Settings/prioritise pbx number lookup
From Snom User Wiki
< Settings
- WEB USER INTERFACE
- V7: Advanced - Behavior(Tab) - Phone Behavior (Section): Prioritise PBX number lookup (available since 7.3.16)
- V8: Advanced - Behavior(Tab) - Phone Behavior (Section): Prioritise PBX number lookup (available since 8.2.2)
- PHONE USER INTERFACE
- N/A
- FIRMWARE VERSIONS
- V7 V8
- Starting versions: obsolete since 8.7.4
- XML CONFIGURATION
- <prioritise_pbx_number_lookup perm="PERMISSIONFLAG">VALIDVALUE</prioritise_pbx_number_lookup>
- DESCRIPTION
- The PBX can include the name of a SIP URI in SIP messages like INVITE. If this setting is disabled, the phone displays the name of the SIP URI from the internal/LDAP directory. If there is no match, the name sent by the PBX is taken. If the setting is enabled, the name sent by the PBX comes prior. See also related setting contact_source_priority. The setting is obsolete since version 8.7.x For having the same effect, just put "Sip” in front of the contact_source_priority list.
- VALIDVALUE
- on
- off
- DEFAULTVALUE
- firmware versions < 8.7.3.15: on
- firmware versions >= 8.7.3.15: off
- FURTHER INFORMATION
- Display_Feature
Categories: Setting:V7 | Setting:V8 | Setting:snom3x0 | Setting:snom8xx | Setting:snom MP | Setting:Display Feature | Setting:snom PA1
Products > Features > Display Feature
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting > Setting:Display Feature
Products > Firmware > V7 > Setting:V7
Products > Firmware > V8 > Setting:V8
Products > Hardware > Display
Products > IP phones > Snom3x0 > Setting:snom3x0
Products > IP phones > Snom8xx > Setting:snom8xx
Products > SIP conference phone > Snom MeetingPoint > Setting:snom MP
Products > SIP paging > Snom PA1 > Setting:snom PA1