Settings/auto reboot on setting change

From Snom User Wiki

Jump to: navigation, search
WEB USER INTERFACE
N/A
PHONE USER INTERFACE
N/A
FIRMWARE VERSIONS
V7  V8  
Starting versions: 7.1.33
XML CONFIGURATION
<auto_reboot_on_setting_change perm="PERMISSIONFLAG">VALIDVALUE</auto_reboot_on_setting_change>
DESCRIPTION
This setting may be used to enable the auto reboot feature during provisioning but preserve old behaviour if needed. Some settings need a reboot to get applied (i.e. vlan, dhcp, ip_address, etc.). For details see: Settings that require a reboot
When using this setting in the provisioning file, please remember:
  • A change of this setting takes effect on the settings following it in the provisioned settings file only, so if you like to have it effect all settings in the provisioned settings file, put it at the top of the file.
  • This is a setting as any other one is. If this setting is turned on, it stays on. So after a reboot, the setting is still on. Even if it isn't mentioned at all in the new settings file. If you experience a constantly rebooting phone, set log level to 7 and see (via syslog server) which setting causes the loop.
VALIDVALUE
<on>, <off>
DEFAULTVALUE
off
FURTHER INFORMATION
Auto Provisioning
Personal tools
Interoperability