FAQ/How do I remote control the I/O pins of the snom PA1?

From Snom User Wiki

Revision as of 15:58, 16 November 2018 by Berterp (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Languages: English • Deutsch

You are able to remote control the I/O pins only with the Door Phone Aplication Firmware.



Your snomPA1 need to have a registred extension to use this. Your PBX must be able to support outband RFC2833 DTMF.

Pin On Off
1 1# 1*
2 2# 2*
3 3# 3*
4 4# 4*

Via webbrowser

Change <snomPA1 IP> to your IP and <pin number> to the pin you like to change the state.

Set pin to on

http://<snomPA1 IP>/dummy.htm?pa1_pin<pin number>=on&settings=save

Set pin to off

http://<snomPA1 IP>/dummy.htm?pa1_pin<pin number>=off&settings=save

wget example

wget -q -O /dev/null\&settings=save
Personal tools