Interoperability/PBX/CiscoCallManager

From Snom User Wiki

Jump to: navigation, search

Contents

Cisco CallManager (CCM)

Version 5.0 of Cisco CallManager supports SIP end-points for the first time.


Configure Snom Phone Indentity

Enter the IP address of CCM in the "Registrar" and "Outbound Proxy" field. Choose a phone number and use that number for "Authentication Username".

Image:Cisco_PBX_-_Snom_Phone_Indentity.png

Add New End User

CCM→User Management→End User→Add New

Image:Cisco_PBX_-_End_User_Config.png

Add Third-Party SIP Phone and DN

CCM→Device→Phone→Add New and select "Third-Party SIP phone". Fill out all required fields. Additionally, enter the phone/user number in the "Digest User" field.

Image:Cisco_PBX_-_SIP_Phone_Config.png

After "Save" select "Line [1]" and enter the Directory Number ("400" in our case).

Image:Cisco_PBX_-_Add_Directory_Number.png

Image:Cisco_PBX_-_Status_Directory_Number.png

Check Registration Status

Finally reboot the snom phone and check the status CCM→Device→Phone→Find

Image:Cisco_PBX_-_Registration_Status.png

Personal tools
Interoperability