Settings/active line
From Snom User Wiki
< Settings
- WEB USER INTERFACE
- V6: Active Outgoing Identity
- V7: Active Outgoing Identity
- V8: Active Outgoing Identity
- PHONE USER INTERFACE
- N/A
- FIRMWARE VERSIONS
- V6 V7 V8
- XML CONFIGURATION
- <active_line perm="PERMISSIONFLAG">VALIDVALUE</active_line>
- DESCRIPTION
- Number of the active SIP identity. This is the identity which is used as the originator of an outgoing call.
- VALIDVALUE
- Between <1> and either <4>, <7> or <12> depending on the supported number of identities per phone type.
- DEFAULTVALUE
- 1
- FURTHER INFORMATION
- SIP
Categories: Setting:V6 | Setting:V7 | Setting:V8 | Setting:snom3x0 | Setting:snom8xx | Setting:snom MP | Setting:SIP | Setting:snom PA1
Products > Features
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting
Products > Firmware > Setting > Setting:SIP
Products > Firmware > V6 > Setting:V6
Products > Firmware > V7 > Setting:V7
Products > Firmware > V8 > Setting:V8
Products > IP phones > Snom3x0 > Setting:snom3x0
Products > IP phones > Snom8xx > Setting:snom8xx
Products > Network > SIP
Products > SIP conference phone > Snom MeetingPoint > Setting:snom MP
Products > SIP paging > Snom PA1 > Setting:snom PA1