Settings/jb min

From Snom User Wiki

Jump to: navigation, search
WEB USER INTERFACE
V7: Advanced - SIP/RTP (Tab) - RTP/RTCP(Section): JB Min
V8: Advanced - SIP/RTP (Tab) - RTP/RTCP(Section): JB Min
PHONE USER INTERFACE
N/A
FIRMWARE VERSIONS
V7  V8  
Starting versions: 7.3.30, 8.2.21, 8.7.5.49, 8.9.3.39
XML CONFIGURATION
<jb_min perm="PERMISSIONFLAG">VALIDVALUE</jb_min>
DESCRIPTION
This is the enhanced jitter buffer minimum value in milliseconds.
That means the jitter buffer will not go below this value. Be careful in selecting this value, as very high values will introduce too much latency.
With V8.9.3 this setting is also used on snom720 and snom760.
VALIDVALUE
A reasonable number for minimum jitter buffer size in milliseconds preferably in multiples of 20 like 20,40,60,...,200 and so on. It should be kept at the ideal value of 40. Values that are too high could introduce too much latency without much benefit.
DEFAULTVALUE
snom3x0: 40
snom720/snom760: 0
FURTHER INFORMATION
Jitter Buffer
Personal tools
Interoperability