Settings/vlan port tagging

From Snom User Wiki

Jump to: navigation, search
WEB USER INTERFACE
V7: Advanced - QoS/Security (Tab) - VLAN(Section):Un-/Tag VLAN traffic to/from specific switch (Reboot required)
V8: Advanced - QoS/Security (Tab) - VLAN(Section):Un-/Tag VLAN traffic to/from specific switch (Reboot required)
PHONE USER INTERFACE
N/A
FIRMWARE VERSIONS
V7  V8  
XML CONFIGURATION
<vlan_port_tagging perm="PERMISSIONFLAG">VALIDVALUE</vlan_port_tagging>
DESCRIPTION
Snom phones of 8xx-series have a internal ethernet-switch capable of handling vlan (set tags and unset them)

This setting defines whether the switch will handle the vlan tagging or not.

Handling means that pakets from the internal ports to the network are tagged (vlan id is added) and tagged pakets (vlan set) from the network are untagged (vlan id is removed) and assigned to the port they belong (selection by vlan id).

Example: Pc-port is configured vlan 3 and the option is set to on, pakets arriving from the pc on the pc-port are tagged with vlan 3 and sent to the network.
Pakets arriving from the network containing vlan id 3 will be assigned/send to pc-port, but before that the vlan id (3) is removed. So the pc will receive a paket without vlan id.


Network --- VLAN ID 3 --- phone with int. switch ---- No Tag ---- PC


On: Phone-internal switch handels the vlan-pakets.
To Network direction -> vlan ids are set, From Network -> vlan id are unset

Off: phone internal switch does not touch the pakets.
Independend of vlan id set or not, pakets are not changed, connected device has to take care.

VALIDVALUE
on
off
DEFAULTVALUE
off
FURTHER INFORMATION
VLAN
Personal tools
Interoperability