Settings/admin mode password

From Snom User Wiki

Jump to: navigation, search
WEB USER INTERFACE
V6: Advanced - Security (Section): Administrator Password
V7: Advanced - QoS/Security (Tab) - Security(Section):Administrator Password
V8: Advanced - QoS/Security (Tab) - Security(Section):Administrator Password
PHONE USER INTERFACE
V7
Snom300: Navigation Key Down - Configuration
Snom320: Navigation Key right or press "Settings" - Configuration
FIRMWARE VERSIONS
V6  V7  V8  
XML CONFIGURATION
<admin_mode_password perm="PERMISSIONFLAG">VALIDVALUE</admin_mode_password>
DESCRIPTION
This setting is accessible when the phone is running in administrator (admin) mode. The default administrator password (admin PW) is “0000”. When the phone is running in user mode (i.e., many settings are not available), you need the admin PW to switch the phone to admin mode. This setting requires confirmation (see Settings/admin_mode_password_confirm).
Note:
We recommend that you replace the default admin PW by an individual one; if you do not, an unauthorized third party with access to the phone could set an admin PW unknown to you. In such a case, you would no longer be able to switch from user mode to administrator mode.
If you set your own admin PW, be sure to write it down and store it in a secure place. If you lose your admin PW, you will not be able to return the phone to admin mode without a factory reset of all values.
VALIDVALUE
  1. Numbers of unspecified length, e.g. <1234>
  2. character strings of unspecified length, e.g. <nhcndeve>
  3. Special characters of unspecified length: ".","+","@",":",",","?","!","-","_","/","(",")",";","&","$","*","#","<",">","[","]","="
  4. mixture of 1), 2), 3) of unspecified length
DEFAULTVALUE
0000
FURTHER INFORMATION
Secure PUI
Personal tools
Interoperability