Settings/rtp port start
From Snom User Wiki
< Settings
- Web User Interface
: Advanced - Advanced Network (Section): Dynamic RTP port start
: Advanced - SIP/RTP (Tab) - RTP/RTCP(Section):Dynamic RTP port start
: Advanced - SIP/RTP (Tab) - RTP/RTCP(Section):Dynamic RTP port start
- Description
- If you want to set up the port range out of which the RTP ports will be dynamically taken, specify the start port and end port number, respectively, in these fields.
- VALIDVALUE
- Integer, valid port numbers
- DEFAULTVALUE
- 49152
Categories: Setting:snom3x0 | Setting:snom8xx | Setting:snom MP | Setting:RTP
Products > Configuration
Products > Configuration
Products > Configuration
Products > Configuration
Products > Features > Configuration features > Setting
Products > Features > Configuration features > Setting
Products > Features > Configuration features > Setting
Products > Features > Configuration features > Setting > Setting:RTP
Products > IP phones > Snom3x0 > Setting:snom3x0
Products > IP phones > Snom8xx > Setting:snom8xx
Products > Network > RTP
Products > SIP conference phone > Snom MeetingPoint > Setting:snom MP
