FAQ/How do I remote control the I/O pins of the snom PA1?

From Snom User Wiki

< FAQ(Difference between revisions)
Jump to: navigation, search
(Via DTMF)
 
Line 3: Line 3:
=Via DTMF=
=Via DTMF=
-
Your snomPA1 need to have a registred extension to use this. Your PBX must be able to support outband DTMF.
+
Your snomPA1 need to have a registred extension to use this. Your PBX must be able to support outband RFC2833 DTMF.
{| border="1" cellpadding="20" cellspacing="0"
{| border="1" cellpadding="20" cellspacing="0"
Line 26: Line 26:
|4*
|4*
|}
|}
-
 
=Via webbrowser=
=Via webbrowser=

Latest revision as of 15:58, 16 November 2018

Languages: English • Deutsch

You are able to remote control the I/O pins only with the Door Phone Aplication Firmware.

Contents

Via DTMF

Your snomPA1 need to have a registred extension to use this. Your PBX must be able to support outband RFC2833 DTMF.

Pin On Off
1 1# 1*
2 2# 2*
3 3# 3*
4 4# 4*

Via webbrowser

Change <snomPA1 IP> to your IP and <pin number> to the pin you like to change the state.

Set pin to on

http://<snomPA1 IP>/dummy.htm?pa1_pin<pin number>=on&settings=save

Set pin to off

http://<snomPA1 IP>/dummy.htm?pa1_pin<pin number>=off&settings=save

wget example

wget -q -O /dev/null http://172.21.0.104/dummy.htm?pa1_pin4=on\&settings=save
Personal tools
Interoperability