Settings/disable blind transfer
From Snom User Wiki
< Settings
- WEB USER INTERFACE
- V7: Advanced - SIP/RTP (Tab) - SIP(Section): Disable blind transfer (REFER)
- V8: Advanced - SIP/RTP (Tab) - SIP(Section): Disable blind transfer (REFER)
- PHONE USER INTERFACE
- N/A
- FIRMWARE VERSIONS
- V7 V8
- XML CONFIGURATION
- <disable_blind_transfer perm="PERMISSIONFLAG">VALIDVALUE</disable_blind_transfer>
- DESCRIPTION
- A boolean to disable blind transfer. If it is on, instead of blind transfer, on hitting the transfer key, the only call is put on hold and a prompt offered to make second call and a normal consultative transfer would follow. This setting was introduced for PBXs that dont support REFER.
- VALIDVALUE
- on
- off
- DEFAULTVALUE
- off
- FURTHER INFORMATION
- Transfer
Categories: Setting:V7 | Setting:V8 | Setting:snom3x0 | Setting:snom8xx | Setting:snom MP | Setting:Transfer | Setting:snom PA1
Products > Features > Calling features > Transfer > Setting:Transfer
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > V7 > Setting:V7
Products > Firmware > V8 > Setting:V8
Products > IP phones > Snom3x0 > Setting:snom3x0
Products > IP phones > Snom8xx > Setting:snom8xx
Products > SIP conference phone > Snom MeetingPoint > Setting:snom MP
Products > SIP paging > Snom PA1 > Setting:snom PA1