Settings/firmware interval
From Snom User Wiki
< Settings
- WEB USER INTERFACE
- N/A
- PHONE USER INTERFACE
- N/A
- FIRMWARE VERSIONS
- V7 V8
- XML CONFIGURATION
- <firmware_interval perm="PERMISSIONFLAG">VALIDVALUE</firmware_interval>
- DESCRIPTION
- This setting specifies the time interval (in minutes) for polling the firmware configuration file. The start time counter is reset on each reboot.
- VALIDVALUE
- amount in minutes (since 8.7.3 all values between 1 and 59 will be replaced by 60 as the minimum value)
- DEFAULTVALUE
- empty (=1440 (24*60) minutes = 24 hours)
- FURTHER INFORMATION
- Firmware
Categories: Setting:V7 | Setting:V8 | Setting:snom3x0 | Setting:snom8xx | Setting:snom MP | Setting:System | Setting:Firmware | Setting:ProvisioningOnly | Setting:snom PA1
Auto Provisioning
Products > Configuration
Products > Documentation > HowTo > HowTo:Auto Provisioning > Auto Provisioning
Products > Features > Configuration features
Products > Firmware
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting > Setting:Firmware
Products > Firmware > Setting > Setting:ProvisioningOnly
Products > Firmware > System > Setting:System
Products > Firmware > V7 > Setting:V7
Products > Firmware > V8 > Setting:V8
Products > IP phones > Snom3x0 > Setting:snom3x0
Products > IP phones > Snom8xx > Setting:snom8xx
Products > SIP conference phone > Snom MeetingPoint > Setting:snom MP
Products > SIP paging > Snom PA1 > Setting:snom PA1
