default is Update this Base Station only.
- Enter the firmware version for updating the base station in the text field of Required Version.
- Click on the Start Update button to start the base station update.
NOTE:
The base station update may take up to 10 min.
Handset updates will start the next time each respective handset is placed into the charger.