Settings/disable deflection
From Snom User Wiki
< Settings
- WEB USER INTERFACE
- V6:
- V7: Advanced - SIP/RTP (Tab) - SIP(Section): Disable deflection (code 302)
- V8: Advanced - SIP/RTP (Tab) - SIP(Section): Disable deflection (code 302)
- PHONE USER INTERFACE
- N/A
- FIRMWARE VERSIONS
- V6 V7 V8
- XML CONFIGURATION
- <disable_deflection perm="PERMISSIONFLAG">VALIDVALUE</disable_deflection>
- DESCRIPTION
- A boolean to stop 3xx codes (e.g. 302 Moved temporarily). If the setting is on, a Busy Here is returned. Turning this setting on will also disable Call Deflect.
- VALIDVALUE
- <on>, <off>
- DEFAULTVALUE
- off
- FURTHER INFORMATION
- Call Deflection
Categories: Setting:V6 | Setting:V7 | Setting:V8 | Setting:snom3x0 | Setting:snom8xx | Setting:snom MP | Setting:Call Deflection | Setting:snom PA1
Products > Features > Calling features > Call Deflection > Setting:Call Deflection
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > V6 > Setting:V6
Products > Firmware > V7 > Setting:V7
Products > Firmware > V8 > Setting:V8
Products > IP phones > Snom3x0 > Setting:snom3x0
Products > IP phones > Snom8xx > Setting:snom8xx
Products > SIP conference phone > Snom MeetingPoint > Setting:snom MP
Products > SIP paging > Snom PA1 > Setting:snom PA1
