FAQ/snom M/update using dect snom com

From Snom User Wiki

< FAQ
Revision as of 13:22, 23 January 2015 by Beckmatt (Talk | contribs)
Jump to: navigation, search

To update the snom M-Series you are able to use your own web server or the snom M-Series Update Server.

Note: snom M-Series Update Server has always only the latest build of a version. More detailed information about the firmware versions are in the table below.

File:Firmware_update_m700.PNG

How to update snom M-Series phones using the snom M-Series Update Server

1.) Please open the web user interface of your base station. (If you don't know the IP address please enter the following keys: MENU * 4 7 * )

2.) Select Firmware Update in the left navigation menu

3.) Use the settings Recommended Values from the table below :

Setting Name Recommended Values Valid Values
Firmware update server address: http://dect.snom.com

http://dect.snom.com

Firmware path: (blank)

Please leave this field blank!

M65:Required Version 323

Firmware versions available:

  • 318 (HSV318B09)
  • 323 (HSV323B11)

Note: This field will only appear if one or more M65 handsets are registered to the base station.

M25:Required Version 323

Firmware versions available:

  • 318 (HSV318B09)
  • 323 (HSV323B11)

Note: This field will only appear if one or more M25 handsets are registered to the base station.

Update base stations: Update this base station only
  • Update this Base Station only
  • Update all Base Stations
Update Base Stations:Required Version 323

Firmware versions available:

  • 318 (BSV318B10)
  • 323 (BSV323B12)

4.) After you filled out the first set of Settings, please click on Save/Start Update button, to save the new values.

5.) Now fill out Required Version which is under Update Base Stations and press the Start Update button to initiate the Base Station Update Procedure

NOTE: Handset update will start when the handset is placed into the charger. Base station update may take up to 10 min.

Personal tools
Interoperability