Settings/call waiting
From Snom User Wiki
< Settings
- WEB USER INTERFACE
- V6: Advanced - Audio (Section): Call Waiting Indication
- V7: Advanced - Audio (Tab) - Audio(Section):Call Waiting Indication
- V8: Advanced - Audio (Tab) - Audio(Section):Call Waiting Indication
- since 8.7.5.9: Web Interface/V8/Identities#SIP - SIP (Tab):Call Waiting Indication
- PHONE USER INTERFACE
- V7 V8
- Snom300: Navigation Key Down - Phone Behaviour
- Snom320: Navigation Key Right or press "Settings" - Phone Behaviour
- Snom360: press "Settings" - Phone Behaviour
- Snom370: press "Settings" - Phone Behaviour
- Snom820: press "Menu" - Call Features/Incoming Calls
- Snom870: press "Menu" - Call Features/Incoming Calls
- XML Syntax
- <call_waiting perm="PERMISSIONFLAG">VALIDVALUE</call_waiting>
- FIRMWARE VERSIONS
- V6 V7 V8
- XML CONFIGURATION
- <call_waiting perm="PERMISSIONFLAG">VALIDVALUE</call_waiting>
- DESCRIPTION
- Call Waiting Indication combines two functions:
- "Call Waiting (CW)" can be enabled ("on", "visual only", "ringer") or disabled ("off"). This function allows the phone to receive more than one call at one time.
- "Call Waiting Indication (CWI)" If Call Waiting is enabled ("on", "visual only", "ringer") the incoming caller extension is displayed in the lower left corner of the display. A short knocking signal can be heard simultaneously in the background of your current active call indicating another incoming call.
- Starting with 8.7.5.9 Call Waiting setting is per identity.
- Starting with 10.1.33.33 by disabling ("off") Call Waiting the phone will send 486 "Busy Here" also for Dial screen is active (user lifted the handset or started Dialing from Idle) and the call attempt is started (Invite send, Ringback received etc.) In older versions, CW "off" was only covering established calls.
- VALIDVALUE
- on -> Call Waiting enabled -> Visual and audio indication
- visual -> Visual but NO audio indication
- ringer -> same as "on" -> reserved for future ringtone audio indication
- off -> Call Waiting disabled -> only ONE call can be received
- DEFAULTVALUE
- on
- FURTHER INFORMATION
Categories: Setting:V6 | Setting:V7 | Setting:V8 | Setting:snom3x0 | Setting:snom8xx | Setting:snom MP | Setting:Indication Tone | Setting:Call Waiting | Setting:snom PA1
Products > Audio
Products > Features > Audio features > Indication Tone
Products > Features > Calling features > Call Waiting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting > Setting:Call Waiting
Products > Firmware > Setting > Setting:Indication Tone
Products > Firmware > V6 > Setting:V6
Products > Firmware > V7 > Setting:V7
Products > Firmware > V8 > Setting:V8
Products > IP phones > Snom3x0 > Setting:snom3x0
Products > IP phones > Snom8xx > Setting:snom8xx
Products > SIP conference phone > Snom MeetingPoint > Setting:snom MP
Products > SIP paging > Snom PA1 > Setting:snom PA1