Firmware/V7/Release Notes/7.3.7-7.3.2

From Snom User Wiki

Jump to: navigation, search

Change Log between 7.3.7 and 7.3.2 beta release

Features
  • show number of provisioning attempts on the display
  • added Hebrew national language support for (snom370) and (snom320) as well
  • character order of Hebrew XML language files has changed (this means older hebrew texts for the Phone User Interface are not compatible to this version and vice versa, you will experience wrongly ordered Hebrew characters)
  • added additional functionality for fkey type key event; F_TRANSFER:700 would transfer the connected call to destination i.e. 700 (not the incoming call)
  • suppress individual dialog subscriptions when eventlist is on (Broadsoft)
  • change reading direction according to language name (Hebrew reads right to left)
  • supports now Hebrew and special chars like the lock symbol in one image (snom300 with PoE); this means Hebrew support is now part of the usual release and doesn't need an extra image to get displayed properly on (snom300) backlight displays
  • improved audio feedback with auto dial on busy signal
  • duration display for a connected call on (snom370) is hh:mm:ss
  • show IVR dtmf on display during connected state (snom370)
  • consistent behavior for incoming calls in menu states
  • new setting show ivr digits to control digit display while connected (snom360/ 370)
  • unicode characters are displayed properly in title line and soft key texts on (snom360)
  • added settings subscription delay, terminate subscribers on reboot and functionality (from v6.5)
  • show uboot version, uptime and memfree on system info page
  • support for $display local, $display remote, $expansion module, $active key in Action URLs (also within path)
  • print out uptime and memfree to the (sys)log once a day
  • show uboot version on OID 1.3.6.1.2.1.7526.2.4 as well
  • new OIDs 1.3.6.1.2.1.7526.2.7 and 1.3.6.1.2.1.7526.2.8 for memfree and uptime respectively
  • language files can be loaded via TFTP as well
  • modified RTCP so that it also sends SDES CNAME with the RTCP SR
  • show HTTP/Admin password warning on display dependent on ignore security warning
  • LDAP/Directory Search list dials selected contact on handset offhook
  • soft keys for Mute/Unmute are not hidden when redundant fkeys setting is off
  • F LOGON USER can be used on all phones for hot desking (log on/log off user accounts)
  • F LOGOFF ALL prompts log on wizard if logon wizard setting is on
  • Disabled 5 sec. lock on shared line key for Broadsoft/MetaSwitchas this is handled by line seize throttling mechanism
  • block programmable keys while Broadsoft-style shared line is seized
  • 200 OK without SDP is ok when SDP was received in earlier message
  • help link of setting user q corrected
  • fixed timezone selection for China
  • rework of SnomIPPhoneText, better line breaking and <br/> tag support
  • added new {index} parameter for SoftKeyItem (The index parameter is the linenumber in a minibrowser list. e.g. http://192.168.0.55/index.xml?idx={index})
  • new setting offhook dial prompt controls if dial prompt is offered on Offhook and it's on by default (You may not want to make the phone busy by just taking the handset offhook. If this setting is turned off, the phone will continue to show the standard idle display even when the handset is offhook.)
  • post Action URL disconnected on Call completed elsewhere. Technically this call has been received by someone else, however to complete the transition from ringing to call end, Action URL disconnected is called to let the server know.
  • new programmable key type IVR. (The argument is a number that is dialed on key press i.e. sending out an INVITE. Once the call has been established, pressing the same IVR key would send out dtmf digits comprising that number. This can be used to control IVR applications by one key only.)
  • hebrew character support
  • user customised Alert-Info texts/files using built-in melodies (If the value of setting internal ringer text matches the incoming INVITE alert-info header, use the internal melody set up in internal_ringer_file to play the appropriate internal melody for a customized alertinfo.)
  • basic CSTA call control features (phone can be remotely controlled via CSTA protocol)
  • support for more Action URL events
  • added setting show diversion to control display of Diversion header info included in the incoming INVITE
  • new makro prov_host which can be included into provisioning URLs (like mac) in order to get replaced by the setting server host name which has been set differently before. (This makes the usage of provisioning URLs much more dynamic.)
  • added a list for tftp requests to make sure only one request runs at a time
  • firmware status file can be loaded via TFTP as well
  • firmware can be updated via TFTP as well
  • XML language files can be retrieved via TFTP as well
  • firmware update mechanism optimized to use less main memory during update process
  • added bootloader lock mechanism (together with the appropriate bootloader the phone can lock the tftp update option in the bootloader to establish for instance an ITSP lock)
  • new user_server_type nortel
Bugfix
  • programmable keys 6 and up were blinking at a lower frequency on incoming calls
  • last held call was not presented first during transfer after implicit hold
  • extension key was not working with Broadsoft/MetaSwitch style shared line
  • channel was not being cleared completely after transfer while ringing
  • if uboot version string is corrupt, don't store it anymore (this may fix the issues provisoning server had with the added corrupt uboot version in the HTTP client header)
  • it retries the provisioning request several times on internal error codes 500 (ICMP error tftp / read error http), 400 (DNS timeout tftp/http) and 408 (tftp error), this may fix the well known STP issue on startup provisioning wise
  • missing password warning was shown on display even if setting ignore security warning was enabled (snom370), fixed
  • redirection * codes were not working
  • setting http scheme doesn't need restart to get applied
  • default value of setting http scheme was wrong, it's off now
  • on error code 500 (which may mean ethernet port isn't open, most probably due to a switch which blocks it temporarily) retry the request several times
  • Park was not working with Broadsoft-style shared lines
  • don't invoke auto-redial when line seizure times out
  • Audio was not switching to handset when it was lifted after a line key had been pressed
Personal tools
Interoperability