Firmware/V8/PA1

From Snom User Wiki

Jump to: navigation, search
  1. Check the feature list of Version 8.7.5.35 carefully!
  2. Check the release notes for version 8.7.5.35 carefully!
  3. Check the change log for firmware branch 8.X carefully!
  4. Check the Known Issues section for 8.7.5.35 carefully!
  5. Perform the update from V8.X to Version 8.7.5.35 following the steps below:


Right-click on the following link and choose Copy shortcut:

Open the Web User Interface and navigate to the Software Update page

Paste the link into the Firmware field

Web User Interface -> Software Update -> Firmware

Press Load

--> The PA1 starts to reboot. The red LED will light up, the green LED will goout. The firmware update is done when both LEDs start to blink.

Note: Do not disconnect the power at anytime!

Check you firmware version afterwards

Personal tools
Interoperability