8.7.3.25 New Features
- NETWORK
- SCPP-5130: WLAN - Support for 802.11N
- WUI
- SCPP-5131:Block/Allow dialing from WUI or via HTTP requests based on new setting dial_from_wui
- HEADSET
- SCPP-5138: USB HID thread integration to avoid blocking of phone software
8.7.3.23 New Features
- PUI
- SCPP-4905: Hot Desking - Identities have a new setting user_no_auto_logoff which defines that the identity is not deleted during Logoff all. This can be used e.g. for emergency lines.
8.7.3.22 New Features
- AUDIO
- SCPP-3224: Implementation of dtmf_volume setting for all phone types
- SCPP-2338: new setting dtmf_handset_phone to disable DTMF tones during call initiation in handset mode
- XML BROWSER
- SCPP-4978: Broadsoft/BLF/Call Park Indicator/Call Park Pickup in Buddy List XML Definition
- XML Buddy key now also signals a parked buddy and allows to retrieve it
8.7.3.19 New Features
- AUDIO
- SCPP-3988: exclusive early-media / local ringback playback
- SCPP-4491: new setting to define which numbers will cause a secondary dial tone: secondary_dialtone_when
- SCPP-15: if a headset is used, ringing tone should be audible both on headset AND speaker (optional)
- Added entry Use Headset and Speaker to pull down menu so there now are three available options:
- Use Headset
- Use Speaker
- Use Headset and Speaker
- PUI
- SCPP-4488: Add new language LT (Lithuanian)
- SCPP-4462: implementation of contact_source_priority
- SCPP-4390: New field Action URL added to the internal address book.
- The field defines a URL that is fetched on in/outgoing calls for that contact and should return an XML.
- It is possible now to connect a video camera (e.g. door phone) and automatically fetches the XML and therefore show the mjpeg stream when e.g. the door phone calls the reception. The XML/mjpeg is also fetched for outgoing call, so it is possible to call a surveillance camera or the door phone. But the contact with the URL must be stored in the internal address book.
- NETWORK
- SCPP-4396: New time zone Lithuania added
8.7.3.15 New Features
- PROVISIONING
- SCPP-4392: When using PnP the phone should be able to process NOTIFYs at every time (currently limited to 5 seconds after the SUBSCRIBE has been sent)
- SCPP-3064: SIP MESSAGE can be used to send settings to the phone
- PUI
- SCPP-4314: Improved function key type handling
- SCPP-3874: Implemented joined call screens for 710/720
- SCPP-4215: Call-screen view can be configured whether the incoming or the active call has priority using always_show_active_call setting. Screen shows the prioritized call.
- SCPP-4103: added setting offhook_accept_calls to disable answering a call on off hook
- SCPP-4235: New identity-based setting remote_contact_header_field to control whether "From" header URI or "Contact" header URI are stored in the call list
- SCPP-4182: It is now possible to click on the details button when having the missed-message selected in status Message view. The phone will then show all missed calls
- SIP
- SCPP-4326: Add support for server based DND for Metaswitch
- XML
- SCPP-4097: add a dtmf-action to the action tag list.
- NETWORK
- SCPP-3990: IPV4 conflict detection should be VLAN aware
- AUDIO
- SCPP-3926: Implement headset usage with serial EHS box for snom 710
- SETTINGS
- SCPP-4172: added values "snomONE" and "SUTUS BC" for user_server_type
8.7.3.10 New Features
- AUDIO
- SCPP-3719: Implement music on hold, which should be send from the phone itself
- WUI
- SCPP-3737: Long key press via web interface (Enhancement of command.htm?key=... according to the following syntax command.htm?key=<key>[,<long_press_timeout_ms[,pause_after_key_ms]];...)
- SCPP-3745: Provide state of identities and lines in web interface (http://[Phone IP]/state_of_identity.htm)
- SCPP-3755: Provide LED status information in web interface
- New section LEDS is appended to the end of the state_of_gui.htm page. The first row shows the title of the fields (number, frequency, and colour). Fields are separated by a blank.
- SCPP-3758: Force idle state in web interface
- SCPP-3763: Swedish language files updated
- SCPP-3977: screen.bmp and alike should only be accessible in admin mode
- PUI
- SCPP-3843: Reintroduce menu option to configure fkeys using phone PUI
- SCPP-3302: Scrolling of long display names
- SCPP-3321: Allow all XML defined buttons to display a custom label - springboard icons may define color and positioning/size of the label
- SCPP-3900: Phone Menu shows basic identity functionality in user mode (Menu - Identity)
- NONE: New 370 splash images
- SETTINGS
- SCPP-3856: change obsolete setting values (e.g. F_R) on the fly, so customers don't need to fix their provisioning
- SCPP-3162: Remove Identity - Remove also all Identity related settings
- NONE: improve settings store log
- XML BROWSER
- SCPP-1492: Minibrowser: new XML tag for DTMF requested
- NETWORK
- SCPP-2862: IP address conflict check on DHCP an static IP
- HEADSET
- SCPP-2968: Act on USB Soundcard keyevents
- SCPP-3842: Implementation of GN Netcom USB Headsets Specs
- SCPP-3808: Implement headset usage with serial ehs box for 720/760
- NONE: logs for serial headset commands
- PROVISIONING
- SCPP-3991: Option to have in redirect http-URLs again just filenames, instead of complete URLs
- SCPP-3801: If the update policy is set to 'ask_for_update', a status message should be shown instead of terminating LCS and let LID ask the question
- SCPP-2704: phone should not ignore HTTP 302 response instead make a new request to the provided location
- NETWORK
- SCPP-3990: IPv4 conflict detection should be VLAN aware
- UC
- SCPP-3786: Device Updates via Lync Update Service
- SIP
- NONE: New Log message for creation and deletion of a subscription
8.7.3.7 New Features
- PUI
- NONE: ADD - new setting mute_is_dnd_in_idle
8.7.3.6 New Features
- CERTIFICATES
- SCPP-3270: ADD - Entrust Root CA certificate
8.7.3.5 New Features
n/a
8.7.3.4 New Features
- SIP
- SCPP-2201: ADD - AOC Indication in 183 Response.
8.7.3.3 New Features
- NETWORK
- SCPP-2871: ADD - Advanced timeout handling in webclient. Added a new class which is handling 'back off timer' values.
8.7.3.2 New Features
- SIP
- SCPP-3241: ADD - Broadsoft - Several Content-Types/Events not supported. Feature added for call center call information. Minor improvement, remove tailing comma
8.7.3.1 New Features
- PUI
- SCPP-3030: Mute button in idle screen toggles DND (snom 300 only)
- SCPP-2807: When the phone is rejected by the OCI server it needs to ask the user for the credential (user, password) using the PUI.
- SCPP-2939: support for describing key-behaviour in XML for idle-navi-, idle-context- and hard-keys (menu and alike)
- SCPP-2997: Broadsoft XSI-ACD Agent implementation
- SCPP-3324: New setting requested to restore old speaker key behaviour: speaker_toggles_device
- SCPP-726: OCS/Lync: Port for 370, 870, MP: Inform user about special routing events (fowarding, delegation, team call, acd, private line, cccp conferencing) during ongoing call
- SCPP-3062: new setting controlling which canceled incoming rings don't make it into the missed-call-list: sip_cancel_reasons_to_ignore_missed_call
- SCPP-3208: Added QSC Broadsoft ResourceList Keys
- NONE: Saving new tbook entry out of call list details is taking name from contact pool if available
- WUI
- SCPP-2775: ADD - Add czech tone scheme to web UI drop down
- XML
- SCPP-3208: QSC Broadsoft ResourceList Keys - In XML-descriptions all applicable actions get fired now, not just the first one - accept though for dial-actions since phone can only dial one party at a time.
- ACTION URL
- SCPP-3157: new setting replace_header_fire_action_url if true action urls will be fired during transfer with replace headers.
- CERTIFICATES
- SCPP-3270: Entrust Root CA certificate added
- DHCP
- NONE: Fill DHCP option 12 (hostname) with 'snom_XXXXXX'.
- SCPP-2773: Exchange Device Information via DHCP INFORM with the Gateway even if DHCP is not used for IP address allocation, two new settings: dhcp_options_on_ip_aquire and dhcp_options_on_inform
- XML BROWSER
- NONE: Minibrowser is now capable of handling elif and else tags.
- PROVISIONING
- SCPP-2808: Phone should always prefer redirection server over DHCP option 66/67. Added new setting provisioning_order which can change order of provisioning types
- SIP
- SCPP-3064: SIP MESSAGE can be used to send settings to the phone
- AUDIO
- SCPP-3122: Added setting headset_rings_once (in Advanced/Audio) to disable default repeated ringing for headsets.
- URI
- SCPP-3407: URi Utils should replace all occurrences of tokens in URIs.
8.7.2 New Features
- CERTIFICATES
- (8.7.2.9) SCPP-2971: ADD - Entrust Root CA certificate
- AUDIO
- (8.7.2.7) SCPP-2360: ADD - (snom720, snom760) Missing GSM Codec
- (8.7.2.4) UPD - (snom720, snom760) Audio profiles have been improved.
- UC
- (8.7.2.5) SCPP-726: ADD - Microsoft OCS/Microsoft Lync: Inform user about special routing events (fowarding, delegation, team call, acd, private line, cccp conferencing) during ongoing call.
- (8.7.2.5) SCPP-2438: ADD - Microsoft Lync: Inbound private lines.
- (8.7.2.5) SCPP-2605: ADD - Microsoft Lync: Place g722 on top position of default codec list.
- (8.7.2.0) SCPP-2411: ADD - Microsoft Lync - CFWD support with new publishing behavior.
- (8.7.2.0) SCPP-2435: ADD - Microsoft Lync - Call admission control and bandwith management
- (8.7.2.0) SCPP-2436: ADD - Microsoft Lync - Media Bypass
- (8.7.2.0) SCPP-2437: ADD - Microsoft Lync - Monitoring and Device Inventory Reporting
- (8.7.2.0) SCPP-2632: ADD - Microsoft Lync - E.911 - support of ms-subnet header in REGISTER and subnet info in roaming provisioning SUBCRIBE.
- (8.7.2.0) SCPP-2634: ADD - Microsoft Lync - E.911 - disable of current Call Forwarding rules in Emergency Calls and revert automatically after 120 minutes.
- (8.7.2.0) SCPP-2694: ADD - Microsoft Lync - Support for Set user presence.
- PUI
- (8.7.2.5) SCPP-3255: ADD - New setting keyboard_lock_accepted_callkeys to accept additional keys during keyboard lock.
- (8.7.2.1) SCPP-1034: ADD - Show resolved names even in Call Lists.
- (8.7.2.0) ADD - (snom300, snom320) Phone now uses joined-call-screen-techniques (SCPP-2590).
- (8.7.2.0) SCPP-1781: ADD - Presence-buttons now work as transfer-target as well.
- (8.7.2.0) SCPP-2566: ADD - Introducing new setting recording_mechanism to control what happens, when record key is pressed.
- (8.7.2.0) SCPP-2590: ADD - (snom820,snom821) Softkeys in call-screen controlable via settings call_screen_fkeys_on_outgoing, call_screen_fkeys_on_incoming, call_screen_fkeys_on_connected and call_screen_fkeys_on_holding
- (8.7.2.0) SCPP-2590: ADD - (snom820,snom821) Text format in line-info layer is now configurable, see new settings (provisioning only): lil_first_line_format, lil_second_line_format, lil_state_format, lil_1st_line_height and lil_2nd_line_height.
- FKEY
- (8.7.2.0) SCPP-2879: ADD - New option to distinguish dialing from call-pickup added to fkey XML subscribe specification.
- (8.7.2.0) SCPP-2892: ADD - New option to add routing info added to fkey XML subscribe specification (subscription doesn’t need to use outbound-proxy from identity).
- IP
- (8.7.2.0) SCPP-2862: ADD - IPv4 conflict detection during bootup and defending during runtime (RFC 5227).
- SETTINGS
- (8.7.2.0) SCPP-2139: ADD - New setting disable_storing_changes to disable writing setting and local Directory changes to flash memory.
- (8.7.2.0) SCPP-2720: ADD - New setting show_connected_call_in_monitor_view.
- SIP
- (8.7.2.0) SCPP-2922: ADD - Enable extension monitoring groups.
- (8.7.2.0) SCPP-3072: ADD - New setting sip_stop_subscriptions_on_register_failure to stop subscriptions on registration failure.
- (8.7.2.0) ADD - Sending DND on/off starcodes for server-managed DND as well.
- WUI
- (8.7.2.0) SCPP-3099: ADD - Make setting restrict_uri_queries configurable via WUI.
|
8.7.3.25 Bugfixes
- AUDIO
- SCPP-5115: Ringtone disappears in certain situations
- SCPP-5105: Phone input via keypad, handset or line key sometimes is blocked for incoming calls
- SCPP-4984: Call Deflection - Dialtone is played out when deflecting a call
- SCPP-5176: After SSRC change no audio for few seconds
- SIP
- SCPP-5147: No DTMF outband events are send using the snom conference server
- SCPP-4906: disabled m= lines in SDP offer must also appear in SDP answer
- PUI
- SCPP-5142: Local address book matching does not work any longer for direct IP calls
- SCPP-5104: Changes to user_ringer parameter via phone menu not being saved
- SCPP-5159: phone doesn't show LDAP lookup result on incoming call (snom 370/870 only)
- HEADSET
- SCPP-5097: Endless toggling between Headset and Speaker on Plantronics Wireless SAVI W745/A
- UPDATE
- SCPP-4809: When firmware update fails the phone does not restart automatically (snom 300 only)
- WUI
- SCPP-5043: Replacement of Action URL Variables adds "equal" sign on query parameter without value
8.7.3.23 Bugfixes
- NETWORK
- SCPP-5074: phone forgets VLAN setting if downgrade to firmware version with old VLAN setting format
- SCPP-5055: LLDP - device adverts only Half Duplex if AutoNegotation not enabled (Operational MAU Type)
- SCPP-4882: VLAN - Prio not working if TOS is set up
- SCPP-2254: TOS Out-Of-Range and no Reboot indication
- PUI
- SCPP-5071: BLF/Call Pickup: Wrong LED Behaviour (Ringing, BLF Key instead Line Key)
- AUDIO
- SCPP-5081: missing audio at the beginning of IVR announces (circa one second)
- SCPP-5064: Sometimes 821/870 phones are playing disturbing noise on speaker in idle state
- SCPP-5017: enabled auto_dial causes constant signaling of busy tone.
- HEADSET
- SCPP-5090: No Audio on Outgoing Calls with Wireless Jabra and Plantronics headsets on snom 7xx
- SCPP-5065: snom 760 crashes with Plantronics headsets Wireless SAVI W745/A and Wireless CS540A
- SIP
- SCPP-5053: phone duplicates not supported media type (video) on Re-Invite (Session Timeout)
- SCPP-5029: Incorrect REFER causes server based conference to fail with 3CX
- SCPP-4902: Invite responded too incorrectly before the ack of 180 ringing that included 100rel
- SCPP-4995: Incorrect response to identity-request with blank credentials
- PROVISIONING
- SCPP-5070: Provisioning sometimes does not work when the network uses STP and static IPs for the phones
- SCPP-5042: Parammap for all phone types needs to be updated
8.7.3.22 Bugfixes
- NETWORK
- SCPP-4859: snom 710 doesn't forward EAP packets to the PC port
- SCPP-4811: Enabling Wifi Ethernet Bridge leads to phone being stuck in sending DHCP requests
- SCPP-4808: PA1 identifies itself as Snom300 (Vendor Class Identifier)
- SCPP-4804: Lease renewal, phone does not reboot if NACK from server
- SCPP-4517: phone loses packets during internal switch reset
- SCPP-3476: %23(encoding for #) in csta:calledDirectoryNumber is ignored in outgoing SIP-INVITE if csta_legacy_control = 0
- PUI
- SCPP-4987: Call Deflection - Current Call is put on HOLD instead of 2-way-audio while deflecting the other call
- SCPP-4881: dkey_fkey doesn't work for URL action
- SCPP-4878: BLF Call Pickup - Group Call Pickup via Call Monitor does not work
- SCPP-2026: Expansion Module/BLF makes phone delay or become unresponsive or slow
- SCPP-4877: Conference with 4 participants leads to crash
- SCPP-4950: Conference soft key should not auto hide when conferencing setting is not empty
- SCPP-4964: Several actions are always applied to connected call instead of waiting call even if waiting call is selected in joined call screen
- SCPP-4592: Displayed wrong Caller ID number after a remote party update during an active dialogue
- SCPP-4605: Unable to initiate attended transfer if multiple identities are involved
- SCPP-4710: snom320: LCD Display freeze after provisioning failed (via timeout)
- SCPP-4640: speed dial keys should use the fail over identity when the context is configured as active identity
- SCPP-4132: Hebrew text on line info layer displayed backwards
- SCPP-4575: goto_monitor_state_on_line_activity not working as expected in ring group scenario
- SCPP-4739: scroll bar does not highlight the selected ring tone in phone menu
- SCPP-4751: Status Info screen will not be displayed if key is overwritten with dkey_fkey4
- SCPP-4555: Pressing the speaker key (short press) changes mode from Headset to None every two times, must do it every time
- SCPP-4762: editing internal directory entries via PUI not possible
- SCPP-4764: Unkown is shown instead of caller ID on incoming call after hold
- SCPP-4783: Edit number before call feature is broken
- SCPP-4794: Really slow responsiveness of the phone after having done several calls
- SCPP-4840: Cannot open details of missed call in Status Information by pressing OK
- SCPP-4829: phones freeze in edit mode during press of CANCEL
- SCPP-5019: Broadsoft/AOC - phone shows AOC Screen after call even when not activated
- SCPP-4728: Dialling out of detail view in caller lists not working
- WUI
- SCPP-4875: Switching account details for an Identity that first didn't have an outbound proxy to one that does will fail to send the de-register to the right IP address
- SCPP-4980: Export and Import of CSV address book is broken
- SCPP-4656: display_method = display_number_name has no effect on caller lists on the Web interface
- SCPP-4641: Spelling mistake in download parameter mapping in WUI
- SCPP-4631: Line-Info Layer More Controls are changed when behaviour settings are changed
- SCPP-4552: @IP for "Extension Monitoring Call Pickup List URI" is not added automatically in the SUBSCRIBE packet as it was in the past
- SCPP-4734: P-Asserted-Identify information are not being removed from contact.htm
- SCPP-4742: user mode not applied after change from admin to user and cold restart of the phone
- SCPP-4569: changing the <dkey_settings> is not possible, other dkeys_x work correctly, also key_settings_remapped=none doesn't have an effect
- SCPP-4572: Spamming message in log: PHN: SIP: packet 1037204 dest invalid udp:10.123.248.66:5060 for Request DISCOVER/-
- SCPP-4606: 7xx-series does not support 60ms packets but settings is present
- AUDIO
- SCPP-4984: Call Deflection - Dial tone is played out when deflecting a call
- SCPP-4920: MWI Indication beeps strange in idle
- SCPP-4813: snom 710: The first DTMF tone is missing during hold when using speaker
- SCPP-4724: One way audio with g729 codec after selecting one conference participant, pressing OK and then resuming the conference
- SCPP-4711: Muted connected call gets unmuted when another incoming call stops ringing
- SCPP-4653: If DTMF keys are pressed very fast in a call, the remote phone sometimes didn't recognize the outband DTMF events correct
- SCPP-4628: during number entry phone plays DTMF tones sporadically
- SCPP-4619: phone stops receiving multicast after receiving an incoming call via handset
- SCPP-4610: Multicast paging receive delays audio ca. 3 seconds when changing audio device
- SCPP-2089: DTMF - SIP only activated, RTP event still being sent (snom 821/870 only)
- SCPP-3863: Incoming Call while automatic redial on busy results in ringing tone restart every second
- SCPP-3531: Broadsoft/Call Center/Hold Reminder - Speaker is not Ringer Device for second incoming call
- SCPP-4910: G729ab is not working on 3xx, 820, 710
- HEADSET
- SCPP-4966: mix mute on 720/760 doesn't work properly with USB Plantronics Blackwire C620
- SCPP-4962: Ringtone (short beeps) for incoming call cannot be heard on Wireless Jabra PRO 920, EMEA
- SCPP-4958: Wireless Jabra PRO 9470 can accept incoming calls only by pressing the headset button twice
- SCPP-4688: Wireless headset Wireless Jabra PRO 920, EMEA doesn't work properly
- SCPP-4586: DHSG mode at GN9330 results in delayed audio connection to opposite
- SCPP-4181: Wireless headset doesn't work properly, audio is played via handset instead of headset and call is disconnected just press the headset button twice
- SIP
- SCPP-4947: RTP - SSRC / Sequence Number not correct
- SCPP-4893: Hold fails because of different DTMF paylod types 101<->96
- SCPP-4712: phone sends 711u codec on blind transfer to IMS mobile
- SCPP-4622: Typo in RTP Payload Format for AMR Wideband codec. Hyphen was missing, it shows "amrwb" instead of "amr-wb" as specified in RFC3267
- SCPP-4944: phone does not send INVITE with authentication after Failover
- SCPP-4873: 302 Moved Temporarily during call
- SCPP-4931: "Unauthorized" for REFER will not be resend if user_moh is used
- SCPP-4961: Regex dialplan affects also SUBSCRIBE URI
- SCPP-4596: although user_active is disabled the phone still sends REGISTER to the registrar until performing a reboot
- SCPP-4705: P-Asserted-Identity number part isn't recorded in call history
- SCPP-4732: OpenSips - phone does not register due to ignored expires header, gruu
- SCPP-4740: Phone does not reboot when a uaCSTA session is the only active call
- SCPP-4758: Astimax - phone loses Registration
- SCPP-4779: Park+Orbit is broken
- SCPP-4815: PUBLISH contains a body in refresh requests
- SCPP-4836: Wrong dst port is used for voice mail if the registrar is not using the default port 5060
- SCPP-4848: DTMF SIP INFO not working in early-media state
- SCPP-4865: Park Service is shown as Connected Number for forked calls with the same number
- SCPP-4902: INVITE responded too incorrectly before the ACK of 180 ringing that included 100rel
- SCPP-4926: Phone looses presence subscription after receiving any response code 4xx without expires or expires 0
- SCPP-4968: Show message This call may take longer to complete. Network may be busy only if inside 199 the ms-diagnostics is set to 5 (Insufficient bandwidth to establish session)
- SCPP-4683: Broadsoft - BLF does not work any more with default function key settings
- SCPP-3839: Broadsoft - phone shows HOLD state even when HOLD Request was rejected / Unhold not possible
- SCPP-4812: g729 codec choice incorrectly includes annexb=no in SDP
- SCPP-3791: presence doesn't work after the SIP proxy is down
- SCPP-3840: Broadsoft/Timer Support - phone adds required header even when not necessary / not advised
- LANGUAGE
- SCPP-4562: Wrong value changed for Slovenien Language, casing provisioning of the language not working anymore
- XML BROWSER
- SCPP-4802: SnomIPPhoneDirectory: the last entry item is highlighted instead of the first one
- SCPP-4731: Replacement of {index} in action URLs not working any longer
- LDAP
- SCPP-4918: LDAP result doesn't show No data available when no result is found
- SCPP-4715: LDAP number attributes are not applicable for ldap_display_name
- PROVISIONING
- SCPP-4334: If SIP password is changed via provisioning it seems not to get active
- SCPP-4612: TR-069 replacing more than one dynamic parameter does not work
8.7.3.19 Bugfixes
- AUDIO
- SCPP-4544: no ringing on speaker when a 2nd incoming call is waiting and the 1st call is terminated by going on-hook
- SCPP-4514: alphanumeric characters not sent in DTMF keys
- SCPP-4512: Pickup indication with function key configured as extension does not work
- SCPP-4485: Phone stops sending RTP and MediaDeamon crash is causing the phone to reboot
- SCPP-4477: No Audio can be heard when receiving Intercom/Push2talk calls and Type of Intercom Answering is set to "Handsfree" (snom PA1 only)
- SCPP-4564: Crash with Teles after < 100 simple calls
- SCPP-4431: Inband DTMF for FLASH doesn't work on 7xx Series
- SCPP-4415: no audio in a 4-part conference after selecting the first participant and pressing OK (snom 710 only)
- SCPP-4364: snom MP crashes when answering the call
- SCPP-4345: Dialtone during hold is missing after answering an incoming call from handset
- SCPP-4340: DTMF tones not being sent while showing a minibrowser image on the phone display (i.e. images from a Baudisch camera)
- SCPP-4335: Starcode-INVITE mistakenly establishes call with audio
- SCPP-4281: One-way audio for T-com users because of double codec in SIP header
- SCPP-3740: The first DTMF tone on a snom 821 using tone schemes like USA, UK, AUS is missing when the phone is in idle and the speaker is used (handset is not used)
- SCPP-3735: phone doesn't play ring tone after a conference call (snom 820 only)
- SCPP-3307: Transferring the same phone two times results in one-way b-channel with Teles
- SCPP-2830: Multicast Paging: Can't switch between speaker/handset during an active multicast on the destination site
- SCPP-1857: audio delay with outgoing calls affecting 821 and 870
- SCPP-4342: Phone doesn't ring when receiving second incoming call and auto_redial is enabled
- SCPP-3382: Multicast paging not working when assigned to soft key
- SCPP-3760: Phone (member of ring group) remains ringing even when another phone picks up the call
- SCPP-4598: Phone looses memory when changing volume
- SCPP-4591: One way audio after selecting one conference participant and pressing OK in a 4/5-part conference (snom 720/760 only)
- SCPP-4306: Audio: Bluetooth Headset on snom 7xx doesn't work properly
- SCPP-4181: Audio: Wireless headset doesn't work properly, audio is played via handset instead of headset and call is disconnected just press the headset button twice
- SIP
- SCPP-4579: After many transfers to the same number, each with different unique "Refer-To:" URI, the phone becomes slow
- SCPP-4524: snomMP happen to show 'SIP disabled' after SW-update
- SCPP-4508: Exention monitoring not working after transfer due to REFER being sent to C instead of A
- SCPP-4503: ACD user interface corrections
- SCPP-4499: Click To Call failed
- SCPP-4498: In header "WWW-Contact" include not a valid URL of the phone
- SCPP-4492: setting conferencing doesn't work for phones using joined call-screen
- SCPP-4438: When contact URI is set to anonymous@anonymous.invalid the phone does not show the display name on incoming calls (instead "unknown" is displayed)
- SCPP-4434: QSC: BargeIn/Notify freeze and ignored CANCEL request
- SCPP-4427: filter_registrar can by bypassed with IP call and remote control via CSTA is possible.
- SCPP-4425: Action URL will be executed even if the call has been answerd somewhere else
- SCPP-4417: on rejection of SIP hold request the call cannot be retrieved/hold/released any more
- SCPP-4414: SDP state sendonly/recvonly toggles back to sendrecv on incoming INVITE without SDP
- SCPP-4024: Phone sends "486 Busy" after "302 Moved"
- SCPP-3731: phone doesn't change the Caller-ID after transfer (from-change --> RFC 4916)
- SCPP-4539: Basic Call is immediately put on HOLD when the call is accepted
- SCPP-4552: @IP for "Extension Monitoring Call Pickup List URI" is not added automatically in the SUBSCRIBE packet as it was in the past
- PROVISIONING
- SCPP-4551: Wrong file name requested when using provisioning with DHCP option 67 (snom[XXX].xml-[MAC] instead of snom[XXX]-[MAC].xml)
- SCPP-4521: dialplan change via TR69 must be applied without reboot
- SCPP-4494: Uploading license file doesn't work in case of a setting change reboot
- SCPP-4420: provisioning of codec_priority_list not working correctly when permission flag is set
- SCPP-4237: TR69 param_map cannot be loaded when auto_reboot_on_setting_change is enabled and phone has reboot=true setting
- SCPP-3858: provisioning of phone GUI customization can cause the phone to stuck in reboot loop
- PUI
- SCPP-4509: Backlight turns on unexpectedly
- SCPP-4500: goto_monitor_state_on_line_activity and goto_virtual_keys_state_on_activity disturbing number input
- SCPP-4456: Park+Orbit softkey appears when handset is used (snom 370 only)
- SCPP-4451: setting mailbox_active not working
- SCPP-4435: display_method has no effect on caller lists
- SCPP-4432: XML Idle Screen incompletely or incorrectly loaded on reboot
- SCPP-4430: Idle state can't be reached by pressing cancel after unplugging ethernet cable in "Help" state
- SCPP-4426: PUI Timezone, Language, Tone Scheme: pressing the "Cancel" key may not function properly
- SCPP-4423: No Virtual keys button on transfer screen
- SCPP-4354: Caller Picture: snom 760 shows dialed calls as unknown but also with the correct call ID
- SCPP-3916: Call LED keeps flashing and the number of missed calls stays in idle screen all the time
- SCPP-2966: Park+Orbit key is not glowing/no signal if there is call in orbit
- SCPP-4418: Call Deflection: not reaction of push the key Transfer in the state Ringing
- SCPP-4412: edit_alpha_mode has no effect on the password in the Logon wizzard
- SCPP-4599: cannot enter menus or sub menus after address book resolution of caller
- SCPP-4573: Transfer of picked up call not working using key type extension and transfer destination = monitored extension
- NETWORK
- SCPP-4450: DHCP - 5 years DHCP lease is not accepted and the end result is snom sends a lot of requests.
- SCPP-2674: After upgrade VLAN settings get lost (7.3.30 to 8.7.3.15)
- SCPP-3798: Retransmitted NOTIFYs are leading to state update of BLF keys
- SCPP-4577: Phone resets the TIME-stamp to 0, but don't set the MARKER-bit
- LDAP
- SCPP-4541: LDAP: After multiple queries phone does not send searchRequests anymore
- SCPP-4530: If country and area codes are set and 0 is called, the phone looks up COUNTRY* in LDAP and stores all the results in one contact entry
- SCPP-4505: LDAP: no lookup of number to LDAP contact of incoming call or dialed number
- NONE: Wrong number shown when LDAP entry for incoming call has more than one number attribute
- SCPP-4407: Cannot dial if the beginning of the dialed number is found in LDAP and then the final number is no longer found
- WUI
- SCPP-4516: Function keys settings aren't stored properly
- SCPP-4441: WUI "Play ringer" does not work
- SCPP-4399: Error in log by bootup "wrong data CRC in data node" should not appear
- SCPP-4128: Core dumps cannot be downloaded reliably using support.htm
- SCPP-4487: Keypresses show up in syslog of the phone if US or GB tone scheme is used
- SCPP-4439: The settings URL http://<ip>/settings.cfg can not be fetched when the phone is in user mode and the right admin password is used
8.7.3.15 Bugfixes
- PUI
- SCPP-4144: Removing of Call Completion message will hang the phone (WUI and PUI)
- SCPP-3793: corrected typo in Internal Directory: Janurary instead of January
- SCPP-3823: Keypad debounce causing unexpected 'double-digit' dialing. Intermittent issue occurred once out of ten dials
- SCPP-3924: Phone crashes and keeps ringing after Function key "Forward to" is pressed during an incoming call
- SCPP-4007: phone misleads in phone menu
- SCPP-4107: Languages selections over PUI: phone shows Slovenian and Slovenscina
- SCPP-2387: in special case no photo will be loaded into internal directory
- SCPP-4126: names are not shown consistently in Call History
- SCPP-4137: 'Starred' DTMF digits are displayed inverse
- SCPP-4093: Seeing identity name on display on incoming calls
- SCPP-4147: System messages can not be opened out of the PUI menu
- SCPP-4162: deletion of input disturbed after using LDAP
- SCPP-4168: Favorites List doesn't show added entries
- SCPP-4176: Hot Desking: Function key - Logoff Identifies doesn't work on Snom 300
- SCPP-4183: Blind transfer not working when transfer target being dialed with function key (key type = extension)
- SCPP-4242: Caching of display name now configurable using cache_contact_details
- SCPP-4389: F_HOLD not activating LED when call is on hold
- SCPP-4361: Changing option show_clock does not reflect immediately
- SCPP-4323: Since 8.7.3.x numbers of incoming calls aren't matched correctly to the phone book like in 8.4.35
- SCPP-2958: Retrieve key not working with speed dial + DTMF
- SCPP-4278: Call is not listed in the missed calls list if user rejects the call
- SCPP-4253: In Call History, names are not shown consistently
- SCPP-4022: "Goto virtual keys on activity" does not work when key type is Contact List Buddy -> new setting states_ignored_in_goto_vkeys_on_activity
- SCPP-4248: Numbers in call-monitor-view get truncated after 12 digits
- SCPP-4129: Crash on snom 300 after 656 transfers
- SCPP-4121: Extension Monitoring: new incoming call for monitored extension overrides the old one even though the call is not answered
- SCPP-4182: Missed calls aren't signalled any more via message LED and display if missed calls where deleted via pressing INFO soft key before
- SCPP-4176: Hot Desking: Function key - Logoff Identifies doesn't work on Snom 300
- NONE: make displayed name scroll on snom 870 during a call, just like all the other models do
- SIP
- SCPP-3946: Unhold doesn't work with snomONE any more
- SCPP-3750: When doing attended transfer, REFER is sent to C instead of A
- SCPP-4205: Hold/unhold not possible after 30min in active call
- SCPP-3008: Hold not working if holding party is anonymous
- SCPP-3889: Call Deflection via Call Forwarding key (also with key SpeedDial) and redirect_ringing=off is successful
- SCPP-4171: Call Park feature: Call Logs showed ugly format or where loosing the display name after unparking the call
- SCPP-4074: Transfer: cannot end call if I received no NOTIFY after REFER
- SCPP-4386: Wrong handling from "Diversion" header, cases that a call which was forwarded won't forward again
- SCPP-4377: Park+Orbit not working. Call can be transferred and retrieved but for one time only
- SCPP-4311: call released by remote party due to missing ACK
- SCPP-4301: "Transfer failed" error message when performing an attended transfer hitting the keys pretty fast
- SCPP-3970: SIP INFO requests are rejected with 489 Bad Event
- SCPP-4094: DTMF key types not working unless user_dtmf_info is enabled
- SCPP-4319: subscribe transaction timeout error does not restart subscription
- SCPP-4297: 3CX: After attended transfer is completed, new call shows wrong call partner
- SCPP-3760: Phone (member of ring group) remains ringing even when another phone picks up the call
- SCPP-1330: phone hangs up secure conversation on hold after session timer has expired
- SCPP-4217: DFKS results in subscribe without Body -> DFKS not working
- SCPP-4112: comma leads to parsing problem with sip_cancel_reasons_to_ignore_missed_call
- PROVISIONING
- SCPP-3921: "Provisioning server failed" displayed although DHCP provisioning succeeds
- SCPP-4115: phone doesn't try all protocols if DHCP option 66 sends only IP address
- SCPP-3855: After factory reset phone doesn't send subscriptions configured for expansion module
- SCPP-4355: If a new account is reprovisioned during a call, the following REGISTER and INVITE packets still have some old information
- SCPP-4334: If SIP password is changed via provisioning it seems not to get active
- SCPP-4316: On Provisioning tbook is not being saved permanently
- SCPP-3858: provisioning of phone GUI customization can cause the phone to stuck in reboot loop
- SCPP-4239: snom710 does not automatically restart after 5 minutes on a failed software update
- SCPP-4174: On provisioning using redirection server with not resolvable URL phone gets into endless loop
- SCPP-4151: Provisioning through TR069 (Friendly): phone does not realise that provisioning is finished
- NETWORK
- SCPP-3832: Ethernet switch properties can neither be accessed nor adjusted
- SCPP-2762: WLAN not working if SSID and / or pass phrase contain one of the following special characters: "<>'&
- SCPP-4089: DNS: Underscore in default host name violating RFC
- SCPP-4053: Not well formed DHCPREQUEST in RENEWING state
- SCPP-3864: VLAN is not working
- SCPP-3920: snom 720/821 display wrong status on boot up when trying to authenticate with 802.1X on Freeradius server
- SCPP-4409: The phone sends multiple DHCP INFORM messages at a time
- SCPP-3875: DST of Namibia and Turkey isn't set correctly
- SCPP-4128: Core dumps cannot be downloaded reliably using support.htm
- WUI
- SCPP-4033: Secure web interface (https) is slow and slows down the phone
- SCPP-4038: WUI Access via HTTP is not possible when setting 'dns_domain' is empty using web browser Safari
- SCPP-4173: WUI message 'Apply setting changes? Reboot' is not shown on all WUI pages
- SCPP-3852: access via HTTPs not possible with Chrome
- SCPP-4119: Wrong displayed German umlauts in web interface confirming message
- SCPP-2256: Defined outgoing line being ignored when dialing out of directory using web interface
- SCPP-4327: WUI does not accept requested HTTP Host instead the local IP is written into a link at several features
- SCPP-2218: the button "Play Ringer" doesn't work when selecting the customer melody as user_ringer
- SCPP-4104: snom720 and snom760 showed the Mic volume settings on the web interface despite the fact that they can not be changed because of TIA requirements
- NONE: Show USB headset Audio Option for 720 and 760 only
- NONE: Adjusted German translations of PUI and WUI
- NONE: support.htm of 3xx phones is showing 'WUI core download option' even though 3xx phones aren't supporting it
- AUDIO
- SCPP-3751: snom 710: Phone sends a creaking noise after redial is accepted
- SCPP-3348: Media stack crashes (and reboots) when USB Blue Tooth is enabled first time after pairing by pressing the headset hard key
- SCPP-4138: Audio: MediaStack restarting and "All lines will be closed" on the display if snom 760/720 is using a Wireless Headset (through USB) not in sync
- SCPP-3887: PA1 does not play ringer, when Autoanswer has been switched off
- SCPP-3952: Pressing +SPKR key in handset mode (change to open listening mode) mutes the Handset speaker
- SCPP-4393: Wireless Headset: Putting a conference on hold and then resuming it again leads to MediaStack restarting
- SCPP-4330: snom 300 only shows 4 of available 10 ring tone melodies in PUI
- SCPP-3815: pickup_indication doesn't work any more
- SCPP-4320: disabled allow_rtp_on_mute has no effect (snom 720/760 only)
- SCPP-4308: No audio after unhold with holding_reminder set to "on"
- SCPP-4298: Multicast Paging send and receive not working
- SCPP-4223: Audio: 5-part conference doesn't work properly on snom 710
- SCPP-4286: When remote side is busy or rejects call, the busy tone is not heard
- SCPP-4276: Audio fails if the first conference participant presses hold in 4-part conference
- SCPP-3730: phone does not ring if call is on hold and incoming call (suppress_ringing_during_hold:off, cw_dialtone:off)
- SCPP-3892: Plantronics CS540 fast dialing for calls initiated by headset could result in not dialing out
- LDAP
- SCPP-4360: ldap_predict_text does not search all combinations
- SCPP-3507: LDAP directory with "predict text" enabled (T9), find only entries with the first letter of the button and a dot
- SETTINGS
- SCPP-4283: inconsistent entries for gui_fkey1 to gui_fkey4 ("key_event" needs to be replaced by "keyevent")
- SCPP-4155: XML Dial plan doesn't work if two matching strings with same length of chars exist in dial plan
- SCPP-4226: Watchdog isn't rebooting system anymore
- SCPP-4091: Can't set a match string dialplan.xml to be *
- XML BROWSER
- SCPP-4254: Phone does not exit from XML minibrowser at the end of the call
- SCPP-4336: When the XML Minibrowser shows an XML with a SnomIPPhoneImageFile Tag the Softkeys don't work and the image disappears.
- VPN
- SCPP-3142: the WWW-Contact headers should contain the openVPN address if the SIP packets are sent through the tunnel
- SCPP-3806: Snom 710: VPN isn't working
8.7.3.10 Bugfixes
- AUDIO
- SCPP-4076: Audio: after a few minutes of call I get no audio and then after hanging up I cannot make any new calls
- SCPP-4042: No audio in the next calls after connect with incorrect codec in SDP of "200 OK"
- SCPP-4040: When the phone plays a dial tone on handset/headset and the phone goes onhook the dialtone can be heard for a short period on the speaker.
- SCPP-4008: VAD/CNG not working with G.729AB on snom821/870
- SCPP-3980: snom760 shows an audio artifact every 5 second in certain environments when RTCP packet are received
- SCPP-3887: PA1 does not play ringer, when Autoanswer has been switched off
- SCPP-3867: Ringer tone in Handset if handset was not hung up after previous connection
- SCPP-3850: snom 320: sends a constant beep noise after call deflection
- SCPP-3819: Lync: CN (Comfort Noise) is not played if snom receives CN RTP packets
- SCPP-3815: pickup_indication doesn't works any more
- SCPP-3707: BUSY signal played out in speaker mode even though handset or headset is selected
- SCPP-3263: Phone plays ringback-tone if 183 is received without SDP - even if there was no 180 Ringing
- SCPP-2570: Multicast doesn't work after a call is received
- NONE: Discard buffered DTMF tone when stop command is received before playing
- NONE: dial tone and ringback dosn't work after call with comfort noise enabled
- NONE: synthesizer dosn't work after call with comfort noise enabled
- NONE: avoid codec switch on incoming silence packets for 720/760
- PUI
- SCPP-3938: Identity index is shown twice before the remote call partner
- SCPP-3979: Not delete the selected entry in all Call History lists (Missed, Received, Dialed)
- SCPP-3704: After setting a caller to the Deny-List by "long-press" the Cancel Button the caller is still able to call the phone
- SCPP-3948: OCI-P - Directory keys should be set by default to OCIP if setting user_server_type is set to 'Broadsoft'
- SCPP-4069: No ringing during attended transfer on incoming call. This is a call waiting scenario, so Call Waiting should be indicated. New setting call_states_when_knocking
- SCPP-4007: phone misleads in menu
- SCPP-3994: Phone puts current call on hold while on speaker, getting a new incoming call and picking up the handset. Switching the device should always stay with the current call.
- SCPP-3972: unknown shown as caller ID for all held calls
- SCPP-3954: Mute symbol is not indicate when the microphone of the active audio device has been muted. Snom300/320 now display a symbol when MUTE is activated during a call
- SCPP-3924: Phone crashes and keeps ringing after Function key "Forward to" is pressed during an incoming call
- SCPP-3903: Line Info Layer - is really ALWAYS visible if set to on
- SCPP-3896: Snom 870: Call LED keeps blinking and display shows "1 missed call" although call list has already been viewed
- SCPP-3882: PUI: snom300 - internal address book cannot dial first entry ad hoc
- SCPP-3873: Setting an empty display name for identity through phone menu results in __Y__
- SCPP-3865: SnomMP does not show fkeys "Kick" and "Split" in conference
- SCPP-3839: Broadsoft - DUT shows HOLD state even when HOLD Request was rejected / Unhold not possible
- SCPP-3828: The phone doesn't start ringing when a 2nd incoming call is already waiting and the 1st call is terminated by going on-hook
- SCPP-3823: Calling Features: Dialing - Keypad debounce causing unexpected 'double-digit' dialing. Intermittent issue occurs once out of ten dials.
- SCPP-3813: Going on-hook doesn't terminate the active call during call waiting scenarios
- SCPP-3796: snom870: not possible to set up encrypted WiFi via PUI
- SCPP-3792: (snom7xx) When a Plantronics USB headset is used, the phone is in idle, headset is not selected and the headset button is pressed, the phone will toggle between idle and call screen.
- SCPP-3784: Line Info Layer disappears on incoming call
- SCPP-3773: Graphical Issues when pressing function key for system info while in a call
- SCPP-3712: Call toggling didn't update remote call partner on display
- SCPP-3613: "Number Guessing" with LDAP is not usable
- SCPP-3335: Lock symbol not shown in SRTP/TLS call
- SCPP-2823: Hebrew texts are not written right to left on PUI
- SCPP-3706: Call Completion doesn't work consistently
- SCPP-3654: Redial list bug after calling a phone in DND mode (snom 360 only)
- SCPP-3795: pressing redial key twice doesn't lead to dialing the last dialed number.
- SCPP-3827: Snom320 reacts very slowly over time (visible through delayed blinking of clock colon) and finally crashes
- SCPP-3981: snom821 freezes in idle state
- SCPP-3989: calls disappear due to very fast brokering via touch gui (snom 870 only)
- NONE: using 15 volume steps in GUI although audio only has 8 (snom720)
- LDAP
- SCPP-3200: Phone shows ??? for some ActiveDirectories schemas
- SCPP-3884: the phone should hide the LDAP search display if the search had no results during number guessing
- SCPP-3812: it takes much too long between the first and second LDAP search when dialing and using number guessing
- SCPP-3976: LDAP directory search is not usable for fast input
- SCPP-3922: Delay during dialing with enabled number guessing (third digit displayed too slowly)
- PROVISIONING
- SCPP-4111: Phone shows 'Provisioning in progress' repeatedly when using TR-069
- SCPP-4027: cannot provision with tftp:/hostname
- SCPP-4004: Function key assignment not updated on settings sync (no subscriptions being sent out)
- SCPP-3974: phone retries to provision several times and then says Provisioning failed although provisioning succeeds
- SCPP-3971: Configured provisioning_order not being followed properly (after successful provisioning phone should start and don't send additional requests)
- SCPP-3959: when provisioning with DHCP option 66, phone still tries to get snom300-firmware.htm from provisioning.snom.com
- SCPP-3921: server failed display although DHCP provisioning succeeds
- SCPP-3898: server failed display although provisioning is disabled
- SCPP-3871: Canceling provisioning request results in incomplete error message
- SCPP-3870: MKA: After FW update SIP account gets lost and provisioning via TR69 doesn't work anymore
- SCPP-3810: extension key issues dialog-subscription although user_server_type is set to 'Broadsoft'
- SCPP-3800: PnP does not work in VLAN environment
- SCPP-3725: Can't cancel provisioning request if server is not reachable
- SCPP-3420: TR69 - Motive closes connection after Device. GetParameterValues
- WUI
- SCPP-3911: only up to 64 https web client requests are possible
- NONE: support.htm of 3xx phones is showing 'WUI core download option' even though 3xx phones aren't supporting it.
- NONE: Adjusted German translations of PUI and WUI
- NONE: New PUI and WUI translations for Turkish
- NONE: Small changes in Italian and French
- NETWORK
- SCPP-4089: DNS: Underscore in default host name violating RFC
- SCPP-4076: Audio: after a few minutes of call I get no audio and then after hanging up I cannot make any new calls
- SCPP-4053: Not well formed DHCPREQUEST in RENEWING state
- SCPP-3810: extension key issues dialog-subscription although user_server_type is set to 'Broadsoft'
- SCPP-3778: rtp_early_media_ring_fallback seems not to work
- SCPP-3777: missing SDP offer on the first response to an incoming INVITE w/o SDP
- SCPP-3742: (snom 820) Wifi is not working with Ralink 3070 USB stick.
- SCPP-3732: Multicast - Paging not working if Multicast Listening is activated at the same time
- NONE: Domain parts delivered via DHCP option 120 were separated wrongly by ':'
- NONE: Improved ethernet cable detection - first cable state event can result in a reregister before inital setup is complete
- NONE: Improved ethernet cable detection - removed state_cable to not block the phone when cable is pulled - message and status message are shown instead - with configured WLAN only status message is shown - only state changes are now propagated from LID to LCS to eliminate unnecessary cable events in WLAN scenario
- SIP
- SCPP-4077: cannot make simple conference on Teles server
- SCPP-4002: 720s locking up in local 'hold'
- SCPP-3978: Incoming INVITE with Require: 100rel, but without Supported: 100rel header should trigger PRAck flow
- SCPP-3946: Unhold doesn't work with snomONE any more
- SCPP-3008:Hold not working if holding party is anonymous
- SCPP-3232: lost register after INVITE with RFC 2543 Syntax
- SCPP-3748: Park+Orbit not working. Call can be transferred but not retrieved
- SCPP-3750: When doing attended transfer, REFER is sent to C instead of A
- SCPP-3776: snom sends sendonly instead of receive only after multiple HOLD/UNHOLDS
- SCPP-3805: Call deflection fails if transfer target is dialed using fkey type extension
- SCPP-3889: Call Deflection via Call Forwarding key (also with key SpeedDial) and redirect_ringing=off is successful
- SCPP-3840: Broadsoft - Timer Support - Phone adds required header even when not necessary/not advised
- SETTINGS
- SCPP-4101: PhoneWantsReboot and PhoneHasDisabledSipStack are written together in status_msgs_that_are_important
- XML BROWSER
- SCPP-4003: Broadsoft - DFKS - DUT crashes when using ACD feature
- SCPP-3996: XML-minibrowser <SoftKeyItem>-elements are not displayed if context sensitive keys (F1-F4) are addressed
- SCPP-3579: minibrowser.htm does not replace Query variables correctly
- NONE: Render display after translation of fkeys (label, icons) for main tag SnomIPPhoneText.
- HEADSET
- SCPP-3892: Plantronics CS540 fast dialing for calls initiated by headset could result in not dialing out
- NONE: snom BT USB Headset did not work anymore
- TR-69
- NONE: TR-069 missing initialization
- NONE: Provisioning via TR-069 isn't becoming active without reboot.
- NONE: TR-069 Motive Policy chaining was not working as phone accepted more than one connection request.
- NONE: If TR-069 is used checksync NOTIFY triggers a connection request.
- Vision
- SCPP-2388: Snom Vision Speed Dial: Cannot initiate/cancel outgoing calls or answer incoming calls
8.7.3.7 Bugfixes
- UC
- SCPP-3645: DTMF issue in 911 scenarios with enabled keyboard lock
- PUI
- SCPP-3684: Phone doesn't show correct name out of internal address book if entry was changed
- SCPP-3659: Caller picture doesn't work.
- SCPP-2579: stop refresh timer for digital clock in case of showing XML idle screen
- SCPP-3649: After LDAP query delete digits by number editing doesn't work (snom 870 only)
- SCPP-3653: LDAP - incoming call: name from LDAP directory is not complete on the LCD, if show the incoming/missed call list.
- WUI
- SCPP-3687: Pressing # Key via remote doesn't work any more.
- SCPP-3636: Option to force Gigabit Ethernet is missing. (snom720, snom760 only)
- NETWORK
- SCPP-3655: 'netcat' server port does not get applied
- SCPP-3582: Phone doesn't display why it's restarting on DHCP server sending DHCP NAK/Decline
- SCPP-3657: PnP does not work, phone replies with 404 to NOTIFY.
- SIP
- SCPP-3651: Broadsoft: Voicemail-Retrieve - DUT should call user mailbox index if message account not specified in MWI NOTIFY
- SCPP-3588: DTMF Outband SIP INFO: keytones for "star" (*) is not working any more
- SCPP-3595: send 481 Reject again on initial Invite with To-tag
8.7.3.6 Bugfixes
- SIP
- SCPP-3506: FIX - Broadsoft - Session Audit - DUT does not send SIP 481 (Call Leg) after power cut, 481 will be sent if to tag of req is set
- SCPP-3601: FIX - Broadsoft - SCA - DUT activates second sca line key after receiving 403 Forbidden
- PUI
- SCPP-3565: FIX - Snom870 Internal Directory: formatting errors in Directory Key
- NONE: FIX - Language name of Slovenscina is misspelled
- SCPP-3465: FIX - LED behaviour after pressing Function Key (Redial, Directory) not correct/inconsistent
- SCPP-2579: FIX - XML Idle Screen - Always shows Digital Clock.
8.7.3.5 Bugfixes
- AUDIO
- SCPP-3592: FIX - (snom8xx) The first button pressed while trying to dial a number with German tone scheme is always heard.
- SCPP-3627: FIX - (snom821, snom870) Using outband DTMF in a call, although inband is negotiated.
- PUI
- SCPP-3602: FIX - Delete fkey is wrongly displayed as "F_DELETE" within call lists screens.
- SCPP-3568: FIX - Malformed error message if LDAP isn't initialized.
- SIP
-
SCPP-3586: FIX - If the internal address book has a lot of entries, the SIP responses of the phone are delayed.
- TLS
- SCPP-3622: FIX - Could not register via TLS with Lync Server.
- PROVISIONING
- SCPP-3551: FIX - Provisioning fails and endless loop when client http username/password are used. Was affecting all kinds of webclient requests
8.7.3.4 Bugfixes
- AUDIO
- SCPP-3606: FIX - No synthesizer sound output on snom720/760 after dialing a not existent number on UC account
- NETWORK
- SCPP-3616: FIX - (snom821/870/720/760) Freeze during boot if Wifi is configured but no Wifi stick is present.
- PUI
- SCPP-3518: FIX - Broadsoft - AOC-D - Total charge in last 200 OK not presented in PUI if DUT hangs up.
- SCPP-3563: FIX - Cannot delete entry of internal addressbook via PUI. (snom300 only)
- SCPP-3567: FIX - Missed calls can't be deleted and no user details are shown.
- SCPP-3587: FIX - Phone does not display incoming desktop messages correctly. Don't show 'From' information. Only the message text should be shown. (snom720 only)
- SIP
- SCPP-3549: FIX - UPDATE-messages are answered with 500 Server internal error.
- SCPP-3571: FIX - Broadsoft - DFKS subscription handling on network loss.
- SCPP-3597: FIX - Broadsoft - Reboot initiated by changing display name.
- TLS
- SCPP-3519: FIX - Empty TLS certificate option needs to be split for HTTPS and SIPS.
- UPDATE
- SCPP-3608: FIX - Reboot loop or failing update if making update via provisioned ASCII-text-based setting file. Comparison of old and new firmware URL is now using WebUri class to avoid string compares which may lead to wrong results.
8.7.3.3 Bugfixes
- PUI
- SCPP-3183: FIX - Keyboard freezes sometimes (snom 821 only)
- NONE: FIX - Call list entries already in contact pool, are not properly handled during initialization from config.xml. They had the wrong memory manager id
- SCPP-2732: FIX - Attended transfer by pressing the transfer key twice is not working any more. Attended transfer on calling inconsistency across devices (snom 300 only)
- SCPP-3535: FIX - Attended transfer on calling inconsistent across devices
- SCPP-3542: FIX - redial hard key or soft key doesn't do redial. (snom 870 only)
- SCPP-3552: FIX - If the local address book has a lot of entries and the call lists (missed, dialed, received) are full, the phone reacts very slowly on keys redial and soft key call history
- LDAP
- SCPP-3121: FIX - LDAP lookup for outgoing call is not working correctly
- SIP
- SCPP-3497: FIX - Phone reboot on missing SDP m lines
- SCPP-3506: FIX - Broadsoft - Session Audit - DUT does not send SIP 481 (Call Leg) after power cut
- SCPP-3524: FIX - Broadsoft - SCA - DUT sends UNSUBSCRIBE after not succesful SUBSCRIBE (SIP 480) + LED stays on.
- SCPP-3545: FIX - Broadsoft - Connected Line Presentation Update after Call Forward - DUT does not answer with ACK to 200 OK.
- UPDATE
- NONE: FIX - (snom7xx, snom8xx, snomMP) Update isn't working in load balanced web server environment. Providing now unresolved FQDN in update URL.
- NONE: FIX - Provisioning using an invalid setting server URL was not handled properly.
- SCPP-3479: FIX - phone does not restart if FW download server is not available.
- SCPP-3482: FIX - If a software update fails, the firmware status stays untouched and prevents further updates using the same version. Now status message shows failed update hint and allows retry. Removing new status message FirmwareUpdateFailed from settings status_msgs_that_are_important, status_msgs_that_are_essential or status_msgs_that_show_directly avoids showing the new status message. Setting value of firmware_interval can be set to 60 or bigger only to avoid to fast loops if firmware update fails.
8.7.3.2 Bugfixes
- SIP
- SCPP-2638: FIX - OCS: Phone does not retry connecting with an exponential back-off algorithm in case of network loss. Use now new setting retry_after_failed_register for random reregistering after reboot, ethernet replug or TCP reconnect.
- SCPP-3475: FIX - snom370 rejects a ringing call twice.
- SCPP-3481: FIX - Broadsoft - SCA - Call Info Public Hold / Bridging is not working
- SCPP-3483: FIX - a VIA line with SIP/7.0/UDP will be rejected, but not to the network
- PUI
- NONE: FIX - entering LDAP-screen failed: when pressing "remote-addr.book in idle" and then selecting LDAP in pop-up-choice (between contacts and LDAP) the PUI displayed LDAP-screen for a split-second but immediately returned to idle (snom 870 only)
- NONE: FIX - Support-menu did not display correctly. Second line was: "navigate your webbrowser ..." instead of: "navigate your webbrowser to:" (snom 820 only)
- SCPP-2823: FIX - Hebrew texts are not written right to left on PUI - changed selected-line-marker on 300/320-selection-list so our Hebrew-reorder-routines properly detect them and flip from > to <.
- SCPP-3471: FIX - Some list box views like Help Screen or Settings Menu don't have context keys. Via new setting show_redundant_context_keys it can be configured to generally show navi-keys as context keys in minibrowser if it is displaying a list and doesn't have context keys defined on its own.
- SCPP-3472: FIX - Title of Directory screen is wrong.
- SCPP-3485: FIX - Initiating a transfer by pressing the transfer key 2 times does not work anymore. Now showing transfer proposal und edit-area. As soon as user starts typing, proposal to the hold-guy disappears and a transfer-press would blind-transfer to typed-in number. (snom870 only)
- SCPP-3486: FIX - Name from internal address-book not shown during call
- SCPP-3487: FIX - LDAP: wrong icons for selection of the upper, lower cases and numbers. Minibrowser now displays icons for known keys for snom870 as well. Removed tracking-mechanism in contact_list.xml, since with it, after typing a few numbers, one cannot simply exit by pressing X, since it goes back in history for each single character instead.
- SCPP-3490: FIX - Payment info (AOC) is not shown when call is terminated locally.
8.7.3.1 Bugfixes
- AUDIO
- SCPP-1312: FIX - srtcp mac check
- SCPP-2396: FIX - Keytones don't work
- SCPP-2542: FIX - DTMF tones while dialing not working on 821/870
- SCPP-2976: FIX - no ringing on snom3xx models after an previous call with comfort noise enabled
- SCPP-2989: FIX - add Lync Features to MediaDaemon (without ICMP)
- SCPP-3054: FIX - Audio: One-way-audio if different codecs from the SDP are used
- SCPP-3261: FIX - Terminate sounds are played very loud and can't be changed via volume keys
- SCPP-3271: FIX - OCS: snom3xx doesn't send DTMF tones correctly when navigate thru IVR
- SCPP-3337: FIX - Lync: One-way audio over TCP relay connections with snom821 when G.722 is negotiated
- SCPP-3388: FIX - No Audio with G726-32 on snom821/870
- SCPP-3391: FIX - DTMF stops audio
- SCPP-3461: FIX - Calling Features: DTMF - snom 760 sends last digit of dialed number for INVITE as DTMF
- SCPP-2830: FIX - Multicast Paging: Can't switch between speaker/handset during an active multicast on the destination site
- NETWORK
- SCPP-3449: FIX - Phone doesn't do DHCP on Windows DHCP environment
- SCPP-2862: FIX - IPv4 conflict probing was sometimes not working due to eth0 startup delay
- SCPP-2862: FIX - IPv4 conflict shows the remote MAC address
- NONE: FIX - (snom7xx, snom8xx, snomMP) Update isn't working in load balanced web server environment. Providing now unresolved FQDN in update URL.
- LDAP
- SCPP-3397: FIX - ldap_max_hits > 127 will cause LDAP lookup requests to fail with "invalid size limit"
- SCPP-3653: FIX - incoming call: name from LDAP directory is not complete on the LCD, if show the incoming/missed call list
- SCPP-3364: FIX - LDAP - Predict Text is not working as designed
- LLDP
- SCPP-2586: FIX - advertise received dscp value if untagged
- CSTA
- SCPP-3402: old-style http-csta is broken
- PROVISIONING
- SCPP-3450: FIX - Provisioning priority handling not working properly. Fixed case when setting server is pointing to known IP, which isn't running a server at the given port.
- SCPP-3086: FIX - SIP SUBSCRIBE PnP provisioning does not have priority over option 66 after NOTIFY without reboot. Added new internal setting pnp_server which holds the value of the SIP PnP setting server
- SCPP-3158: FIX - No VPN-tarball fetching without successful provisioning
- SCPP-3372: FIX - Branding not implemented (snom720 only)
- SCPP-3657: FIX - PnP does not work, phone replies with 404 to NOTIFY
- PUI
- SCPP-2579: FIX - XML Idle Screen - Always shows Digital Clock
- SCPP-3635: FIX - pressing twice OK key doesn't dial the latest dialed number
- SCPP-3637: FIX - Status information - context sensitive function key stucks
- SCPP-3465: FIX - LED behaviour after pressing Function Key (Redial, Directory) not correct/inconsistent
- SCPP-3603: FIX - touch screen: "upper/lower/number switch" and "DELETE button" don't work any more (snom 870 only)
- SCPP-3565: FIX - Internal Directory: formatting errors in Directory Key (snom 870 only)
- SCPP-2499: FIX - OCS Directory Search: Error when hitting backspace
- SCPP-2501: FIX - 320: Canceling ringer selection leads to account & registrar request
- SCPP-2577: FIX - CallerID: The callerID appears wrong after Transfer
- SCPP-2960: FIX - skip emergency number normalization on OCS/Lync accounts only
- SCPP-3094: FIX - Add active & idle back light setting (snom370 only)
- SCPP-3170: FIX - Reset via Web-GUI and selecting a language results in all prompts are in English and even predefined values (time zone, tone scheme) are as English was selected
- SCPP-3227: FIX - DUT does not update Caller Name on Display if changed in sequential calls
- SCPP-3233: FIX - Same button icon for "Change Active ID" and "Presence State" (snom 760 only)
- SCPP-3239: FIX - Call completion (CC) button displays text instead of icon.
- SCPP-3302: FIX - If the display name of the callee is too long the name is cutting off. It doesn't scroll. Scrolling is still not implemented but text is wrapped if ringer_animation is disabled (snom 370 only)
- SCPP-3313: FIX - Lync: Message LED won't turn off and status Information doesn't blink
- SCPP-3326: FIX - partial_lookup setting too liberal
- SCPP-3335: FIX - Lock symbol not shown in SRTP/TLS call.
- SCPP-3338: FIX - Keyboard lock can be circumvented by rebooting the phone
- SCPP-3354: FIX - Phone does not react on context sensitive key "OK" for turning on DHCP
- SCPP-3362: FIX - Lync: Emergency call looses audio if "Transfer" is pressed.
- SCPP-3366: FIX - Lync: Line switching during emergency call is not blocked
- SCPP-3369: FIX - Lync: Wrong remote party displayed after transfer to external number by Lync client
- SCPP-3370: FIX - Menu diction in the German phone PUI is bad
- SCPP-3374: FIX - nexpected string from SIP header is shown by incoming transfer call (snom870 only)
- SCPP-3389: FIX - Icon Tag in Minibrowser does not load icons from HTTP URLs any more
- SCPP-3413: FIX - Star digit is causing wrong editing behavior in alpha mode
- SCPP-3427: FIX - Message about DHCP request is not shown on the screen (snom320 only)
- SCPP-3442: FIX - The configuration file for fkeys 'fkey.xml' can not be saved to flash since it is too big if XML definitions are being used. The limit is 150k now, it was 20k.
- SCPP-3446: FIX - Call lists cannot be cleared
- RTCP
- SCPP-1335: FIX - incorrect packet and octet count in RTCP Sender Report
- UC
- SCPP-2806: FIX - User needs to be able to change the http server user and password (http_user, http_pass) and the ocsip user and password (ocip_username, ocip_password) when user mode is on
- SCPP-3417: FIX - Double/interfering ring tone on with UC version when calling an external number (snom 720/760 only)
- SCPP-3437: FIX - LYNC: Snom 300 crashes and restarts in call deflection scenario of Lync client
- SCPP-3316: FIX - Lync: Call between Aries IP Phone and Snom 300 from different Pools causes snom 300 to crash and reboot
- SCPP-3387: FIX - Lync: Resolution of FQDN for AV-edge server fails if more than one A record is returned
- SCPP-3295: FIX - LYNC: redial with E.164 causes a malformed INVITE request
- SCPP-3145: FIX - OCS: call cannot be terminated after changing the OCS Account Data to another OCS user (remoteUser only)
- SIP
- SCPP-3405: FIX - Phone no longer creates subscriptions for Vision virtual keys
- SCPP-3406: FIX - Phone doesn't create subscription for BLF buttons with context "Active"
- SCPP-3601: FIX - Broadsoft - SCA - DUT activates second SCA line key after receiving "403 Forbidden"
- SCPP-1140: FIX - remote party may transfer a call in a local conference
- SCPP-1633: FIX - Broadsoft SLA - Barge-in changed from SRTP to RTP and vice versa
- SCPP-2841: FIX - identity 12 outbound proxy will be used to filter also requests directly to the phones IP address
- SCPP-2863: FIX - Broadsoft: CFA doesn't work properly. correct subscribe is sent too late
- SCPP-3153: FIX - Request Start Line and CSeq Method Mismatch (RFC 4475 Page 32 3.1.2.17)
- SCPP-3206: FIX - Broadsoft - Connected Line Restriction after CFW - DUT does not show restricted number
- SCPP-3211: FIX - automatic reregister on 423 Interval too brief response
- SCPP-3221: FIX - incoming diverson-inhibit param to avoid phone diversion
- SCPP-3223: FIX - Broadsoft - DFKS - DND Synchronisation only with active identity
- SCPP-3225: FIX - Broadsoft - Agent Logged_In triggers also SUBSCRIBE for "Agent State Not Ready"
- SCPP-3229: FIX - Broadsoft - SCA - Refresh Line-seize fails
- SCPP-3258: FIX - Broadsoft - BLF - Parked Against indicator. A slow blinking LED indicates Parked Against state.
- SCPP-3246: FIX - fix double DTMF via SIP INFO and RTP stream
- SCPP-3251: FIX - Broadsoft - Network based 3way - Server does not accept REFER
- SCPP-3398: FIX - Phone looses subscription after some time.
- SCPP-3422: FIX - Phone sends 180 Ringing too late, resolved by sending 100 Trying earlier
- SCPP-3451: FIX - for orange, the Refer-To header SHALL contain the addr-spec of URI rec in the Contact header of the 200 OK resp to the INVITE sent to the conference
- SCPP-471: FIX - reworked music on hold to supported SRTP
- WUI
- SCPP-3415: FIX - Remote numbers are not shown in call lists of the flash plugin anymore if Flash plugin is enabled
- SCPP-3447: FIX - Selecting item from WUI call list crashes phone
- SCPP-2969: FIX - Phone hangs if PCAP Trace is retrieved during call and trace is not stopped
8.7.2 Bugfixes
- PUI, Minibrowser
- (8.7.2.9) SCPP-2577: FIX - Caller ID: The Caller ID appears wrong after Call Transfer.
- (8.7.2.8) NONE: FIX - (snom300) Secure communication lock icon is never shown.
- (8.7.2.8) SCPP-2977: FIX - E.911 fails to submit location on redial. Call an Emergency number out of a Call List works now.
- (8.7.2.8) SCPP-3169: FIX - (snom720, snom760) Russian and Hebrew fonts are missing.
- (8.7.2.8) SCPP-3170: FIX - Store/Apply Language change immediately if wizard is running.
- (8.7.2.8) SCPP-3219: FIX - Saving/reloading of call history lists is faulty.
- (8.7.2.8) SCPP-3281: FIX - (snom870) No call transfer with number from contact pool (call list) possible.
- (8.7.2.8) SCPP-3286: FIX - Action URL for event on hook not always being sent.
- (8.7.2.8) SCPP-3289: UPD - (snom720, snom760) Check whether 4+1 conference is possible (currently pure unencrypted G722 only).
- (8.7.2.8) SCPP-3305: FIX - unknown is shown instead of Caller ID on in- and outgoing calls.
- (8.7.2.8) SCPP-3288: FIX - (snom760) LED indication for missed calls is missing.
- (8.7.2.7) SCPP-3276: FIX - (snom760,snom820,snom821) Selected ABS line isn’t scrolling until the whole line is shown. Text scrolling range was very limited. Increased to twice the display size.
- (8.7.2.7) SCPP-3277: FIX - Selected ABS line isn’t called by lifting handset. Lifting handset in ABS/LDAP will call the entry now.
- (8.7.2.7) SCPP-3279: FIX - (snom300) Can’t set HELP on Fkey in state idle.
- (8.7.2.7) SCPP-3280: FIX - (snom300, snom320) Phone does not scroll horizontally in ringing state. Adjust scrolling width if arrows are displayed in selection list.
- (8.7.2.7) SCPP-3284: FIX - (snom820,snom821) PUI shows lock symbol after deactivating keyboard lock.
- (8.7.2.7) SCPP-3285: FIX - (snom300) No backspace available in edit transfer number.
- (8.7.2.5) SCPP-2766: FIX - Caller ID update on the phone using SIP INFO issue.
- (8.7.2.5) SCPP-3236: ADD: New menu entry call voicemail in Identity menu. If new voice messages are available offer retrieve on ENTER key (snom300).
- (8.7.2.5) SCPP-3260: FIX - Scrolling with navigation key doesn’t work properly in Time Zone and Tone Scheme selection. Accept navigation key events in sequence only and not in parallel.
- (8.7.2.5) SCPP-3264: FIX - Was missing feedback after a new contact has been created. Show saved message for internal Directory handling.
- (8.7.2.3) SCPP-3182: FIX - Inform Contact Pool about chosen LDAP contact. Then it can be used for showing contact details on screen. Fixed wrong comparison of parallel requests.
- (8.7.2.2) SCPP-3172: ADD - Show prompt for Directory Search.
- (8.7.2.2) SCPP-3196: FIX - (snom360) Is using UTF8 chars out of bounds.
- (8.7.2.1) SCPP-2998: FIX - Preselection is dialed immediately when phone goes offhook. Don’t dial preselection immediately.
- (8.7.2.1) SCPP-3080: FIX - Inform user about DFKS sync failure.
- (8.7.2.1) SCPP-3125: FIX - Only one contact number (mobile) is shown in contact search. Show all numbers of a contact in contact search.
- (8.7.2.1) SCPP-3130: FIX - Auto Dial in contact lists isn’t working.
- (8.7.2.1) SCPP-3132: CHG - Empty Contact List now shows different texts for no results and initial instructions.
- (8.7.2.0) NONE: FIX - Light line-key (type: extension) after having picked up remote call with it.
- (8.7.2.0) NONE: FIX - (snom300) Can now use again the speaker-key in dial-screen to toggle between headset and speaker.
- (8.7.2.0) SCPP-1169: FIX - context key Pool not working correctly. Contact pool refactored and is based on XML now.
- (8.7.2.0) SCPP-2126: FIX - (snom300, snom360, snom820, snom870, snom_MeetingPoint) Wizard problems after reset.
- (8.7.2.0) SCPP-2195: FIX - (snom360) Inconsistent and wrong behaviour of language and dialtone wizard. Handling is unified now using the wizard (used for timezone, language, tonescheme) for all phone types.
- (8.7.2.0) SCPP-2397: FIX - Call Completion doesn’t work with party on hold.
- (8.7.2.0) SCPP-2599: FIX - Motion JPEG doesn’t work. Show scaled down images from motion-jpeg-stream.
- (8.7.2.0) SCPP-2680: FIX - (snom300, snom320) Call timer on screen freezes when starting Conference. New display design for conference state.
- (8.7.2.0) SCPP-2681: FIX - Automatic redial doesn’t show the counter going down. Split or reduce text for Auto Dial display.
- (8.7.2.0) SCPP-2683: FIX - Call not listed in received calls on Call Pickup.
- (8.7.2.0) SCPP-2687: FIX - XML Dialplan does not behave as expected. Fixed single digit XML dial plan matches.
- (8.7.2.0) SCPP-2699: FIX - One character not displaying correctly in text at bottom of screen. Don’t show unprintable characters in status line.
- (8.7.2.0) SCPP-2700: FIX - Call Completion offered when phone cancels call. Don’t offer call completion if call was cancelled locally.
- (8.7.2.0) SCPP-2701: FIX - Call Completion cancelled but still dial screen visable for a short moment. Don’t switch to state idle if call completion is wanted.
- (8.7.2.0) SCPP-2710: FIX - (snom370, snom820, snom821) SRTP and PUI Lock Indication does not work. Show icon for SRTP connection.
- (8.7.2.0) SCPP-2718: FIX - Test Ringer played out even after leaving the menu point. Test ringtone will be stopped after leaving the ringtone menu entry.
- (8.7.2.0) SCPP-2747: FIX - Expansion Module - Version not shown in System Information. Show count of expansion modules and version number in system information.
- (8.7.2.0) SCPP-2750: FIX - (snom300, snom320) Can’t change the input mode (alpha mode, numeric mode) in LDAP Directory. New global edit mode toggles by pressing * for 1sec.
- (8.7.2.0) SCPP-2765: FIX - LEDs of Fkey type Call Agent aren’t updated.
- (8.7.2.0) SCPP-2780: FIX - Value changes of scroll settings weren’t applied immediately.
- (8.7.2.0) SCPP-2803: FIX - You can not dial the entered number when number guessing is on. Key enter will force a query in case of directory search. For number guessing it will dial the input.
- (8.7.2.0) SCPP-2814: FIX - Letter T was missing in Hungarian language when entering text within PUI.
- (8.7.2.0) SCPP-2819: FIX - Blank screen when LDAP lookup is forced with right navi key. Contact details can be shown with right navi key. If no details available a message will be shown.
- (8.7.2.0) SCPP-2848: FIX - Lock Keyboard - After entering new PIN phone stays with Minibrowser message. Now closing keyboard lock message after 3 seconds.
- (8.7.2.0) SCPP-2900: FIX - Clearing missed calls with cancel shows Key unassigned.
- (8.7.2.0) SCPP-2912: FIX - Extension Monitoring (RFC4662): Incoming Calls on monitored extensions are not mapped correctly and pickup fails. Made pickup via subscription list work.
- (8.7.2.0) SCPP-2948: FIX - Message LED not working.
- (8.7.2.0) SCPP-2957: FIX - Deleting selected entry in any Call History list doesn’t work. Delete the selected entry and not the first one out of a call list if delete key was pressed.
- (8.7.2.0) SCPP-2960: FIX - Don’t normalize emergency numbers.
- (8.7.2.0) SCPP-2973: FIX - Selection list of Tone Schemes isn’t working properly. Fix empty selection list in wizard (tone scheme view).
- (8.7.2.0) SCPP-2979: FIX - (snom300) Call Deflection and Blind Transfer do not work.
- (8.7.2.0) SCPP-2995: FIX - Call Completion offered always even if the called party was not busy. Don’t offer Call Completion in state calling (softkey only).
- (8.7.2.0) SCPP-3037: FIX - Number Guessing does not work if entering more than 4 digits. Different handling during number guessing for starting the handler triggered by timeout or by keystroke.
- (8.7.2.0) SCPP-3047: FIX - Phone shows only LDAP SN instead of full CN in call screens.
- (8.7.2.0) SCPP-3074: FIX - BLF button event HOLD is not working. Line keys of type BUTTON show on hold in Snom8xx PUI when corresponding button is reported to have color hold.
- (8.7.2.0) SCPP-3085: FIX - (snom870) GMT +-# is not shown in timezone list. Show timezone hours in timezone menu.
- (8.7.2.0) SCPP-3087: FIX - (snom870) Offered dialtone in initial wizard is not always correct. Show pre-selected timezone in list view.
- (8.7.2.0) SCPP-3091: FIX - (snom870) Call Completion is offered immediately and misbehaving if call is rejected by callee. Call Completion fixed for redial or local call abort.
- (8.7.2.0) SCPP-3097: FIX - It is possible to redial from an empty Call History list. Ignore empty call list entries for redialing.
- (8.7.2.0) SCPP-3104: FIX - BLF on snom vision / virtual keys on phone also pop up. Don’t show virtual key activities for external keys (snom Vision, Expansion Module).
- (8.7.2.0) SCPP-3105: FIX - Call Transfer/Call Deflection - Numbers of involved phones are not updated/No coherent behaviour. Update display informations of caller based on SIP messages.
- (8.7.2.0) SCPP-2702: FIX - Set up 3 SLA lines, incoming call makes two LEDs illuminate. Removed redundant LED control for SLA.
- (8.7.2.0) SCPP-3036: FIX - BLF - When transfering monitored extensions, BLF light freezes, no proper indication. Use unique dialog id for state notify.
- (8.7.2.0) SCPP-2734: FIX - (snom3xx,snom820) Possible phone freeze during use of Directory PUI.
- (8.7.2.0) SCPP-3012: FIX - Don’t refresh Minibrowser if it’s waiting for a web response.
- (8.7.2.0) SCPP-2417: Function key features: Bad xml response if clicking an URL button twice. Don’t fetch input URL if nothing was entered.
- (8.7.2.0) SCPP-2590: (snom300, snom320, snom82x) Setting cmc_feature removed, now done by call_screen_fkeys_on_… settings.
- (8.7.2.0) SCPP-2590: (snom300, snom320, snom82x) Setting deny_all_feature removed, now done by call_screen_fkeys_on_… settings.
- (8.7.2.0) SCPP-2590: (snom82x) Setting show_line_info removed, now done by individual line_info_at_… settings.
- (8.7.2.0) SCPP-2859: (snom300) Switching between headset and speaker is done differently now: when pressing short time, speaker key woks like normal speaker (no switching to headset) - long-press to speaker key will be treated as if the (not existend) headset key was pressed.
- UC
- (8.7.2.10) SCPP-2499: FIX - Microsoft OCS Directory Search: Error when hitting backspace.
- (8.7.2.7) SCPP-3283: FIX - Microsoft Lync: PUI sign-in wizard does not perform register after entering credentials.
- (8.7.2.9) SCPP-3313: FIX - Message LED won’t turn off and status information doesn’t blink.
- (8.7.2.9) SCPP-3316: FIX - Call between TI Aries based IP Phones and snom300 from different pools causes snom300 to reboot.
- (8.7.2.8) SCPP-3297: FIX - Backoff algorithm (retry_after_failed_register) timer does not reset after successful REGISTER. Reset random timer if register was successful.
- (8.7.2.8) SCPP-3299: FIX - Incorrect (Voicemail) SIP URI listed in Call Lists.
- (8.7.2.8) SCPP-3300: FIX - DUT crashes if connected to another domain.
- (8.7.2.8) SCPP-3304: FIX - E.911 - Display-Info This is an emergency call is not shown when performing an emergency call.
- (8.7.2.7) SCPP-3226: FIX - (snom300, snom320) Microsoft Lync: It’s impossible to set your own Presence state.
- (8.7.2.7) SCPP-3287: FIX - Microsoft Lync: PUI’s Call History doesn’t display the Time.
- (8.7.2.5) SCPP-2902: FIX - Microsoft Lync: Selecting Distribution Group causes phone freezing.
- (8.7.2.5) SCPP-2999: FIX - Microsoft Lync: MCU disconnect after 7:27 min - if invited via SIP address (basic MS - CCCP).
- (8.7.2.5) SCPP-3031: FIX - Microsoft Lync: MCU we send a BYE after 1:02 hour - if invited via SIP address (basic MS - CCCP).
- (8.7.2.5) SCPP-3051: FIX - Microsoft OCS/Microsoft Lync: Long delay before phone rings.
- (8.7.2.5) SCPP-3057: FIX - Microsoft OCS/Microsoft Lync: Failure to connect to TCP port of AV edge server puts ICE peer state machine into failed state.
- (8.7.2.5) SCPP-3067: FIX - Microsoft Lync: CAC - no display warning call may take longer - in CAC network busy calls from snom to Tanjay, Aries or Lync Client.
- (8.7.2.5) SCPP-3140: FIX - TCP reconnect back off. New default value set for retry failed register to 3,6:300.
- (8.7.2.5) SCPP-3166: ADD - Microsoft Lync: Escalating a two-party call to a conference fails when invoked by Lync Attendant.
- (8.7.2.5) SCPP-3216: FIX - Microsoft Lync: Cannot unlock phone keyboard by pressing OK. Set [Fkeys]] to ok, cancel for confirm keylock.
- (8.7.2.5) SCPP-3269: FIX - Microsoft OCS/Microsoft Lync: Turning off DND should delete user state instead of setting it to available.
- (8.7.2.0) SCPP-2820: FIX - Microsoft OCS: Media connectivity failure on load balanced AV edge servers.
- (8.7.2.0) SCPP-2868: FIX - Microsoft OCS: Crash caused by Call Access Control (CAC).
- (8.7.2.0) SCPP-2881: FIX - Microsoft OCS: Unsupported codec in SDP offer caused duplication of codec 0 in SDP response.
- (8.7.2.0) SCPP-2907: FIX - Microsoft OCS: No audio when phone is in TCP only mode.
- (8.7.2.0) SCPP-2908: FIX - Microsoft Lync: E.911 - Emergency calls cannot be dialed when phone is in locked state.
- (8.7.2.0) SCPP-2933: FIX - Microsoft Lync: INVITE from conference server fails.
- (8.7.2.0) SCPP-2794: ADD - UC edition supports the setting advertisement_url now as well, like all our other versions already do.
- AUDIO
- (8.7.2.8) SCPP-3289: UPD - G.722 is first in Codec list now - also for non UC versions.
- (8.7.2.7) SCPP-2360: ADD - (snom720, snom760) Missing GSM codec
- (8.7.2.2) SCPP-3194: FIX - SRTCP decryption error processing
- (8.7.2.1) SCPP-526: FIX - (snom3xx, snom820) Bad audio quality when using G.726 because of wrong packing order.
- (8.7.2.1) SCPP-3135: FIX - (snom720, snom760) Local DTMF echo always played out with maximum volume. Lowered volume now.
- (8.7.2.1) SCPP-3136: FIX - Comfort Noise / Silence Supression not working. Codec cn is only valid for snom3xx, snom8xx, but not for snom7xx and snom MeetingPoint.
- (8.7.2.0) SCPP-1424: FIX - (snom8xx) Auto Answer indication is inaudible. Now playing auto connect tone in full length.
- (8.7.2.0) SCPP-1694: FIX - Blind Transfer: Missing dial tone after pressing transfer key.
- (8.7.2.0) SCPP-2117: FIX - Missing busy tone.
- (8.7.2.0) SCPP-2601: FIX - Play busy tone in terminated screen.
- (8.7.2.0) SCPP-2742: FIX - Mixing dial tone and ring tone in ring tone menu if phone is off hook.
- (8.7.2.0) SCPP-2746: FIX - Changing ringer volume doesn’t work properly.
- (8.7.2.0) SCPP-2748: FIX - Call Completion: phone keeps playing busy tone the whole time during "Waiting". If no line is active stop playing synth sounds.
- (8.7.2.0) SCPP-2751: FIX - phone plays busy tone after a transfer (Call Released Notification is off).
- (8.7.2.0) SCPP-2854: FIX - Playing ringer on changing the volume doesn’t work properly.
- (8.7.2.0) SCPP-2855: FIX - Playing ringer from setting menu doesn’t work properly.
- (8.7.2.0) SCPP-2861: FIX - Incoming Intercom call cannot switch the audio-device unless it gets accepted.
- (8.7.2.0) SCPP-2968: FIX - (snom720, snom760) USB Headset keys cannot control the phone.
- (8.7.2.0) SCPP-1056: FIX - (snom3xx) If the option Silence Supression is enabled, the phone sends incorrect packets. Increasing sequence number on CNG packets and also add marker at the end of Comfort Noise.
- (8.7.2.0) SCPP-2666: FIX - (snom_PA1) Always send RTP instead of SRTP.
- (8.7.2.0) SCPP-2864: FIX - (snom3xx, snom820) En-/disable Comfort Noise depending on negotiated codecs with SDP offer/answers.
- (8.7.2.0) SCPP-2951: FIX - RTCP counter information incorrect. Was wrong fraction lost counter due to overrun.
- WUI,HTTP
- (8.7.2.8) SCPP-3259: FIX - nickname is misspelled.
- (8.7.2.2) SCPP-3186: FIX - Delete last Call History list entry or clear a list.
- (8.7.2.0) SCPP-1831: FIX - Deleting whole Call History lists with activated hidden tags wasn’t working. Hidden tags are now ignored for local connections.
- (8.7.2.0) SCPP-2295: FIX - (snom8xx, snomMP) Upload of WUI TAR archive doesn’t change WUI appearance.
- (8.7.2.0) SCPP-2649: FIX - Dropdown menu for configuring soft keys in WUI needs revision. Now Mute is available for Line and Speed Dial keys only. Clear Pickup Info has been removed.
- (8.7.2.0) SCPP-2936: FIX - Phone isn’t using absolute URI for 302 redirection (RFC 1945).
- (8.7.2.0) SCPP-3023: FIX - Deleting singe Call History list entries not possible. Remove Call History entries on index webpage fixed.
- (8.7.2.0) SCPP-2737: FIX - Phone does crash if downloaded file is too big.
- (8.7.2.0) SCPP-2856: FIX - HTTP Client Authentication Digest not working. Use relative URI in authorization part.
- (8.7.2.0) SCPP-3100: FIX - Don’t establish new HTTP Client connection if an older one is still in connecting state.
- (8.7.2.0) SCPP-2117: FIX - Removed unnecessary option off_when_terminating_calls in menu under advanced>audio>release_sound.
- (8.7.2.0) SCPP-2139: FIX - Setting apply_settings_timeout removed. Saving setting values changed via PUI to flash now always within a second, but setting values changed via WUI have to be applied manually before saved to flash.
- (8.7.2.0) SCPP-2698: FIX - Setting auto_connect_type removed since it’s obsolete.
- (8.7.2.0) SCPP-2720: FIX - Setting callpickup_dialoginfo removed, instead goto_monitor_state_on_line_activity is to be used.
- (8.7.2.0) SCPP-2720: FIX - Setting show_xml_pickup removed since it’s obsolete.
- (8.7.2.0) SCPP-2786: FIX - Setting redundant_fkeys replaced by disable_XYZ_soft_key_in_call settings. Available on all phones showing soft keys during call, except for snom MeetingPoint and snom8xx.
- (8.7.2.0) FIX - Removed settings multicast_address and multicast_port, which are obsolete since 8.2.1.
- SIP,RTP,SRTP,RTCP
- (8.7.2.7) SCPP-2274: FIX - Min-Expire-Header not recognized (423 too brief). Automatically re-register once with the Min-Expires value.
- (8.7.2.7) SCPP-3159: FIX - 180 Ringing instead 400 Bad Request error after Multiple Values in Single Value Required Fields
- (8.7.2.7) SCPP-3231: FIX - Phone does not remove bindings correctly if rebooted. New setting sip_shutdown_timeout.
- (8.7.2.5) SCPP-3203: FIX - After Receiving Call via CFW 181, DUT can not cancel call. Update callback_id on call forking to the final connection id.
- (8.7.2.5) SCPP-3204: FIX - Phone did not play Bellcore tones.
- (8.7.2.5) SCPP-3214: FIX - Reregister with Resource List Subscription via WUI Button was rebooting the phone.
- (8.7.2.5) SCPP-3243: FIX - Failover not working. Default transaction timeout shortened from 32 to 8 seconds (sip_request_timeout, Broadsoft only).
- (8.7.2.5) SCPP-3266: FIX - Set reciprocal_hold and refer_brackets to on if Server Type is Broadsoft.
- (8.7.2.3) SCPP-3136: UPD - Silence Supression/Comfort Noise not working. Codec cn is only valid for snom3xx, snom820, but not for snom821, snom870, snom7xx and snom_MeetingPoint.
- (8.7.2.2) SCPP-3152: FIX - Handle full dialog-info notify even if it is empty.
- (8.7.2.1) SCPP-1853: FIX - Setting reject_calls_with_603 isn’t working.
- (8.7.2.1) SCPP-3116: FIX - Codec CN is off by default.
- (8.7.2.1) SCPP-3147: FIX - Phone answers empty SDPs with pcmu codec only regardless of what is defined in the codec lists. Now offering all codecs on incoming INVITE without SDP (late SDP).
- (8.7.2.0) SCPP-830: FIX - If we send a CANCEL request, we have to wait for a 1xx-Response. Scheduling CANCEL if no response has been received yet.
- (8.7.2.0) SCPP-1237: FIX - Attended transfer while ringing. Avoid CANCEL on transfering an outgoing ringing call (added new setting: attendend_transfer_on_ringing).
- (8.7.2.0) SCPP-1820: FIX - Missing ACK for final response INVITE does not cancel the call. An missing ACK for 200OK responses will now release the call and a BYE will be send back.
- (8.7.2.0) SCPP-1914: FIX - Corrected handling of non-SRTP-holds (we never use SRTP during hold) in SRTP-calls.
- (8.7.2.0) SCPP-2215: DEL - Since phones can handle codecs dynamically, we removed the setting dtmf_payload_type in all phones except snomMP.
- (8.7.2.0) SCPP-2475: FIX - Phones do not apply the signaling_tos parameter. Update signaling tos on udp if the setting changes.
- (8.7.2.0) SCPP-2482: FIX - Problem with TCP DNS fail-over. On TCP/TLS check dirty host before connection attempt and packet routing.
- (8.7.2.0) SCPP-2638: FIX - OCS: Phone does not retry connecting with an exponential back-off algorithm in case of network loss. Use now new setting retry_after_failed_register for random reregistering after reboot, ethernet replug or tcp reconnect. Value can be single integer value (range 1 to this value) or a range like 2,10.
- (8.7.2.0) SCPP-2733: FIX - Improper retransmission timers for non-INVITE client transaction. Use Timer T2 for retransmissions in proceeding state on non-INVITE client transactions.
- (8.7.2.0) SCPP-2816: FIX - INVITE retransmission interval too short and issue if T1 is too large.
- (8.7.2.0) SCPP-2888: FIX - Premature release of a TCP candidate caused the phone to crash occasionally.
- (8.7.2.0) SCPP-2953: FIX - REGISTER and INVITE network failures aren’t reported via PUI.
- (8.7.2.0) SCPP-2955: FIX - DSCP value on SIP connections is wrong (not shifted).
- (8.7.2.0) SCPP-3001: FIX - One way audio after attended transfer when transferor is snom760 and transferee has version 8.4. Now preventing unhold during transfer operation.
- (8.7.2.0) SCPP-3002: FIX - No caller id update (transferee) on transferer. Inform PUI about a connection replacement to show correct display names (contact informations).
- (8.7.2.0) SCPP-3008: FIX - Hold not working if holding party is anonymous. Set original tag in FROM header in case of an privacy call (anonymous).
- (8.7.2.0) SCPP-3071: FIX - SIP message re-submits will not be stopped after server BYE. Skipping INVITE retransmissions (e.g. hold) on dialog teardown.
- (8.7.2.0) SCPP-224: GRUU ID isn’t preserved between reboots. The ID is fix for the device now.
- LLDP
- (8.7.2.1) SCPP-3039: FIX - Memory leak on handling EAP success/failure responses.
- (8.7.2.0) SCPP-2585: FIX - [[VLAN] ID over 255 was not working.
- (8.7.2.0) SCPP-2595: FIX - Set VLAN ID and priority (QoS) settings delivered via LLDP.
- TR69
- (8.7.2.0) SCPP-2873: FIX - Phone reports too many setting changes to TR69 application. Don’t report automated temporary changes of outgoing identity.
- UPLOAD
- (8.7.2.0) SCPP-2578: FIX - (snom MeetingPoint) Branding isn’t supported.
- (8.7.2.0) SCPP-3055: FIX - Fetching of upload files is failing if other provisioning requests failed before as well.
|