Snom m3/Firmware/Version Check

From Snom User Wiki

Jump to: navigation, search

In idle mode:

  • Press the Volume up key on the left side of the snom m3. The following screen appears on the display:
System status

--Network--
MAC Addresss
00-04-13-2a-XX-XX
IP address
192.168.X.X (D)
Boot Status
OK

  • Press the navigation "down" key until the "Gateway" information is displayed. The installed firmware version can be seen behind "Sw":
System status

--Gateway--
Version
Sw: 01.07 Hw: 1
Serial no.
255

Personal tools
Interoperability