Firmware/V7/Release Notes/Change Log V7.1

From Snom User Wiki

Jump to: navigation, search

Change Log between V7.1 and V6

Features
  • No Features
7.1.38
  • Added new action release to clear previously seized button line.
7.1.37
  • Added Generic Intercom Button feature. If programmable fkey is set to Intercom without a target number, user gets asked for the target before intercom call starts.
7.1.36
  • added timer driven settings refresh from server (new setting settings_refresh_timer)
  • enhanced Russian translation
  • do not show empty dialog subscription screen for 3 seconds anymore
  • setting pickup_indication is available again for big display phones (snom360/snom370)
  • changed default redirect edit mode from alphabetic to numeric (SCPP-120)**
  • a logging entry is created if an action url could not be accessed (SCPP-146)
  • split USA-10 timezone into 2 timzones to distinguish between hawaii and aleutian islands (new timezone is USA2-10 which has DST in contrast to USA-10 which has not)
  • added unused option to the drop down menu of the timezone setting at the advanced network WEB page (So you can set timezone to empty and read only and it's not showing a specific timezone but unused.)
  • added client certificate presentation (webserver_cert also used as client certificate)
7.1.35
  • WWW-Contact was no longer being generated
7.1.34
  • new setting offhook dial prompt controls if dial prompt is offered on Offhook (on by default)
  • duration display for a connected call on (snom370) is hh:mm:ss
  • show IVR dtmf on display during connected state (snom370)
  • consistent behavior for incoming calls in menu states
  • unicode characters are displayed properly in title line and soft key texts on (snom360)
  • programmable keys 6 and up were blinking at a lower frequency on incoming calls
  • block programmable keys while Broadsoft-style shared line is seized
  • added additional functionality for fkey type key event; F_TRANSFER:700 would transfer the connected call to destination i.e. 700 (not the incoming call)
  • added setting show diversion to control display of Diversion header info
  • added settings subscription delay, terminate subscribers on reboot and functionality (taken from v6.5)
  • added replaces for alerting call
  • suppress individual dialog subscriptions when eventlist when eventlist is on (Broadsoft)
  • write the DHCP hostname only if there is enough space
  • help link of user q corrected
7.1.33
  • support blind transfer using buttons (using the Buttons programmable key type, single step blind transfer is possible now by just hitting transfer and the appropriate button with action type invite)
  • dual audio and handsfree support on conference (snom370) (+Spkr to add a secondary audio device during conference is available now)
  • use status LED for conference and transfer operation (snom370) (the big LED on top of display shows activity in the said states now)
  • PUBLISH based directory search now supports list of matches (consistent with LDAP directory search results, PUBLISH returned lists are also shown)
  • support DND control through buttons (a DND operation through Buttons programmable key type turns indication on/off on display)
  • call acceptance is dependent on speaker receive call (this new configuration parameter controls if pressing the speaker key can accept a ringing call or not)
  • new configuration parameter global missed counter to track missed calls (this new configuration parameter is to allow backward compatibility to old behavior when missed calls on all SIP lines were counted together)
  • enabled directory search during a call (to help make a second call e.g. for transfer even during a call)
  • Call Pickup through buttons linked to calls state (snom360/snom370) (in the Calls window, pickup is now possible as in dialog state through information gathered from Buttons programmable key type feature)
  • remove ringing calls from list of possible transferees (to make transfer operation more user friendly and avoid unintended transfers by mistake)
  • use soft transfer key only for deflection of ringing call (to have a consistent transfer mechanism, soft key appears only for deflection now)
  • showing display name in call monitoring state controlled by configuration parameter show name dialog (snom360/snom370) (in call monitoring state it is useful to show names if possible instead of numbers of the calls in progress. The new configuration parameter controls this feature. The naming format is the same as set by display method configuration parameter)
  • added new configuration parameter naptr sip uri to convert SIP URI's of the active line using RE Dial Plan for call lists (it's meant to rewrite incoming SIP URI's to be properly formatted for potentially following outgoing calls using that URI from the call lists. Default value is off.)
  • programmable key Active/Line combination receives a ringing call only on original key (to allow making a new call on another programmable key even if there is an incoming call on the first line)
  • option for backlight to completely turn off, blink or dim (snom370) (some users want to turn off the backlight completely after a call is done. All combinations are now possible on snom370)
  • display of audio icons solely dependent on configuration parameter audio device indicator
  • new configuration parameter auto reboot on setting change to enable new auto reboot feature but preserve old behaviour if needed; IMPORTANT: this configuration parameter takes effect on the configuration parameters following it in the setting file only, so if you like to have it effect all configuration parameters in the configuration parameter file, put it at the top of the file! If you experience a constanly rebooting phone set the log level to 7 and see (via syslog server) which configuration parameter causes the loop. (the auto reboot functionality has been included initially into 7.1.33 RC2)
  • show HTTP/Admin password warning on display (snom360/snom370)
  • context- sensitive function keys for Mute/Unmute are not hidden when configuration parameter redundant fkeys is off
  • LDAP/Directory Search list dials selected contact on handset offhook
  • F_LOGON_USER can be used on all phones for Hot Desking (log on/log off user accounts)
  • F_LOGOFF_ALL prompts log on wizard if logon wizard configuration parameter is on
  • Disabled 5 sec. lock on Shared Line key for Broadsoft/MetaSwitch as this is handled by line seize throttling mechanism
  • added protection against brute force attack to find out the HTTP password (more than three unsuccessfull login attempts will block the Web User Interface (WUI) for 1 minute; further groups of three unsuccessfull logins will double the blocking time respectively)
  • show warning message if Web User Interface (WUI) isn't secured by admin- and HTTP user password (show a warning hint at the upper right hand corner)
  • html encode Web User Interface (WUI) pages to prevent XSS attacks (this prevents injected (java-)script code to be executed)
  • new configuration parameter use hidden tags to protect the phone against XSRF attacks (because with each new Web User Interface (WUI) page a new hidden security tag is provided only the authenticated user is able to use the Web User Interface (WUI). Faked HTTP POST requests will not work anymore. With use hidden tags enabled you can do a distinct subset of GET requests with parameters only which are needed for the normal usage of the Web User Interface (WUI) (no direct dialing, no remote control is available if enabled. The mentioned functionality only works if the Web User Interface (WUI) is secured via non default admin- and HTTP passwords!)
  • added button to logout an already authenticated session (a missing opportunity has been added to logoff an authenticated user from the Web User Interface (WUI) page; this button will be displayed in the upper right hand corner only if the Web User Interface (WUI) is secured via non default admin- and HTTP passwords!)
  • added initial security advice Web User Interface (WUI) page (a new security advice Web User Interface (WUI) page has been added which will be shown once initially on restart)
  • new warning message and security advice page can be switched off via new configuration parameter ignore security warning (this has been added for backward compatibility reasons)
  • identity based configuration parameter user expiry can be adjusted in seconds now (via Web User Interface (WUI) you can change the value to your needs without using the previous dropdown presets anymore)
  • added new function key type BLF which is a mix of the Extension and Speed Dial. (The LED is controlled by the dialog state like in the Extension mode, while the key is controlled by the Speed Dial nature. In other words, no matter what the LED is doing, pushing that button will always dial the speed dial number. If you set it to something like *7123, then this button will always pick up the call for 123.) See this description for further details on BLF
  • removed audio device indicator configuration parameter from Advanced Behaviour page, it is available at page Advanced Audio anyway
  • using new encoding format in XML configuration parameter files, denoted by an additional attribute in the tree name (e="2") (from now on a proper HTML encoding is used; downgrading to older versions will make special chars appear wrongly!)
  • show secret configuration parameter values only as asterisks in log
  • show url loading update for redial list (if the list is taking longer than usual, some display update for loading activity shows the phone is processing the list)
  • added pn flag for input, to switch directly to the numeric input mode
  • fixed soft key update problem
  • rework of SnomIPPhoneText, better line breaking and <br/> tag support (it is recommended to use <br/> now instead of <br>, because the softkeys are not working with <br>)
  • added new {index} parameter for SoftKeyItem (The index parameter is the linenumber in a Minibrowser list. e.g. HTTP://192.168.0.55/index.XML?idx={index})
  • allow Minibrowser Action URL called from any Phone User Interface (PUI) state
  • History-Info display is controlled by new configuration parameter show history info (this information is processed by the phone but shown on the display if configuration parameter is turned on)
  • when SRTP is optional, offer both RTP/AVP without crypto and RTP/SAVP with crypto attribute (this is a way to indicate that SRTP is preferred, but not mandatory; controlled by new configuration parameter user savp)
  • added new option sip_info_only for configuration parameter user dtmf info, either as mutually exclusive with ib or oob dtmf or together with either of them (dtmf via INFO can be sent in addition to in/ob dtmf now, IMPORTANT: THE DEFAULT BEHAVIOUR HAS CHANGED!)
  • call completion subscription default expiry value is set down to 60 sec from before 3600 sec
  • hold/retrieve was not working in some scenarios
  • TLS ROC fix (after a couple of minutes one way audio occured)
  • 200 OK without SDP is ok when SDP was received in earlier message
  • added new language Catalan
  • reviewed Phone User Interface (PUI) text translations (especially the translations for FR, IT, NL, DK, SW, NO, SP have been improved)
  • added DST for Perth/Australia
  • DST changes for Australia
  • DST changes for New Zealand
  • added different room types (new configuration parameter handsfree mode) for handsfree mode: quiet, normal, echoic (different DSP coefficient presets for different room types have been added to enhance hands free audio quality in different environments)
  • start storing empty responses in DNS cache after basic Mass Deployment is done (not working DNS lookups because of blocked switch ports are not configuration parameter non resolvable FQHN anymore on the black list)
  • gracefully restart if DHCP server isn't reachable anymore (according to the RFC we added a new timer T2 which will restart the phone if it has been elapsed to 7/8; thus the phone will begin broadcasting again for a new DHCP server)
  • added completely turning off of light gradually apart from dim (snom370) (Some people complained that the snom370 light does not completely turn off when the light configuration parameter use backlight: is set to on on Preferences Web User Interface (WUI) page. Now, it slowly fades and turns off competely with the on configuration parameter (default). The previous behaviour has also been preserved where the light fades slowly and remains dimly lit without completely turning off. That configuration parameter option is now called dim.)
  • Spanning Tree Protocol (STP) packets are now forwarded from the LAN to the PC ethernet port (Managable switches supporting STP can now detect network loops.)
7.1.32
  • support special characters on Idle Screen (ÀÁÂÃÄÅÈÉÊËÌÍÎÏÒÓÔÕÙÚÛÜ) (snom360)
  • support active user and active host in Action URLs (in order to send relevant information during a call)
  • space separated concatenated status line messages (snom360/snom370) (for better readability)
  • added support for BroadWorks flash-based services (applicable to Broadworks server only)
  • Action URL request response does not disturb user operations anymore (display update after the response is received was disturbing the active calls)
  • added support for new tags <fetch>, <Label>, <br> and clearlight attribute for the <SnomIPPhoneDirectory> tag
  • added timezones for Venezuela and New Caledonia
  • language file retrieved via Mass Deployment replaces old one on flash (the provisioned language file is now stored on the local flash)
7.1.31
  • line based missed call counter (missed calls can be counted independently for each SIP line on the phone)
  • handle advanced wireless headset scenarios (call making, acceptance, cancellation can be handled by wireless headset)
  • Missed-Calls-Message header handled for all server types
7.1.30
  • added Austrian tone scheme
  • support wild card * Dial Plan match without any rewrite
  • volume keys change speaker volume in dual-audio mode
  • do not ask for DHCP server if IP gateway and DNS server are not set (phone may work even if IP gateway and DNS server aren't set, which wasn't the policy before)
  • use request URI when selecting line key (further enhancement of the topic incoming calls were signalled on wrong line key (in case of multiple identities) from previous version)
  • support for more tone schemes (several tone schemes already available via Phone User Interface (PUI) weren't reflected at the web page before)
7.1.29
  • look for exact LDAP match on incoming e164 number (new setting ldap lookup ringing)
  • backward compatibility to v6 Regular Expression Dial Plan (the old Dial Plan is back)
  • restrict further outgoing calls on redial (it's not possible to dial accidentally twice via redial key anymore)
  • flash plugin works now independent of webserver mode (port for flash plugin was opened together with port for HTTP service, if HTTPS only was used, flash plugin port wasn't opened at all)
  • on update make the watchdog timeout much bigger (in case of an update the timeout is 1 hour)
7.1.28
  • display list of matches in response to PUBLISH (number-guessing)
  • changed default value for casing mic to 5
  • remove proprietary setting files from setting urls list if a snom file was found before
7.1.27
  • hard keys for DIRECTORY_SEARCH & PRESENCE work in edit mode
  • new Voicemail icon for active line (s360)
  • added Voicemail indication on status line (s300)
  • text message view through MWI state possible now (s300)
  • Voicemail soft key moved to S4 (s320)
  • Mute switch between S2 & S3 (always on S2, the positioning adjusts according to space: s320)
  • delay automated calls (redial, etc.) until line seize response is received (Broadsoft)
  • reboot once after setting conversion at traversal from v6 to v7 anyway
  • added personal message recording while offhook
  • change volume not allowed during free seating
  • remove dangling held call on cancel (server caused call drop)
  • special call acceptance through fkeys for active context (connected to nothing)
  • handle missing ack or cancel forwarded by server during hold
  • handle longer rewrite than match in Dial Plan
  • added on/off option for keepalive NAT
  • switch DHCP off during traversal from v6 to v7
  • new setting rtp keepalive to switch off RTP keepalive on hold calls
  • presence activities are mapped to activity ids before publishing
7.1.26
  • port 5061 was being dropped from URI
  • added watchdog usage
  • reset eth switch ARP table to prevent not working switch/DHCP on boot up
  • line seize subscriptions need to be throttled (Broadsoft)
7.1.25
7.1.24
  • added directory clearlight attribute
  • added <br> tag for SnomIPPhoneText
  • make register retry interval and subscription expiry configurable (new settings retry after failed register and user subscription expiry)
  • added support for MetaSwitch server type
  • PRACK usage can be disabled via new setting send prack
  • enhanced asking for password in case it was typed in wrongly
7.1.23
  • wireless headset enhancements with dantronic feedback
7.1.22
  • added support for URL with credentials like user:pass@host:port
  • local conference feature is limited to 3 parties
  • added sanity check for auto redial timer
  • Broadsoft SCA: skip line keys when they appear before Shared Line keys
  • ask up to three times for the right password if typed in wrongly
  • button control through PBX (new function key type button)
  • do not check SDP version if server type is Broadsoft
  • added new improved wireless headset controls
7.1.21
  • voice recorder call release fix
  • play busy/failed signal on call hold if setting release sound is set
  • show CFwd for all redirection types in status
  • text changes according to documentation
  • reload xml Idle Screen
  • settings flags were not properly reflected if taken from XML setting files
  • new value for vol speaker mic gain
  • added NTP timestamp
7.1.20

No Features.

7.1.19
  • F_DIRECTORY_SEARCH handles ldap & presence directory lookup
7.1.18
  • support for latin, latin-1, Latin Extended-A, Latin Extended-B, IPA Extensions, Spacing Modifier Letters, Combining Diacritical Marks, Greek and Coptic, Cyrillic glyphs (snom360)
  • support inbuilt snom melodies in Alert-Info (e.g. Alert-Info: <http://127.0.0.1/Ringer4>)
  • failover identity support using setting: user failover identity
  • support for 3 extension keypads added
  • Auto Dial was effected by Dial Plan timeouts
  • added preselect for menus and directories
  • dialed & received calls control per sip line
  • added support for cascadable sidecars
  • outbound proxy for emergency numbers
  • double talk improvement, fixed dial tone fluctuation in handsfree (when loud)
  • VLAN tagging support for incoming/outgoing packets via phone switch
7.1.17
  • star code exception handling e.g. *1*2*3*4 not to be confused as an ip address
  • expanded Dial Plan to support *79, [2-9].., etc
  • show generic message when Voicemail Boxdetails are not notified
  • HOLD phone symbol added for (snom300)
  • display version info on start up
  • enhanced unicode support (snom320)
  • clear old Dial Plan when provisioned
7.1.16
  • No Features
7.1.15
  • support for latin and latin-1 glyphs support (snom360)
  • optimized line wrapping algorithm
  • capital nordic AE added (snom320)
  • first line of Idle Screen is now utf8 save (snom320)
  • fixed Dial Plan xml with timeout 0 followed by a longer match
  • moved '+' more to the beginning on key 1
  • new Action URL variable 'active_url' to get the active registration
7.1.12
7.1.11
  • do not send "held-private" when call is retrieved
  • ethernet ports speed settings are now used even on bootup
  • syslog server setting is now used even on bootup
  • increased headset mic gain in new audio settings
7.1.10
  • ask for PIN while locking keyboard
  • added Call Pickup via access code on programmable function keys e.g. ext@dmn.org|*68
  • enable GRUU for subscriptions
  • changed default presence states
  • new setting "reject calls with 603" to reject calls with 603 instead of 486
  • new setting enable keyboard lock to allow keyboard lock feature
  • ethernet ports speed settings are working now on change
  • syslog server setting is working now on change
  • special character handling in directory fixed
  • image header for bootloader updates changed (snom300/snom320/snom360); new images are needed now for downgrading to v6
7.1.9
  • enabled dialing in presence, contacts and call monitoring states (snom360/snom370)
  • setting idle offhook to control handset offhook and idle state behavior
  • no general Dial Plan by default
  • call history was showing first local and then remote list
  • TRANSFER programmable key could not be remapped
  • adjust mic and volume settings during transition from v6 to v7
  • grey out text input fields if read only
7.1.8
  • added tone schemes for France, Italy, Netherlands, Norway and Spain
  • MENU key is programmable (snom320)
  • consolidation of factory provided menus on Settings key (snom320)
  • support current identity Voicemail Boxdependent on stk_mailbox_active
  • presence state can be changed via REG menu
  • speed up display refresh (snom370)
  • optimized directory search listing
  • presence status can be changed via identity menu (snom300)
  • conference on snom300 without key mapping
  • logoff line resets detailed user settings
  • added support for NTLM
  • added support for new shorter XML settings format (this is not backward compatible to the previous XML format in order you want to downgrade to an older v7 version)
  • changes to admin mode needs no reboot anymore to get applied
  • manually loading settings file is deleting phone book as well
  • user changes to NTP server got lost, fixed
  • lid is using RR scheduling now
  • a multicast rtp (streaming) fix
7.1.7
  • "adminmode" and admin mode password access to the webserver
  • save and export directory as CSV or XML format
  • replacing {prov_host} macro works even if setting server is an IP address or host name only
  • minibrowser available for c and snom320 as well
7.1.6
  • directory search list for LDAP and presence (snom360/snom370)
  • basic directory search using presence
  • handle MWI with same mw account & domain for different identities
  • http client authentication added; new settings http lient user, http client pass
  • added {prov_host} macro to be inserted into setting file urls to be replaced by current setting server host
  • use {prov_host} makro for default firmware status file retrieval
  • flash plugin is off by default (security reasons)
7.1.5
  • added ramdomized bootup delay
7.1.4
  • added "Registration failed" Action URL
  • added subscriptions log page
  • new default values for audio devices
  • reset settings deletes firmware setting as well
7.1.2
  • settings export can be done in plain old and new XML format now
  • improved tone scheme accoustic levels
  • set "failed" flag on not working update to prevent loops
7.1.1
  • Action URL for log on/log off
  • added auto connect for call monitoring
  • new conference layout for snom370
  • call monitoring state handles other keys as well
  • wizard asks for language again
  • show call status information (100 Trying/180 Ringing etc)
  • call monitor & presence can become default idle states
  • no restart needed on language changes anymore
  • timezone change doesn't need any reboot anymore
  • critical user settings do not need a reboot anymore
  • no restart required on programmable key changes
  • added tab indexing for html pages with help links
  • initial changes for handsfree improvement
7.0.20
7.0.19
7.0.17
  • MENU key is programmable
  • Option to disable programmed redirection (stk_redirect_ringing: Feature Request for Call Centres)
Bugfix
  • Fixed disabled ringer animation screen. (SCPP-437)
  • Consistent behaviour locking the keyboard. (SCPP-470)
  • Fixed showing guessed number (snom370). (SCPP-430)
  • Missed calls LED handling logic fixed. (SCPP-379)
  • Send reinvite after aborted transfer as well as the line is "on hold". (SCPP-467)
  • Fixed call pickup if intercom is enabled. (SCPP-495)
  • Randomize request source port and DNS query id. (SCPP-479)
  • Fix Speaker Volume Adjustment in Headset/Handset and Speaker Mode. (SCPP-480)
  • A picture from CALL-INFO header in a provisonal 18x was never shown (snom370).
  • Transport parameter was dropped on redirected register.
  • Initialization was broken.
  • By default answer_after_policy is set to "off". (SCPP-506)
  • Flash plugin didn't work with current Flash player releases due to new Flash security requirements. (SCPP-43)
7.1.38
  • Fixed disabled ringer animation screen. (SCPP-437)
  • Consistent behaviour locking the keyboard. (SCPP-470)
  • Fixed showing guessed number (snom370). (SCPP-430)
  • Missed calls LED handling logic fixed. (SCPP-379)
  • Send reinvite after aborted transfer as well as the line is "on hold". (SCPP-467)
  • Fixed call pickup if intercom is enabled. (SCPP-495)
  • Randomize request source port and DNS query id. (SCPP-479)
  • Fix Speaker Volume Adjustment in Headset/Handset and Speaker Mode. (SCPP-480)
  • A picture from CALL-INFO header in a provisonal 18x was never shown (snom370).
  • Transport parameter was dropped on redirected register.
  • Initialization was broken.
  • By default answer_after_policy is set to "off". (SCPP-506)
  • Flash plugin didn't work with current Flash player releases due to new Flash security requirements. (SCPP-43)
7.1.37
  • Wrong user image has been shown if a second call comes in (snom370). (SCPP-321)
  • LDAP lookup for incoming calls displayed wrong name when phone number contains same digits. (SCPP-70)
  • Removing an identity (that requires authentication) caused corrupt password prompt. (SCPP-283)
  • Fixed a couple of backlight issues (snom360, snom370). (SCPP-267)
  • Pickup worked via fkey but not via tick key or softkey (SCPP-306).
  • resolved sticky volume state (SCPP-262)
  • Fixed redirection via FKEY type BLF.
  • Holding reminder did not work. (see SCPP-319)
  • $remote parameter in action URL was indicating wrong number. (SCPP-349)
  • Fixed handling of deny-all for states ringing, connected and holding (SCPP-343).
  • Removed Identity settings when in user-mode. (SCPP-338)
  • Value dim for backlight on snom370 phone gui added. (SCPP-337)
  • Redial will use current identity if original id is unregistered except if current id is unregistered too.
  • Clear area of status line before repaint (snom360, snom370). (SCPP-388)
  • Play current user ringer during changing ringer volume. (SCPP-133)
  • Added type of answering for Intercom (new setting intercom_connect_type in contrast to auto_connect_type). You may select now the audio device you want incoming intercom calls to use. (SCPP-116)
  • Using Flexor Manager to select the outbound line to use, did not change the outgoing identity on the phone, if multiple identities were configured. (SCPP-365)
  • Call did not disconnect after on-hook when a minibrowser file is being displayed and an on_hook action url is set. (SCPP-8) *Three times and ongoing wrong http password will have the access restricted with one minute blocks only.
  • Added wiki help link to Fkeypage as well.
  • Fixed CSV-import for directory. (SCPP-384)
  • IP's are now parsed and corrected before saving, cause numbers like 192.042.001.042 were causing problems (IPv4 only). (SCPP-325)
  • Fixed a bug in XML decoding. (SCPP-285)
  • STUN derived port number was not reflected in SDP (SCPP-108)
  • Display name decoding must be done if remote display name is encoded via setting encode_display_name. (SCPP-73)
  • Fixed missing of WWW-Contact on Registration if do_http_contact says so. (SCPP-74)
  • Refresh publish presence if time expires and publish the last state on bootup. (SCPP-256)
  • If the phone received a "422 Session Expires Too Small" error in response to the first INVITE with the Session-Timer, hangup on the subsequent INVITE resulted in the phone sending a BYE instead of a CANCEL. (SCPP-339)
  • Old To and From Tags were not cleared if subscription was restarted. (SCPP-360)
  • Initial rtp-keep-alive was missing, which resulted in skipping of first seconds of MOH; if user_server_type is set to metaswitch do not send it. (#2008082810000098)
  • Fixed encryption of DTMF payload.
  • Polish special characters are displayed properly on new backlight display and at least as normal chars on old display. (snom300)
  • Delayed trap handling to fix issue which caused the phone to hang on bootup.
  • Fixed X-key to cancel a minibrowser slideshow. (SCPP-266)
  • Parsing and converting "&#…;" codes properly now. (SCPP-395)
  • ASN.1 encoded length fixed. (SCPP-363)
7.1.36
  • setting utc_offset wasn't used if it and dst was set without using timezone
  • hold on conference was not working (snom370) (SCPP-59)
  • BLF key wasn't working in off-hook state (SCPP-33)
  • incoming call was not rejected when the phone was in a conference and call waiting was turned off (snom370) (SCPP-150)
  • fixed conference in speaker phone mode
  • setting subscription_delay is working now
  • multiple DHCP OFFERs from different DHCP servers were confusing the phone, now it sticks to the first OFFER

7.1.35

  • CCNR was broken
  • in some instances, the wrong line key was selected on incoming calls
  • TFTP client was not resending ACK when a previously received data packet is received again
7.1.34
  • post Action URL disconnected on Call completed elsewhere
  • don't invoke auto-redial when line seizure times out
  • Audio was not switching to handset when it was lifted after a line key had been pressed
  • do not invoke dial plan when generating URI for call-info subscription
  • hold/retrieve was not working in some scenarios
  • missing password warning was shown on display even if ignore security warning was enabled (snom370), fixed
  • last held call was not presented first during transfer after implicit hold
  • extension key was not working with Broadsoft/MetaSwitch style shared line
  • channel was not being cleared completely after transfer while ringing
  • fixed typo at speed dial page
  • redirection * codes were not working
  • http scheme doesn't need restart to get applied
  • default value of http scheme was wrong, it's off now
  • changed G.726 payload type from 2 to 99
  • modified RTCP so that it also sends SDES CNAME with the RTCP SR
7.1.33
  • make park/pickup key available as soon as possible after operation (the park key was blocked for 3-5 seconds before. Now it is released and ready for any further pickup operation as soon as a successful parking is done)
  • on check-sync phone isn't hanging anymore in wizard state (the phone seemed to hang after a check-sync even though some keys were still working)
  • apply configuration parameters on check-sync (provisioned configuration parameters triggered by a check-sync were not properly

applied before)

  • check-sync is delayed until all channels are released (instead of making a reboot as soon as check-sync is processed, the phone will now wait until all active channels/calls are released and a harmless reboot can be made)
  • tuned list element allocation to save memory (list elements were allocated in chunks of 16 before, now it has been tuned for each single list element type respectively which reduces the size of initially allocated memory remarkably)
  • fixed adding new languages on check-sync (reading in a language list triggered by check-sync has caused a memory leak)
  • improved call control in registrations menu (incoming calls and media even in Reg menu is handled properly now)
  • append diversion/history-info for incoming call when animation is disabled (snom360) (this additional information was missing on display before)
  • fixed problem with remote unhold when local side is also holding (the phone was in an indeterministic state when the remote side made an unhold, now it should go to hold because of near side hold before)
  • adjust input when lead digits are appended in rewrite matches for XML Dial Plan (length of final match was being shortened after appending the lead digits before)
  • fixed speed dial 30 (prevent the phone to identify a dialed 030 as the speed dial 30)
  • fixed speed dial 9 (prevent the phone to identify a dialed 09 as the speed dial 9)
  • About menu is accessible during log-on wizard (to allow easy access to basic telephone information e.g. IP, Mac adr)
  • fixed password stutter (snom300/snom320) (editing a password was cutting the last typed digit/character)
  • added 128k memory bin for efficient memory allocation (this memory bin size was missing before so the next bigger bin was used instead which caused unnessesary memory allocation)
  • ringing calls were not shown in hold state (snom320/snom370) (since phone allows incoming calls in hold state, this information should be there for the user to decide to pickup or ignore the new call)
  • normalized placement of context- sensitive function keys across the various call states (to have an internally consistent presentation of context- sensitive function keys so the user does not press a soft key by mistake)
  • each dialed number replaces the same entry in the list instead of creating a new one (not only the last dialed record is updated but the complete dialed list is scanned and the previous entry for the same number is updated and put on top)
  • resubscribe for buddy list without search filter after directory search (in order to refresh the original buddy list if search responses were delayed for some reason. The complete buddy list becomes available again after directory search through presence is over)
  • [[Settings/action_connected_url|Action URL connected]] is requested at right state transition without effecting blind xfer (to keep the phone from posting an unintentional Action URL for connected)
  • clear allocated lines on failed pickup attempts (so the phone does not run out of keys and associated LED’s do not stay on)
  • changed Deny All soft key caption to Block (on text display of context- sensitive function keys on (snom360), both ‘Deny’ & ‘Deny All’ appeared as ‘Deny’ because of a lack of space on display. This caused confusion)
  • fixed scroll down on call monitoring state (scrolling down with navi key was not updating the list properly)
  • speed key on About menu was corrupting display
  • CANCEL key would clear desktop message completely (on small display phones, messages created via SIP MESSAGE with header Content-Type: text/plain were not properly cleared on pressing cancel)
  • dtmf after Action URL response was blocking audio
  • soft key cancel in calling state was not working
  • reboot the phone if configuration parameters got provisioned which need a reboot to get applied (like e.g. vlan, dhcp etc.)
  • Park was not working with Broadsoft-style shared lines
  • Minibrowser style received/missed call lists entry deletion was crashing the phone
  • fixed dtmf playback with CMC and Minibrowser (media path was being blocked before disabling dtmf)
  • set transport protocol to RTP/SAVP when SRTP is on (this is required by RFC 4568, but for backward compatibility this behavior is turned off by default; controlled by new configuration parameter user savp)
  • fixed wrong port number in contact/via header when transport is tcp/tls (the phone was sending the wrong port number in these headers when the transport protocol was TCP or TLS)
  • remote tag omitted when privacy is enabled (the tag provided by the remote side was omitted when privacy was turned on; this caused calls to fail)
  • fixed encoding of display name for special/reserved characters controlled by new configuration parameter encode_display_name (according to the RFC those characters have to be HTML encoded)
  • fixed timezone selection for China
  • phone switches to/from DST in time now (phone was switching to/from DST at the right date but not at the right time)
  • handsfree double talk improvement (we have enhanced double talk so that a person talking on the handsfree mic does not cut out the other side and is still heard by the other side without producing echo (option echoic). The old speaker phone behaviour is still available by using the room type quiet room, instead of echoic room)
  • fixed RTCP jitter buffer calculation (fixed problem in the calculation of jitter buffer stat only at the beginning of a call)
  • fixed an RTCP problem with packet loss field (fixed problem with packet loss field in the very first RTCP packet sent out by the phone in certain scenarios only, it was showing some packets lost when none had)
7.1.32
  • fixed Idle Screen date and headset device overlap (snom360) (some adjustment on placement of headset icon)
  • fixed potential issue for navigating in menu during language changes (was using the wrong language in that case)
  • fixed audio device switching off by MWI indication during a call (timer driven MWI indication was silencing media for active call)
  • fixed invalid soft key on F4 without CMC (snom360/snom370)
  • improved backlight operation in settings menu for incoming calls (backlight now shows ringing status of the new call)
  • Call Pickup dialog info was not working (snom300/snom320) (Call Pickup through display was not working on phones with small display)
  • ext.Keypad: removed bug that caused false reporting of 0 keypads
  • fixed ringing call acceptance using fkeys in address book (no need to go out of the phonebook just to accept a call)
  • fixed incoming call under Reg menu (call acceptance in this menu state was indeterministic)
  • make Dial the first option on main list menu (snom300) (no need anymore to browse through the available options to find the most often used function)
  • phone can handle now missing texts in language files (phone isn't crashing anymore on missing language texts)
7.1.31
  • improved number guessing cursor positioning on (snom300/snom320) (cursor was not being placed at the right position)
7.1.30
  • fixed inconsistent conference hold behaviour across all snom phones (both calls are on hold now)
  • fixed dtmf playback problem (redial/mwi) (was broken since topic fixed dtmf echo in settings menu when no channel is allocated in 7.1.27)
  • always show date in status line (s360) (messages like 2 Missed calls etc were erasing the date before)
  • suppress tone echo on mini-browser (no DTMF tones on digit key presses during minibrowser usage anymore)
  • speed dial numbers in programmable keys are not expanded into url's anymore
7.1.29
  • fixed wrong selected redial list (positioning of selected item was wrong by one)
  • fixed bug with secondary dial tone in handsfree mode
  • special characters for (snom320) are working again (support for special char display was broken in 7.1.28)
  • fixed button operation (e.g. pickup) in edit mode (function key type BUTTON only)
  • adding missed call number to directory wasn't working for snom360/snom370 (the wrong soft key was used)
  • fixed quick switch to search mode during dialing
  • incoming calls were signalled on wrong line key (in case of multiple identities)
  • wasn't sending out dialog subscriptions if broken registrar is on
  • watchdog wasn't running each time it should (even watchdog was enabled it did not start if either update host f or update filename)
  • explicitly stop watchdog on restart if it's disabled (before we were not able to stop the watchdog at all)
7.1.28
  • exact match in digitmap and timeout > 0 now handled properly
  • improved transfer handling
  • directory search requests sent only when alphanumeric character input is definite
  • handle key events mapped on fkeys in edit state (e.g. F_DIRECTORY_SEARCH on s300)
  • if there is no alert info for new call, then clean up old links
  • call forward busy wasn't working
  • fixed wireless headset signaling on GN9350 (outgoing calls)
  • fixed recording icon on incoming call
  • no duplication of Voicemail or SMS indication (s320)
  • improved random number generation
  • bytes greater than 127 were not properly converted by the XML settings export
7.1.27
  • improved personal message recording through idle state
  • fixed joined name scrolling problem (s320)
  • fixed dtmf echo in settings menu when no channel is allocated
  • fixed change volume while dialing
  • fixed certain invalid exact length Dial Plan matches
  • fixed a conference problem
7.1.26
  • auto-dial should not be invoked when line seize fails (Broadsoft)
  • fixed state switching/keypress freeze on s370 when call is put on hold remotely
  • fixed problem with nested messages
7.1.25
  • fixed Auto-Redial problem on Broadsoft Shared Line
  • fixed menu selection bug
  • fixed a jitter calculation in RTCP
7.1.24
7.1.23
7.1.22
  • fixed rendering of underscore for s360
  • only show About menu in idle state (fix for inconsistent behavior)
  • fixed edit mode soft key for s360
  • local_uri was being set wrongly for Call Pickup
  • reregister when Broadsoft returns a stale contact header on initial register after power cycle
7.1.21
  • fixed user interface menu context
  • send 603 only when user declines with cancel/deny key (new setting: reject calls with 603)
 7.1.20
  • if DHCP opt 66 or settings server were set to IP only, the specific file was retrieved before the general one
  • http port stops working, fixed
  • fixed support for Transfer-Encoding: chunked
  • fixed rare continuous dtmf problem in inband dtmf
7.1.19
  • scheme 'tel:' was not working well
  • fixed extension-keypad-bug (timing @init was still off, thus disabeling exp.KeypadsV2 in 7.1.18)
  • fixed sending first packet with wrong codec
  • old values were not overwritten by the same characters in a different case
7.1.18
  • fixed audio device left active ater MWI
  • naptr expansion was effecting all user inputs
  • fixed Idle Screen xml tree loading at startup
  • fixed crash on empty ip phone directory listing (snom300/snom320)
7.1.17
  • fixed crash during reboot
7.1.16
  • fixed wideband problem (with g.722)
7.1.15
  • fixed scrolling and incoming call issues (snom360)
  • Outbound Proxy setting was sometimes ignored
  • fixed crash related to closing subscriptions on reboot
  • fixed Presence directory search
7.1.14
7.1.13
  • fixed reboot problem
7.1.11
  • message LED wasn't always showing waiting messages properly
  • bootup properly even if update policy is set to never_update
  • multicast Mass Deployment was not working
  • assume that endpoint is not registered when 200 contains no contact header; this problem caused the reboot to hang
  • DNS addresses are now properly resolved for TFTP requests
  • number was expanded wrongly on function keytype intercom, if assigned identity was not registered
7.1.10
  • fixed recording indication on snom370
  • fixed stats co-ordinates for snom370 (after refresh acceleration)
  • dialog event list subscriptions (BLF) were not being started
  • STUN was broken
  • keep processing challenges after unknown authentication scheme is encountered
7.1.9
  • phone now reverts to previous call forwarding mode (after manual overriding)
  • fixed edit mode for transfer
  • fixed pnp and startup configuration on dhcp failure
  • multiple REGISTERs over TCP were not all authenticated
  • fixed problem with lost subscriptions
  • fixed initial skipping of audio packets problem
7.1.8
  • fixed auto leave from call monitoring state if callpickup dialoginfo is on (snom360/snom370)
  • fixed flickering on ringing animation (snom360)
  • fixed paging/dual audio problem at startup
  • fixed number guessing with directory search (snom360/snom370)
  • improved call release notification (snom370)
  • fixed unhold in certain 3-way conference situations
  • permission wasn't set correctly
  • fixed loop on "file not found"
  • fixed "file not found" message for big displays
7.1.7
  • fixed directory search for small display
  • fixed bug where CANCEL was suppressed in some transfer scenarios
  • the phone isn't hanging on start up anymore on TFTP requests even if DNS isn't working properly
  • no audio in some few cases, fixed.
7.1.6
  • fixed backlight on new settings structure
  • show simple msg if Voice-Message header is not set in NOTIFY
  • improved reset settings for function keys
  • max bootup delay takes effect immediately (power failure precaution)
  • do not add mac address to an URL already containing it
  • the phone isn't hanging on start up anymore on HTTP requests even if DNS isn't working properly
  • fixed ptime of audio packets to support 10 and 30 ms as well, so support extends to 10, 20, 30, 40 and 60 ms for most codecs
7.1.5
  • randomization improved
7.1.4
  • fixed main led for call monitoring (snom370)
  • fixed check config/splash screen on startup
  • improved log on wizard (controlled by stk_logon_wizard)
  • user interaction states do not interfere with audio
7.1.3
  • audio modifications including sidetone fix for speaker, handset and headset according to headacoustics data
7.1.2
  • fixed programmable key seize on redial
  • fixed send bye problem with RTCP stats
  • hold does not affect 1xx status display
7.1.1
  • fixed edit mode switching on graphical display
  • sip user password may have saved wrongly as "********" to setting file.
  • fixed tone scheme application
7.0.22
  • improved/fixed silence suppression (VAD/CNG)
7.0.21
  • phone got stuck after "-f" update, fixed.
7.0.20
  • fixed dual audio on mute
  • fixed reset settings performed via |style="background-color:#007abe;color:white;font-size:10pt;font-weight:standard;width:100%;"|Phone User Interface (PUI)
  • fixed setting permissions for Mass Deployment
7.0.19
  • corrections for Spain and Portugal
  • fixed potentially endless loops
  • image update "-f" is saving the settings as well now
7.0.17
  • fixed local line context mapping [broken registrar might be needed on in certain cases e.g. *]
  • fixed clock placement
  • fixed updated MWI on message txt reading
  • apply settings question was not shown anymore on web interface setting changes
  • whole partition update via web interface was destroying jffs2 fs structure
Personal tools
Interoperability