FAQ/snom M/update using dect snom com

From Snom User Wiki

< FAQ
Revision as of 13:57, 26 March 2015 by IT (Talk | contribs)
Jump to: navigation, search

To update the snom M-series, you can either use your own web server or the snom M-series update server. For information on using your own web server, please see the [M700 Firmware] page.

Note: The snom M-series update server always uses the latest build of a version. The available firmware versions are listed in the table below.

File:Firmware_update_m700.PNG

How to update snom M-Series phones using the snom M-Series Update Server

  1. Please open the web user interface of your base station. (If you don't know the IP address, press the menu key and then type *47* on the keypad. If the handset has detected more than one base station, please compare the MAC address shown on the IP search screen with the MAC address on your base station.)
  2. Select Firmware Update in the left navigation menu.
  3. Use the settings Recommended Values from the table below :
Setting Name Recommended Values Details
Firmware update server address: http://dect.snom.com

http://dect.snom.com

Firmware path: (blank)

Please leave this field blank!

M65:Required Version 323

Firmware versions available:

  • 318 (HSV318B09)
  • 323 (HSV323B11)

Note: This field will only appear if one or more M65 handsets are registered to the base station.

M25:Required Version 323

Firmware versions available:

  • 318 (HSV318B09)
  • 323 (HSV323B11)

Note: This field will only appear if one or more M25 handsets are registered to the base station.

Update base stations: Update this base station only
  • Update this Base Station only
  • Update all Base Stations
Update Base Stations: Required Version 323

Firmware versions available:

  • 318 (BSV318B10)
  • 323 (BSV323B12)
  1. After you filled out the first set of Settings, please click on Save/Start Update button to save the new values.
  2. Now fill out Required Version which is under Update Base Stations and press the Start Update button to initiate the Base Station Update Procedure

NOTE: The handset update will start the next time the handset is placed into the charger. The base station update may take up to 10 min.

Personal tools
Interoperability