Firmware/V8/Release Notes/8.7.5.8/Changes

From Snom User Wiki

Jump to: navigation, search

8.7.5.8 Changes

PUI
SCPP-4838: Default value for setting always_show_active_call changed to on since this the expected behaviour in most scenarios
SCPP-3632: 870 UI Changes according Spec for all Non-Idle Screens
SCPP-4410: Phone supports partial lookups using the last n digits of a number for incoming and outgoing calls
SCPP-4453: Transfer successful message not shown by default any longer. The behaviour can be changed via new setting seconds_to_show_transfer_success_for
AUDIO
SCPP-4782: Support for Line Flash DTMF event. New codec names available in codec_priority_list:
  • telephone-event-no-fmtp: no fmtp attribute is offered in SDP
  • telephone-event-0-16: fmtp 0-16 is offered in SDP, which enables the use of DTMF line flash
SCPP-4910: phone models snom 3xx, 820 and 710 are now supporting codec strings g729-annexb=yes and g729-no-fmtp in codec_priority_list
SIP
SCPP-5066: reintroduce old behaviour from 8.4.x: although record_missed_calls is disabled action_missed_url has to be fired
SCPP-5029: Incorrect REFER causes server based conference to fail with 3CX
SCPP-4812: G729 codec choice incorrectly includes annexb=no in SDP
  • New codec name g729-annexb=yes available in codec_priority list Under -> Setup -> Identity -> RTP ->Codec
WUI
SCPP-3791: Moved setting publish_presence from Advanced/SIP/RTP to Identity/SIP
PROVISIONING
SCPP-5070: Provisioning sometimes does not work when the network uses STP and static IPs for the phones.
  • Status message now shows ETA of max provisioning duration (calculated on the duration of the first attempt) respectively.
Personal tools
Interoperability