Settings/auto dial
From Snom User Wiki
< Settings
- WEB USER INTERFACE
- V6: Advanced - Phone Behavior (Section): Auto Dial
- V7: Advanced - Behavior (Tab) - Phone Behavior (Section): Auto Dial
- V8: Advanced - Behavior (Tab) - Phone Behavior (Section): Auto Dial
- PHONE USER INTERFACE
- V7 V8
- Snom360: press "Settings" - Phone Behaviour
- Snom370: press "Settings" - Phone Behaviour
- Snom820: press "Menu" - Call Features/Outgoing Calls
- Snom870: press "Menu" - Call Features/Outgoing Calls
- FIRMWARE VERSIONS
- V6 V7 V8
- XML CONFIGURATION
- <auto_dial perm="PERMISSIONFLAG">VALIDVALUE</auto_dial>
- DESCRIPTION
- This setting is switched off by default. You can set a timeout after which a number is dialed automatically without pressing or taking the handset off the hook.
- Note: Apart from the predefined values in the drop-down form, you can set other values either through provisioning or single HTTP GET requests.
- VALIDVALUE
- <off>, <2> , <5>, <10>, <15>
- DEFAULTVALUE
- off
- FURTHER INFORMATION
- Auto Dial
Categories: Setting:V6 | Setting:V7 | Setting:V8 | Setting:snom3x0 | Setting:snom8xx | Setting:snom MP | Setting:Auto Dial | Setting:snom PA1
Products > Features > Calling features > Auto Dial
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting > Setting:Auto Dial
Products > Firmware > V6 > Setting:V6
Products > Firmware > V7 > Setting:V7
Products > Firmware > V8 > Setting:V8
Products > IP phones > Snom3x0 > Setting:snom3x0
Products > IP phones > Snom8xx > Setting:snom8xx
Products > SIP conference phone > Snom MeetingPoint > Setting:snom MP
Products > SIP paging > Snom PA1 > Setting:snom PA1
