Settings/user dp exp

From Snom User Wiki

Jump to: navigation, search
WEB USER INTERFACE
V6: Identities - SIP(Section): Dial Plan String
V7: Identities - SIP Settings(Section):Dial Plan String
V8: Identities - SIP Settings(Section):Dial Plan String
PHONE USER INTERFACE
N/A
FIRMWARE VERSIONS
V6  V7  V8  
XML CONFIGURATION
<user_dp_exp perm="PERMISSIONFLAG">VALIDVALUE</user_dp_exp>
DESCRIPTION
ENUM means that a conventional E.164 number (normal phone number) is mapped to a SIP URI so that a pure IP call can be started instead of an IP/PSTN call. To use ENUM lookup not only this option has to be enabled, but also below options Countrycode and Areacode have to be setup properly before. Both options are used to build the above Dial Plan String which is mandatory to make the ENUM lookup work.
VALIDVALUE
"ENUM 49 30" where
ENUM = enables ENUM lookups
49 = The country code for ENUM lookup (e.g., 49 for Germany)
30 = The area code for ENUM lookup (e.g., 30 for Berlin)
DEFAULTVALUE
blank
NOTE
Part of the dialplan in order to set up ENUM support. "ENUM 49 30" means the phone resides in the contry code 49 and area code 30 and is setup to use ENUM lookup.
FURTHER INFORMATION
Dial Plan
ENUM
Personal tools
Interoperability