Firmware/V8/Release Notes/8.2.25

From Snom User Wiki

Jump to: navigation, search



8.2.25 features

XML definition now allows to define a different dial target depending on the fkey-state, see this article.
Added new setting show_clock, which removes date and time from idle screen, if disabled. (SCPP-1263)
Timezone setup wizard now starts out with reduced list of timezones that match the choosen language (snom360, snom820, snomMP).
Letter input via numpad now depends on selected language (defines which special characters to use) but may be overwritten by values of new settings chars_in_…case_on_0..9. (SCPP-528)
Password challenge will disappear automatically when identity registers successfully (eg. if password was provided via WUI). (SCPP-1339)
If set, use the hostname of the phone as the title for the web user interface pages. (SCPP-1366)
Added new action URL which is triggered when a phone receives an attended transfer. (SCPP-1037)
Synchronization now ignores obvious dummy SIP numbers. (SCPP-1388)


If setting offhook_dial_prompt is off, speaker key is fixed in idle mode after off-/onhook. (SCPP-1371)
Suppress DMTF during call deflection. (SCPP-1459)
Fixed OCS conference audio distortion (snom820). (SCPP-1373)
The CSTA Response message had an invalid syntax and generated warnings in XML DOM Parser. (SCPP-1370)
Empty calling device will use the current active line now. (SCPP-1427)
A lease time above 29bit (ca. 17 years) is treated as infinity.
Conference button was not correctly toggling conference on and off. (SCPP-1352)
Don’t cover wrong time and date anymore when NTP failed. Show system time in every case. (SCPP-1380)
Fixed a bug that added ghost characters behind the cursor when edited string contained several special characters (snom320).
Hebrew was not working in big font as well (snom370).
Fixing OFFHOOK when in virtual key state (snom820).
Fixing capital special character spacing. (SCPP-1436)
Fixing letter input for dialing when coming from directory. (SCPP-1435)
Help page pointing to web user interface now uses correct URL scheme and adds even the port if differs from 80 (SCPP-1305).
Setting contrast via dummy web userinterface page, the contrast was not applied to the display. (SCPP-1377)
Making ONHOOK count when in virtual key state and wanting to cancel own outgoing call. (SCPP-1433)
Minibrowser text and menu rendering wasn’t working on two line displays (snom300, snom320). (SCPP-1461)
Fixed error shown on minibrowser triggered settings save. (SCPP-1456)
Added new setting transfer_on_hangup_non_pots to have no POTS behavior for using transfer on hangup. (SCPP-1451)
No longer ignoring ONHOOK when showing virtual keys. (SCPP-1361)
Playing ringer on login page fixed. (SCPP-1386)
Setting dim_timer is available for all phones except snom360 now.
The outgoing identity will be changed if an identity will be removed in phonemenu and it was selected as the current ougoing line. (SCPP-1450)
Fetch an URL if set in SoftkeyItem tag. (SCPP-1478)
Up-/Down key will work in minibrowser as well (snom300, snom320). (SCPP-1477)
Fixing displaying of hebrew characters. (SCPP-1442)
Made sure that ethernet port VLAN un-/tagging is initialized once in bootloader and stays like it while the whole system is starting up. This is important for a PC connected to the 2nd switch port (PC port) in order to not disturb the network connection while the phone starts (snom300, snom320, snom360, snom370). Is available with u-Boot version 1.1.3-v.
Increased provisioning retry counter from 1 to 5.
BYE is now encrypted if in SRTCP. Also fixed BYE length. (SCPP-1333)
Fixed RTCP in conference mode (including SRTCP). (SCPP-1311)
It is not possible anymore to provision the setting firmware_version. (SCPP-845)
Reregister was failing if line settings were changed in background via provisioning. (SCPP-1462)
Made sure that the setting value of ntp_refresh_timer is set between 60 seconds and max signed int, which is around 9 hours.
Setting time_24_format defaults to on now. (SCPP-1343)
Apply dialplan on reveived/missed calls. (SCPP-141)
Added hold inactive/sendonly option. (SCPP-812)
Do not get any stats for connections without RTP stream, e.g. MoH delivery. (SCPP-1357)
Don’t show anonymous if Privacy=id but P-Asserted-Identity is set. (SCPP-585)
Filter invalid packets no matter if they have a known Call-ID or not. (SCPP-1368)
Fixed negative expire timers after reregister and other subscription bugs. (SCPP-1430)
Fixing crash when unholding a party which we had connected to a MOH-Server. (SCPP-1350)
Added new setting sdp_version_check used for switching the DSP version check. (SCPP-1429)
No longer ignoring contact-field in subscription notifies. (SCPP-1431)
SDP Session-Attribute "a=" was not handled.
Send another ACK if we receive a second 2xx. (SCPP-832)
Fixed missing Eventlist Resubscribe on Notify indicating Subscription Terminated from Broadsoft. (SCPP-601)
Limiting space available for sort-criteria so that one sees which number will be dialed (snom300, snom320). (SCPP-1363)
Showing best string to identify an identity (eg. the display name) instead of (Identity 1, …) (snom300, snom320). (SCPP-1363)
Changing of sort order works again. (SCPP-1363)
Fixed nick name handling when adding a sub number to a single entry. (SCPP-1388)
Fixed that multi numbered records always claimed to have active identity set. (SCPP-1363)
Fixing provisioning. (SCPP-1391)
Huge file uploads with watchdog enabled no longer restart the phone. (SCPP-1409)
Removed bug that caused XCAP XML to loose contacts. (SCPP-1388)
Stop temporary creation of locally deleted directory records when they are found in XML from XCAP server. (SCPP-1388)
Action GetParameterValues on Device. failed (snom300).
Create correct encoded proxy update URL (snom820, snomMP). (SCPP-1397)
Fixed showing photos from persons that have special characters in their name. (SCPP-1334)
Personal tools