M-series/Firmware/Release Notes

From Snom User Wiki

Jump to: navigation, search

Contents

Base and Handsets

Upgrading to version 400BXX from version 324BXX or earlier:

  • IMPORTANT NOTE 1: Direct upgrading from version 324BXX to 400BXX is not possible, you have to update first to the version 355B25 and then to the version 400 to facilitate customers in this task we prepared an auto-update script at this address: http://dect.snom.com/324-to-400/auto-update.php , please follow the reported instructions.
  • IMPORTANT NOTE 2: Rollback to version 355BXX or 380BXX is possible from version 400BXX

Upgrading to version 355BXX from version 324BXX or earlier:

  • IMPORTANT NOTE 1: After upgrading to the version 355BXX you WILL NOT ABLE TO DOWNGRADE TO THE VERSION 324BXX. Please take this upgrade carefully
  • IMPORTANT NOTE 2: The upgrade will remove all the manually uploaded contacts from the global addressbook. Please make sure to re-upload the addressbook after the update.
  • IMPORTANT NOTE 3: In case you are doing the update from a 323 version you need to update to the version 324B12 before applying the version 355

Version VSV410B4 HSV410B3 - March 2018

Bugfixes:

  • DECT-486: Using SRTP can cause DECT base crash
  • DECT-477: Configuring the VLAN priority breaks the multicell communication
  • DECT-484: Missing REFER in transfer scenario
  • None: The handset stores only a few text Messages
  • None: The handset shows only the name name, doesn't show the number of caller/callee

Version BSV410B1 HSV410B2 - March 2018 Release Candidate 2

New Features:

  • DECT-487: SIP Username can be used in LDAP configuration using the %SIP_NAME% placeholder

Bugfixes:

  • DECT-465: DHCP Option 57 is sent with a wrong value
  • DECT-411: Unable to register an handset with ID 255

Known Issues:

  • DECT-486: Using SRTP can cause DECT base crash
  • DECT-477: Configuring the VLAN priority breaks the multicell communication Workaround: configure the VLAN priority to 0

Version BSV400B4 - January 2018 - Release Candidate 1 - DECT base only

This firmware version applies to the M300 and M700 bases only, the handsets should stay on the 400B02 version.

Bugfixes:

  • DECT-474: Phone does not sent the manufacturer TLS certificate during provisioning request
  • DECT-475: M65 with hardware revision RC50 cannot be paired with the DECT base
  • DECT-471: New setting eth_driver_initialize performing a reset of the ethernet driver every 40s without receiving data. The setting is off by default. After a firmware upgrade from a version <400B4 this setting needs to be provisioned in order to have it disabled.

Known Issues:

  • DECT-486: Using SRTP can cause DECT base crash
  • DECT-477: Configuring the VLAN priority breaks the multicell communication Workaround: configure the VLAN priority to 0

Version BSV400B2 HSV400B2 - November 2017

Bugfixes:

  • FIX: DECT-462: Using the char ' in account details is not possible from web interface
  • FIX: DECT-436: Central Directory button disappears from the handset in multicell with Local Directory
  • FIX: None: Missed calls was not reported on the handset
  • FIX: DECT-463: Uploading Central Directory in a wrong format breaks the feature
  • FIX: DECT-276: a=crypto SDP line with tag 0 was used

Known Issues

  • DECT-474: Phone does not sent the manufacturer TLS certificate during provisioning request do not upgrade to the 400B02 if you are using client certificate authentication
  • DECT-475: M65 with hardware revision RC50 cannot be paired with the DECT base do not upgrade to the 400B02 if you are using M65 handsets with hw rev. RC50
  • DECT-477: Configuring the VLAN priority breaks the multicell communication Workaround: configure the VLAN priority to 0

Version BSV400B1 HSV400B1 - October 2017 (not released)

Bugfixes:

  • FIX: DECT-454: M700 connection issues while TLS / SRTP in use
  • FIX: DECT-449: Base crash handling some SIP messages
  • FIX: DECT-376: Handset addressbook upload failure
  • FIX: DECT-358: Make the remote ringtone support disable via provisioning
  • FIX: DECT-359: Support for provisioning values for Number of base stations/Repeaters
  • FIX: None: M300: Base hang suddenly during G729 call
  • FIX: None: M65 and M85 cannot place a call in some situations (Call Outgoing Rejected (Cause#503) )
  • FIX: None: M300: No SIP reg. after Ethernet disconnect/connect
  • FIX: None: Local Phonebook: Alphabetical sorting / searching not avail
  • FIX: None: M700: Statistics counters in single cell are all zero
  • FIX: None: Handling of Russian characters sorting in phonebook improved

Version BSV380B12 HSV380B12 - September 2017 (not released)

Bugfixes:

  • FIX: None: SIP via UDP: Use Different SIP Ports was not working
  • FIX: None: M85 can only confirm last 10 alarms
  • FIX: None: M25 in some occasion cannot call

Version BSV380B10 HSV380B10 - September 2017 (not released)

Bugfixes:

  • FIX: None: M700 improved DECT tree calculations
  • FIX: DECT-416: Erroneous Insufficient Resources error on M700
  • FIX: DECT-362: M700 single cell mode: Max concurrent calls is 8 instead of 10 after enabling and disabling SRTP auth.

Version BSV380B9 HSV380B9 - August 2017 (not released)

Bugfixes:

  • FIX: None: Calls are not possible after several ethernet disconnect/connect
  • FIX: None: Call forward No answer and Busy MMI not working on M25

Version BSV380B5 HSV380B5 - May 2017 (not released)

New Features:

  • NEW: DECT-270: SSL Certificate chain support

Bugfixes:

  • FIX: DECT-347: Route header not correctly reported
  • FIX: DECT-362: M700 single cell mode: only 8 concurrent calls after enabling SRTP auth.
  • FIX: DECT-393: Syslog port is not exported nor provisionable
  • FIX: DECT-374: Importing Local Phonebook needs to delete contacts in handsets prior to import
  • Fix: None: Channel leak issue with g729 (M300 only)
  • FIX: None: Improved firmware update stability

Version BSV355B25 HSV355B25 - May 2017

New Features:

  • NEW: DECT-408: Messaging not implemented for Snom Provisioning
  • NEW: Support for M85 accelerometer and pull cord (requiring M85 HW-revision)

Bugfixes:

  • FIX: None: Sporadic handset reboot, the Call Forward show "off"
  • FIX: None: Base reboot during IP renew
  • FIX: None: Base resource leak leading to some bad audio issues
  • FIX: None: Sporadic delays during the handover leading to temporary bad audio issues

Version BSV355B24 HSV355B24 - February 2017 (not released)

Bugfixes:

  • FIX: DECT-373: Provisioning with IPEI and without HS-specific AC the device doesn't use the General AC
  • FIX: DECT-227: Support for multiline SIP header (Proxy-Authorization)
  • FIX: None: Restarting HS after attended call transfer

Version BSV355B23 HSV355B23 - December 2016 (not released)

Bugfixes:

  • FIX: DECT-382: M300: G729: One way RTP after double hold-unhold
  • FIX: DECT-381: M300: DECT channels leak with hold/unhold using g729
  • FIX: DECT-361: Usage of comma in setting values breaks the device configuration
  • FIX: DECT-338: "Frying" audio effect using G729 on M700

Version BSV355B22 HSV355B22 - October 2016

Bugfixes:

  • FIX: None: Tbook address book provisioning deadlock
  • FIX: DECT-377: Page buffer error log flood
  • FIX: None: Configuration push System Data

Version BSV355B21 HSV355B21 - August 2016

Bugfixes:

  • FIX: DECT-360: Provisioning - M700/M300 does not fetch any structured setting files (using the settings-files XML tag)
  • FIX: DECT-347: Route header not correctly reported in case of multiple Record-Route into the request
  • FIX: DECT-340: LDAP not working in some scenarios

New features:

  • Is possible to register up to 10 Konftel 300Wx devices to the M700

Version BSV355B19 HSV355B19 (Release Candidate) - June 2016

Bugfixes:

  • FIX: DECT-345: Wrong provisioning requests if setting filename doesn't contain the file extension
  • FIX: NONE: M65: Fixed some call drop and handset reboot during a call

Known issues:

  • DECT-360: Provisioning - Device does not fetch any structured setting files (using the settings-files XML tag)

Version BSV355B16 HSV355B16 (BETA) - May 2016

Bugfixes:

  • FIX: DECT-336: NAT Adaption feature working only for outgoing requests
  • FIX: DECT-332: Call pickup via replaces headers
  • FIX: DECT-330: Not resolved .local domain in provisioning server
  • FIX: DECT-323: Base Crash On Alternative STUN Server Port
  • FIX: DECT-311: Audio gaps when the base receives CN packets
  • FIX: DECT-264: Provisioning - Placeholder for MAC not correctly used
  • FIX: DECT-256: STUN settings are only applied to sdp and not to sip contact header
  • FIX: DECT-245: Provisioning isn't coherent with Desktop Snom phones: removed the snomM300 / snomM700 folder name from the requested path
  • FIX: DECT-244: Media-level connection information is ignored
  • FIX: DECT-234: No audio when call wating tone is played
  • FIX: DECT-300: M300 - Provisioning Server via Setting not correctly fetched/used
  • FIX: DECT-307: The setting "Always reboot on check-sync" can't not be changed via xml provisioning
  • FIX: DECT-297: SIP password length is limited to 35 chars, now is 60 chars
  • FIX: DECT-293: DST don't switch to winter time when dst_by_country_region = on
  • FIX: DECT-252: No Busy tone played after receiving "486 Busy"
  • FIX: DECT-240: Unable to manage LDAP VLV via provisioning: new setting introduced: ldap_virtual_lists
  • FIX: DECT-230: M85: Wrong LED color naming in handset UI
  • FIX: DECT-226: HTTP client credentials cannot be provisioned
  • FIX: DECT-223: No audio after call-pickup with Replaces header
  • FIX: DECT-202: Wrong handling of UTF-8 chars in addressbook
  • FIX: DECT-213: M65 Display Call Forwarding Status and Target on Screen When Enabled

New features:

  • Possibility to load and export the handset addressbook (via web interface only)
  • Enable / Disable the Remote ringtone support via Alert-Info (Remote Ring Tone Control)
  • Multicell: Up to 1000 handset can be registered to a system
  • Multicell: 49 or 126 or 253 slave bases can be registered to the master (depending on the number of repeaters)
  • Text messaging feature enabled on the M65 and M85 (handset master reset needed)

Known issues:

  • DECT-345: If provisioning URL doesn't contain the file extension the device sends a wrong provisioning request
    • NOTE: This issue can cause problems with 3CX provisioning

Version BSV324B12 HSV324B9

  1. FIX: NONE: Minor web GUI issues
  2. FIX: DECT-242: (M700 Only) Multicell unstable after firmware upgrade under particular circumstances
  3. FIX: DECT-231: Check-sync requests are not queued and distributed to the chain
  4. FIX: DECT-236: Support for DHCP option 132 for VLAN assignment
  5. FIX: DECT-235: DECT-Pairing doesn't work after a new base station is in the system
  6. FIX: DECT-232: Handset loses SIP Registration while roaming
  7. FIX: NONE: Phonebook/Directory doesn't get reloaded when Check-sync is received
  8. FIX: DECT-246: Base restart after STUN server configuration
  9. FIX: DECT-208: SIP over TCP support doesn't work under certain circumstances
  10. FIX: DECT-229: NTP stability improvements

Version BSV324B7 HSV324B7

  1. 84527 anonymous LDAP issue – TCP connection is not released
  2. 81947 Snom - (DECT-224) Redirect server scenario doesn't works
  3. 83180 Beatus: Snom FWU provisioning doesn't work.
  4. 77964 snom - (DECT-212) - ringtones to HS firmware V324
  5. 76203 snom - (DECT-210) - firmware update using virtual host is not correctly handled
  6. 77477 Snom - (DECT-207) - Broadsoft: wrong origin SDP line (o=) if to headset contains a tel URI
  7. 76908 Snom - (DECT-206) Visual Issues
  8. 74913 (74944) Snom – (DECT – 198) Local addressbook does not work when base is in snom mode
  9. 76150 Snom - (DECT-196) Issues when setting_server is provisioned
  10. 76147 Snom - (DECT-195) Support for different ports in firmware and setting path
  11. 76909 Snom - Change Edit menu für contact etc
  12. 76661 Snom - HTTP firmware using a custom port
  13. 70303 SNOM - New web logo
  14. 70448 SNOM - new web logo part 2
  15. 75229 Snom - provisioning parameter details
  16. 70052 Snom - SRTP disabled by default
  17. 74252 Snom - support for redundant server
  18. 76204 snom - firmware update using virtual host is not correctly handled
  19. 76041 Snom - updated M25 and M65 icons
  20. 76070 Snom: HTTP Management upload script" is limited to 32 digits
  21. 74971 Snom: LDAP searchrequest include ldap controls that lead to errors with openldap
  22. 76144 [Snom][Open LDAP]BS reboot when search multiple contacts of open LDAP Central Directory
  23. 76031 Beatus: ß or ü not handled in extension line name if last char


Version BSV323B11 HSV323B11

  1. 71593 (73750) Incoming calls with two or more m lines are not answered correctly
  2. 71375 (71377) LDAP contacts with numbers that contain white spaces are translated into semicolon
  3. 74520 (74528) Updated snom logo in boot up screen
  4. 70317 (74524) Firmware path is limited to 32 characters. Increase to 128 characters.
  5. 74843 (74844) Snom - M65 add ringer off menu similar to M25 and remove “volume off” option from ringer volume setting
  6. 74886 SNOM - Favicon for M700 & M30071593
  7. 74903 SNOM - remove second SNOM on web page top "snom SNOM MX00"
  8. 75172 Web Server -> configuration: export/import in snom xml format
  9. 74742 Server sorting does not correct
  10. Provisioning patch "setting_server" shall be 128 characters (same as firmware path)


Repeater (M5)

Version 39

  1. IMPORTANT: To upgrade from V33B3 to V39 repeater re-registration is needed
  2. Support for repeater statistics
  3. Repeater syslog status improved
  4. Improved busy handling
Personal tools
Interoperability