Firmware/V8/Release Notes/Change Log V8 4

From Snom User Wiki

Jump to: navigation, search
Features

8.4.20 Features

No Features

8.4.19 Features

PUI
Added: (snom300, snom320) Enabled feature of opening local directory record of current call. (SCPP-1897)

8.4.18 Features

ACTION URL
Added new action URL variable $nr_ongoing_calls that always contains the number of active calls. (SCPP-1919)
AUDIO
Reduced speaker volume steps to 7 (SCPP-1896).
Added option to send silent RTP’s on mic mute to avoid connection loss problems in certain environments.
TR-69
Added support for X_000413_MethodNames. (SCPP-1824)

8.4.17 Features

NETWORK
Added support for LLDP-MED (Link Layer Discovery Protocol-Media Endpoint Discovery).
Added support for 802.1X with eap-md5.

8.4.16 Features

No new features

8.4.15 Features

AUDIO
Added new setting dtmf_volume for locally played DTMF tones. Can be used to improve inband DTMF and avoid DTMF echo (snomMP). (SCPP-1795)
DNS
Add new setting dns_cache_clear_timeout and timer.
XML BROWSER
Added callbacks in IF conditions. (SCPP-1798)

8.4.14 Features

AUDIO
Volume change should also change the speaker (handsfree) path (snomPA1, snomPA1DP).
BOOT
Boot process was optimized to save system memory (snomMP, snom870, snom821).
ETH
Switch port properties can be adjusted now. Switch port status is shown on WebUI info page (snom870, snom821). (SCPP-1070)
PUI
The big clock is no longer a snom-sign anymore, but it is now entirely made up of images and comes in two styles: analog and digital (snom870).
Login wizard for OCS version now inquires the three OCS specific login settings, instead of just account and registrar (SCPP-1631).

8.4.13 Features

PUI
New Action-URL setting for what URL’s to call when a certain subscription notify arrives (see http://wiki.snom.com/Settings/action_received_subscr_notify_url).
Number of speed key digits are limited to 3. No entries higher then 999 are possible.

8.4.12 Features

No new features

8.4.11 Features

LID
Added IEEE 802.1X eap-md5 authentication (new settings ieee8021x_eap_md5_username and ieee8021x_eap_md5_password).

8.4.10 Features

LID
Added mechanism for sending a stream of DTMF(s) on mapped key or WUI page (snom821, snom870).
XPATH
Enhanced Xpath implementation, i.e. max/min/last are supported now.

8.4.9 Features

TR-69
Allow to update/download the parameter map via the WUI.

8.4.8 Features

No new features

8.4.7 Features

No new features

8.4.6 Features

No new features

8.4.5 Features

No new features

8.4.4 Features

IOPINs
Added mechanism and required settings for automatic turning off of pins based on timers (snomPA1,snomPA1DP).
TLS
Added Server Authentication.

8.4.3 Features

FKEY
XML definition allows to define a default-state that gets applied when a key is set up initially, see here.
XML definition now allows to define action-urls to be called on key-event, see here.
PUI
All springboard icons can now be repositioned or removed using settings idle_icon_01..15 (snom870).
Springboard can show free programmable function keys now (configured by XML-definitions in XML section <functionKeys>)(snom870).
Setting snom_clock_style set to <analog> by default (snom870).
The settings dkey_fkey1-4 are available now. They can be set like other pre-programmed function key settings, for example to "speed 1234". If they are set, they are fired instead of the original softkeys configured in the settings gui_fkey. (SCPP-1564)
KEYS
Keymapping may now be changed via settings in case a customer wants to reorder the plastic keys of our phones.
SETTINGS
Setting values like "!$(user_name)@$(user_host)" will be evaluated and replaced with the result of their setting values respectively. (SCPP-1534)
TR-69
Added new RPC Method: X_Snom_GetWebContent.
UPLOAD
Customization archives are reloaded after firmware update (snom370-VPN, snom820, snom870).

8.4.2 Features

FKEY
XML definition now allows to define a different dial target depending on the fkey-state, see action.
Added new setting show_clock, which removes date and time from idle screen, if disabled. (SCPP-1263)
Letter input via numpad now depends on selected language (defines which special characters to use) but may be overwritten by values of new settings chars_in_…case_on_0..9. (SCPP-528)
SIP
Added AOC via XML: aoc-d and aoc-e supported. (SCPP-1415)

8.4.1 Features

AUDIO
Added starting of Multicast Paging without PBX. Can be selected per fkey at the fkey webUI page. (SCPP-208)
Fixed audio reception when using OCS conferencing. (snom820)
Fixed casing speaker click sound whenever it was turned on. No more click (snom870). (SCPP-1376)
Allow to mute the ringing of an incoming call with the mute key or a mute function key. (SCPP-937)
DIALPLAN
Added identity parameter to the dialplan XML which allows to route numbers to a particular identity no matter which identity is currently selected. (SCPP-195, SCPP-1244)
DIRECTORY
Added multi-numbered directory entries and favorites directory (snom360, snom370, snom820), just like snom870. But snom360 and snom370 don’t store photos though.
Master-entries in internal directory may now define a nick-name.
Added new attribute number-type.
Provisioned tbooks entries now replace old records by the same index. If you don’t want this, do not provision an index. (SCPP-940)
Provisioned tbooks may now entirely replace current tbook (instead of just adding to it), just set attribute "complete" of the tbook-tree to "true". (SCPP-940)
DTMF
Speed dial now accepts a DTMF sequence that is played once the call has been established. (part of SCPP-194)
Pressing a speed dial function key with argument "number=incomplete" shows the number on the display for further editing rather then dialing it. (part of SCPP-194)
PUI
Added umlaut support. Can be used for better LDAP-search requests, but umlauts may now be used anywhere where you can enter a text (snom360, snom370, snom820, snom870, snomMP).
XML idle screen on snom370 can now define the statusbar position just like snom360 and snom820.
Now displaying used codec and SRTP (for secure connections) when one presses the message button during a call (snom820). (SCPP-300)
Now displaying codec used and SRTP (for secure connections) in party-details (snomMP). (SCPP-300)
Codec info on ?-key is now integrated into the GUI instead of destroying its design (snom370). (SCPP-300)
Added 5 party conference (snom820). (SCPP-852)
Increased usability of touch-interface by not mistaking slightly differing touch vs. release coordinates for Drag’nDrop. Assuming Press at initial coordinates instead (snom870).
Increased speed when rendering idle XML’s with lots of clock-images (snom820, snom870).
Password challenge will disappear automatically when identity registers successfully (eg. if password was provided via webUI). (SCPP-1339)
Saving (to restore after a reboot) the latest 5 call records of each: missed, received and dialed.
Setting menu is now defined by an XML file and processed by minibrowser. (SCPP-1293)
Two action-urls can be configured, for press and release of the key, respectively. (SCPP-1122)
Via the new setting user_admin_mode, you can hide users privacy (call lists, directory) from the administrator. (SCPP-1326)
Added setting ignore_missed_calls_on_busy that inhibits the phone to add an incoming call to the missed calls if the user is in dialing state and denies an incoming call.
Added setting to enable the ringtone while other calls are on hold. (SCPP-201)
Allow to edit numbers from the call histories before calling them. (SCPP-921)
Added new way of provisioning fkeys to represent subscribtion-notifies (see wiki?fkey).
LID
Added pin control functionality for the door phone through OB DTMF. Also added light blinking on voice activity for the door phone (snomPA1-DP).
NET
Added new setting ignore_dhcp_findings allowing to ignore certain DHCP findings. (SCPP-1179)
PROVISIONING
Cut provisioning retry counter from 20 down to 1.
SETTINGS
Activate reading of presence states from XML file. (SCPP-1078)
New upload types gui_xml_state_conference, gui_xml_state_details, gui_xml_state_holding, gui_xml_state_settings, gui_xml_addperson added to be able to provision XML-GUI files.
Removed global ringer setting ring_sound which is redundant and confusing as the ringer is taken from the line dependent setting user_ringer. (SCPP-1318)
SIP
Added support for NTLM V2 authentication, new setting use_NTLMv2 can be used to disable NTLM V2 authentication, but is enabled by default.
New setting suppress_sip_messages suppresses processing of SIP MESSAGE but replies with 200 OK if enabled.
UTILS
Increased speed on reading XML-files.
WEB
If set, use the hostname of the phone as the title for the web user interface pages. (SCPP-1366)
Added new action URL which is triggered when a phone receives an attended transfer. (SCPP-1037)
Added timezone for United Arab Emirates (Dubai). (SCPP-353)
Allowed to enter the new XML-describtion of fkeys via web interface as well.
Values in drop-down combo-boxes for fkey-types and key-events are now sorted alphabetically as well.
Left menu in the snom web UI is now configurable. Just put a comma separated list in two new settings leftnav_hidden_user and leftnav_hidden_admin for user and admin mode respectively.


Bugfix

8.4.20 Bugfix

PUI
CHANGED: Setting action_received_subscr_notify_url now discards repeated same notifies for better performance.
FIXED: Action URLs were causing a state change when current state uses minibrowser. (SCPP-2005)
FIXED: (snom300, snom320) Phone wasn’t showing display name (realname) in state idle. (SCPP-1991)
FIXED: Phone wasn’t showing local line index for LDAP lookup of incoming calls. (SCPP-1880)
FIXED: (snom360) Status line was sometimes showing overlapped text. (SCPP-1990)
FIXED: Phone was leaving settings menu when changing outgoing identity. (SCPP-1988)
Fixed: Fkey labels were not reset after exiting minibrowser. (SCPP-2009)
Fixed: The setting block_url_dialing no longer inhibits calling numbers that contain * or #.
LDAP
CHANGED: If predict_text is enabled, only the first six characters will be used for the LDAP lookup to avoid system overload. (SCPP-1996)
FIXED: Stutter keys were not shown during editing the search string. (SCPP-2004)
OCS
FIXED: Phone was sometimes rebooting/freezing when updating contact names.
VPN
CHANGED: Version of openvpn client updated to 2.1.2.

8.4.19 Bugfix

AUDIO
Fixed: (snom820, snom821) Knocking for 2nd incoming call while connected with 1st call wasn’t working properly. (SCPP-1962)
Fixed: Auto connect indication while using headset wasn’t working properly. (SCPP-1956)
PUI
Fixed: (snom300, snom320) It wasn’t possible to dial the first entry when entering internal directory followed by offhook. (SCPP-1901)
Fixed: (snom370) Device wasn’t showing record indication in state conference. (SCPP-1957)
Fixed: It wasn’t possible to escape the password inquiry when user tried to abort reset values in PUI settings menu. (SCPP-1971)
Fixed: Device was accepting wrongly line key events in state calling. (SCPP-1975)
Fixed: In state transfer the phone was changing wrongly the state after posting an action URL. (SCPP-1980)
Fixed: Phone was staying forever in state calling when an outgoing INVITE receives no response at all. (SCPP-1944)
Fixed: Parsing a non XML document with minibrowser could lead to an endless loop. (SCPP-1952)
Fixed: Device wasn’t handling line state on hold correctly when the corresponding line key was pressed. (SCPP-1849)
Fixed: (snom820, snom821) While device was in state connected an incoming call was knocking instead of ringing. (SCPP-1920)
Fixed: (snom300, snom320) Password editing was revealing set password. (SCPP-1930)
Fixed: Device wasn’t using full SIP URI for dialing out of call lists, when username isn’t numeric. (SCPP-1963)
Changed: (snom300, snom320) Only URI without timestamp is shown in call list, when it exceeds display width. (SCPP-1939)
Changed: Don’t use feature of opening local directory record in state holding. (SCPP-1897)
SETTINGS
Fixed: (snomPA1, snomPA1DP) Device was losing volume setting.
SIP
Fixed: Wasn’t using rport parameter in VIA when only the port has changed. (SCPP-1987)
UPDATE
Fixed: (snom821, snom870, snomVision, snomMP) Software Update using HTTPS scheme was not working. (SCPP-1966)
WEB
Fixed: Device was wrongly asking for credentials during logout instead of during login process. (SCPP-1655)
Fixed: Some query strings in the web interface were missing a hidden tag. (SCPP-1831)
Fixed: The setting block_url_dialing wasn’t working while using a webUI page to dial. (SCPP-1666)

8.4.18 Bugfix

AUDIO
Fixed: (snom870, snom821) Phones experienced occasional audio loss after CWI in PSTN calls. (SCPP-1912)
Fixed: (snom3xx) Phones had poor handsfree performance. Tuned handsfree mode with new audio coefficients.
PUI
Fixed: GUI wasn’t updating caller name when was changed through sip UPDATE message. (SCPP-1925)
Fixed: Calling conference server wasn’t working for all hard keys. (SCPP-1752)
Fixed: Canceling call forward while entering target wasn’t working properly. (SCPP-1906).
Fixed: (snom300) Canceling OCS call forward was different to other phone types. (SCPP-1916)
Fixed: Reset values called out of phone GUI wasn’t working. (SCPP-1915)
Fixed: Provisioning of internal directory wasn’t working properly. (SCPP-1923)
Fixed: When redirection after timeout got enabled, sending starcode wasn’t working. (SCPP-1935)
Fixed: (snom300, snom320) Password parts became visible when backspace key was pressed during editing. (SCPP-1930)
HEADSET
Fixed: Wireless Enhanced Headset (EHS) wasn’t working with old adapter box anymore. (SCPP-1864)
SIP
Fixed: Missing ACK for 487 cancel after long time ringing. (SCPP-1913)
Fixed: Metaswitch special RFC3264 handling needs setting sdp_version_check under Advanced→SIP→sdp version check disabled. (SCCP-1911)
Fixed: Phone wasn’t reregistering when it was ringing in parallel. (SCPP-1938)
Fixed: Phone got confused by comments in XML dialplan. (SCPP-1784).
TR-69
Changed: Filetype notation changed to X 000413 ParameterMap. Upload of param map implemented. (SCPP-1825)
UPDATE
Fixed: (snom8xx, snomMP) A regular software update using TFTP was sometimes aborted after 300 seconds.
WEB
Fixed: The texts regarding CLIP and CLIR at the prefs WUI page were wrong. (SCPP-1926)
Fixed: (snomMP) VLAN options ID and QOS weren’t shown at WUI page. (SCPP-1892)

8.4.17 Bugfix

AUDIO
Fixed: It was possible to generate very short dtmf tones, now they take at least 80 ms. (SCPP-1878)
Fixed: (snom870, snom821) An initial clipping of audio happened sometimes under certain scenarios
PUI
Changed: Handling of forward all for all programable keys unified. (SCPP-1811)
Changed: Immediatly save all settings upon logoff-all. (SCPP-1889)
Changed: (snomMP) XML IF tag handling updated to fix GUI problems. (SCPP-1828)
Changed: (snom300, snom320) Also show a forwarding hint even if identity depended forwarding is active. (SCPP-1817)
Fixed: If the hold key or line key was pressed to fast the phone sometimes mixed up the call states. (SCPP-1809).
Fixed: It wasn’t possible to dial an entry in a LDAP result set using the speaker key. (SCPP-1888)
Fixed: (snom3xx) 8.4.16 introduced a bug so that expansion modules and wireless headsets weren’t working. (SCPP-1871).
Fixed: XML Minibrowser based Alert messages weren’t always shown correctly, e.g. a failed transfer didn’t show the error message. (SCPP-1788)
Fixed: It was sometimes not possible to select an entry in a list (menu) when the list had more than 9 entries. (SCPP-1891)
Fixed: (snom8XX) Intercom wasn’t working properly when the idle screen was set to or showing the virtual keys. (SCPP-1832)
Fixed: It wasn’t possible to choose a number from the directory/LDAP out of the pool for transfer. (SCPP-1169)
Fixed: Auto dial wasn’t working when an entry of an LDAP result set was selected.
SETTINGS
Fixed: A "value=" somewhere in one of the settings lead to a read error under certain scenarios.
SIP
Fixed: Close call on missing ACK for final invite response. (SCPP-1819)
Fixed: Inhibiting rapid hold/unholds combinations to send 2nd invite before 1st one was answered. (SCPP-1809)
Fixed: VQReports weren’t always send directly to the collector. (SCPP-1884)
Fixed: Phone did’nt evaluate all call-info headers. (SCPP-1359)
TR-69
Fixed: Received settings weren’t saved to the flash immediately.
Changed: Handle pending informs to avoid multiple sessions. (SCPP-1827)
Changed: The ID of the upload envelope is no longer set statically to 100. (SCPP-1827)
WEB
Changed: The Action URL receiving Attended Transfer was renamed to received SIP INVITE to reflect its true meaning. (SCPP-1749)

8.4.16 Bugfix

PUI
Some menus were not showing proper entries, because XML compare for IF condition wasn’t working properly.
XML BROWSER
New main-tag attribute persistent lets the XML survive state changes. (SCPP-1807)
SIP
Do not alternate SDP body/version on incoming requests without SDP change. (SCPP-1805)
Inhibiting rapid hold/unholds combinations to send 2nd invite before 1st one was answered (SCPP-1809)

8.4.15 Bugfix

AUDIO
Fixed initial loudness on boot up when multicast was already streaming (snomPA1, snomPA1DP). (SCPP-1151)
ETH
PC Switch port was switched off when auto negotiation was selected. Fixed speed selection was working (snom3xx).
PUI
Disabled touch-buttons can’t be pressed anymore (snom870). (SCPP-1753)
Support-key works from within virtual pkey overview (snom820, snom821, snom870). (SCPP-1542)
Added softkey ok to confirm dialogs (snom320). (SCPP-1762)
Wireless Enhanced Headset was sometimes not in the correct state. (SCPP-1764)
Aborted transfer reconnect to previous call. (SCPP-1645)
Save webclient credentials in settings after challenge. (SCPP-1728)
Show correct time in call lists details (snom320). (SCPP-1761)
Refresh OCS presence in clock key state. (SCPP-1793)
Refresh OCS presence in virtual key state. (SCPP-1792)
CANCEL call on second press of the button (snomPA1DP).
Softkey OK will work in LDAP search. After key Backspace duplicate entries are removed. (SCPP-1783)
SIP
Fixed - No multicast after a sip call with srtp (snomPA1, snomPA1DP) .
Auto reconnect after transfer failure is optional now: added new setting sip_reconnect_on_rejected_refer. Shows an error message on failure. (SCPP-1776)
WEB
Support page shows informations about a possible core dump file (snom8xx). (SCPP-1687)

8.4.14 Bugfix

AUDIO
Conference mic mute fixed (snom870, snom821).
PUI
Cancelation of showing pickup dialog when monitoring multiple calls has been fixed. (SCPP-1729)
Pkeys described through XML can now be used in state transfer when choosing the target for a blind transfer.
SIP
Stick to the same SDP media offer on RFC 4028 timer based Reinvite. (SCPP-1751)

8.4.13 Bugfix

No Bugfixes

8.4.12 Bugfix

PUI
Phone menu fixed. Switching from admin to user mode works again.
AUDIO
If phone is offhook, audio device is now correctly set to handset when connecting a call.

8.4.11 Bugfix

PUI
Fixed: Retry Setting server with HTTP instead of HTTPS.
New setting number_simultaneous_calls sets the limit of maximum number of simultaneous calls. (SCPP-1701)
OCS call forward works now (snom870). (SCPP-1653)
Outgoing id and active line will be set to a valid value if the current value is obsolete. (SCPP-1702)
Softkey handling fixed (snomMP). (SCPP-1637)
XML SnomIPPhoneDirectory will work on 300/320 now. (SCPP-1716)
FKEY
Fixed phone freeze on invalid button index from LED control. (SCPP-1675)
SETTINGS
Copy defaults.xml onto config.xml during factory reset in order to give even the LID access to it. (SCPP-1709)
SIP
Added annexb=no for g729 in SDP.
TR-111
Was not working. (snomMP)

8.4.10 Bugfix

AUDIO
Fixed continuous DTMF problem when call was made with handset onhook (snom821, snom870).
Fixed one way audio problem in OCS conference (snom821, snom870). (SCPP-1654)
PUI
First found LDAP result from list wasn’t dialable (snom870). (SCPP-1623)
Pressing CANCEL (→F_ABORT) for a couple of seconds, will show system info out of initial GUI wizard menu. (SCPP-1652)
The setting disable_speaker works now. If the setting is enabled, the handset will be used for audio instead of the casing speaker. (SCPP-1628)
WEB
Fixed WUI access without credentials. (SCPP-1590)

8.4.9 Bugfix

AUDIO
Out of Band DTMF mechanism was improved for better detection of DTMF in remote IVR systems.
PUI
Abort (long pressed CANCEL) possible if phone asks for DHCP or IP-address. (SCPP-1586)
Call lists setup will be done with correct parameters. (SCPP-1612)
XML decoding for display names. (SCPP-1555)
Show contact details for the selected item. (SCPP-1635)
SIP
While sending feature codes (DND), calls got stuck. (SCPP-1573)
OPTIONS are accepted in a call now as well. (SCPP-1624)
(OCS) Disable ICE when no MRAS is configured.
(OCS) Ignore incoming ICE candidates when ICE is disabled.;TLS:Trust secure localhost connections by default.
TR-69
Fixed some more issues regarding Policy Chaining.
WEB
Added setting rtcp_xr to Advanced SIP WUI page.

8.4.8 Bugfix

AUDIO
(OCS) Fixed (OCS) audio loss problem after unhold (when the call was on for a long time).
PUI
Fixed Memory Leak in creation of data for the state_of_gui page. (SCPP-1626)
Memory leak with XML-menus. (SCPP-1613)
Traverse buddy list positioning fixed. XML encoding added. (SCPP-1594)
SIP
(OCS) Add ms-referee-uri param to Referred-By. (SCPP-1592)
(OCS) In case of a failed subscription the retry must use the original uri and not the uri out of the contact header. (SCPP-1591)

8.4.7 Bugfix

DNS
Faster dns failure detection and lookup (SCPP-1599)
RTCP
Fixed wrong ssrc from snomMP on RTCP Packets during Hold (SCPP-1611)
SIP
Fixed snomMP one way in a conference (OCS only) (SCPP-1536)

8.4.6 Bugfix

AUDIO
Added RTCP-XR Report, VQSessionReports, Registration Metrics (SCPP-1596)
PUI
New setting stutter_timeout defines the time gap between two stutter key press. (SCPP-1597)
Edit numbers out of call lists fixed on twoline displays. (SCPP-1602)
Preselection fixed after sorting listbox entries (Preferences) on 360. (SCPP-1481)
SIP
Messages after 70 seconds of ringing had not been acknowledged (SCPP-1598)
Added failover handling on certain SIP Responses
Added request timeout option;TLS:Allow to add and delete certs even if hidden tags are enabled
Disable TLS Server authentication when resetting the phone
TR-69
Invalid Policy Chaining implementation. Could cause some send_inform issues as well.
WEB
Web client requests may stay open in an authorization scenario (SCPP-1556)

8.4.5 Bugfix

WEBCLIENT
Force to send TR69 Requests no matter if the webclient waits for authentication credentials.

8.4.4 Bugfix

SIP
Fixed request timeout and failover handling for TCP/TLS.
Correct handling of rport param in VIA header. (SCPP-1398)
TFTP
Use only hostname for DNS query. (SCPP-1572)
UPDATE
VPN files were not properly transfered during update.

8.4.3 Bugfix

AUDIO
Added new setting auto_connect_indication_tone for customer defined values. (SCPP-1517)
Fixed inband DTMF (snomMP). (SCPP-1445)
Fixed RTP packet transmit counting. (SCPP-1337)
CSTA
Action URL must set the CSTA id in case of clearing a line. (SCPP-1488)
Disabled Flexor security token. Web authentication must work for CSTA as well. (SCPP-1559)
PUI
Fixed showing rx/tx packets during call enabled by pressing ? key (snom370). (SCPP-1473)
Clear display before displaying call stats (snom360). (SCPP-1473)
Touch redirect asks for a target if no target was set before (snom870). (SCPP-1483)
Enabled BLF and SPEED key behaviour even if second call comes in, when setting redirect_ringing is off. (SCPP-1503)
Disabled monitor key calls (snom320). It’s meant for graphical displays only. (SCPP-1561)
Don’t allow pressing softkeys if keyboard is locked (snom370, snom8xx). (SCPP-1487)
Fire action URL log off/on for every un-/register. New action variables added: context_url and reregister. (SCPP-1539)
Fixed going to conference after disconnecting a third single connection. (SCPP-1562)
Fixed wrong-colored pixels when loading external images (snom870). (SCPP-1544)
Fixed broken redial after doing a transfer. (SCPP-1553)
Fixed erraticly broken redial.
Force redraw for list elements in minibrowser (snom870). (SCPP-1469)
Added new setting logoff_all_no_confirm to disable logoff all confirmation dialog. (SCPP-1384)
Pressing blinking line key (of a second incoming call) in state edit number now connects the call. (SCPP-1563)
Pressing a line key leaves the conference now. (SCPP-1571)
Redirect for one identity but more than one target is possible now. (SCPP-1502)
Port used in URLs matches the scheme now (http - 80, http - 443). (SCPP-1551)
Setting block_url_dialing works now (snom300). (SCPP-1560)
Show incoming call identity on display (snom300, snom320). (SCPP-1568)
Show mute icon in state conference (snom370). (SCPP-1482)
Transfer (deflection) is allowed even if keyboard is locked. (SCPP-1487)
Transfer on hangup is also done now by pressing onhook button of wireless headset. (SCPP-1472)
LDAP
Incoming call query is done now even if number begins with country code. (SCPP-1547)
Query only when letter is entered completely. (SCPP-1454)
LID
Fixed buffer overflow protection. (SCPP-1545)
XML BROWSER
Speedkey handling fixed. (SCPP-1557)
Unused or redundant key defines removed. (SCPP-1498)
SIP
Fixed OCS Account Data Wizard issue. (SCPP-731)
UPDATE
Fixed URL parsing when port was given in URL (snom820, snom870, snomMP). (SCPP-1518)
WEBCLIENT
Do not cut HTTP Content-Length header if the atachment is empty.
Stop dangling web client request after timeout and allow just 64 open requests in parallel.
XCAP
Minimize polling of directory after failure due to to huge remote directory.
Reject directories that don’t fit the phone.

8.4.2 Bugfix

AUDIO
Knocking sound works now (snom870). (SCPP-1468)
Suppress DMTF during call deflection (snom870). (SCPP-1459)
CSTA
Empty callingDevice will use the current active line now. (SCPP-1427)
DIRECTORY
Fixed provisioning. (SCPP-1391)
Huge file uploads with watchdog enabled no longer restart the phone. (SCPP-1409)
PUI
Fixed a bug that added ghost characters behind the cursor when edited string contained several special characters (snom320).
Hebrew was not working in big font as well (snom370).
Fixed favorites title (snom870). (SCPP-1420)
Only every second OFFHOOK will change to edit number state if special idle screen is set (snom870). (SCPP-1393)
Fixed capital special character spacing. (SCPP-1436)
Language file retrieved via provisioning, wasn’t saved at flash fs anymore.
Making ONHOOK count when in virtual key state and wanting to cancel own outgoing call. (SCPP-1433)
Minibrowser text and menu rendering wasn’t working on twoline displays (snom300, snom320). (SCPP-1461)
Added new setting transfer_on_hangup_non_pots to have no POTS behaviour for using transfer on hangup. (SCPP-1451)
Setting dim_timer is available for all phones except snom360 now.
The outgoing identity will be changed if an identity is removed via menu and it was selected as the current ougoing line. (SCPP-1450)
Fixed error shown on minibrowser triggered settings save. (SCPP-1456)
Fixed case if XML menu is empty. (SCPP-1464)
Fetch an URL if set in SoftkeyItem tag. (SCPP-1478)
Up-/Down key will work in minibrowser as well (snom300, snom320). (SCPP-1477)
LID
DTMF tone duration increased for easy detection (snom870).
PROVISIONING
Increased provisioning retry counter from 1 to 5.
SETTINGS
Reregister failed if line settings were changed via provisioning. (SCPP-1462)
SIP
Don’t show anonymous if Privacy=id but P-Asserted-Identity is set. (SCPP-585)
Fixed negative expire timers after reregister and other subscription bugs. (SCPP-1430)
Added new setting sdp_version_check used for switching the DSP version check. (SCPP-1429)
No longer ignoring contact-field in subscription notifies. (SCPP-1431)
UPDATE
Create correct encoded proxy update URL (snom820, snom870, snomMP). (SCPP-1397)
Fixed auto-reboot on new firmware when idle state is not springboard (snom870). (SCPP-1434)
VLAN
Made sure that ethernet port VLAN un-/tagging is initialized once in bootloader and stays like it during the whole system is starting up. This is important for an PC connected to the 2nd switch port (PC port) in order to not disturb the network connection during the phone starts (snom300, snom320, snom360, snom370). Is available with u-Boot version 1.1.3-v.

8.4.1 Bugfix

AUDIO
Audio tuning for better quality (snom870).
If setting offhook_dial_prompt is off, speaker key is fixed in idle mode after off-/onhook. (SCPP-1371)
Fixed headset from ringing only once per incoming call to now every 3 seconds. (SCPP-416).
Going OFFHOOK with wireless headset will use preselection like handset. (SCPP-248)
Fixed Multicast feature (snom820, snom870). (SCPP-1075)
Added new setting mc_output_device to play PA media via speaker or headset. (SCPP-1264)
Switch to speaker after ONHOOK in states edit number or connected. (SCPP-988)
Fixed Auto Answer Indication (snomMP). (SCPP-1026)
Fixed multicast streaming (snomMP). (SCPP-1185)
Restore original media stream if REFER initiated INVITE failed. (SCPP-1288)
Fixed phone ringer silence on subsequent calls after using a non G.711 codec in a call (snom3xx).
Fixed OCS conference audio distortion (snom820). (SCPP-1373)
Fixed fluctuating ringer volume (snom870). (SCPP-1385)
DTMF send improvements (snomMP). (SCPP-1273)
When going to idle state, ONHOOK command is now send to headset as well. (SCPP-432)
WIFI
Added WIFI ethernet bridge, use your phone as a wifi client ethernet bridge (snom820, snom870).
Wifi Bridge feature is disabled by default to avoid unexpected interconnection between a different wired network and a wifi network.
CSTA
CSTA Response had an invalid syntax and generated warnings in XML DOM Parser. (SCPP-1370)
DFKS
DFKS Ring Count was limited to 21 as the broadsoft server refuses higher values. The limit is now only considered if broadsoft server type support is selected.
DHCP
Fixed handling of huge and infinitive lease times. (SCPP-1173)
DIALPLAN
Apply dial plan when dialing missed or received records that only consist out of an URL (without display name). (SCPP-1284)
DNS
Retry DNS resolving several times also during provisioning. (SCPP-1316)
DTMF
DTMF keytones while dialing were not working on snom8xx. Now they are working at least in handsfree mode. Currently, we cannot support playing them in speaker mode as well (SCPP-1159).
VOLUME down key interfered with a 1633 Hz DTMF tone.
Fixed inband DTMF (snom820). (SCPP-928)
PUI
Conference button was not correctly toggling conference on and off. (SCPP-1352)
Don’t cover wrong time and date anymore when NTP failed. Show system time in every case. (SCPP-1380)
Softkey transfer has same behaviour as transfer key. (SCPP-1394)
Added missing call release notification when a call had been terminated. Now release_sound distinguishes between on, off and off_when_terminating_calls. Replaced radio button with drop down on the webUI. (SCPP-1006)
Don’t dial last LDAP result if number has changed and no LDAP result was found (snom300, snom320). (SCPP-1120)
Fixed sticky photo bug (snom370). (SCPP-286)
Keys that used to work in idle state now work the same way in idle replacement state (snom870). (SCPP-1374)
On block_url_dialing enabled edit-mode button needs to be disabled (snom870).
Traitening edit modes: default numeric for dialing numbers and alpha for LDAP (snom870).
Removed memory leak when loading remote images (snom820, snom870). (SCPP-839)
Fixed transparency handling for idle-xml images (snom820, snom870).
Virtual key state now correctly colors keys defined as buttons (activity and pickup color) (snom820, snom870). (SCPP-804)
Virtual key state and 820-side-screen now use received labels for those keys defined as buttons (snom820, snom870). (SCPP-804)
Accept dial softkey even if the dial list has more then one entry. (SCPP-1390)
Accept incoming calls with line keys in state conference. (SCPP-1131)
Accept transfer key in state transfer. (SCPP-798)
Add URI to calling lists even if registrar contains parameter. (SCPP-1039)
After attended transfer display shows connected state instead of on hold state. (SCPP-1272)
Call forwarding set for a local identity will work with Asterisk now. (SCPP-1278)
Changed timezone for Korea from +8 to +9. (SCPP-1260)
Clean paint area for title (snom370). (SCPP-1191)
Close call stats dialog if call is incoming. No call stats shown in state conference. (SCPP-1105)
Configured function keys work now in every state, if not setup as Key Event. (SCPP-931)
Deletion of single sub-numbers of multi-number tbook record now possible. (SCPP-1192)
Don’t handle key event LOGOFF_ALL if a line is connected or on hold. (SCPP-1203)
Don’t process backspace if edit type is enum (sort options). (SCPP-1251)
Don’t send ring command if phone is already ringing. Even if there are more then one incoming calls. (SCPP-972)
Edit state fixed. Scrolling to left is possible now (snom320). (SCPP-1267)
Exit minibrowser when XML contains nothing useful to display. (SCPP-892)
Format date depends on length of the year (09 or 2009). (SCPP-1287)
Function Key LED’s did not work correctly with multiple Forward destinations. (SCPP-1348)
Handle the programmable keys in state settings as well. (SCPP-293)
Handle transfer hard key in state calling as well. (SCPP-1237)
Help page pointing to webUI now uses correct URL scheme and adds even the port if it differs from 80 (SCPP-1305).
When keyboard lock is on, reset number if a digit is entered that do not match to any emergeny number. (SCPP-1253)
When setting contrast via dummy webUI page, the contrast was not applied to the display. (SCPP-1377)
Indicate new voice-message via message-LED even during calls.
Long numbers fit now into display (snom360). (SCPP-843)
Navikeys actived for selecting entry out of LDAP search results in state edit numbers (snomMP). (SCPP-1145)
Digit input in idle state fixed. It’s possible to enter numbers or select an entry out of the add-menu with speeddial (snomMP). (SCPP-1216)
MWI changes to normal dialtone independently of GUI state. (SCPP-510)
Made directory details for call partner accessible in ringing and calling screens (press directory button). (SCPP-1310)
New handling for incoming calls during conference (snomMP). (SCPP-753)
Added new setting transfer_on_hangup_with_starcode to allow transfering calls on hangup if one call was picked up with PBX starcode. (SCPP-906)
Added new setting dialnumber_us_format to switch off the U.S. dialnumber format. (SCPP-620)
No blinking status line if MWI is on (mailbox message received). State MWI is now matching snomMP style. (SCPP-1027)
OCS: Contact list groups could not be switched (snomMP).(SCPP-1035)
Playing ringer on login page fixed. (SCPP-1386)
Fixed playing "Internal Ringer" set by preferences webpage if alert-info is set. (SCPP-1058)
Fixed playing ringer of current line from webUI. (SCPP-1019)
Pressing CANCEL key during number guessing will display the current input (snom300, snom320). (SCPP-1338)
Pressing Record+Voice key in conference state terminates the recording line. (SCPP-1220)
Changed CANCEL key behaviour when user is asked whether he wants to use DHCP or not. Instead of switching DHCP off, the user is jumping back to the main settings menu. (SCPP-1181)
Refresh display after changing setting "Text Only Display on Soft Keys". (SCPP-1301)
Refresh fkeys in idle XML screen. (SCPP-1280)
Refresh idle screen if idle XML url has changed. (SCPP-936)
Reset fkey setting for removed identity. (SCPP-442)
Send busy if CWI is off but not generally, if phone is in state conference. (SCPP-1276)
Setting Use Speaker Key to Receive Calls is valid for headset key too now. (SCPP-1154)
Show holding or held-by members in conference. (SCPP-1103)
Show call duration time (snom300, snom320). (SCPP-1138)
Corrected on screen positioning of SMS messages. (SCPP-557)
Show cursor in LDAP only during editing search string. (SCPP-670)
Transfer in state conference handled like in state connected. (SCPP-872)
Use solid background for softkeys if setting "Text Only Display on Soft Keys" is enabled. (SCPP-871)
Virtual key name lookup is working with full URIs. (SCPP-1094)
Added dimming timer (snom820). (SCPP-332)
OCS states now available for fkeys (in virtual key-view and 820 side screen). (SCPP-1177)
Phone crashed when one tries to pick up a second call with the speaker button.
Text scrolling wasn’t working properly (snom370). (SCPP-1060)
HTTP
Not accepting content that is so huge that it could crash the phone. (SCPP-891)
KERNEL
Solved cold boot/hang problem for snom3xx series. Cold boot may last now up to 4 minutes (worst case).
KEYS
Only subscribe to those keys, that are available (ignore subscriptions for keys on extension keypads that are not plugged in). (SCPP-716)
LDAP
Fixing first-digit LDAP lookup. (SCPP-1041)
If no LDAP result entry was selected and dialing is started, phone shows enter number prompt. (SCPP-1306)
LED
Fixed indexing of buttons. (SCPP-804)
LID
Improved performance on high network load. (SCPP-1228)
RTCP
BYE is now encrypted if in SRTCP. Also fixed BYE length. (SCPP-1333)
Fixed RTCP in conference mode (including SRTCP). (SCPP-1311)
SETTINGS
If the provisioning location was specified without scheme, skip the generated HTTP urls if one of the generated TFTP urls were successful. (SCPP-1008)
It is not possible anymore to provision the setting firmware_version. (SCPP-845)
Make reregister after check-sync if necessary. (SCPP-985)
Removed G.723 codec from default initialization (snom820 OCS edition).
Made sure that the setting value of ntp_refresh_timer is set between 60 seconds and max signed int, which is around 9 hours.
Setting time_24_format defaults to on now. (SCPP-1343)
SIP
Inband DTMF to IVR failed (snom820). (SCPP-1150)
Apply dialplan on received/missed calls. (SCPP-141)
Switch to edit number state if we got a 484 INCOMPLETE during overlap dialing. (SCPP-950)
Added hold inactive/sendonly option. (SCPP-812)
Added optional Outbound support. (SCPP-1079)
SDP Session-Attribute "a=" was not handled.
Device Feature Key Sync did not correctly handle Forward Events.
Discard 401 challenge to REGISTER if call id is unknown.
Do not get any stats for connections without RTP stream, e.g. MoH delivery. (SCPP-1357)
Filter invalid packets no matter if they have a known Call-ID or not. (SCPP-1368)
Fixing crash when unholding a party which we had connected to a MOH-Server. (SCPP-1350)
Incorrect time stamp was causing NTLM V2 authentication to fail on older servers.
OCS: Limit number of presence subscriptions to those displayed or on a key.
OCS: Presence subscription was not refreshed when contact list changed.
OCS: Don’t make the STUN address the default when the server indicates the client is remote.
OCS: Don’t send any SUBSCRIBE or SERVICE requests while NTLM negotiation is in progress.
OCS: ICE negotiation blocks early media. (SCPP-1016)
OCS: Stale SA causes phone to lose registration. (SCPP-1160)
OCS: When an local relay ICE candidate becomes "received valid" activate it only after connectivity check completes.
OCS: Reregister as soon as SA expires.
OCS: Reset the TCP connection when the SA expires and reregister immediately.
RE diaplan: Back reference to non-existing group "from" sometimes produced junk because captured groups were not cleared.
Send another ACK if we receive a second 2xx. (SCPP-832)
Unregister sets unregistered identity to inactive. (SCPP-599)
As-feature-event re-subcriptions sometimes had a non-empty body.
Fixed handling of ringing/knocking call if all conference members hook on. (SCPP-552)
Fixed missing Eventlist Resubscribe on Notify indicating Subscription Terminated from Broadsoft. (SCPP-601)
Fixed session timer refresh with SIP Update method. (SCPP-1219)
Message retrieve was not properly working with 3CX. (SCPP-1307)
On register responses select own contact with the help of optional instance ids. (SCPP-1247)
Fixed hanging when SDP contains g.726 codec (snomMP). (SCPP-1356)
Update called party id depending on P-Asserted-Identity header on SIP responses. (SCPP-1189)
Use display name of P-Asserted-Identity header uri’s on SIP responses. (SCPP-1189)
Use only first Register Response and ignore follow up responses. (SCPP-1134)
When an INVITE had been send out and a connection was established before (e.g. start hold) the DTMF payload type was used from the old connection. Now, the payload type is taken from the settings.
TFTP
TFTP client supports now subdirectories. (SCPP-477)
TLS
The webclient re-initiates an handshake when handling a challenge. It will never try to reuse an existing connection anymore.
TR-69
Action GetParameterValues on Device. failed (snom300).
VLAN
Switched based port tagging was not working (snom820). (SCPP-1148)
VPN
Fixed (snom870, snomMP).
Fixed crash on denying incoming call. (SCPP-163)
WEB
Web page Trusted Certificates removed. Was obsolete anyway. (SCPP-1129)
Key event retrieve can be set to fkey now (snom300). (SCPP-1221)
Don’t ask for password during logout. (SCPP-1277)
Fixed switching between drop-down combo-box and plain text-field for pkeys (snom8xx).
Some early log messages were missing, as the loglevel was set to late.
Some setting changes were effecting other settings even though they were not been changed by the user. (SCPP-1123)
Fixed showing pictures from persons that have special characters in their name. (SCPP-1334)
Now setable again via webpage (was lost): "keyevent F_CONFERENCE:meineconfURI@confserver.com" (SCPP-1266)
XCAP
Synchronization now ignores obvious dummy sip numbers. (SCPP-1388)
Personal tools
Interoperability