Web Interface/Identities/Login

Identity active[user_active[1-x]]

Web User Interface:
- : Identities - Login Information(Section): Identity active
- : Identities - Login Information(Section): Identity active
Description: This identity can be disabled by disabling this option. This means this identity is not longer registered anymore.
Valid values: <on>, <off>
Default value: on

Displayname [user_realname[1-x]]

Web User Interface:
- : Identities - Login Information(Section): Displayname
- : Identities - Login Information(Section): Displayname
Description: Set the name you would like to associate with each line, e.g. “John Smith”. This information is also sent out to any party you are calling.
Valid values: e.g. <Jim Testa>
Default value: blank

Account[user_name[1-x]

Web User Interface:
- : Identities - Login Information(Section): Account
- : Identities - Login Information(Section): Account
Description: This is the account with which you register to a SIP registrar/proxy. It could be alphanumeric, e.g. “js”, or based on digits like “445”.
Valid values: e.g. for <sip:abc@company.de>, the user_name[1-x] would be abc.
Default value: blank

Password[user_pass[1-x], user_hash[1-x]]

Web User Interface:
- : Identities - Login Information(Section): Password
- : Identities - Login Information(Section): Password
Description: This is the password to be used for challenge responses. In order to protect them from unauthorized use, passwords are not displayed in their true form, but as a series of asterisks.
Valid values: arbitrary string, e.g. <company, 456876, answerIs42, a64bd7c29de0f23ba64bd7c29de0f23b0>
Default value: blank
Note: A setting for registrar authentication. The username and the password can usually be set up on the proxy and registrar, user_hash is a MD5 encrypted password, which can be used instead of user_pass.

Registrar[user_host[1-x] ]

Web User Interface:
- : Identities - Login Information(Section): Registrar
- : Identities - Login Information(Section): Registrar
Description: Specify the IP or DNS address of the registrar/proxy where you want to register this account. After a successful registration, the registrar knows how to reach this speciﬁc identity and can route requests (e.g., incoming calls) from other registered parties to this phone.
Valid values: e.g. for <sip:abc@company.de> the user_host would be <company.de>.
Default value: blank

Outbound Proxy[user_outbound[1-x] ]

Web User Interface:
- : Identities - Login Information(Section): Outbound Proxy
- : Identities - Login Information(Section): Outbound Proxy
Description: Specify the outbound proxy in this ﬁeld(format: addr:port). This is to ensure that all SIP packets are going via this speciﬁed communication point.
Valid values: e.g. <proxy.company.de>, <192.168.0.24>
Default value: blank

Authentication Username[user_pname[1-x] ]

Web User Interface:
- : Identities - Login Information(Section): Authentication Username
- : Identities - Login Information(Section): Authentication Username
Description: Registrar environments may need different user names for registration and authentication.
Valid values: arbitrary string, e.g. abc@xyz.de
Default value: blank

Mailbox[user_mailbox[1-x] ]:

Web User Interface:
- : Identities - Login Information(Section): Mailbox
- : Identities - Login Information(Section): Mailbox
Description: If you have set up a mailbox, specify the account name for that mailbox here to associate it with this particular SIP identity. This is important for contacting your mailbox when the MWI message does not include the proper mailbox SIP URI.
Valid values: e.g. <abc> or <sip:abc@mailbox.bla.com>.
Default value: Blank

Ringtone[user_ringer[1-x]]

Web User Interface:
- : Identities - Login Information(Section): Ringtone
- : Identities - Login Information(Section): Ringtone
Description: Select a ring tone from this pull-down menu that will alert you when a call comes in for this particular identity.
Valid values: <Ringer1>, <Ringer2>, <Ringer3>, <Ringer4>, <Ringer5>, <Ringer6>, <Ringer7>, <Silent>, <Custom>
Default value: Ringer1

Custom Melody URL[user_custom[1-x]]

Web User Interface:
- : Identities - Login Information(Section): Custom Melody URL
- : Identities - Login Information(Section): Custom Melody URL
Description: Specify an URL to your own ringing melody. The type of ﬁle that should be supplied to the phone is: „PCM 8 kHz 16 bit/sample (linear) mono WAV”. This only has an effect when you have chosen “Custom Melody” from the “Ringtone” pull-down menu and when the incoming call matches this SIP identity.
Valid values: The HTTP(S) URL may point to a standard 8 kHz mono 16-bit sample WAV file.
Default value: blank
Example Ringtones: Melody 1 Melody 2 Melody 3 Melody 4 Melody 5 Melody 6 Melody 7 Melody 8

Display text for idle screen [user_idle_text[1-x]]

Web User Interface:
- : Identities - Login Information(Section): Display text for idle screen
- : Identities - Login Information(Section): Display text for idle screen
Description: If you enter a name in this ﬁeld, then this name will be shown on the idle screen associated with this particular line instead of the name you have entered in the “Displayname” ﬁeld, if any. This information is not sent out to anyone, but is merely shown on the phone’s display for your information.
Valid values: e.g. provider-abc.
Default value: blank

Ring After Delay (sec) [ring_after_delay[1-x] ]

Web User Interface:
- : Identities - Login Information(Section): Ring After Delay
- : Identities - Login Information(Section): Ring After Delay
Description: The phone delays playing the ringer for the given amount of seconds. But the message LED still rings from the beginning.
Valid values: Integer value, e.g. <10>
Default value: (blank)

Record Missed Calls[record_missed_calls[1-x] ]

Web User Interface:
- : Identities - Login Information(Section): Record Missed Calls
- : Identities - Login Information(Section): Record Missed Calls
Description: Should be disabled, if incoming calls to this identity should not be taken into account for the number of missed calls.
Valid values: <on>, <off>
Default value: on