Settings/redirect time on code
From Snom User Wiki
< Settings
- WEB USER INTERFACE
- V6: Preferences - Redirection (Tab) - Timeout(Section):On Code
- V7: Preferences - CallForwarding (Tab) - Timeout(Section):On Code
- V8: Preferences - CallForwarding (Tab) - Timeout(Section):On Code
- PHONE USER INTERFACE
- N/A
- FIRMWARE VERSIONS
- V6 V7 V8
- XML CONFIGURATION
- <redirect_time_on_code perm="PERMISSIONFLAG">VALIDVALUE</redirect_time_on_code>
- DESCRIPTION
- When set, the given starcode, appended by the redirection target, will be dialed whenever redirection after timeout gets enabled or changes the target.
- Deprecated since 8.7.4, please use Settings/fwd_time_on_code.
- VALIDVALUE
- starcode to be dialed, e.g. *67
- DEFAULTVALUE
- blank
- FURTHER INFORMATION
- Call Forwarding
Categories: Setting:V6 | Setting:V7 | Setting:V8 | Setting:snom3x0 | Setting:snom8xx | Setting:snom MP | Setting:Call Forwarding | Setting:snom PA1
Products > Features > Calling features > Call Forwarding
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting > Setting:Call Forwarding
Products > Firmware > V6 > Setting:V6
Products > Firmware > V7 > Setting:V7
Products > Firmware > V8 > Setting:V8
Products > IP phones > Snom3x0 > Setting:snom3x0
Products > IP phones > Snom8xx > Setting:snom8xx
Products > SIP conference phone > Snom MeetingPoint > Setting:snom MP
Products > SIP paging > Snom PA1 > Setting:snom PA1