FAQ/How do I register an additional m3 with the gateway

From Snom User Wiki

< FAQ(Difference between revisions)
Jump to: navigation, search
(New page: ==Answer== #Press the Reset button on the rear of the gateway to enable registration mode. #In the Main menu, choose Settings, and then press the Ok key. #Choose System settings, press ...)
 
(6 intermediate revisions not shown)
Line 1: Line 1:
 +
{{Languages|FAQ/How do I register an additional m3 with the gateway}}
==Answer==
==Answer==
-
 
#Press the Reset button on the rear of the gateway to enable registration mode.  
#Press the Reset button on the rear of the gateway to enable registration mode.  
#In the Main menu, choose Settings, and then press the Ok key.  
#In the Main menu, choose Settings, and then press the Ok key.  
#Choose System settings, press the Ok key, and then choose Handset settings. Press the OK key.  
#Choose System settings, press the Ok key, and then choose Handset settings. Press the OK key.  
# Choose Register handset, press the Ok key, and then press the Yes soft key when prompted to register handset.
# Choose Register handset, press the Ok key, and then press the Yes soft key when prompted to register handset.
-
[[Category:snom m3]]
+
[[Category:FAQ:snom_m3]]

Latest revision as of 11:50, 11 March 2009

Languages: English • Deutsch

Answer

  1. Press the Reset button on the rear of the gateway to enable registration mode.
  2. In the Main menu, choose Settings, and then press the Ok key.
  3. Choose System settings, press the Ok key, and then choose Handset settings. Press the OK key.
  4. Choose Register handset, press the Ok key, and then press the Yes soft key when prompted to register handset.
Personal tools
Interoperability