Settings/user savp

From Snom User Wiki

Jump to: navigation, search
WEB USER INTERFACE
V7 (7.3.7): Identities - RTP Settings(Section): RTP/SAVP
V8: Identities - RTP Settings(Section): RTP/SAVP
PHONE USER INTERFACE
N/A
FIRMWARE VERSIONS
V7  V8  
Starting versions: 7.3.7
XML CONFIGURATION
<user_savp idx="INDEX" perm="PERMISSIONFLAG">VALIDVALUE</user_savp>
DESCRIPTION
This setting is effective only when RTP encryption (SRTP) is also enabled and is used to specify whether the use of the RTP/SAVP profile by the phone should be off (for backward compatibility), optional or mandatory.
When this setting is set to "mandatory" the phone will offer and accept only SDPs that contain m= lines with an audio profile of RTP/SAVP.
When this setting is set to "optional", the phone will offer SDPs containing two m= lines, one with an audio profile of RTP/SAVP the other with an audio profile of RTP/AVP and it will accept SDPs containing m= lines with either profile. The RTP/SAVP profile, being the preferred one, is listed first.
Since some SIP proxies cannot handle RTP/SAVP profiles or multiple m= lines this setting may also be turned off. In this case the phone will send SDPs containing RTP/AVP audio profiles only. Whether or not the crypto attribute is included depends on whether RTP encryption is on or off.
Note: When RTP encryption is turned off this setting has no effect.</p>
VALIDVALUE
<off>, <optional>, <mandatory>
DEFAULTVALUE
off
FURTHER INFORMATION
RTP
Personal tools
Interoperability