Firmware/V8/Release Notes/

From Snom User Wiki

Jump to: navigation, search Bugfixes

SCPP-4598: Phone looses memory when changing volume
SCPP-4591: One way audio after selecting one conference participant and pressing OK in a 4/5-part conference (snom 720/760 only)
SCPP-4544: no ringing on speaker when a 2nd incoming call is waiting and the 1st call is terminated by going on-hook
SCPP-4514: alphanumeric characters not being sent in DTMF keys
SCPP-4512: Pickup indication with function key configured as extension does not work
SCPP-4485: Crash with asterisk 1.8
SCPP-4477: no Audio can be heard when receiving Intercom/Push2talk calls and Type of Intercom Answering is set to Handsfree (snom PA1 only)
SCPP-4431: Inband DTMF for FLASH doesn't work on 7xx Series
SCPP-4415: no audio in a 4-part conference after selecting the first participant and pressing OK (snom 710 only)
SCPP-4345: Dialtone during hold is missing after answering an incoming call from handset
SCPP-4340: DTMF tones aren't sent while showing a mini browser image on the phone display (i.e. images from a Baudisch camera)
SCPP-4335: Starcode INVITE mistakenly establishes call with audio
SCPP-3735: phone doesn't play ring tone after a conference call
SCPP-3307: Transferring the same phone two times results in one-way b-channel with Teles
SCPP-2830: Multicast Paging: Can't switch between speaker/handset during an active multicast on the destination site
SCPP-1857: audio delay with outgoing calls affecting snom 821/870
SCPP-3382: Multicast paging not working when assigned to soft key
SCPP-4417: on rejection of SIP hold request the call cannot be retrieved/hold/released any more
SCPP-4281: One-way audio for T-com users because of double codec in SIP
SCPP-4434: BargeIn/Notify freeze and ignored CANCEL request (QSC)
SCPP-3476: %23(encoding for #) in CSTA:calledDirectoryNumber is ignored in outgoing SIP-INVITE if csta_legacy_control = 0
SCPP-2089: DTMF RTP event sent even though user_dtmf_info is set to sip_info_only (snom 821/870 only)
SCPP-4579: After many transfers to the same number, each with different unique "Refer-To:" URI, the phone becomes slow
SCPP-4539: Basic Call is immediately put on HOLD when the call is accepted
SCPP-4508: Extension monitoring not working after transfer due to REFER being sent to C instead of A
SCPP-4498: In header "WWW-Contact" include not a valid URL of the phone
SCPP-4438: When contact URI is set to anonymous@anonymous.invalid the phone does not show the display name on incoming calls (instead "unknown" is displayed)
SCPP-4024: Phone sends 486 Busy after 302 Moved Temporarily
SCPP-3731: phone doesn't change Caller-ID after transfer (from-change according to RFC 4916)
SCPP-4463: DFKS not working with all server profiles
SCPP-4364: snom Meeting Point crashes when answering the call
SCPP-4503: ACD user interface corrections
SCPP-4492: setting conferencing doesn't work for phones using joined call-screen
SCPP-4435: display_method has no effect on caller lists
SCPP-4430: Idle state can't be reached by pressing cancel after unplugging ethernet cable in "Help" state
SCPP-4426: pressing the "Cancel" key may not function properly while in Time zone, Language or Tone Scheme sub menu
SCPP-3916: Call LED keeps flashing and the number of missed calls stays in idle screen all the time
SCPP-4456: Park+Orbit soft key appears when handset is used (snom 370 only)
SCPP-4354: snom 760 shows dialled calls as unknown but also with the correct call ID when using caller pictures
SCPP-4512: Pickup indication with function key configured as extension does not work
SCPP-4554: Broadsoft XML definitions have no effect on snom Vision in different phone states
SCPP-4509: Back light turns on unexpectedly
SCPP-4573: Transfer of picked up call not working using key type extension and transfer destination = monitored extension
SCPP-4406: keyboard_lock_accepted_keys should have general effect, not just in a call
SCPP-2966: Virtual keys are not signalling a call in Park+Orbit (snom 870 only)
SCPP-4416: Destination Caller ID not displayed when call initiated through function key (type extension) and caller ID is containing alphanumeric characters
SCPP-4423: Not possible to access virtual keys on transfer screen (snom870 only)
SCPP-4499: Click To Call failed
SCPP-4441: "Play ringer" button does not work
SCPP-4532: Call forwarding with two identities does not work correctly
SCPP-4552: @IP for Extension Monitoring Call Pickup List URI is not added automatically in the SUBSCRIBE packet as it was in the past
SCPP-4306: Bluetooth Headset on snom 7xx doesn't work properly
SCPP-4181: Wireless headset doesn't work properly. Audio is played via handset instead of headset and call is disconnected just press the headset button twice.
SCPP-2674: After upgrade from firmware version 7 VLAN settings get lost
SCPP-4551: Wrong file name requested when using provisioning with DHCP option 67 (snom[XXX].xml-[MAC] instead of snom[XXX]-[MAC].xml)
SCPP-4237: TR69 param_map cannot be loaded when auto_reboot_on_setting_change is enabled and thus phone is rebooting
SCPP-4420: provisioning of codec_priority_list not working correctly when permission flag is set
SCPP-4494: Uploading license file doesn't work in case of a setting change reboot
SCPP-4521: dial plan change via TR69 must be applied without reboot
SCPP-4577: Phone resets the TIME-stamp to 0, but don't set the MARKER-bit
SCPP-4529: HTTP 200 OK response of HTTP CSTA requests includes 2 CRLF after the 200 OK instead of 1 CRLF
SCPP-4474: Malformed CSTA transferedEvent:
SCPP-4425: Action URL for missed calls will be executed even if the call has been answered somewhere else
SCPP-4427: Enabled Filter Packets from Registrar can by bypassed with IP call and remote control via CSTA is possible
SCPP-4487: Key presses will show up in log output of the phone if GBR or USA tone scheme is used
SCPP-4439: settings URL http://<ip>/settings.cfg can not be fetched when the phone is in user mode and the correct admin password is used.
SCPP-4432: XML Idle Screen loaded incompletely or incorrectly on reboot
SCPP-4541: After multiple queries phone does not send lookup requests any longer
SCPP-4530: If country and area codes are set and 0 is called, the phone looks up COUNTRY* in LDAP and stores all the results in one contact entry
SCPP-4505: no lookup of number to LDAP contact of incoming call or dial number
Personal tools