Settings/break key
From Snom User Wiki
< Settings
- WEB USER INTERFACE
- N/A
- PHONE USER INTERFACE
- N/A
- FIRMWARE VERSIONS
- V7 V8
- XML CONFIGURATION
- <break_key perm="PERMISSIONFLAG">VALIDVALUE</break_key>
- DESCRIPTION
- Determined if the TRANSFER/BREAK key below the speaker button is acting as TRANSFER key <off> or as BREAK key <on>, which cancels a connected call.
- VALIDVALUE
- on
off - DEFAULTVALUE
- <off>
- FURTHER INFORMATION
- Transfer
Categories: Setting:V7 | Setting:V8 | Setting:snom3x0 | Setting:snom8xx | Setting:snom MP | Setting:Transfer | Setting:ProvisioningOnly | Setting:snom PA1
Auto Provisioning
Products > Configuration
Products > Documentation > HowTo > HowTo:Auto Provisioning > Auto Provisioning
Products > Features > Calling features > Transfer > Setting:Transfer
Products > Features > Configuration features
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting > Setting:ProvisioningOnly
Products > Firmware > V7 > Setting:V7
Products > Firmware > V8 > Setting:V8
Products > IP phones > Snom3x0 > Setting:snom3x0
Products > IP phones > Snom8xx > Setting:snom8xx
Products > SIP conference phone > Snom MeetingPoint > Setting:snom MP
Products > SIP paging > Snom PA1 > Setting:snom PA1
