Web Interface/Advanced/Phone Behavior

From Snom User Wiki

< Web Interface | Advanced

Jump to: navigation, search

Web User Interface: : Advanced - Phone Behavior (Section): Call Completion; : Advanced - Behavior (Tab) - Phone Behavior (Section): Call Completion; : Advanced - Behavior (Tab) - Phone Behavior (Section): Call Completion
Phone User Interface: press "Settings" - Phone Behaviour; press "Settings" - Phone Behaviour; press "Menu" - Call Features/Outgoing Calls; press "Menu" - Call Features/Outgoing Calls
XML Syntax: Settings/Phone Behavior/xml
Description: Turning this setting to “on” will prompt the user to activate call completion, if possible, while calling a number (see the CC soft key). When the called party becomes available again, your phone will be able to automatically redial the number. CCNR (on not reachable) as well as CCBS (on busy) is supported.
VALIDVALUE: <on>, <off>
DEFAULTVALUE: off

Web User Interface: : Advanced - Phone Behavior (Section): Peer to Peer Call Completion; : Advanced - Behavior (Tab) - Phone Behavior (Section): Peer to Peer Call Completion; : Advanced - Behavior (Tab) - Phone Behavior (Section): Peer to Peer Call Completion
XML Syntax: Settings/Phone Behavior/xml
Description: Disable it if call completion is handled by the SIP proxy. Otherwise the phones are handling it directly between each other.
VALIDVALUE: <on>, <off>
DEFAULTVALUE: on

IDNA (RFC 3490) Support [support_idna]

Web User Interface: : Advanced - Phone Behavior (Section): IDNA (RFC 3490) Support; : Advanced - Behavior (Tab) - Phone Behavior (Section): IDNA (RFC 3490) Support; : Advanced - Behavior (Tab) - Phone Behavior (Section): IDNA (RFC 3490) Support ;XML Syntax
:Settings/Phone Behavior/xml
Description: Switch on support for Internationalizing Domain Names in Applications (IDNA). IDNA support is the ability to handle domain names including international special characters.
VALIDVALUE: <on>, <off>
DEFAULTVALUE: off

Web User Interface: : Advanced - Phone Behavior (Section): Auto Dial; : Advanced - Behavior (Tab) - Phone Behavior (Section): Auto Dial; : Advanced - Behavior (Tab) - Phone Behavior (Section): Auto Dial
Phone User Interface: press "Settings" - Phone Behaviour; press "Settings" - Phone Behaviour; press "Menu" - Call Features/Outgoing Calls; press "Menu" - Call Features/Outgoing Calls
XML Syntax: Settings/Phone Behavior/xml
Description: This setting is switched off by default. You can set a timeout after which a number is dialed automatically without pressing or taking the handset off the hook.
VALIDVALUE: <off>, <2> , <5>, <10>, <15>
DEFAULTVALUE: off

Overlap Dialing [overlap_dialing]

Web User Interface: : Advanced - Phone Behavior (Section): Overlap Dialing; : Advanced - Behavior (Tab) - Phone Behavior (Section): Overlap Dialing; : Advanced - Behavior (Tab) - Phone Behavior (Section): Overlap Dialing ;XML Syntax
:Settings/Phone Behavior/xml
Description: If the connected SIP proxy supports this function, it can be enabled here. This will lead to the phone starting to dial each time a digit is entered and the SIP proxy replying with „Number incomplete“ until such time as the number has been entered and the call can be initiated successfully without the enter key having to be pressed.
VALIDVALUE: <on>, <off>
DEFAULTVALUE: off

Web User Interface: : Advanced - Phone Behavior (Section): Number Guessing; : Advanced - Behavior (Tab) - Phone Behavior (Section): Number Guessing

: Advanced - Behavior (Tab) - Phone Behavior (Section): Number Guessing
Phone User Interface: press "Settings" - Phone Behaviour; press "Settings" - Phone Behaviour; press "Menu" - Call Features/Outgoing Calls; press "Menu" - Call Features/Outgoing Calls
XML Syntax: Settings/Phone Behavior/xml
Description: Here, the number guessing functionality can be enabled. This is the automatic number completion which will begin after you have entered the minimum number of digits.
VALIDVALUE: <on>, <off>
DEFAULTVALUE: off

Web User Interface: : Advanced - Phone Behavior (Section): Number Guessing Minimum Length; : Advanced - Behavior (Tab) - Phone Behavior (Section): Number Guessing Minimum Length

: Advanced - Behavior (Tab) - Phone Behavior (Section): Number Guessing Minimum Length
XML Syntax: Settings/Phone Behavior/xml
Description: Specify the minimum number of digits that must be entered before 'Number Guessing' will begin. Since versions 8.2.9 and 8.3.3 this setting also defines, when ldap-lookup should begin when entering a number.
VALIDVALUE: number of digits
DEFAULTVALUE: 4

Web User Interface: : Advanced - Phone Behavior (Section): Block URL Dialing; : Advanced - Behavior (Tab) - Phone Behavior (Section): Block URL Dialing; : Advanced - Behavior (Tab) - Phone Behavior (Section): Block URL Dialing
XML Syntax: Settings/Phone Behavior/xml
Description: You can block the dialing of SIP URLs by turning this setting on. In this case only numeric numbers will be allowed as input.
VALIDVALUE: on; off
DEFAULTVALUE: off

Deny All Feature [deny_all_feature ]

Web User Interface: : Advanced - Phone Behavior (Section): Deny All Feature; : Advanced - Behavior (Tab) - Phone Behavior (Section): Deny All Feature; : Advanced - Behavior (Tab) - Phone Behavior (Section): Deny All Feature
Phone User Interface: press "Settings" - Phone Behaviour; press "Settings" - Phone Behaviour
XML Syntax: Settings/Phone Behavior/xml
Description: When this feature is set to “on”, the “Deny Call” function will be available on the display when calls are coming in, so that key any undesirable incoming numbers may be put on the “Deny List”.
VALIDVALUE: <on>, <off>
DEFAULTVALUE: on

Web User Interface: : Advanced - Phone Behavior (Section): Audio Device Indicator; : Advanced - Behavior (Tab) - Phone Behavior (Section): Audio Device Indicator; : Advanced - Behavior (Tab) - Phone Behavior (Section): Audio Device Indicator
XML Syntax: Settings/Phone Behavior/xml
Description: Show the currently activated audio device at the display <on>.
VALIDVALUE: on; off
DEFAULTVALUE: on

XML syntax:

XML Syntax: Settings/Phone Behavior/xml
<audio_device_indicator perm="PERMISSIONFLAG">VALIDVALUE</audio_device_indicator>

Web User Interface: : Advanced - Phone Behavior (Section): Challenge Response on Phone; : Advanced - Behavior (Tab) - Phone Behavior (Section): Challenge Response on Phone; : Advanced - Behavior (Tab) - Phone Behavior (Section): Challenge Response on Phone
Description: As explained in an earlier chapter,phones can handle challenge responses on the phone. Turning this setting off will disable this feature and you will only be able to handle authentication through the web interface of the phone.
VALIDVALUE: on; off
DEFAULTVALUE: on

Enable Intercom [intercom_enabled]

Web User Interface: : Advanced - Phone Behavior (Section): Enable Intercom; : Advanced - Behavior (Tab) - Phone Behavior (Section): Enable Intercom; : Advanced - Behavior (Tab) - Phone Behavior (Section): Enable Intercom ;XML Syntax
:Settings/Phone Behavior/xml
Description: Here, you can explicitly select whether or not you want to participate in the intercom functionality. If you enable it, the intercom functionality can be programmed onto the function keys set to type “Intercom”. Usually, intercom uses authentication, but if the identity has registered at the registrar without authentication, intercom also works without authentication.
VALIDVALUE: <on>, <off>
DEFAULTVALUE: off

Internal Link:Programmable Keys

Web User Interface: : Advanced - Phone Behavior (Section): ´Answer After´ Policy; : Advanced - Behavior (Tab) - Phone Behavior (Section): ´Answer After´ Policy; : Advanced - Behavior (Tab) - Phone Behavior (Section): ´Answer After´ Policy
XML Syntax: Settings/Phone Behavior/xml
Description: If the Answer-After SIP header should be taken into account in order to allow auto answering behavior like intercom, this option may be set to "always" or "only in idle". With "off" it is disabled.
VALIDVALUE: <off>; <idle>; <always>
DEFAULTVALUE: always; from 7.1.39: off

CMC Feature (Client Matter Code) [cmc_feature ]

Web User Interface: : Advanced - Phone Behavior (Section): CMC Feature (Client Matter Code); : Advanced - Behavior (Tab) - Phone Behavior (Section): CMC Feature (Client Matter Code); : Advanced - Behavior (Tab) - Phone Behavior (Section): CMC Feature (Client Matter Code) ;XML Syntax
:Settings/Phone Behavior/xml
Description: When this setting is turned on, the user is offered a soft key “CMC” during a call; its use sends a code to the server using the INFO message in SIP. This code can later be used for billing or bookkeeping along with the call ID of that call.
VALIDVALUE: <on>, <off>
DEFAULTVALUE: off

Web User Interface: : Advanced - Phone Behavior (Section): Dialog-Info Call Pickup; : Advanced - Behavior (Tab) - Phone Behavior (Section): Dialog-Info Call Pickup; : Advanced - Behavior (Tab) - Phone Behavior (Section): Dialog-Info Call Pickup
Description: By turning this setting on, the user will be offered a Calls Screen when a monitored extension receives a call and is in the ringing state. Simultaneously - after 10 seconds - an audible notification can be heard when the setting pickup_indication has been enabled in advance.; The display will change from the idle state to show the source and destination of that call and the user can pick up the call by selecting the list entry.; The pickup offer is available as long as the destination is ringing; it will disappear when the user of the phone offering pickup presses, when the call is connected, when the call is canceled by the caller, or when a third party picks up the call.
VALIDVALUE: on; off
DEFAULTVALUE: off

Web User Interface: : Advanced - Phone Behavior (Section): Disconnect on Hook; : Advanced - Behavior (Tab) - Phone Behavior (Section): Disconnect on Hook; : Advanced - Behavior (Tab) - Phone Behavior (Section): Disconnect on Hook ;XML Syntax
:Settings/Phone Behavior/xml
Description: Sometimes it is useful to disable the disconnection of a call when the handset is placed on hook, e.g., during conference calls or in handsfree-mode, etc. This is achieved by turning this setting off.
VALIDVALUE: on; off
DEFAULTVALUE: off

Web User Interface: : Advanced - Phone Behavior (Section): Call join on Xfer (2 calls); : Advanced - Behavior (Tab) - Phone Behavior (Section): Call join on Xfer (2 calls); : Advanced - Behavior (Tab) - Phone Behavior (Section): Call join on Xfer (2 calls)
XML Syntax: Settings/Phone Behavior/xml
Description: When this feature is turned to “on”, you will connect an incoming call to, for example, a colleague you already have on hold by pressing. You will not be able to pick one of severals calls on hold to transfer the call to. If this is your usual scenario, set this feature to select the calls to be to “off” and use the function keys joined! Press and to join them.
VALIDVALUE: <on>, <off>
DEFAULTVALUE: off

Web User Interface

: Advanced - Phone Behavior (Section): AOC Amount Display

: Advanced - Behavior (Tab) - Phone Behavior (Section): AOC Amount Display

XML Syntax

Settings/Phone Behavior/xml

Description

If your provider supports “Advice of Charge” (AOC) information (i.e., the costs for your call) during or at the end of the call, you can turn on this feature by selecting one of the following options:

Select “Charged” to show the accumulated amount of the current call on the display
Select “Balance” to show the amount remaining on your account.

VALIDVALUE: off; charged; balance
DEFAULTVALUE: off

Web User Interface: : Advanced - Phone Behavior (Section): AOC Pulse currency; : Advanced - Behavior (Tab) - Phone Behavior (Section): AOC Pulse currency; : Advanced - Behavior (Tab) - Phone Behavior (Section): AOC Pulse currency ;XML Syntax
:Settings/Phone Behavior/xml
Description: Sets the currency symbol that will be shown next to the amount (e.g., $).
VALIDVALUE: a character
DEFAULTVALUE: blank

Web User Interface: : Advanced - Phone Behavior (Section): AOC Cost/Pulse; : Advanced - Behavior (Tab) - Phone Behavior (Section): AOC Cost/Pulse; : Advanced - Behavior (Tab) - Phone Behavior (Section): AOC Cost/Pulse
XML Syntax: Settings/Phone Behavior/xml
Description: Specify how much money one pulse costs (e.g., 0.12 means 12 cents per pulse)
VALIDVALUE: e.g. 0.12, 1, 0.02
DEFAULTVALUE: 1

Partial Number Lookup [partial_lookup]

Web User Interface: : Advanced - Phone Behavior (Section): Partial Number Lookup; : Advanced - Behavior (Tab) - Phone Behavior (Section): Partial Number Lookup; : Advanced - Behavior (Tab) - Phone Behavior (Section): Partial Number Lookup ;XML Syntax
:Settings/Phone Behavior/xml
Description: When this option is set to ‘on’, the phone tries to match parts of the incoming call number to numbers stored in internal lists like the address book or dial lists and displays the name belonging to the first number that matches partially.
VALIDVALUE: <on>, <off>
DEFAULTVALUE: off

Retrieved from "http://wiki.snom.com/Web_Interface/Advanced/Phone_Behavior"

Web Interface/Advanced/Phone Behavior

From Snom User Wiki

Views

Personal tools

knowledgebase

VoIP Products

Documentation

Firmware

Configuration

Interoperability

Search

Toolbox