Settings/send prack
From Snom User Wiki
< Settings
- WEB USER INTERFACE
- V6: Advanced - Advanced Network (Section): SendPRACK
- V7: Advanced - SIP/RTP (Tab) - SIP(Section):Send PRACK
- V8: Advanced - SIP/RTP (Tab) - SIP(Section):Send PRACK
- PHONE USER INTERFACE
- N/A
- FIRMWARE VERSIONS
- V6 V7 V8
- XML CONFIGURATION
- <send_prack perm="PERMISSIONFLAG">VALIDVALUE</send_prack>
- DESCRIPTION
- Enables/Disables sending Supported:100Rel and by this whether early-dialogs by PRACK will be offered.
Enabling this could be useful if the opposite wants to play music/ring-back-tone or announcements before the call is connected.
- On -> Supported:100Rel will be send (and opposite could initiate Early-Dialog by sending Required:100Rel)
- Off -> Supported:100Rel wont be send (and opposite gets no chance to initiate Early-Dialog)
Note:This does not influences whether the phone itself will send Required:100Rel if from opposite Supported:100Rel is signaled and by this initiating a early-dialog.
This behavior is influenced by require_prack -> see Settings/require_prack.
- VALIDVALUE
- <on>, <off>
- DEFAULTVALUE
- on
- FURTHER INFORMATION
- SIP
Categories: Setting:V6 | Setting:V7 | Setting:V8 | Setting:snom3x0 | Setting:snom8xx | Setting:snom MP | Setting:SIP | Setting:snom PA1
Products > Features
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting > Setting:SIP
Products > Firmware > V6 > Setting:V6
Products > Firmware > V7 > Setting:V7
Products > Firmware > V8 > Setting:V8
Products > IP phones > Snom3x0 > Setting:snom3x0
Products > IP phones > Snom8xx > Setting:snom8xx
Products > Network > SIP
Products > SIP conference phone > Snom MeetingPoint > Setting:snom MP
Products > SIP paging > Snom PA1 > Setting:snom PA1